Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

RESPONSIBILITIES

• Organise, coordinate, control and carry out the work assigned related to project(s).
• Review incoming client document from technical consideration and make require summaries/ key points for agreeing on strategy for execution with Project Director and decide requirement of resources including external resources.
• Monitor planning and progress of work.
• Monitor the issue of technical documents by establishing and updating the Document List.
• Provide all information to the Project Director related to organisation, planning, progress and reporting on activities assigned.
• Coordinate the work being done by outside agencies
• Perform specified technical tasks with reference to identified requirements.
• Be familiar with applicable codes, standards, specifications and regulations.
• Make project execution plans and other project related documents including project schedules.
• Review and control the work performed by the discipline team.
• Establish transmittals for issue of documents including distribution list to outside parties and internally within the organisation.
• Review new requirements and inform on their consequences.
• Identify design changes, report them and update the documentation.
• Handle internal and external interfaces.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Bachelor's degree in Engineering major in Mechanical, specializing in project material engineering, petrochemical and plant design and construction.
• At least 15 years of working experiences in engineering company.
• At least 4 years working experiences in FPSO and Offshore project management, engineering and construction execution and management
• Working experiences as engineer or project control in design office and construction yard such as module fabrication shop or shipyard and integration of topside modules to hull.
• Strong engineering knowledge of Topside engineering including module, piping and equipment layout design, material design, and procurement in FPSO Project, working knowledge with NORSOK, DNV, ASME, ASTM, MSS, working knowledge or experience in support design, and insulation design.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration and interface coordination between Joint Venture, Consortium set-up and inter-discipline engineering and inter-contractor activities with proactive mind.

Title: Azure Cloud Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

This role will focus on designing, building, and maintaining scalable cloud-based data solutions, leveraging Azure services to drive business insights and optimize data workflows.

Key Responsibilities

• Design, deploy, and manage cloud-based data solutions on the Azure platform.
• Build and optimize data pipelines, data lakes, and ETL processes using Azure Data Factory, Databricks, and Synapse Analytics.
• Collaborate with cross-functional teams to ensure seamless integration of data across multiple sources.
• Develop secure and scalable cloud solutions, adhering to best practices and compliance standards.
• Implement data governance, monitoring, and quality assurance practices within Azure environments.
• Troubleshoot and resolve issues in cloud and data pipelines to ensure high availability and performance.

Required Skills and Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.
• Strong experience with Azure services, including Azure Data Factory, Databricks, Synapse Analytics, Azure Storage, and Azure Functions.
• Expertise in data engineering, including ETL/ELT processes, data modeling, and managing structured/unstructured data.
• Proficiency in programming languages such as Python, Scala, or SQL.
• Hands-on experience with big data tools such as Apache Spark, Kafka, or Hadoop.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Responsibilities:

• Serve as the first point of contact for seeking technical assistance, over the phone, remote connection software, chat, and email
• Perform remote troubleshooting through diagnostic techniques and pertinent questions
• Determine the best solution based on the issue and details
• Walk through the problem-solving process
• Direct unresolved issues to the next level of support personnel
• Provide accurate information on IT products or services
• Record events and problems and their resolution in internal ticketing systems.

Requirement:

• Minimum Bachelor's degree is required.
• Technical support professional with 3 years’ experience in the IT technical support / Desktop Support focused on end-user support
• Good experience in support and troubleshooting Windows and Mac OS including mobile devices (iOS and Android mobile operating systems)
• Ability to diagnose and resolve basic to moderately complex end-user technical issues
• Experience with setup and configuration of end-user desktop and laptop computer hardware, software, phones and peripherals.Technical Support / Desktop Support Engineer.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394

EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.

• Location: Tuas Avenue
• Working Days: 5 days (Mon-Fri)
• Working hours : 7:30am to 5:15pm
• Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Provide technical support, maintenance, and troubleshooting for customer systems, including Servers, PCs, Notebooks, Macs, and Printers.
• Travel to customer sites for on-site servicing, maintenance, and troubleshooting tasks.
• Installation, configuration, and maintenance of Microsoft 365, Microsoft Azure, Acronis Cloud, Sophos Cloud, and other services.
• Work closely with the Team Lead on projects involving technologies like CCTV and system solutions, Active Directory, cloud migrations, and file servers to gain hands-on experience.
• Document system configurations and ensure all maintenance and troubleshooting tasks are properly logged.
• Collaborate with internal teams to ensure the highest level of service delivery and customer satisfaction.

