Group Description

Central Engineering AMS-IP team provides leading-edge SerDes PHY solutions and other Analog Mixed-Signal IPs to support all Marvell products.

What You Can Expect

Seeking a Senior Staff Analog IC Designer to be part of a Marvell's central engineering team designing highly sophisticated CMOS transceiver/SERDES/PLL products. Responsibilities would span architectural investigations and implementation for circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, CDRs etc. to meet key performance targets and performing design verification using industry standard tools such as SPICE, Spectre, MATLAB etc.

In this role, successful candidate will lead a team of analog design engineers, interface with layout, verification, and application teams and manage delivery of analog IP to successfully bring designs from concept to production.

What We're Looking For

Master’s degree and/or PhD Preferred in Electrical Engineering or related fields with 5+ years of experience. A successful candidate should have experience in some of the following designs:

PLL, Data Converters, Oscillators and high-speed SerDes design including Receiver and Transmitter design.

Experience in Single-ended High Density Parallel Interface for Chip to Chip Communication, D2D interface

Experience with analog design and verification tools (Virtuoso, Spectre, ADE and post layout extraction tools) is a must

Knowledge of the fundamentals on signal integrity improvement, noise reduction and Multi-GHz low-jitter clock generation & distribution.

Good understanding of analog layouts in FinFet and its effect on high-speed designs

Experienced in system level pre-tape out analog validation

Experienced in lab chip bring-up and debugging efforts

Strong communication skills

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Description & Requirements

In your new role you will:

• Responsible and maintain a group of Final Test Equipment
• Drive & improve equipment uptime performance to achieve target equipment efficiency
• Drive & implement maintenance cost, quality & yield improvement project
• Preventive and predictive maintenance improvement program to maintain equipment stability
• Equipment spare part management
• Impart equipment knowledge and skill to shopfloor maintenance team to develop strong skilled maintenance team
• Troubleshoot and resolve major breakdown equipment
• Strong in Mechanical Tolerance and baselining, handler critical parameter control (eg. mechanical alignment, pressure , motor) and Jam statistics analysis

You are best equipped for this task if you have:

• Degree in Mechatronic /Mechanical/Electronics/Electrical Engineering.
• Min 5 - 8 years of experiences in final test equipment in semiconductor industry
• Experience in Tri temp gravity feed IC Test Handler is must
• Experienced on MT9928/RA1800/RA1000 is preferred
• Strong knowledge in applying problem-solving and analysis tool, e.g., 8D,5 whys, QC tool
• Technically sound and strong desire to build up technical competency
• Able to recommend design change to improve equipment performance
• Passionate in problem solving and hands on
• Project management experience and proactive communicator to provide timely update to various stakeholder

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

As a Staff Engineer in the Product Engineering organization at Marvell, you will be part of a brilliant growing team of engineers that solves complex problems. In this role, you will be working with our design, product & test development team in US and in APAC; supporting new product introduction projects & activities to ensure smooth transition of these new products from development to manufacturing phase. You will also be responsible for developing and tracking the fully life cycle of the project from beginning to its final completion

What You Can Expect

• Responsible for New Product Introduction, initial phase of silicon bring up working with NPI Product and Test team.
• Collaborate with cross functional teams, (Test, Foundry, Reliability, Engineering teams) to drive NPI development.
• Analyze yield at engineering sample phase and characterize NPI product performances and manufacturing yield window
• Perform data and statistical analysis on wafer sort and final test
• Support test engineering on resolving test program related issues
• Plan and drive for (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals

What We're Looking For

• Bachelor or Master’s degree in Electrical Engineering or related fields and 3-5 years of related professional experience.
• Working knowledge of Automated Test Equipment (ATE), Advantest 93K, test handler, is a plus
• Strong analytical skills and statistically literate. Knowledge of yield analysis, quality management tools

#LI-UN1

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

The job comes under NPI Operations and supports Product & Test Engineers in test development, product qualification & manufacturing release. Additionally, the job supports production & planning teams to make use of spare capacity for revenue attainment purpose. The scope covers managing Marvell testers, handlers, probers & hardware with focus towards operational readiness and continuous improvement.

What You Can Expect

Work with product / test / equipment engineers and external vendors to buy, maintain, repair and setup test hardware for NPI projects.

