• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical, D-wall and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

The C&S Designer plays a pivotal role in creating and managing 3D models of projects which is crucial to the successful delivery of building projects.

Key Roles and Responsibilities:

• Participate in design and model coordination meetings (for C&S) and review sessions when required
• Enforce BIM strategies, processes and standards, model content and quality control for the discipline/assigned scope of works
• Implement and manage BIM Execution Plan
• Creation of 3D model content and modelling using specified tools and/or prepare 2D drawings in Revit/AutoCAD as relevant or required
• Generate clash detection report and other relevant reports from 3D models
• To develop documentation for submission to Authorities including BIM e-submission
• Archival of 3D models, prepare user handover and related documentation
• Drawing production from 3D models and administer 3D models/drawings distribution to relevant users in compliance with stipulated procedures
• Coordinate and liaise with project/construction team on submissions, updates or changes, and checking for clashes with other disciplines (Architectural, Mechanical, Electrical etc)
• Any other duties assigned from time to time

Qualification, Skills and Experience:

• Diploma/ Higher Nitec from any discipline, preferably with training / background in consultancy design and / or construction works.
• Some knowledge in the use of BIM tools for design / construction documentation.
• Able to use BIM tools to perform drawing and design work.
• Possesses good interpersonal skills for BIM coordination and collaborative processes.
• Interest in working using software and technologies and BIM model creation.
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses and functions.

Accountability – Hold team and self accountable to deliver on our commitments.

Apply: https://hrsembcorp.darwinbox.com/ms/candidate/careers/a6661868fb52d2

The candidate must be civil engineering graduate and have knowledge in soil improvement works. Such as DSM, JGP and ground anchor scope. Must be able to work long hours and able to communicate and work closely with different type of foreign nationality. The candidate should have experience and knowledge related to soil information and grouting materials.

Job Responsibilities :

• Sourcing of material or components
• Preparation of material data sheet for submission
• New product development, finding the source and request quotation; prepare the costing sheet.
• Create BOM for in house products.
• Convert, Modify & Create drawings for in house products, exp : PDF, 2D & 3D
• Involve engineering evaluation and study for related products.
• Leading engineering changes and the product continuous improvement for in house products.
• Prepare, review & create DFM for in house products.
• Arrange, plan, prepare coordinate Sample build activities for in house products.
• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• To work with factory to perform qualitative and quantitative analyses according to customer requirements.
• Coordinate, arrange and inspect for all required sample submission.
• Review, distribute, coordinate & control project related documents, exp: Drawing, DFM & Work instruction etc.
• Document all necessary data, acceptance and implementation procedures.
• Ensures proper records and documented for all activities required for the project.
• Control & monitor any product ECN, running change & improvement implementation.
• Oversees any trials and/or validations that pertain to the specific project.
• Provides technical support in solving product quality problems.
• Provide ongoing reports to department manager regarding project progress and project status.
• Coordinate with all internal department for all project requirements before start of production.
• Ensure product quality & capacity achieve according to requirements & plan.
• Other ad-hoc duties assigned by superior; management.

Job Requirements:

• Minimum qualification - mechanical related diploma graduated
• Minimum 1-year experience in project engineering management.
• Mechanical product or Molding related process experience is an added advantage
• Taking initiative and/or leadership on projects and good project management skills.

As a Gas Chromatography lab application engineer, you would be responsible for designing, developing, and optimizing gas chromatography systems. Your work would involve ensuring the proper functioning of gas chromatography instruments, troubleshooting issues, and providing technical support.

Responsibilities:

• To provide active support to gas chromatography tuning, preparation of GC operation data and report.
• Gas chromatography tuning involves columns installation, operation data collection, and handling of gas and liquid cylinders.
• Ability to troubleshoot gas chromatography issues.
• Support the manager to ensure the quality of the GC produced and to ensure the cleanliness and safety of the lab.
• Support the department on the daily operation activities.

Requirements:

• Minimum Diploma and above in Chemical engineering/Chemistry/ Chemical Process, or any related module is preferred.
• Minimum 2 years of working experience as a Gas Chromatography Lab Application Engineer, who is familiar with gas chromatography principles, operation, calibration, and data analysis is essential
• Proficiency in Microsoft excel and word.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

About Us

Rolo Robotics is a robotics and automation company based in Singapore, reimagining the future of kitchens. Our mission is to tackle the industry's unique challenges by merging cutting-edge technology with culinary innovation.

