A key partner in significant product cost reduction activities, in early phase innovation working closely with the design engineers and/or in the manufacturing phase.

Responsibilities

• New product sourcing and management. Responsible of performing research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities,

1. Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
2. Identifies cost drivers to influence design decision making towards target costing.
3. Product/module cost models and quotes are up to date at launch and effectively rolled out.
4. Reviewing and negotiating supplier terms and conditions exceptions to mitigate risk.
5. Support price negotiations with opportunities to drive short- and long-term cost reduction improvement.

• Build strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborate with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partnering Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participate in project meetings/brainstorming sessions to identify solutions available
• Performs other duties as assigned

Experience/Qualifications

• Bachelor Degree in Electrical / Mechanical Engineering with 5 years or more of relevant experience.
• Purchasing experience is a plus
• Working knowledge of geometric tolerances
• Experience creating or modifying manufacturing processes and procedures.
• Experience with overseas suppliers
• Understand Bill of Material (BOM) structure, able to interpret technical drawings / specifications and familiar with Engineering Change Process Experience in Operation Management or capital equipment design is a plus.
• Strong Analytical, planning and interpersonal skills as well as experience in engaging stakeholders
• Positive and able to work in fast-paced environment.
• Mature, independent and results-oriented
• Able to work with different departments / functional groups.
• Some travel is required for the role.
• Proficient in Microsoft Office applications (Excel, Word & PowerPoint)

Company overview:

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity:

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Responsibilities:

• Task to design and develop RF components including LNA, Power Amplifier, and Up/Down Converters (up to Ka band frequency).
• Participate in RF system and subsystem design projects.
• Conduct tests and measurements using RF equipment.
• Utilize RF simulation software (AWR, ADS, HFSS) for design purposes.

Requirements:

• Advantage with knowledge in Electronics Communication Engineering
• Familiar in RF system or subsystem design.
• Able to workRF circuit design and using related simulation software.
• Able to work in a team
• Working Location: Serangoon
• Working Days: Monday - Friday (8.30am - 6.00pm)

Andy Lee R1878689 | One Vogue Pte Ltd 19C9629

Job Description

Do you want to be on the forefront of innovation? NVE Product Engineers work with the latest in emerging tech nodes for storage solutions that positively affect the world we live in! As Non-Volatile Engineering (NVE) System Integration (Solution) Product Engineers at Micron Technology, Inc., we are responsible for the integration of new non-volatile products into various system solutions (SSD, UFS, uSD). We ensure end-product challenges are solved in the right place for maximum value and streamline overall development effort, complexity and risk. We enable parallel NAND and System development through feature optimization and innovative solutions, demonstrating technical expertise in both sides.

We are at the helm for system triage activities through failure analysis on both NAND Component and System-level to identify source of failure, capable to drive issue-based taskforce to establish solutions to unblock critical system development. We will also innovate system triage methodology through the use of Machine Learning for cycle-time and efficiency improvement.

We strive to drive understanding of NAND Features application in systems thereby supporting validation improvements during NAND development. We also review NAND testing methodology towards required System guarantee.

To enable systems with outstanding performances, we identify non-ideal NAND performance behavior in Systems and path-find solution space to resolve system performance impact. We also drive NAND vs System performance sensitivity evaluations and specifications refinement to improve modelling with better clarity.

Requirements

Successful candidates for this position should demonstrate:

• Analytical skills to deep-drive and path-find technical issues.
• Provide leadership in problem analysis and resolution at network level. Work with groups outside of your department to identify and close technical gaps related to new product integration.
• Highly motivated and adaptable to our fast paced, dynamic and rapidly changing work environment. Flexibility to work for extended hours as required
• Ability to work with a variety of cultures and with multi-functional teams
• Keen interest in NAND-system interaction and technical deep-dives; Prior relevant experience will be an added advantage.

Education

• Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering and related disciplines

As a Firmware Engineer at Micron Technology, Inc., you will build groundbreaking high-performance controller firmware for volatile and non-volatile memory systems. You will assist in the evaluation, creation, build, bench testing, debugging, and failure analyzes of firmware for new high-performance memory controllers and Solid State Drives (SSD) that will improve performance, while reducing power, latency and SoC (System on Chip) complexity for the target sectors. You can expect to partner multi-disciplinary Engineers seek multi-functional product development issues. You will triage failures, file bug reports, and help the development teams with isolating issues.