• Drive actions to achieve high uptime for hardware items like sockets, load boards, probe cards & accessories.
• Develop procedures, system for HW storage, maintenance & repair.
• Do simple board level soldering for component replacements & jumpers.
• Publish HW status to stake holders on periodic fashion.

What We're Looking For

• Diploma or relevant vocational qualification with 5 years of experience in HW support for ATE / Handlers / Probers.
• Hands on experience in service & repair of high pin count test sockets, load boards, accessories.
• Experience in change kit buyoff for Hon Tech, North Star & Chroma handlers.
• Fast learner, team player, ability to juggle multiple tasks.
• Familiarity in ISO-9K, MS-Office tools, HW stock keeping.

#LI-SYU

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Description for Customer Experience Administrator:

• The job holder will provide administrative and operational support to the Strategic Engagement Division, and to handle and respond to queries from members of public and party candidates in a timely manner.
• You will also be involved in administrative work and other helpdesk services as required, to support the business functions of the organisation.
• The job holder needs to have analytical skills to understand queries received through various service touchpoints and provide appropriate advice in accordance with existing guidelines and have strong writing skills to be able to craft professional replies to members of public and party candidates.

Requirements:

• Service quality mindset, with at least 3 years of relevant customer service experience
• Proactive team player with strong verbal and written communications and interpersonal skills
• Basic knowledge of MS Office applications (Microsoft Word, Excel, Outlook etc)
• Prior working experience in the Public Service Counters will be an advantage
• Must be prepared to work extended hours under pressure during the busy period

Contract Period: 11 months 29 days

Working Arrangement: Mondays to Fridays 8.30am to 6pm

Location: Novena Rise

Salary: $2500 to $2,700

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Develop run sets for nanotechnology and support Calibre and provide user support for DRC and LVS debugging to streamline physical verification flow. Automate and support physical verification flow for internal design tools group. Support tape-out and design-related foundry interface activities, physical verification CAD flow, and CAD flows for SOC integration. Develop and maintain validation procedures for physical verification flow and prepare user guides and documents. Job duties include some usage of full custom layout tools to review results and create validation test cases.

What You Can Expect

• CAD and EDA Tool Development: Develop and maintain advanced CAD and EDA tools and methodologies for digital and analog IC design, verification, and physical implementation.
• Tool Integration: Integrate various EDA tools into an efficient and cohesive design flow, ensuring seamless interoperability and maximizing design productivity.
• Methodology Development: Define and optimize design methodologies, flows, and best practices for efficient and reliable chip design, from physical verification to SoC tapeout
• Design Automation: Automate design tasks, including physical verification flow, design rule decks, automate layout migration, to improve design efficiency and reduce time-to-market.
• Tool Evaluation and Selection: Evaluate and select third-party EDA tools, libraries, and IPs to meet project requirements, considering performance, scalability, and cost-effectiveness.
• Collaboration and Support: Collaborate with cross-functional teams, including, foundry engineers, design engineers, layout designers, and software developers, to provide technical guidance, support, and training on CAD and EDA tools and methodologies.
• Tool Performance and Maintenance: Monitor and optimize tool performance, addressing any issues or bottlenecks, and ensuring tool reliability, stability, and usability across design projects.
• Industry Awareness: Stay up-to-date with the latest advancements in CAD and EDA tools, methodologies, and industry trends, and provide recommendations on incorporating new technologies to enhance design capabilities.
• Documentation and Training: Create and maintain comprehensive documentation, user guides, and training materials for CAD and EDA tools and methodologies, enabling efficient knowledge transfer and onboarding of new team members.

What We're Looking For

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and 7+ years of related professional experience. Master’s degree and/or PhD in Computer Science, Electrical Engineering or related fields with 3 years of experience.
• A minimum of 7 years of experience in CAD and EDA tool development and support, preferably within the semiconductor industry.
• CAD and EDA Expertise: In-depth knowledge and hands-on experience with industry-standard EDA tools and methodologies for digital and analog IC design, verification, and physical implementation. Proficiency with tools such as Cadence, Synopsys, Mentor Graphics, and scripting languages like Tcl, Perl, Python, Mentor Calibre svrf / tvf is required.
• Design Flow: Strong understanding of the complete IC design flow, from front-end design (RTL, synthesis, simulation) to back-end physical implementation (place and route, timing analysis, physical verification).
• Problem-solving Skills: Demonstrated ability to analyze complex design and tool-related issues, propose innovative solutions, and drive them to completion.
• Team Collaboration: Excellent interpersonal and communication skills, with a collaborative mindset and the ability to work effectively with cross-functional teams.
• Leadership: Proven experience in leading projects or initiatives, providing technical guidance, and mentoring junior engineers.
• Continuous Learning: Strong motivation for staying abreast of the latest advancements in CAD and EDA tools and methodologies, and a passion for innovation and continuous improvement.