Our brilliant team consists of experts in robotics, engineering, software development, and culinary arts, all working collaboratively to create innovative solutions. Guided by a board of advisors who are leaders in technology, manufacturing and the food industry, we strive to push the boundaries of what is possible.

At Rolo Robotics, we believe in deploying our solutions at scale, making a significant impact on the way food is prepared and served.

Role

As a Senior Mechatronics Engineer - Control Systems, you will be responsible for developing and implementing control systems for our robotic solutions. You will work on the integration of mechanical, electrical, and software components to ensure optimal performance.

Job Description

• Design and implement control systems for robotic applications.
• Design hybrid architectures with PLC control, Embedded Systems and IPCs.
• Collaborate with mechanical and software engineers to ensure seamless integration.
• Conduct testing and validation of control systems and related sub components.
• Optimise control algorithms for performance and reliability of robotic systems
• Lead and mentor junior engineers in control systems design.
• Liaise with Electrical Team to design optimal wire harness and safety architecture
• Liaise with System Integrators to execute certain sub systems under tight timelines.
• Participate in design reviews and provide feedback to peer engineers
• Provide training to the Deployment team on troubleshooting and servicing related workflows.

Requirements

• Bachelor's or Master's degree in Mechatronics, Electrical Engineering, or related field.
• 2+ years of experience in control systems design, preferably in robotics.
• 2+ years of experience in design and development of mechanical systems that are dependent on actuators and sensors.
• Prior experience in vendor management and component selection.
• Proficiency in control system design tools (e.g., MATLAB, Simulink).
• Strong understanding of sensors, actuators, and mechatronic systems.
• Experience with embedded systems and real-time control.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities

About Us

Rolo Robotics is a robotics and automation company based in Singapore, reimagining the future of kitchens. Our mission is to tackle the industry's unique challenges by merging cutting-edge technology with culinary innovation.

Our brilliant team consists of experts in robotics, engineering, software development, and culinary arts, all working collaboratively to create innovative solutions. Guided by a board of advisors who are leaders in technology, manufacturing and the food industry, we strive to push the boundaries of what is possible.

At Rolo Robotics, we believe in deploying our solutions at scale, making a significant impact on the way food is prepared and served.

Role

As a Senior Embedded Systems Engineer, you will design, develop, and optimise embedded systems for our robotic solutions. You will work closely with cross-functional teams to ensure the reliability and performance of our embedded systems.

Job Description

• Design and develop embedded systems (hardware and firmware) for robotic applications.
• Write and optimise firmware for microcontrollers and embedded processors.
• Collaborate with hardware and software teams to integrate embedded systems.
• Create automated testing systems for validating and debugging PCBs.
• Optimise the hardware for performance, power consumption, and ruggedness.
• Participate in product compliance exercises with external certification agencies.
• Lead and mentor junior engineers in embedded systems design.
• Participate in design reviews and provide technical guidance to fellow engineers.
• Participate in design reviews and provide feedback to peer engineers
• Provide training to the Deployment team on troubleshooting and servicing related workflows.

Requirements

• Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field.
• 5+ years of experience in embedded systems design, preferably in robotics.
• Proficiency in programming languages (e.g., C, C++) and development tools.
• Proficiency in PCB Design, Development and Fabrication (Autodesk, Altium etc.)
• Strong prototyping skills in PCB design and inhouse fabrication
• Minimum 3 years experience in managing PCB manufacturing with external vendors
• Proficiency in managing PCB BOM and component selection based on life cycle requirements.
• Experience in conducting PCB tests for EMC compliance (under CE, UL, PSB etc.)
• Strong understanding of microcontrollers, sensors, and communication protocols.
• Experience with real-time operating systems (RTOS) and embedded Linux.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

Job Description :

• Coordinate all related construction matters with the Subcontractor/ Consultant/ Client.
• Resolve technical problems at site by developing solutions to problems with the application of engineering concepts, practices, and techniques.
• Plan and schedule work progress for construction operations & develop micro schedule.
• Coordinate with consultants on the day-to-day inspection on-site and resolve discrepancies and other detailing problems in the construction works with the consultants and superiors.
• Assist project manager to prepare daily/weekly and monthly site reports and submit to the planning department.
• Prepare all method statements, drawings, and risk assessments for the client to review.
• Review and verify all Civil and Structural related engineering works are complying with the requirement.