Experience / Skills:

• In depth knowledge and extensive experience with embedded firmware development
• Expertise in the use of scripting languages, programming tools and environments
• Extensive experience programming in Python
• Experience in the storage industry in SSD, HDD, storage systems, or a related technology
• Understanding of storage interfaces including ideally PCIe/NVMe, SATA, or SAS
• Experience with NAND flash and other non-volatile storage
• Ability to work independently with a minimum of day-to-day supervision
• Experience with team leadership and/or supervising junior engineers and technicians
• Ability to work in a multi-functional team and under the pressure of multiple priorities

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Data Analytics and Reliability Test Architect:

• To enable proactive methodology for intrinsic and extrinsic defectivity (DPM) reduction at wafer level using advanced Machine Learning/Deep Learning product-dispo techniques.
• To develop state-of-art and advanced algorithms, encompassing Machine Learning and Deep Learning models to boost and enhance data-mining and pattern recognition for quality and yield improvement.
• To work with Product/Fab/Engineering teams on product issues (yield/intrinsic/cell/qualification/defectivity/RMA/deviations) in problem analysis, data-mining and modeling, to provide optimal disposition solution.
• Support design, implementation and maintenance of REL data pipeline system
• Develop tailored made machine learning solution and collaborate with TPG data science team to translate idea to data science prototypes
• Designing and maintaining ML production system that continuously operate in production
• Work with IT team and vendor to enable cloud platform in Micron environment
• Continuous improve software build by investigating alternatives and technologies in support of systems development efforts

Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies

Requirements:

• Bachelor's Degree in Electronics Communication Engineering
• At least 3 years of experience in any RF system/sub-system design
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc
• Working knowledge of RF test and measurement equipment
• Experience in using simulation software such as AWR, ADS, HFSS etc
• Experience in VSAT system or subsystem design is an added advantage

As a NAND Silicon Design Validation Senior/Principal Product Engineer at Micron Technology, Inc., you will be responsible in developing, validating, characterizing, and qualifying new state-of-the-art NAND Flash memory products. In this role, you will be involved in pre-silicon conceptual design and preparation work, run simulations, create and maintain design and validation documentation, analyze bench and parametric data as well as to debug & resolve yield, quality and reliability failures due to design related issues. You will also refine and develop best known methods and automation for design validation of current and future products.

You will also be responsible to work with NAND R&D, Designers and other various Engineering functional groups to troubleshoot, develop and validate new designs to meet specific product requirements. Product Engineers are the key product-specific point of contact for critical issues and act as the main interface between Research and Development, Manufacturing, Business Units, and Quality Assurance departments.

Responsibilities:

• Responsible for new product startup to deliver product specifications and requirements
• Define and validate product configuration parameters
• Create validation flow for silicon design margin characterization and validation in volume.
• Support design verification and in-depth circuit of new products using CAD tools and Verilog simulations
• Identify design marginalities and recommend design fix for circuit-related problems
• Perform electrical failure analysis to understand the root cause of device marginalities or failures
• Utilize engineering bench and testers to perform device characterization and electrical failure analysis

Qualifications/requirements:

• At least bachelor degree from electrical/electronicsor Computing engineering.

We are seeking a highly skilled, motivated and experienced deployment Engineer to join our dynamic team. The team here bring the solution and designed from the initial presales stage into actual setup for our clients.

Responsibilities:

Position Overview: As the Senior Network/Security Post-Sales Engineer Team Lead, you will be a key leader within our post-sales engineering team, responsible for overseeing the successful implementation and deployment of our network and security solutions. You will lead a team of post-sales engineers, providing technical expertise, guidance, and mentorship to ensure exceptional service delivery and customer satisfaction. Additionally, you will collaborate closely with cross-functional teams including sales, product management, and support to drive continuous improvement and innovation.