#LI-UN1

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

As a test development staff engineer in the Operations business group, you will test features on the silicon semiconductor chips Marvell produces for internal and external customers. You will make sure we don’t ship out any underperforming units. You’ll work closely with design to make sure their chip features are testable and that the results meet the customer’s specifications. You may even have to write new code or develop new testing strategies when our chips outpace the capabilities of current testing equipment.

What You Can Expect

• As an ATE Engineer, you will be responsible for developing test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of very high performance networking semiconductor devices.
• You will need to be able to utilize the ATE equipment tools and capabilities to optimize its performance without compromising the quality of outgoing products.
• You will also be responsible for developing and tracking the fully life cycle of the project from beginning to its final completion.
• You will be developing test plans and supporting various phases of manufacturing. Be responsible for design, development and verification of new firmware features

What We're Looking For

• Education: BS in EE (Specialization in Semiconductors)

• Skill in Advantest 93K ATE tester

• Knowledge of high speed ATE hardware design

• Skill in programming/scripting (C & C++ or Python or Perl)

• Knowledge of Digital and Mixed Signal design and test

• Demonstrate excellent written and oral communication skills

• Demonstrate project management, team work and leadership necessary for successful project completion

#LI-UN1

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Marvell’s focus on cloud data center connectivity solution enabled our customer to move data inside and between cloud data center faster and more reliably. The PAM4 DSP technology enabled 200G, 400G and 800G data transfer rate within the data centers. The Coherent DSP technology enabled 100G and 400G data transfer rate between data centers. Marvell is the enabler and partner of world’s leading cloud hyper scalers in area of transferring data from Copper PHY to the world of Optics.

What You Can Expect

As a Senior Staff Engineer in the Product Engineering organization at Marvell, you will be part of a brilliant growing team of engineers that solves complex problems. In this role, you will be working with our design, product & test development team in US and in APAC; supporting new product introduction projects & activities to ensure smooth transition of these new products from development to manufacturing phase.

• Responsible new product introduction initial phase of silicon bring up working with NPI Product and Test team in the US to validate new device features and test/DFT methodologies.
• Collaborate with NPI PE, Test, Foundry and Reliability Engineering teams to drive NPI development of highspeed datacenter products and their variants.
• Analyze yield at engineering sample phase and characterize NPI product performances and manufacturing yield window including bench correlation to meet product cost targets.
• Perform data mining and statistical data analysis on wafer sort and final test parametric to support initial product assessment.
• Perform functional testing and analysis to ensure product operation and reliability.
• Support test engineering on resolving test program related issues.
• Support volume engineering sample supply for early customer engagement.
• Plan and coordinate (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals.
• Engage & manage Test Sub-con in early production stage
• Collaborate with HVM PE to identify and drive production capacity improvement after production release via test time reduction, yield improvements, qualifying alternate sources etc.

What We're Looking For

• B.S. in Electronics/Electrical Engineering or related field. M.S. preferred
• Minimum 7 years of experience in the semiconductor industry
• Solid understanding of semiconductor manufacturing and device physics
• Strong analytical skills and statistically literate. Knowledge of yield analysis, quality management tools, GR&R, Cp, Cpk.
• Working knowledges of Auto Test Equipment (ATE), Adventest 93K, UltraFlex, test handler, wafer prober is a plus.
• Demonstrated proficiency with strong hands-on test development and debug skills
• Self-directed, capable of managing complex projects, working individually and collaborating with other technologists to achieve objectives
• Excellent communication skills, including written and spoken English

#LI-UN1

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Responsibilities:

• Handle user account requests, ensuring accuracy and compliance with established protocols
• Maintain a methodical record of user account details and updates in designated database
• Respond to user inquiries regarding account requests in a timely and professional manner
• Collaborate with other team members to streamline account request processes
• Generate regular reports on account status, user activity, and other relevant metrics
• Provide administrative support and any other ad-hoc duties, if assigned

Qualifications and experience:

• Fresh ITE/Polytechnic graduates are welcome to apply
• Proficient in using office software for data entry, communication and report generation

Location: Buona Vista

Salary: TBA

Contract Period: 9 months

✨Taiseng MRT. 39 MacTaggart Rd (8mins)

(Halal-Certified Suppliers) FULLY SPONSORED FHC!

5.5 DAYS OF 6 DAYS OFF PER MONTH

https://forms.gle/DyTYJX85djRbcPAf9

✨Benefits✨

· Overtime pay

· Variable Bonus (Full Timers Only)

· Medical and Health Insurance benefits

· Attendance Allowance

· Weekend Allowance (only Full Timers and Part Timers eligible)

· Uniforms provided

Working hours

· 8.30am to 5.30pm

· 44 hours per week (with overtime)

· 5.5 days’ work or 6 off days per month

· Half day – 8.30am to 12.30pm

* SINGAPOREANS ARE WELCOME TO APPLY! *

Job Description

· Handling of high volume of food production

· Preparing sauces, spices and marinates based on standard recipes

· Preparing raw ingredients and cooking of soup

· Packing of food and ensure proper storage

· Cleaning of equipment and waste disposal

· Maintain cleanliness at workstations

· Manage loss/risk prevention

· Manage production line

· Handle any other duties assigned by direct supervisor

Job Requirements

· Willing to learn and positive attitude

· Able to start work immediately

· No prior experience is required

· Candidates with Food Hygiene Certification is preferred

· Able to work shifts, weekends, and public holidays

Job Scope:

· Support daily safe operations of school in the following areas;

a. Opening and closing of school.

b. Cleaning of General Office, Staff Rooms and Special Rooms.

c. Support logistical arrangements school events.

d. Stocktaking and ordering of school supplies (e.g. toilet papers, trash bags and etc).

e. Traffic control and marshalling (during arrival and dismissal) within school compound.

· Assist Operations Manager in maintaining school security (e.g. escorting contractors and vendors during maintenance works in school compound.

· Able to communicate and work in teams.

Requirements:

- Physically fit and mobile;

- Relevant work experience in canteen and operation with a school is advantageous;

Contract period: 01 April 2024 to 28 February 2025

Salary: $1700-$1800/month

Working Arrangement:

· Mondays to Friday:

· Early Shift (6.00am to 3:30pm, inclusive of 1 hour lunch break

· Late shift (9.30am to 7.00pm, inclusive of 1 hour lunch break

· Service not required on Saturdays, Sundays and gazetted public holidays

Job description
In your new role you will:

• Prepare and develop test program definition for both wafer and package test
• Ensure compliance to test program procedures and releases to production
• Liaise with different stakeholders internally and externally to ensure test programs are released accordingly per project schedule and deliverables
• Able to deep dive technically and debug test programs issues to ensuretimely deliveries* Able to communicate at all levels and updates of status per required

Your profile
You are best equipped for this task if you have:

* Bachelor's Degree in Electrical and Electronics Engineering
* Knowhow in microcontroller is an added advantage
* Knowledge in v93k tester platform and burn in stress testing environment
* Good troubleshooting skills
* Python, C++, VBA and VB.net programming skills needed
* Good in communication skills and presentation for both technical and project status

Driving decarbonization and digitalization. Together.

Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software.

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.

Primary Duties & Responsibilities

• Maintain software systems or software enhancements of existing products

• Support ME and Production in analyzing product failures on the line and take ownership to find

solutions to resolve related software issues.

• Project manage outsource software development service providers from design conceptualization

phase, development, validation, completion and maintenance of software projects with the

automated equipment.

• Responsible for the design and development of test solutions in terms of hardware design and

software coding for manufacturing tests. Understand customer test specifications and test

requirements.

• Perform system integration, debug, and conduct system repeatability study and optimization.

• Brainstorm and provide ideas, suggestions, and solutions to the various approaches to testing

products

Education & Experience

• Bachelor's Degree in Software Engineering /Information Technology /Computer Science or

equivalent.