Requirements:

• Must possess at least an ITE/Diploma/Advanced/Higher/Graduate Diploma in Engineering (Computer/Telecommunication) or equivalent.
• At least 1 year of working experience in a related field is required. Fresh graduates may also be considered.
• Experience working in a System Integration (SI) environment is a plus.

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://sg.go.persolkelly.com/job/apply/10543>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Job Responsibilities:

• Design, develop, and maintain robust and scalable web applications.
• Develop and implement front-end design, back-end design and function.
• Write clean, efficient, and well-documented code.
• Perform code reviews and provide constructive feedback.
• Lead remote development team to deliver within scope on time.
• Troubleshoot and resolve technical issues if any.

Requirements:

• Possesss over 8 years of industry experience with 5 full software development lifecycles.
• Proven Full Stack Developer with MEAN/MERN stacks, strong skills in HTML, CSS, JavaScript (TypeScript), and React/Svelte. Proficient in Golang, JavaScript, and database systems (MySQL, PostgreSQL, MongoDB).
• Expertise in RESTful APIs, GraphQL, web services, and web application architecture.
• Familiar with asynchronous/message-driven architectures.
• PMP, CISSP, OpenJS, Kafka, and Scrum certifications are a plus.
• Excellent problem-solving, communication, and teamwork skills; able to work independently or in a team.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Salary: Up to basic $3.8K + $850 transport allowance + $250 meal allowance.

Location: Woodlands, Tampines

Working hours: 9am - 6pm (Mon - Fri)

Responsibilities

• Responsible for setting up, installing, and troubleshooting of semiconductor equipment at customer sites (cleanroom environment)
• Responsible for providing pre and post sales technical support to service and upgrade equipment.
• Assist in technical training for customers on setup, operations and maintenance.
• Build and maintain strong customer relationship.
• Other ad hoc duties assigned

Requirement

• Minimum Diploma/ Degree in Engineering or related field
• No experience needed, training provided!
• Travelling to USA, Europe and India 50% of the time for work

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Seeking experienced and knowledgeable engineer for chiller (central air conditioning).

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit reports
• Execute commissioning processes for new chiller installations
• Adhere to safety protocols and regulations

Requirement:

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.

All qualified applicants, please send in your resume to:

[email protected]

Jacqueline Fong Hsin Ting (R21103226)

Recruit Express Pte Ltd

Company Reg. No. 199601303W

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: Project Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage internal teams, including AV Designer, Drafter, Engineer, Site Engineer, and Safety Officer.
• Coordinate with external stakeholders such as Consultants, Main Contractors, Subcontractors, Manufacturers, and Suppliers to ensure successful project delivery.
• Study and analyze schematic designs and construction drawings to create accurate AV construction drawings.
• Oversee project schedules, budgets, and change orders, and manage the Bill of Material (BOM).
• Ensure customer satisfaction by managing their expectations and delivering a positive customer experience.
• Plan, manage, and allocate necessary resources to ensure project timelines and goals are met.
• Other additional tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 2 years of experience in project management for construction sites or A&A works (preferably related to M&E or ELV solutions such as CCTV or structured cabling).
• With Audio Visual technical knowledge or project management experience is a plus.
• Ability to interpret construction drawings.
• Able to work independently in a fast-paced environment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Role: FX and Cross Currency Support Engineer

Position Type: Contract

Location: Singapore

Key Responsibilities:

• FX and Cross Currency Domain Knowledge:
  • Apply deep understanding of FX and cross currency markets to support our payment systems.
  • Collaborate with trading and risk teams to address and resolve issues.
• L2 Production Support:
  • Provide Level 2 production support for FX and cross currency payment platforms.
  • Troubleshoot and resolve complex technical issues in a timely manner.
  • Ensure high availability and reliability of production systems.
• Site Reliability Engineering (SRE):
  • Implement SRE best practices to improve system reliability and performance.
  • Automate operational processes and develop tools to enhance system monitoring and alerting.
  • Conduct root cause analysis and implement preventive measures.
• Monitoring Tool Development:
  • Design and build robust monitoring tools to proactively identify and address system issues.
  • Integrate monitoring solutions with existing infrastructure and applications.
• Cloud / AWS Exposure:
  • Exposure to AWS services to deploy, manage, and scale applications.
  • Implement cloud-based solutions to enhance system performance and reliability.
  • Ensure compliance with security and governance standards in cloud environments.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Job Description

• Industry/ Organization Type: IT Consultancy Firm
• Position Title: IT Sales Executive/ Sales Engineer
• Working Location: Ang Mo Kio
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4,000 + Commission + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Drive growth and meet sales targets by acquiring new customers.
• Develop and implement a strategic sales plan to expand the customer base.
• Provide sales, revenue, and expense reports, along with realistic forecasts, to the management team.
• Recognize emerging markets and market changes while staying informed about new products and competitive landscape.
• Comprehend the characteristics of our ideal customers and their connection to our products.
• Foster and maintain strong, long-term customer relationships by collaborating with them and addressing their needs.

APPLY NOW!!!

• Minimum Diploma in IT, Computer Science or related discipline.
• At least 2 years in Enterprise Software/ Security Software channel sales or channel partner development.
• Able to travel to Asia Pacific countries as and when needed.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70399 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

· Must have minimum 5 years’ experience.

· Strong technical knowledge and experience in supporting enterprise-level applications.

· Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

· Experience with databases and SQL query language.

· Familiarity with software development life cycle (SDLC) and ITIL principles.

· Excellent problem-solving and analytical skills.

· Effective communication and collaboration abilities.

Preferred Skillset

· Java

· Oracle Database

· MySQL Database

· Jira

· Excel

· Hosting Platform

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description:

• Review technical specifications/drawings from client;
• Coordinate internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are met and meet project schedules;
• Develop cost estimates for equipment and works.
• Prepare technical submissions and liaise with client/project consultant for submission approval;
• Ensure technical requirements defined in the contract are properly incorporated in the project deliverables;
• Handle and resolve all site technical relating matters.
• Support on the testing and commissioning work.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Assist the Managers in engineering co-ordinations and in administrative duties (management of sub-contractors / vendors, etc.);
• Perform other Duties assigned by the direct supervisor

Requirement

• Bachelor Degree in Electrical / Mechanical / Chemical / Civil/ Building Structure/ Environmental Engineering
• Team player with good interpersonal skills.
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Proficient in Microsoft Office

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for QC/LAB Equipment Validation Engineers to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Looking for candidates with 3-5 years QC/Lab Equipment Validation experience.
• Provide technical support to run and validate necessary test methods on lab equipment and in developing method transfer/validation protocols and reports.
• Perform qualification and validation for in process, release and stability equipment (HPLC, UV, TOC, pH, etc).
• Manage day-to-day Quality Control/LAB Validation activities in accordance with approved Project Plans and Policies for a fast-paced brownfield project.
• Help with lab system validation, develop and oversea system qualification
• Review and Approve C&Q plans/protocols/reports and GxP SOPs/records
• Review validation life-cycle documents during the commissioning, qualification (IQ/OQ), and validation (PQ) phase e.g., pre and post-execution commissioning/ qualification plans and test specifications, validation summary reports & etc.
• Ensure that documents are in compliance with quality standards and applicable regulatory requirements
• Review engineering change control to evaluate the validation/quality impact(s).
• Support in the resolution of validation deviations and approval.
• Participate in the qualification coordination meeting to ensure correct event sequence in compliance

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

[Order Number:671284]

Responsibilities

• Support customers' engineers in developing Dry Etch processes.
• Create or refine process formulations, determine equipment requirements, and review techniques used in manufacturing and evaluation.
• Collaborate with engineering and scientific teams to align process designs with technical requirements.
• Analyze test data to establish specifications and acceptable limits for materials and processes.
• Define and manage projects involving new concepts, automation technologies, and process improvements.
• Work closely with cross-functional teams to resolve process and integration challenges.

Requirements

• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication and interpersonal skills.
• Detail-oriented, organized, and resourceful team player.
• Self-motivated and capable of working independently with minimal supervision.
• Comfortable working in a cleanroom environment.
• Experience in project management is a plus.

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Liew Lee Hui

EA Personnel Registration Number: R22109864

EA License no.: 07C5771

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Sales Engineer / Manager
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 8000 + Allowances + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Formulate and execute sales strategies to meet or exceed revenue targets.
• Proactively identify and capitalize on new business opportunities within the BESS/ESS market.
• Cultivate and sustain robust relationships with clients, partners, and key stakeholders.
• Offer technical guidance and detailed product insights to clients to facilitate informed decisions.
• Develop and present persuasive presentations and proposals tailored to client needs.
• Maintain a keen awareness of industry trends, market shifts, and competitive dynamics.
• Work closely with marketing and product development teams to ensure sales strategies are integrated with overall business objectives.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering
• Min 3 years of working experience in Sales, specifically within the energy storage or EV charging industry
• Proficient in Microsoft Office and CRM software
• Willingness to travel across the Southeast Asian region as needed

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69365 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De