Key Responsibilities:

• Lead and mentor a team of post-sales engineers responsible for the implementation and deployment of network and security solutions.
• Provide technical leadership and guidance to the team in resolving complex technical issues and challenges during implementation.
• Collaborate with sales, product management, and support teams to develop and execute comprehensive implementation plans tailored to meet customer requirements.
• Serve as a subject matter expert on our network and security solutions, providing pre-sales support as needed to assist in solution design and proposal development.
• Drive customer success by ensuring projects are delivered on time, within budget, and meet or exceed customer expectations.
• Develop and maintain strong relationships with key stakeholders, including customers, partners, and internal teams, to ensure alignment and customer satisfaction.
• Stay informed about industry trends, emerging technologies, and best practices related to network and security solutions, and leverage this knowledge to drive continuous improvement and innovation within the team.
• Contribute to the development and improvement of processes, tools, and methodologies to streamline implementation and enhance customer experience.
• Collaborate with senior management to develop strategic initiatives and drive business growth.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or related field. Master's degree preferred.
• 8+ years of experience in a technical role within the network and security industry, with a strong understanding of networking protocols, security technologies, and best practices.
• Proven experience leading and managing technical teams, with a focus on driving results, fostering collaboration, and developing talent.
• Excellent communication skills, with the ability to effectively communicate technical concepts to both technical and non-technical audiences.
• Strong problem-solving skills and the ability to thrive in a fast-paced, dynamic environment.
• Relevant certifications such as CCIE, CISSP, or equivalent are highly desirable.
• Experience with network and security solutions from leading vendors such as Cisco, Palo Alto Networks, Aruba/Juniper, etc.
• Experience with Cloud Networks, Containers will be advantageous
• Experience with project management should be part and parcel for project coordination and management.

This job description outlines the primary duties and qualifications for the role of Network/Security Engineer within our organization. The responsibilities and requirements may evolve over time to align with the needs of the business and advancements in technology and project needs.

Responsibilities:

• Support for CXL Product Failure Analysis from NPI to HVM stage.
• Responsible in fulfilling product yield milestones during both NPI and HVM stages through optimization of test methodology & test flow.
• Develop tool/script to support yield evaluation, data analysis and test correlation, including Product Database maintenance & management.
• Perform CXL characterization to optimize product performance.

Requirements:

• Bachelor/Master’s degree holder in Electrical/Electronic/Computer Engineering/Computer Science.
• Good interpersonal and communication skills.
• Proven good problem-solving skills.
• Good understanding of computing system interface such as PCIe.
• Proficiency in programming languages such as C/C++/ Python/SQL/MySQL.
• Relevant experience in setup & managing of Database data analytics and reporting will be an advantage.

Description of the Roles:

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for medical products. You will play a critical role in medical robotic projects developing and integrating diagnostic, interventional, and machine learning technologies.

Specifically, you will provide electro-mechanical engineering expertise for product development and integration. You will be working on designing mechanisms and structures, and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop electro-mechanical systems in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical/Mechatronics/Biomedical engineering.

· 3-5 years’ experience in the design & development of electro-mechanical or robotic system.

· Experience at least one cycle of product development.

· Academically inclined with at least 2nd Upper Honours.

· Able to communicate and write documents in Chinese (preferred).

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Strong interest in mechanism design, kinematic and dynamic of mechanics, especially in precision mechanism.

· Good knowledge of various materials (metal and plastic) and manufacturing processes for product design.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

· Able to work overtime when necessary.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in robotic system, flexible robotic instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed electro-mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to electro-mechanical system.

· Support feasibility study on conceptual design for new products.

· Resolve issues and improve product reliability.

· Ensure the product design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and production activities locally or with overseas partners.

Ensure proper documentation (Design History File) for mechanical design.

Job Description

• Perform engineering hardware prototype testing and troubleshooting.
• Perform testing on GUI Application software and embedded firmware.
• Perform testing and troubleshooting of different type of assembled Burn-in driver boards and other related circuit boards.
• To perform electrical wirings, hardware integration and testing of Semiconductor Burn-in systems and customized Test equipment.
• Resolving day-to-day System manufacturing’s hardware and software technical problems.
• Assist in all kinds of Engineering Projects and Manufacturing work orders, including preparing Mechanical drawing, Electrical drawing, BOM preparation and Engineering documentation.
• Perform local and oversea burn-in system / test equipment field servicing, installation, preventive maintenance and customer’s training.

Job Requirements

• Minimum Degree in Electrical Electronics Engineering.
• Minimum 2 years of experience with software design.
• Self-motivated, able to work with minimum supervision.