• At least 5 years of relevant working experience in Test Engineering, Test Development, or

equivalent working experience in a manufacturing environment.

• Experience in C++, C# and Labview programming preferred.

• Good Experience and knowledge in Industrial Automation.

• Strong project management skill with experience in working with outsource software developers.

• Test and measurement instrumentation exposure and experience in software development for

remote equipment control are required.

• Experience in NI-LabVIEW, NI-Test Stand, C#, and Python programming is required.

• Experience in SQL with advanced query design, stored procedures, views, and functions.

• Understanding of Database Administration (e.g.: replication, backup/restore strategies, clustering,

log-shipping)

• Understanding of HTML, and CSS programming.

Skills

• Team player, passionate about production process automation and productivity improvement

towards Industry 4.0.

• Excellent interpersonal skills with good verbal and written communication skills.

• Self-directed and able to work independently with little or no direct supervision.

• Work effectively with other members of Coherent Singapore

Coherent is currently hiring a Manufacturing Engineer to work at our manufacturing site located

in Singapore. We are looking for a hands-on candidate for our industry-leading laser technology

products. The Manufacturing Engineer will develop, evaluate and improve manufacturing

methods and processes for the purpose of sustaining the manufacture of existing Laser products

as well as the introduction of new products.

Primary Duties & Responsibilities

The Manufacturing Engineer will provide day-to-day technical support for the production line

including cleanroom, sub-assembly, optical build, and laser final test areas:

• Maintain the quality, reliability, and cycle time standards of the current laser build process.

• Continuously improve current production methods using knowledge of product design,

materials and parts, fabrication processes, tooling, production equipment capabilities,

quality control standards, and warranty metrics.

• Take responsibility for electronic travelers, assembly and process methods, and bills of

materials.

• Work with quality, reliability, and supply chain teams to improve product performance.

• Implement corrective actions for problems reported by our customer.

• Works on complex problems where analysis of situations or data requires an in-depth

evaluation of various factors.

Education & Experience

• A bachelor’s degree in engineering (BEng) or its equivalents with at least 5 years of

relevant work experience in Photonics or a related manufacturing field

• Experience in a High Mix-Low Volume manufacturing environment

Skills

• Possess technical expertise pertaining to Manufacturing, Assembly & Test Processes for

mechanical assemblies, PCBA and optical components.

• Strong problem-solving skills and excellent knowledge in Six Sigma DMAIC approach,

Lean principles, DOE, SPC, FMEA, GR&R and other quality improvement tools. Certified

Six Sigma Green or Black Belt will be an advantage

• Excellent interpersonal skills with good verbal and written communication skills.

• Self-directed and able to work independently with little or no direct supervision.

• Work effectively with other members of Coherent Singapore

Job Description

• Has in-depth knowledge in own discipline and basic knowledge of related disciplines
• Uses best practices and knowledge of internal or external business issues to improve products/services or processes
• Typically resolves complex problems or problems where precedent may not exist
• Often leads projects or project steps within a broader project or have accountability for ongoing activities or objectives
• Act as technology expert to provide leadership for colleagues with less experience or may formally train junior staff

Job Requirements

• Bachelor Degree in Information System/Software Engineering/Computer Science or IT related fields
• Min. 6 years of relevant working experience
• In-depth knowledge of design principles and experience in technical design
• Motivated, proactive and resourceful in exploring new technology/framework independently
• Excellent communication skills and collaborative teamwork attitude

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

The job comes under NPI Operations and supports Product & Test Engineers in test development, product qualification & manufacturing release. Additionally, the job supports production & planning teams to make use of spare capacity for revenue attainment purpose. The scope covers managing Marvell testers, handlers, probers & hardware with focus towards operational readiness and continuous improvement.

What You Can Expect

• Design and implement digital circuits for automotive electronic application
• Develop digital architectures that meet automotive industry standards for reliability, safety, and performance.
• Write and optimize low power Register Transfer Level (RTL) code, implement and simulate digital designs to ensure functionality and performance requirements are met.
• Develop and execute verification plans to verify the correctness of digital design and ensure designs meet automotive safety and quality standards
• Work closely with a cross-functional team for product development
• Create and maintain detailed design documentation, including specifications, datasheets, and verification plans.
• Work with implementation to achieve optimal timing, area, performance, and power goals

What We're Looking For

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and 3-5 years of related professional experience. Master’s
• degree and/or PhD in Computer Science, Electrical Engineering or related fields with 2-3 years of experience.