Job Requirements:

• Degree in Civil/ Structural Engineering.
• At least 2 years working experience in civil engineering/infrastructure projects.
• Working location at Jurong East
• 5.5 days work week

About Us

Rolo Robotics is a robotics and automation company based in Singapore, reimagining the future of kitchens. Our mission is to tackle the industry's unique challenges by merging cutting-edge technology with culinary innovation.

Our brilliant team consists of experts in robotics, engineering, software development, and culinary arts, all working collaboratively to create innovative solutions. Guided by a board of advisors who are leaders in technology, manufacturing and the food industry, we strive to push the boundaries of what is possible.

At Rolo Robotics, we believe in deploying our solutions at scale, making a significant impact on the way food is prepared and served.

Role

As a Senior Mechanical Engineer at Rolo Robotics, you will play a crucial role in designing and developing mechanical components and systems for our robotic solutions. You will work closely with cross-functional teams to ensure our products meet the highest standards of performance and reliability.

Job Description

• Design and develop mechanical components and sub-systems for robotic food preparation applications.
• Conduct simulations and analyses to validate designs.
• Collaborate with electrical and software engineers for system integration
• Lead and mentor junior engineers in mechanical design and development.
• Liaise with external vendors and suppliers to adopt state of the art technologies
• Attend training and workshops to stay updated of the latest automation systems.
• Oversee the fabrication and testing of prototypes.
• Optimise designs for manufacturability and cost-effectiveness.
• Participate in design reviews and provide feedback to peer engineers
• Provide training to Deployment team and facilitate feedback sessions

Requirements

• Bachelor's or Master's degree in Mechanical Engineering or related field.
• 3-5 years of experience in mechanical design, preferably in robotics or automation.
• Prior experience in one fully product life cycle (ideation, development, manufacturing and deployment) is desirable.
• Proficient with rapid prototyping using 3D printers, Laser cutters, CNC machines etc.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD, Onshape).
• Strong understanding of materials, manufacturing processes, and mechanical systems.
• Experience with FEA and other simulation tools.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

Responsibilities

• Develop the next generation FPGA & SOC based artificial intelligent software Platform.
• Work closely with suppliers to support the FPGA/Linux software development in machine learning, computer vision, video coding and transmission and etc.
• Work together with advance solution team to deliver AI platform into different customer applications

Requirements

• Bachelor’s or Master’s Degree in Electrical Computer Engineering or Equivalent
• Minimum 3 years of hands-on experience with FPGA design, embedded Linux software development, or related
• Successful completed FPGA or embedded Linux designs from concept to production
• Familiar with common processor interfaces (PCI-Express, DDR3/4, I2C, SPI, RS232, MDIO, XAUI, MIPI, etc.)
• Experienced with Xilinx Vivado IDE including synthesis, simulation, place and route, timing closure
• Familiar with Vitis software platform is a plus
• Experienced with embedded Linux based BSP customization, software framework and application development
• Exposure to integration and debugging tools, such as oscilloscope, logic analyzers
• Able to work independently

Responsibilities

• Responsible for creating business opportunities with potential customers in ASEAN and ANZ region.
• Provides technical support to customers throughout the R&D cycle till completion.
• Drive design win and demand creation revenue for the company.

Requirements

• Degree/Diploma in Electronics or Electrical Engineering or equivalent
• Minimum 3 years of FAE working experience in a semiconductor distributor or manufacturer environment, or
• Working experience in a R&D position with strong knowledge in hardware design, analog and/or power application.
• RF & Microwave experience in Comms, Radar, Instrumentation, Defense etc. is a plus.
• Experience in PCB layout designs, schematic capture, routing rules, testing and debugging.
• Able to work independently and also contribute as a team player
• Strong communication and interpersonal skills
• Able to travel on short notice

Responsibilities

• Involve in the full cycle of development for reference board, modules and product solutions.
• Design, simulate, develop and test electronic modules & systems containing various interfaces, including microcontrollers, SOC, wireless, memory system, networking and power control sub system and etc.
• Generate documentations regarding concepts, specifications, schematics, test reports, verification report etc.
• Work as a team and coordinate closely with Software team, Marketing team and customers to deliver projects on time.

Requirements

• Degree in Engineering with minimum 3 years of experience in electronics hardware design, or minimum 10 years’ experience for senior role.
• Good knowledge in digital & analogue circuits, ultra-low power, audio system, power management, wireless & RF design, high speed computing technology etc.
• Experience on detailed electronics design, implementation & testing or complex PCBA designs, power integrity, signal integrity, design for test / manufacture & quality, wireless integration, etc.
• Strong hands on experience on hardware test, issue isolation, and debug
• Knowledge on test and support for product certifications
• Must be a good team player to work closely with software team.
• Initiative and willing to work in an energetic team

Responsibilities

• Responsible for Software Development.
• Involve in Feasibility Study, Design, Implementation, Testing, Maintenance and Customer Support.
• Study customer’s requirements, implement new specification, and develop new ideas for products improvement.
• Prepare technical design documents and software management by using source control tools.
• Work as a team and coordinate closely with Hardware, Marketing team and customers to deliver projects on time.

Requirements

• Degree in Engineering / Computer Engineering with min 3 years of experience in software development.
• Proficient in Python, Visual C++ program languages, and must have hands-on experiences
• Familiar with software interface to USB HID, Serial Port etc.
• Familiar with multiple structure software and state machine theory
• Knowledge on network protocol like TCP/IP, socket will be an advantage.
• Able to understand schematic and basic hardware knowledge
• An initiative worker and willing to work under stress
• Must be a good team player

The Testing and Certification Engineer for the Asia & Pacific Open Testing and Integration Centre (OTIC) in Singapore will be responsible for conducting testing with customers and testing tool providers, analyzing and evaluating testing results to certify O-RAN components.

Main Responsibilities:

• To work with the testbed System Architect, Technical Manager, and the other team members to configure and test a device-under-test (DUT) / system-under-test (SUT) of different customers.
• To understand the test specification and certification specified by standards bodies such as 3GPP, O-RAN, ETSI.
• To work with customers and testing tool vendors to configure and integrate DUT / SUT and the testing tools to achieve the testing / integration / certification objectives.
• To design, develop and deploy test cases to evaluate different O-RAN-based DUT / SUT.
• To participate in international organization discussion meetings (ORAN Alliance, TIP, MGMN), update the latest specifications defined by these standards bodies, and contribute to defining upcoming specifications/standards.
• To design, develop, and deploy test cases for manual and automation test scripts to evaluate different O-RAN-based DUT / SUT.
• To design detailed criteria and implement the procedures for each certification defined in standards.
• To analyze test results and assist customers in troubleshooting interoperability, security issues.
• To research 5G-related specifications and technologies for 3GPP and O-RAN.

Job Requirements:

• Bachelor or Master’s degree in computer science, computer engineering, communication engineering, or related fields.
• Hands-on experiences in Linux systems, virtualization/containers, edge/cloud systems deployment and management (e.g., Kubernetes).
• Good programming skills, e.g.: Python, shell scripting, C / C++.
• Hands-on experience and working knowledge of developing and deploying automation test tools (e.g., Jenkin). Experience with CI/CD is a plus.
• Hands-on experience and working knowledge in deploying and operating wireless networks (e.g., LTE, 5G networks).
• Familiar with 3GPP, ETSI standards, and O-RAN specifications is a plus.

Enabling Competencies:

• Analytical and problem-solving skills.
• Good interpersonal, communication and writing skills.
• Able to work independently and as a good team player.
• Adaptable and able to multi-task in a fast-paced environment.
• Ability to work under pressure.

Job Description & Requirements

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• To handle Tunnel Testing and Inspection activities.
• Tracking the movement of Tunnel Segmenrs by using the VMT Tracking System.
• Monitor the ring building activities prior to LTA submission and updating the ring building activities.
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree in relevant discipline.
• Minimum 5 years of experience in procurement preferably construction/ civil engineering industry.
• Must be familiar with safety procedure within the site.
• Have experiences in working in large scale projects.
• Candidate with LTA and mrt tunnelling experience advantage.
• To be based in project site office.
• 6 Working Days per week.
• Working Location: Tampines.

Job Description & Requirements

Possess Diploma/ Degree in Civil/ Construction Technology

Supervise building construction works

Familiar with steel structure fabrication and erection

Familiar with construction site WSH rules and regulation

Able to communicate simple english

Possess Building Construction Supervisor Safety (BCSS) certificate is an advantage

Class 3 driving license will be an added advantage

Work at height supervisor (WAH) certificate preferred

Scissors lift/ boom lift certificate an advantage

Possess Diploma/ Degree in Civil/ Construction Technology

Supervise building construction works

Familiar with steel structure fabrication and erection

Familiar with construction site WSH rules and regulation

Able to communicate simple english

Possess Building Construction Supervisor Safety (BCSS) certificate is an advantage

Class 3 driving license will be an added advantage

Work at height supervisor (WAH) certificate preferred

Scissors lift/ boom lift certificate an advantage

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.