Job duties & responsibilities:

• Provide technical guidance in developing new PCB designs and updating existing designs.
• Develop PCB layouts, perform component placements and determine wire routings.
• Verify existing designs and recommend improvements.
• Recommend new design concepts and validate the concept feasibility using circuit simulations.
• Prepare design documentations, requirements specifications and PCB models.
• Perform PCB design testing and analyze test results.
• Monitor and report project status to Manager on regular basis.
• Attend project meetings to discuss about project progress and issues.
• Ensure that project deliverables meet customer expectations.
• Propose process improvements to ensure PCB functionality, quality and reliability.

Job requirements:

• Diploma / degree in Electrical & Electronics Engineering /Computer Engineering.
• Preferably 1 year of experience in PCB schematic design & PCB artwork design.
• Entry-level candidates with keen interest in PCB design are welcome to apply. Training will be provided.
• Knowledge in Althium, Protel or any other electronics design software would be an added advantage.
• Self-motivated.

Purpose:
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements

Responsibilities:

• Understands the specifications and requirements in the area of mechanical packaged equipment and system (such as Glycol Dehydration Package, Chemical Injection package, H2S removal package,Produced water treatment Package, WHRU, Pressure vessels, Pumps,etc., ) of the assigned package.
• Responsible for Mechanical Design of packaged equipment in compliance with applicable International codes ASME, API etc.,
• Independently develops technical specifications/standards and Requisitions for packaged equipment and system such as Glycol Dehydration Package, Chemical Injection package, H2S removal package, Produced water treatment Package, WHRU, etc.
• Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less complex packages and middle risk equipment are assigned.
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.
  
  Requirements:
• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, NACE, etc.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for a Commissioning Engineer - EPMS to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Undertake technical reviews of customer drawings and specifications
• Monitor and control commissioning deliverable progress to ensure the on-time delivery of the projects. Use the tracking board tool and take pro-active decisions and actions to prevent any slippages. Ensure full & effective reporting of project progress & status to the management
• Manage Project Risks & Opportunities associated with the commissioning deliverables by assessing, identifying, mitigating and controlling any potential situations that could impact (negatively or positively) the performance of the project
• Master Variation Order & Claim process for both Customer and vendors. Work with the Project Manager to obtain Variation Orders for any deviation from the contractual scope
• Mitigate any source of conflict with customer or internal stakeholders throughout the project installation phase
• Drive customer relationship and proactively communicate (executive summary, emails, calls, meetings). Establish key relationships with all relevant project stakeholders

What's in it for you?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

What qualifications will make you successful for this role?

• Bachelor’s Degree in Mechanical, Electrical, or an equivalent engineering discipline
• Minimum of five years' work experience in EPMS, BMS, HVAC, or Industrial Controls/ Automation
• Previous work experience as a automation/ controls commissioning engineer and managing a team of technicians is preferable
• Knowledge of Modicon PLCs and EcoStruxure Control Expert (formerly Unity Pro)
• Knowledge of Citect SCADA
• Advantage to have experience in commissioning within a Data Centre environment

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Purpose
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Responsibilities

• Understands the specifications and requirements in the area of marine mechanical packages and equipment (such as Essential and Emergency Generator, Non API pumps, Fire water pumps, Garco pumps, Inert Gas Generator package, low and High Foam Expansion Packages, etc., ) of the assigned package.
• Responsible for Mechanical Marine vendor packaged equipment in compliance with applicable International codes (such as IMO, SOLAS) Classification Rules, ASME, etc.,
• Independently develops technical specifications/standards and Requisitions for marine packaged equipment and system such as Essential and Emergency Generator, Non API pumps, Inert Gas Generator package, low and High Foam Expansion Packages, etc.
• Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less complex packages and middle risk equipment are assigned.
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know- how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements

• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable
• Experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, NFPA, International codes (such as IMO, SOLAS) Classification Rules and regulations, etc.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for a Commissioning Engineer - BMS to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Undertake technical reviews of customer drawings and specifications
• Monitor and control commissioning deliverable progress to ensure the on-time delivery of the projects. Use the tracking board tool and take pro-active decisions and actions to prevent any slippages. Ensure full & effective reporting of project progress & status to the management
• Manage Project Risks & Opportunities associated with the commissioning deliverables by assessing, identifying, mitigating and controlling any potential situations that could impact (negatively or positively) the performance of the project
• Master Variation Order & Claim process for both Customer and vendors. Work with the Project Manager to obtain Variation Orders for any deviation from the contractual scope
• Mitigate any source of conflict with customers or internal stakeholders throughout the project installation phase
• Drive customer relationship and proactively communicate (executive summary, emails, calls, meetings). Establish key relationships with all relevant project stakeholders

What's in it for you?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

What qualifications will make you successful for this role?