#LI-UN1

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job description

In your new role you will:

• Drive data quality and completeness for our subcontractors around Asia
• Support product engineers with data or analysis tool problems
• Develop systems and processes to enhance test data quality and completeness
• Work with our local and multi-national team on advanced digitization projects related to test

Your Profile

You are best equipped for this task if you have

• Bachelor Degree in Engineering, Data Science or related field
• 5+ years Product Engineering or Yield management experience in Semiconductor manufacturing or related field
• Able to work independently, creatively and as part of an international team
• Solid understanding of basic statistics (i.e. 6 sigma)
• Some programming experience (C#, Python, SQL, MS Office, ML, AI, etc.)
• Organized, curious, data driven and able to understand complex data systems
• High level of English proficiency for presentation and communication with internal and external stakeholders
• Understanding of front-end & backend semiconductor manufacturing and experience with statistical Software (R, PDF Exensio, Synopsis, JMP, etc.) will be an added advantage

Benefits

What we offer you in Singapore

Singapore is our regional headquarter for Asia-Pacific and consists of production, research & development, sales & marketing, supply chain and many central functions.

Find out more about our location Singapore

Why Us

Driving decarbonization and digitalization. Together.

Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software.

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.
Click here for more information about Diversity & Inclusion at Infineon.

• To monitor, collect data, analysis and report the plant facilities system performance, resources efficiency, abnormality and breakdown of plant facilities
• To conduct training and generate or update work instructions, work risk assessment and failure mode effect analysis on respective plant facilities system, equipment or process related
• To carry out continuous improvement projects for facilities
• To supervise the contractors and ensure that the contractor safety handbook and housekeeping protocols are adhered to strictly
• Support other functions’ continuous improvement programs and projects
• Response to emergency situation during office hours and non-office hours, weekend and public holiday when necessary

Your Profile

You are best equipped for this task if you have:

• Diploma / Bachelor's Degree in mechanical engineering, electrical engineering, mechatronic engineering, building services or facilities management
• Minimum 5 years of relevant experience in facilities engineering, maintenance or management in manufacturing environment
• Have a strong technical understanding of mechanical, electrical, and plumbing systems, as well as building automation and control systems.
• Proactive in resolving problems and have a strong focus on safety to ensure compliance with relevant safety regulations.

Benefits

What we offer you in Singapore

Singapore is our regional headquarter for Asia-Pacific and consists of production, research & development, sales & marketing, supply chain and many central functions.

Find out more about our location Singapore

Why Us

Driving decarbonization and digitalization. Together.

Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software.

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.
Click here for more information about Diversity & Inclusion at Infineon.

Job Scope:

· To assist SCD managers to collect, confirm and compile school FM asset from various MOE schools.

· This includes scheduled visits to different schools across Singapore to collect, confirm and compile FM asset data and performing due diligence checks on existing data.

· Good IT skills with proficiency in MS Excel is essential.

· Physically fit and able to walk for long periods.

· Able to work under tight timelines.

· Able to work closely with school representatives and managing agents.

· Meticulous and able to work with minimum supervision.

· Possessing own transportation is an advantage.

Requirement:

· Experience in estate management, building maintenance, building related experience in consultancy or Managing Agent firms, preferably with a minimum of 1 year in the respective position/field.

· Preferably candidates with mechanical, electrical engineering or facility management background

· Diploma or Degree in building related disciplines (e.g., estate management, building maintenance, architectural, quantity surveying, civil/ structural/ mechanical or electrical engineering)

· Those without a building-related diploma or degree, and with relevant experience and expertise may also apply.

Working Location: Ghim Moh Rd

Salary: TBA

Contract: 3 months

Working Arrangement:

· Fridays: 8:30am to 5:30pm, inclusive of 1hr lunch break

· Service not required on Saturdays, Sundays and gazetted public holidays.

Typically, 4 days on-site (schools) and 1 day in office.

Job Description:

• Manage the sourcing and procurement scope of indirect commoditiesrelated to IT, R&D , consulting, facilities management, transportationand logistics, temporary labor services, travel, site services etc
• Drive the quotation processes, define evaluation criteria, identifyand select suppliers, execute the evaluation process, refine andvalidate sourcing and purchasing options, manage buy-in of keystakeholders
• Manage contract information and negotiate with vendors to obtain thebest possible terms to ensure that portfolio has consistent informationand renewals or termination due date are under control
• Responsible to execute Purchasing functions in compliance with globalinitiatives, standard procurement processes, procedures and policies
• Drive Suppliers evaluation and manage claims management
• Recommend process improvements and develops continuous improvementtools
• Continually look for ways to exceed customer’s expectations, increaseefficiency implement better processes and achieve cost savings globally

Job Requirements:

• Degree in Business Management or Supply Chain Management or a relatedfield
• Relevant experience in SAP , Ariba or other tools is preferred
• With 5 to 8 years or more experience in the Indirect Procurement
• Self management , self motivated

Responsibilities

Key tasks include:

1. Manage the Pulau Ubin Micro-grid project;
2. Oversee and manage project management and grant administration efforts for R&D projects, including to:
   1. Monitor project progress, manage project virement and variation requests, ensure the timely submission of audit and progress reports by grantees, check and process claims submitted by grantees, and check and process invoices raised by Finance for disbursement of grant funding to grantees;
   2. Support the department in providing updates to relevant agencies on budget projections, project progress, and funding utilisation for R&D funds;
   3. Work with Finance to streamline grant administration and project management processes, including exploring the use of digital tools and data analytics to support these efforts;
   4. Improve EMA's grants governance processes; including ensuring that EMA's Grant Management Handbook adheres to NRF's guidelines, and updating the Handbook where necessary; and
3. Support the department's efforts to develop a grid capability roadmap, to identify the grid capabilities needed to support the Singapore Energy Transition and develop strategies to achieve them. This includes organising and supporting workshops and meetings where needed.
   

Requirements:

1. Degree in any discipline
2. Independent, meticulous, detail-oriented, self-motivated and responsible
3. Good communication skills (oral and written)
4. Proficient in MS Office applications
5. Proficiency in data analytics/automation tools (e.g., Tableau, PowerBI, RPA) will be an advantage
   
   .

Working hours: 8.30am to 6pm (Mon to Thu) and 8.30am to 5.30pm (Fri)

Working Location: Alexandra Road

Contract: 9-months

Salary: TBA

Job Opportunity: Staff Nurse

Location: Multiple Locations

Are you a dedicated and compassionate registered nurse looking for a fulfilling opportunity to make a positive impact on the lives of patients in need of specialized care? Join our team as a Staff Nurse and play a vital role in providing essential healthcare services to chronically ill patients in the comfort of their homes.

Responsibilities:

• Home Visits: Conduct home visits to attend to chronically ill patients referred for care.
• Nursing Assessment: Perform comprehensive nursing assessments on patients.
• Medical Coordination: Coordinate with physicians for medical assessments and arrange follow-up visits for patients.
• Medication Management: Monitor patients' current medication and ensure compliance with prescribed regimens.
• Nursing Procedures: Execute nursing procedures such as wound dressing, urinary catheter insertion, naso-gastric tube placement, and tubing care as needed.
• Documentation: Maintain accurate and thorough documentation of all cases seen.
• Record Keeping: Update home visit records within the IT system.
• Confidentiality: Uphold strict confidentiality standards regarding patient information and adhere to PDPA compliance.
• Care Planning: Initiate nursing care plans and implement innovative management strategies.
• Patient Education: Educate caregivers and families on fundamental nursing procedures to enable seamless care continuation at home.
• Collaboration: Coordinate with referring healthcare institutions to manage patient care effectively.
• Support Identification: Identify patients and families in need of financial assistance and make referrals to the Medical Social Worker/Counsellor.
• Psychological Support: Recognize patients and families requiring psychological support or counseling and refer them to the Medical Social Worker/Counsellor.
• Community Engagement: Participate in Metta Fundraising activities when the need arises.