• Bachelor’s Degree in Mechanical, Electrical, or an equivalent engineering discipline
• Minimum of five years' work experience in EPMS, BMS, HVAC, or Industrial Controls/ Automation
• Previous work experience as an automation/ controls commissioning engineer and managing a team of technicians is preferable
• Knowledge of Modicon PLCs and EcoStruxure Control Expert (formerly Unity Pro)
• Knowledge of Citect SCADA
• Advantage to have experience in commissioning within a Data Centre environment

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Purpose
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Responsibilities

• Understands the specifications and requirements in the area of mechanical static equipment and components (such as pressure vessels, heat exchangers (shell and tube, plate and frame types), separators, process and utility pressure vessels, etc.) of the assigned package.
• Responsible for Mechanical Design of Static Equipment in compliance with International codes ASME Sec VIII Div-1, Div-2, EN-13445 and equivalent.
• Independently develops technical specifications/standards and Requisitions for rotating equipment such as Centrifugal Pumps, Positive Displacement pumps, Air and utility compressor, steam/gas turbines etc
• Independently develops technical specifications /standards and Requisitions for static equipment such as Pressure Vessels, Separators, Process Vessels, Heat Exchangers, Air Coolers, etc
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know­ how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements

• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable
• Experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, NACE, WRC, etc.

About Us

SPH Media is evolving, and we welcome talented individuals to join us in our transformation journey. Our mission is to be the trusted source of news and lifestyle content in Singapore and Asia. As an employer, we are committed to rewarding our people fairly and developing them in their careers. Grow your career in a vibrant and collaborative environment built around a culture of respect and inclusivity. Join us! To work with passionate people who impact lives through the stories they tell.

About the Role

We are looking for a Senior Staff/Senior/Lead Engineer proficient in ReactJS and TypeScript. The successful candidate will work in a dedicated team seated within The Straits Times to develop a modern, greenfield SSR + SSG React website and rendering stack to serve content to readers worldwide across multiple publications.

Responsibilities:

• Lead the end-to-end development of web applications using ReactJS, ensuring adherence to best practices and coding standards.
• Collaborate with a dedicated team to develop a modern SSR + SSG React website and rendering stack.
• Write clean, maintainable code adhering to best practices.
• Develop and implement unit and end-to-end tests for quality assurance.
• Participate in code reviews and provide constructive feedback to peers.
• Contribute to the improvement of development processes and tools.
• Optimize application performance and ensure scalability through effective unit testing strategies.
• Participate in code reviews and provide constructive feedback on styling, unit test coverage, and implementation.
• Mentor junior developers on Tailwind CSS best practices, unit testing, and ReactJS development.
• Collaborate with product managers, designers, and other stakeholders to define project requirements and acceptance criteria.

Who We Are Looking For

Qualification

• Bachelor's degree in Computer Science or equivalent

Skills & Competencies

• Min 5+ years of experience in developing web applications using ReactJS, JavaScript, preferably also TypeScript.
• Strong proficiency in Tailwind CSS, HTML, and related web technologies.
• Extensive experience with Redux or similar state management libraries.
• Deep understanding of RESTful APIs and asynchronous programming.
• Extensive experience writing unit and end-to-end tests with proficiency in unit testing frameworks such as Playwright and Vitest.
• Excellent problem-solving and communication skills.
• Ability to lead projects and work effectively in a team environment.
• Experience in developing highly performant websites for serving content at scale.
• Extensive SSR or SSG experience, possibly with React.
• Experience with AWS services, including Lambda.
• Experience in maintaining CI/CD pipelines.
• Experience in using Docker or Terraform.
• Experience with server-side rendering (SSR) using frameworks like Next.js
• Familiarity with version control systems (e.g., Git)
• Understanding of agile development methodologies

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The Senior Engineer will be providing technical services to support the design, implementation, and ongoing support of IP-based media solutions within the broadcast infrastructure. Ensuring successful integration, maintenance & support of IP technologies for the production, management, and distribution of media content in the broadcast environment.