Qualifications:

• Experience: Possess a minimum of 1 year of nursing experience as a registered nurse in various healthcare settings.
• Education: Hold a Diploma in Nursing as a minimum requirement. Postgraduate or Advanced Diploma preferred.
• Registration: Must be registered with the Singapore Nursing Board.
• Certifications: Hold valid BCLS (Basic Cardiac Life Support) and AED (Automated External Defibrillator) certifications.
• COVID-19 Vaccination: Completed COVID-19 vaccination.

If you are a compassionate and skilled nurse ready to make a difference in the lives of those in need, we invite you to join our team. Apply now to become a valued member of our healthcare community.

Our Client is looking for passionate Staff Nurses who wants to join the organization for an exciting renal career as a specialisation. The incumbent is required to maintain standards of patient care, the delivery of safe efficient dialysis therapy as prescribed to patients.

Job Responsibilities:

• You will be a part of our nursing team providing a high standard of nursing care to our renal patients.
• You will oversee and assist in the education of patients, ensure accurate nursing records are maintained and give and receive comprehensive nursing reports.
• You will work closely with clinical nurse managers in all administrative aspects of centre management.
• You will be assigned to one of the dialysis centres, conveniently located island-wide.

Job Requirements:

• Registration with Singapore Nursing Board is a MUST
• Senior Staff Nurse position must hold Advanced Diploma in any Nursing Field
• Training will be provided for those without renal experiences
• Our centres operate on 2 shifts from Monday to Saturday
• Morning: 7.00am to 3.30pm ; Afternoon: 3.00pm to 11.30pm

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below and attached a copy of your most recent updated resume. We apologise that we will only respond to shortlisted candidates. Thank you for applying

About Us: People360 is Singapore's leading healthcare recruitment agency that supports healthcare professionals in improving their lives through Singapore and global career opportunities.

Position Overview: Our client is a well-established private hospital seeking experienced and compassionate Senior/Staff Nurses to become part of our team in various departments, including ICU, A&E, Med-Surg, and Inpatient Suites. They are offering Bonuses and Benefits for qualified candidates!

Key Responsibilities:

The role of a Specialty nurse may vary depending on their area of expertise, but some common responsibilities may include:

• Assessing patient conditions: Specialty nurses are responsible for assessing the health and medical needs of their patients. This includes monitoring vital signs, performing physical assessments, and reviewing medical histories.
• Developing care plans: Based on the assessment, specialty nurses develop individualized care plans for their patients. This involves setting goals, establishing interventions, and evaluating outcomes.
• Administering medications and treatments: Specialty nurses administer medications and treatments, such as intravenous therapy or wound care, as prescribed by physicians or nurse practitioners.
• Collaborating with healthcare teams: Specialty nurses work with other healthcare professionals, such as physicians, therapists, and social workers, to provide comprehensive care to their patients.

Qualifications:

• Valid and current SNB license.
• Minimum of 1 years of nursing experience preferred.
• Strong interpersonal and communication skills.
• Ability to work effectively in a fast-paced and dynamic healthcare environment.
• Attention to detail and excellent problem-solving abilities.
• Commitment to providing patient-centered care.

Shifts:

• This position requires working in 3 rotating shifts, including days, evenings, and nights. Flexibility in scheduling is essential.

Benefits:

• Competitive salary and benefits package.
• 5 day work week.
• Join on bonus for applicable departments.

In your new role you will:

• Creation, modification and prioritization of sales and marketing plans, taking into account existing orders for the next 6 months and in consultation with the Business Demand Planner
• Implementation of allocation decisions in the case of production bottlenecks on the various production lines. This includes coordinating with Customer Logistics (CLM), the Capacity Alignment Planner and Product Marketing.
• Involvement in solving the logistics aspects within task forces for product and production problems
• Participation in projects related to supply chain processes & tools, and change management.
• Monitoring of delivery commitments of the global production locations (front and backend) for the respectively assigned product range. This is performed independently and autonomously taking into account aspects such as available capacities, customer demand and inventory targets.

You are best equipped for this task if you have:

• 1- 3 years professional working experience in supply chain management.
• Bachelor degree in Business Administration, Supply Chain, Electrical /Electronic Engineering, Computing and relevant fields.
• Business focused with strong planning, coordination, analytical skills.
• Excellent communication skills, very well organized and able to think outside of the box.
• Knowledge in Tableau would be an added advantage.