The role involves assisting of projects execution that involve multiple stakeholders and vendors. The individual contributes to the upkeep of IP-based media broadcast systems and infrastructure, doing preventive maintenance for broadcast-related equipment and infrastructure. The individual should be able to perform the plans, demonstrating the ability to efficiently manage multiple tasks and engage with various stakeholders. Collaborating with diverse teams to implement and maintain the broadcast media production workflow.

Responsibilities

• Assist with the implementation of IP-based media systems, ensuring scalability, flexibility, and adherence to industry standards.
• Collaborate with cross-functional teams to integrate IP technologies into existing and/or new broadcast systems & infrastructure.
• Perform cyber security management within the broadcast network in accordance with organisation policies.
• Assist with integrating IP-based solutions for media production, including video-over-IP, audio-over-IP and associated control protocols.
• Testing of system to validate the performance, reliability, and quality of broadcast systems.
• Adapting and migrating from traditional broadcast systems to IP-based solution. Minimising downtime and disruptions.
• Troubleshoot faults and implement solutions to minimise downtime.
• Perform repairs on broadcast system & equipment.

• Diploma/Degree in Electronic & Electrical Engineering or Information Engineering & Media or Computer Engineering from a recognised tertiary institution.
• 3 to 5 years of relevant experience in the media industries.
• Hands-on Engineer with interest in broadcast engineering
• Knowledge in IT computer networking and cybersecurity
• Analytical and troubleshooting skill to support broadcast IT systems
• Proficient in written and communication skills
• A team player who is able to work independently and is prepared to perform shift duties, late night works and standby support for key events

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you will bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• At least 8~10 years of direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc.
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

• Applying software engineering principles to analyze and problem-solve, and design a solution
• Developing and executing project plans
• Creating technical specifications
• Writing code in various languages, like Java, Ruby on Rails or .NET programming languages
• Designing and developing test cases
• Executing full lifecycle software development
• Programming well-designed, testable, efficient code
• Producing specifications and determine operational feasibility

Responsibilities

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

Requirements

• Recognised Degree in Electrical Engineering
• Minimum 7 years of relevant experience in industry

The Role:

Based in the WSP Singapore office, the Consultant will be delivering ICT & Telecommunications Engineering and Consultancy Services to Clients across multiple sectors such as data center, healthcare facilities, aviation and property commercial buildings. You will be part of a rapidly growing Technology Consulting team, developing and managing technical delivery through new opportunities and existing clients.

The ideal candidate should have an interest in applying their expertise, project management and thought leadership to deliver digital design. We are looking for highly effective people who can work collaboratively with direct/ indirect (multidisciplinary) colleagues and external stakeholders to deliver great outcomes for our clients.

Key Responsibilities:

1. Responsible for delivery; taking ownership of projects as well as tasks.
2. ICT & Telecommunications detailed design documentation such as:Client Return Briefs
   Reports
   Technical Advice
   Specifications
   Schematics
   Drawings
   
   Detailed sections and installation drawingsSite inspections and construction management duties including RFI and Submittal review
   Attend meetings independently
   Coordination with relevant engineering disciplines to ensure the ICT network can support their services (Smart Building, Electrical and Mechanical, AV, Security)
   Coordination with Architect to ensure adequate spatial provisions have been provided

Qualifications:

• Relevant tertiary qualifications (BSci, BEng or equivalent)
• Minimum of 2-year consulting experience and 4-8 years’ industry experience on ICT projects
• Well versed with providing ICT & technology advisory services and technical designs
• Sound understanding of International and Singapore ICT Standards
• Proven ability of writing well-structured and clear design reports
• Proficient in commercial grade building ICT system design and designing IT/OT networks
• Track record of leading medium scale projects and contributing to larger projects
• Familiarity with design and construction platforms and tools (Revit, CAD, Bluebeam, Autodesk360, etc.)
• Comfortable handling competing priorities, prioritising work, and meeting deadlines
• Strong interpersonal and communication (written/verbal) skills.

Preferred Qualifications:

• RCDD or other BICSI credential
• CCNA, CCNP or other similar networking credential
• CWNA, CWDP or similar wireless network credential
• Experience in a consulting engineering setting
• Experience in Smart Building Technology design
• Experience involving the design of Integrated Converged Networks
• Data centre project experience

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage