Location: Ubi

Working hours: Mon - Fri | 8:30am to 5:30pm

Benefits:

- AWS and Bonuses

(Subjected to performance during interview)

Responsibilities:

- Perform thorough specification and drawing studies, coordinate inspections, and highlight any discrepancies discovered.

- Advise site supervisors as instructed by RE or RTO, and discuss discrepancies with sub-subcontractors regarding drawings and work methodology.

- Collate all necessary reports and inspection forms for installation documentation

- Assist supervisors and subcontractors in resolving site discrepancies and constraints

- Oversee working methods according to safety requirements with guidance from the WSHO when needed

Requirement:

- Must possess a BIM Certificate, specialised in Civil and Structure

- Having 3 or more years of working experience in established Building Construction Company will be a bonus

( Projects involving school and institutions construction)

Grace Koa

Reg No.: R23115224

EA Licence no.: 21C0845

Assume a challenging and rewarding role in driving infrastructure excellence at an iconic organization. Your unique talent and skills will enable you to make a lasting impact.

As an Infrastructure Engineer I, Application Support at JPMorgan Chase within the Infrastructure Platforms, Identity & Access Management team, you apply baseline technical knowledge to assignments aligned to you. The assignments may consist of parts of a single technical area, application, software, or technical methodology within the infrastructure engineering discipline.

Job responsibilities:

• Takes detailed directions from team leaders to analyze data and systems and conduct problem solving

• Supports discussions with team and peers on technical matters relating to platforms, servers, and networks

• Uses JPMorgan Chase practices, procedures, and operating standards to guide decisions with regular oversight

• Considers baseline upstream/downstream system and technical implications

• Tackles routine technical tasks and issues such as collecting, analyzing, and monitoring data in test and production

• Adds to team culture of diversity, equity, inclusion, and respect

• Develops solution to automate manual & operational task

• Contributes to root cause analysis and post-mortem to identify and eliminate gaps and improve service

• Manages the availability, performance, incident & change management

• Engages with the engineering team throughout the product/application life cycle to help build for reliability

Required qualifications, capabilities, and skills:

• Bachelor’s degree in Computer Science, Information Systems, Engineering, or related disciplines

• Minimum 1 year of experience in a support and/or development role

• Baseline knowledge of hardware, networking terminology, databases, storage engineering, deployment practices, integration, automation, scaling and resilience performance assessments

• Ability to execute basic solution design, development, and technical troubleshooting

• Ability to articulate technical and non-technical information and understand when to escalate issues

• Basic knowledge of one specific infrastructure technology and basic programming languages (e.g., Scripting, Python, etc.)

• Basic knowledge of cloud infrastructure

• Interest about modern technologies and familiarity with industry-wide technology trends and best practices

• Working knowledge of development toolset to design, develop, test, deploy, maintain, and improve software ability to work collaboratively in teams and develop meaningful relationships to achieve common goals

• Experience with Public Cloud offering related to compute, storage, networking, messaging, automation (CloudFormation, Terraform, etc.) and data

• Ability to provide occasional weekend support as part of the shift rotation (part of the global team who provide 24x7x365 coverage)

Preferred qualifications, capabilities, and skills:

• Experience with Agile and full software development life cycle disciplines

• Experience with CI/CD pipeline and testing framework

• Familiarity with AWS Cloud

• Experience with Application support activities in Monitoring and troubleshooting the issues

• Experience with Infrastructure activities like application setup and maintain across multiple datacenters

• Experience with system administration in Linux and/or Windows platforms

• Experience supporting End-User issues via ticketing systems (e.g., ServiceNow, Jira)

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=8b2cbf0f1e84801fb6e22ca1fa67eefc

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Engineer (Japanese-speaking)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Fresh Graduates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Possess good speaking and writing in the Japanese language.
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

The Job:

• Discover business opportunities, analyze databases, and assess market potential.
• Conduct market research and develop unique business strategies.
• Contribute to sales and marketing activities.

The Talent:

• 1-2 years of sales experience in technical or any relevant industry
• Fresh graduate is welcome as training will be provided
• Own vehicle is required

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

Role Overview:

Marine Service Engineers install, commission and repair the company’s full range of commercial products (Singapore, Southeast Asia and Worldwide). Promote the Service Organisation in SG. Provide technical support to internal and external customers.

• To perform service in Singapore and Southeast Asia, and when required worldwide, including troubleshooting, spare parts identification, repairs and maintenance of all equipment that Company sold to the ships.
• Write Service Report accurately and professionally in IFS MWO.
• To perform Supervision of Installation and Commissioning for new build ships where applicable.
• To take reasonable care for their own health and safety and that of other persons around you.
• Participate in Technical Training programs.
• Keep updated with all the Company new instructions on technical instructions, product changes, manuals etc.
• As required, provide global technical support to customers and/or other engineers.
• To support service control and other engineers with technical issues.
• To support the Service Agent network.
• To be aware of and comply with company standards of conduct and all relevant statutory requirements.
• To carry out any other reasonable management requests.
• To create and communicate process for any duty for which job holder is ensuring involvement from all.
• To be aware of and comply with Company Standards of Conduct and all relevant statutory requirements.
• To carry out any other reasonable management request

Required Skills:

• Minimum Electronics and Computer Diploma or equivalent.
• Experience of practical fault-finding on complex electronic equipments and systems.
• PC configuration experience with networking and IT skills.
• Ability to work at height or in confined spaces.
• Ability to work outdoors in all weathers.
• Ability to work away from home, weekends and overtime, often at short notice.
• Ability to work effectively on their own or as part of a team.
• A flexible and motivated work ethic.
• Ability to take the lead on projects and installations including planning and costing.
• Good communication skills internally and externally
• Personal background which will allow granting of SC clearance for military contracts- where applicable.
• Good English language – oral, reading and writing.
• Able to work in full English environment both internally and externally.

Highly Desirable:

• Experience in a marine electronics environment.
• Knowledge of computer hardware and network systems.
• Exposure to a wide variety of industry standards e.g. Navigation network system, Modbus, Control Logix, Ethernet.
• Installation/Repair/Service of navigation systems.
• GMDSS General Operators Certificate. Annual Radio Surveys for Class Societies.
• Driving Licence

Acquirable:

• In depth knowledge of operation of marine radars, gyros, autopilot, automation, VDR etc.
• Offshore Survival Certificate (rig work), CONDO training for deployed warship support.

Tricentis is looking for a full-time resource to onboard customers with our software testing solutions. The primary role of this individual will be to assist customers through the installation, upgrade, data migration, and troubleshooting of Tricentis On Premise products. The Technical Services Engineer will also provide internal teams with feedback to improve the reliability and scalability of our products/processes and assist Sales Engineers in scoping technical requirements for prospective Customers.

The Global Technical Services Team's primary goal is to ensure our customers love the results of their Tricentis products through exceptional onboarding and ongoing engagements. You will be interacting with customers daily, ensuring that our software is deployed and easily incorporated into their evolving enterprise architecture. You will be playing a critical role in driving successful adoption and continued use among the 10,000+ users of Tricentis’ products across the globe through onboarding best practices. Additionally, this role will interface internally with all parts of the Tricentis organization.

As part of a growing team, the Technical Services Engineer will be a key contributor to our customers’ success. Tricentis’ largest customers will look towards the Technical Services Engineer for advice to ensure that our software is installed properly and optimized to fit into their existing infrastructure.

Additionally, as this is a predominantly customer facing role, the Technical Services Engineer should be willing to escalate potential roadblocks to Senior Management as needed and ensure critical tasks are documented appropriately.

What you’ll do:

• Interact directly with current and prospective customers to ensure Tricentis testing tools are installed and working properly in their environment; including initial product configuration and integration with customer systems and tools
• Install and troubleshoot Java-based applications on Windows, and Linux platforms
• Install and troubleshoot C#/dotnet core applications on Windows
• Manage containerized application deployment using CNCF tools and industry standard tooling (i.e. Kubernetes, OpenShift, Helm)
• After Tricentis software is installed, validate basic functionality for each client installation to ensure client expectations are met and software is working optimally
• Assist Customer Success Managers, Engagement Managers, and Consultants by engaging to meet quick turnarounds for troubleshooting customer issues across the APAC region, periodically working outside of normal office hours and weekends
• Participate with Development, Engineering, Product Management and QA for Application Installability testing
• Provide customer assistance with On Premise product updates upon release
• Advising customers on best practices for network, security, and hardware configurations to optimize the use of Tricentis’ products
• Interacting with the Customer Success, Technical Support and Product Development, Product Management teams to escalate and resolve product issues
• Potential onsite travel to visit customer sites (<5%)

Who you are:

Required Skills:

• Minimum 3 to 5 years of experience in an Engineering or DevOps role
• B.S. in computer science or software engineering or equivalent experience
• Excellent written and spoken communication skills in both English and Mandarin desired
• Experience working with cross-functional teams located in multiple time-zones
• Experience with application deployment, configuration, and troubleshooting Windows applications
• Experience with relational databases such as PostgreSQL, MSSQL, Oracle DB, and IBM DB2
• Experience with NoSQL databases such as MongoDB
• Experience with Linux and Windows OS administration
• Experience working with Infrastructure-as-a-Service (IaaS) and cloud platform operations (AWS, Azure, GCP)
• Experience with Cluster or High Availability environments
• Experience working with container orchestration platforms (Kubernetes, OpenShift)
• Familiarity with common industry tooling such as Elasticsearch, Jira, and Jenkins
• Ability to deploy and troubleshoot containerized applications using CNCF tools and industry standard tooling (Docker, CRI-O, Containerd, Podman)
• Experience with package management, configuration, and troubleshooting Linux applications
• Experience with user authentication methods and applications (Active Directory, LDAP, SSO, OAuth, SAML, Federation Server, Okta)
• Working knowledge of Enterprise Network Infrastructures, Enterprise Firewall Configuration, Application Load Balancing, OS Firewall configuration

Desired Skills:

• Multilingual
• Understanding of Cloud Native best practices
• Experience implementing CI/CD pipelines
• Experience with continuous delivery and automation tools
• Familiarity with connecting ALMs, build servers and automation frameworks (e.g. JIRA, Jenkins, etc.)
• Experience with Atlassian Products (Jira, Confluence) and integrating applications with the Atlassian ALM software suite.
• MSI Installer Troubleshooting
• Additional skills in the following are a plus: DotNet Core, Powershell, C#, JAVA, JVM, Node.js, Bash

At Tricentis, we strive for success while inspiring those around us by knowing what we need to achieve and how we’ll achieve it. Our core values serve as our guiding light to drive our every action and define our ways of working so that we can create and enjoy a successful journey and reach higher heights together.

• Demonstrate Self-Awareness: Own your strengths and limitations.
• Finish What We Start: Do what we say we are going to do.
• Move Fast: Create momentum and efficiency.
• Run Towards Change: Challenge the status quo.
• Serve Our Customers & Communities: Create a positive experience with each interaction.
• Solve Problems Together: We win or lose as one team.
• Think Big & Believe: Set extraordinary goals and believe you can achieve them.

We offer:

• Market competitive salary + success-oriented bonus
• Flexible working hours in a hybrid model
• Favourable working atmosphere in a rapidly expanding company
• Personal and professional development
• Permanent, full-time employment
• And more!

Tricentis is proud to be an equal opportunity workplace. Qualified applicants will receive consideration for employment without regard to race, colour, ethnicity, gender, religious affiliation, age, sexual orientation, socioeconomic status, or physical and mental disability and other statuses protected by law.

Our client is a well-established MNC, market leader in the Water industry. They are looking for a Procurement Engineer to assist their Procurement team for the next phrase of their business. They are located in Central – easily accessible. This Senior Purchaser would be responsible for :

• Responsible for vendor management to ensure approved vendors meet the delivery, quality and cost standards
• Responsible for the negotiation to ensure and improve suppliers' price competitiveness, lead-time and on time delivery
• Ensure all necessary documents are in place
• Responsible to provide customers with solutions and internal cross functional teams, for cost effectiveness
• Responsible for materials planning
• Liaise with forwarder for shipping arrangment

Job Requirements:

• Diploma / Degree in any discipline
• Minimum 3 years of relevant experience in Oil & Gas industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Mechanical Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Prepare equipment specifications, requisitions, and conduct technical bid evaluations.
• Review and assess vendor bids and documentation for technical suitability, providing valuable recommendations.
• Collaborate with the Process Discipline and review equipment process data to ensure consistency.
• Foster effective communication and information exchange with other design groups, offering technical support as needed, and ensuring seamless interfaces between relevant drawings.
• Ensure compliance with the Client's Standards and Engineering Practices, following the Project Coordination Procedure diligently.
• Exercise control over Vendor's drawings and documents, ensuring adherence to PO requirements, and facilitating information exchange with other disciplines.
• Review and provide constructive feedback on various documents, including flow sheets, P&ID, equipment lists, plot plans, performance curves for pump, motor, and air blower, equipment foundation drawings, etc.

Requirements:

• Minimum of Bachelor Degree in Mechanical Engineering
• Minimum of 5 years hands on experience in handling Basic and Detail Engineering jobs for Oil & Gas or Offshore & marine industry.
• Good knowledge and hands on experience with international codes & standards
• Knowledge of Microsoft Office 365, AutoCAD LT and Navisworks

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Benefits Summary:

• MNC Semiconductor Manufacturing Equipment Company
• Up to $5,500
• Mon - Fri, 8.30am - 5.30pm
• Location: Ang Mo Kio

Responsibilities:

• Create a plan for software regression and validation for semiconductor equipment.
• Create and maintain documentation for software validation that includes test plans and software configuration parameters.
• Create test cases and scripts, then run them to verify the functionality and performance of the product.
• Regression testing
• Work together with the software design team and the appropriate stakeholders to make sure that the software products adhere to industry standards and customer needs.
• Examine test results and give pertinent stakeholders comments.
• Take part in design evaluations.
• Conduct troubleshooting and present results to address software flaws and problems.
• Keep abreast of market developments and recommended procedures for software validation and quality control.

Additional Information:

• Bachelor's degree in electrical engineering, computer science, or a comparable discipline
• Five years of software validation and quality control experience with semiconductor equipment
• Comprehensive knowledge of software development approaches and semiconductor hardware
• Understanding of industry standards for semiconductors, such as SEMI secsgem
• It will be advantageous to have knowledge of programming languages like Python and VBA.
• Outstanding ability to analyze and solve problems
• Effective teamwork and communication abilities
• An eye for detail and the capacity to work both individually and collaboratively

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at

http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Toh Qiu Wei | EA Personnel No.: R23116260

Our client is a construction company and is looking to hire a M&E Coordinator or Engineer.

Job Responsibilities:

• Coordinate and management of all M&E works
• Ensure all M&E works are performing on time, within budget and in compliance with all necessary standards, code of practice and safety regulations
• Responsible for the supervision and coordination of M&E works at project site
• Understand Main Contract /Subcontract requirement
• Monitor progress, quality of workmanship and compliance with requirements
• Prepare structural penetration shop-drawing for approval
• Prepare M&E coordination drawings and liaise with Architectural Coordinators and Design Engineers to issue drawing for approval
• Any other duties assigned

Job Requirements:

· Minimum 2 years experience

· For M&E COORDINATOR : Diploma/Specialist Diploma or equivalent

· For M&E ENGINEER : Degree in Mechanical Engineering

· 5.5 day work week, 8AM to 6PM (6 days week during first 6 months)

· Work location is at Aljunied

Candidates interested in the advertised position may apply online. We regret that only shortlisted candidates will be notified.

MTM Engage | EA License No.: 21C0385 | EA Registration No.: R21103667 (Lew Zhi Yang) | www.mtm-engage.com

The Cost Engineer develops project budgets and cost estimates for all phases of a project in the oil/refinery/process industry. Responsible for controlling, forecasting and reporting project costs. Experience in projects and plant turnaround works in the oil/refinery/process industry.

Responsibilities

1. Responsible for the practical application of Cost/Finance Standards including Work Processes, Estimating and Budgeting Practices and Cost Control Practices
2. Implements cost management and reporting processes for project execution plan.
3. Responsible for setup of project WBS in the cost forecasting tool, with proper tracking through purchase orders.
4. Responsible for preparation of project budgets.
5. Integrate scope growth, addendum and variation into the project forecasts.
6. Develop composite rates for project cost estimates.
7. Validate all supplier and contractor invoices, ensure proper approval for payments.
8. Closing of each project WBS to meet financial requirements including closing of Purchase Orders.
9. Set up vendor files, rates, and contract terms and conditions.
10. Gather all committed cost data into project cost forecasts.
11. Analyzes all costs, highlights concern and communicate all exceptions to stakeholders.
12. Responsible to track planned vs actual spent against estimate during project execution.

Requirements

1. Bachelor’s Degree of any Engineering Discipline.
2. Minimum 5 years’ experience in planning & execution of oil/refinery/process plants projects and turnarounds.
3. Experience in budgeting, contract and cost management.
4. Written and verbal communication skills
5. Works effectively in a team environment.
6. Computer skills - MS Office, GSAP, and Project Controls tools.

Brief Description:
Implementation, handling and troubling network-related matters

Scope of Work:

• Perform network administration
• Maintains network performance by performing network monitoring and analysis and performance tuning; troubleshooting network problems; escalating problems to vendor
• Administer and manage switches, routers, firewall and anti-virus systems
• Responsible for testing, commissioning, configuration, maintenance and operation of new network equipment
• Assist with VPN configurations and wireless troubleshooting
• Create and maintain documentation related to network configuration, policies, procedures and service records
• Participate and provide technical support in network implementation projects whenever required
• Provide standby remote support during weekends and after working hours for any production network related incidents
• Reporting network tasks and projects status to key stakeholders

Qualifications and Experience:

• Relevant network certifications, Prefer to have Cisco CCNA certification
• Minimum 3 years of IT experience in network management is preferred
• Good knowledge of Rack & Stack, Firewall, Routers, Switches, VPN and LAN/WAN technologies such as TCP/IP networking
• Strong experience with network & IT security
• Able to work independently and is a good team player
• Strong communication skills and interpersonal skills
• Possess good technical problem-solving and troubleshooting skills

Contract Type: 12 months

Salary: SGD4,000 to SGD5,500

Location: Punggol / East Coast / Jurong

Working Hours: Rotational shift
- i. Mon – Fri 8:30am to 4:30pm (onsite), Sat 9:00am to 1:00pm. (onsite)
- ii. Mon – Fri 10:00am to 7:00pm (onsite), Sat 9:00am to 1:00pm. (onsite)

Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $4,000.00 - $5,000.00 per month

Schedule:

• Monday to Friday
• Weekend availability

Experience:

• Network engineering: 1 year (Required)

Work Location: One location

Job Type: Contract

Contract length: 12 months

Salary: $4,000.00 - $5,200.00 per month

Experience:

• Network engineering: 3 years (Preferred)

Work Location: In person

We are looking for Avaloq professionals with a track record or deep experience in software development and support. If you are a certified Avaloq developer or support, we would like to talk to you. Send us your CV and be specific about your Avaloq certification, experience and more importantly, achievements.

Requirements

• IT or related degree
• Minimum 3 years of work experience in Avaloq web banking, CAPI or AMI Web Service
• Experience in Avaloq Release Upgrade is advantageous
• Avaloq certification preferred

Reports to the Principal Commissioning Engineer and is responsible for the development & execution of Telecom discipline specific procedures and method statements, pre-commissioning, commissioning and start-up deliverables, participation in design workshops, input to the development of Schedule and Cost Estimate on EPCI Projects.

Responsibilities:

Key Tasks and Responsibilities:

• Work collaboratively within the Project team and with Client to maintain positive relationships.
• Enagaged in Trainings with the team on data collection, performance/monitoring or other required reports by the project.
• Responsible for the development of commissioning and start-up deliverables on the project.
• Participates in the Modularization and Constructability Studies.
• Provides input for the development of a Commissioning Schedule and the integration into the overall EPC Schedule.
• Provides input to scope of work subcontracted packages as required for the cost estimate.
• Responsible for quality control of the Gas Turbine overhauls, ensuring conformity to appropriate Gas Turbine engineering specifications to meet the project requirements.
• Provides input for Spares, Temporary Equipment, Consumables and Tools as required for the EPC cost estimate.
• Mointor adequate stock levels of spare parts for the operation needs as well as covering the requirements of scheduled maintenance work.
• Provide inputs to CMS (commissioning management system) to develop and outline the commissioning scope.
• Enable resource forecast & manpower loadings.
• Manage the timely delivery of documentation, pre-commissioning & commissioning materials, personnel and vendors aligned to execution schedule.
• Attends Coordination & progress review Meeting and reports pre-commissioning and commissioning progress on daily basis.
• Reports to the Principal commissioning Engineer.

Qualifications

Essential Qualifications and Education:

• Preferably possess a degree (or equivalent) in either Electricial & Electronics Engineering.
• 12+ years of Experience in Commissioning execution, particularly Gas Turbines projects.
• Have pre-commissioning, commissioning and start-up experience as a Senior Level in the Oil & Gas industry.
• Thorough understanding of the EPCI Project with good knowledge of Engineering and Construction activities scheduling knowledge.
• Have expereince in Planning, Scheduling and executing the Retrofits, Overhauling, maintenance, and Commissioning of Gas Turbines.
• Have abilties to troubshoot and & analyzed operational issues such as trips, alarms, high temperatures, spreads, hydraulic system faults, etc.
• Ability to extend technical support to the customer’s engineering staff in implementation of TILS’s/NIC’s/FTI’s/GER’ for Gas Turbines.
• Demonstrates a broad technical knowledge of construction and system completion activities.
• Able to effectively communicate technical solutions and concepts to other engineers and non-engineers.
• Must have strong English communications skills, both oral and written.
• Must have excellent computer software skills in MS Office suite as a minimum.
• Must have good Presentation skills for meetings with Engineering, Project Management and Client.
• Must have excellent organizational skills and be adaptable to various needs of various discipline groups.

• Up to $5,000 Basic + Bonus + Benefits
• Permanent position/ based in Singapore HQ at Paya Lebar/ 5 workdays/ Overseas business trip available
• knowledge in Electrical/ Mechanical design and construction of building projects preferred.

Our Client, a reputable MNC and leading A1 Main contractor diverse in building, civil and infrastructure projects.

Job Responsibilities:

• Reporting to HOD
• Research and support in implement M&E Design Standard in local and overseas branch office.
• Participate in design progress from Bidding, Design, Construction and Hand-over.
• Review RFP documents/drawings for Bid
• Review and check the design & quality of design documents/drawings, MEP-simulation-model from the Electrical/ Mechanical design viewpoint.
• Site inspection to Appraise works/ products to ensure compliance to specifications and requirements if required.

Job Requirements:

• Bachelor’s Degree in Electrical/ Mechanical Engineering or related field.
• Minimum 2 years of relevant working experience.
• knowledge in Electrical/ Mechanical design and construction of building projects preferred.

Other Information:

To apply please click on the APPLY button to submit your resume with the following details:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified.
Lionel Cheow
EA License | 14C7092
EA Registration Number | R1105005

Job Scope

• Read and understand the Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Create the Offline CNC programs using UG NX 7.5/8.5/10 and above for Aerospace components
• Component prove out on Machining, Turning and Turn mill and 5 Axis centres
• Readout CNC codes including probing cycles for program creation
• Simulation using Vericut software and beginner level knowledge on Machine and Control building in Vericut
• Strong fundamental knowledge in Manufacturing Engineering
• Generate 3D models using NX

Key Technical/Professional Competencies

• Read and understand Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Create offline CNC programs using NX7.5 and above for Aero engine and Structural components
• Proven Experience in CATIA V5 CNC Programming is an added advantage
• Knowledge of Team center functions
• Hands on Experience of Component prove out on Machining, Turning and Turn mill centers
• Thorough knowledge on Cutting tools and fluids
• Ability to readout CNC codes including probing cycles.
• Simulation using Vericut software and beginner level knowledge on Machine and Control building in Vericut
• Strong fundamental knowledge in Manufacturing Engineering
• Should be proficient enoughto generate 3D models using NX
• Should be proficient to use and implement tollgate systems and be able to perform self-defect management with problem solving ability
• All work should be self-engineered, mistake proof and produce a ready to use output.
• Optimization in Programming and machining techniques
• Awareness of aerospace quality requirements

Required Qualifications & Experience

• Diploma / Graduate in Mechanical Engineering
• Minimum hands on experience in Manufacturing Engineering 3-8 years
• At least two years experience in Offline programming ( UG NX, CATIA ,ESPIRIT)
• Should have background on Quality Management Systems
• Sound Shop Floor background

Non Mandatory Skills

• Good understanding of Aerospace and Auto components
• Experience in VBA coding is added advantage

• Supervise, organize and plan activities to ensure smooth fabrication and construction of structures within the stipulated schedule
• Prepare and plan project progress reports ahead of activities to be completed
• Redline markup drawings to be done progressively and update engineering
• Review technical drawings and advise engineering of any discrepancies before commencing any fabrication works
• Perform MTO and update progressively to ensure proper control of material procurement and usage
• Ensure that manpower is effectively deployed to deliver the products timely
• Follow up on all fabrication and installation job fit up, welding and inspection
• Understand and ensure compliance in project requirement and scope of work
• Manage and ensure subcontractor performance in line with provided schedule
• Resolve any technical problems or issues faced at the work site
• Attend the daily tool box meeting and convey instructions clearly

EUC Engineer (Fixed shift)

Brief Description:

End-User Support, strong in supporting all windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Experienced in troubleshooting both desktop/laptop hardware and software.
• Single point of contact for end-users to log incident and service requests via email and hotline.
• Support user queries or issues are captured and validated for further processing.
• Coordinate with different support teams (including vendor coordination) to ensure issues are resolved with proper resolution recorded.
• Adhere to the SOP and Policy defined.
• Responsible for Call logging, Assignment, Incident Management & Coordination, Call Tracking and follow‐up until closure within the agreed SLA.
• Implementing best practices to reduce time and increase efficiency.
• Incident ownership, monitoring, tracking and communication with all parties.
• Focus on First Call resolution to ensure early closure of tickets.
• Day-to-day onsite IT support for hardware and software issues involving end-user desktops/notebooks, client’s network connectivity
• Install applications/software and apply updates/patches to desktops, notebooks and other end-user computing devices
• Preparation of desktop/notebook system image
• User account management (Account creation, deletion, modification, and reset password in accordance with Customer's process and procedures)
• Perform file backup, migration and restoration for end-users' desktops/notebooks

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience with hands-on experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)

Salary: SGD2,800 to SGD3,500

Location: Jurong, Suntec, East Coast, Punggol

Working Hours: Fixed shift
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)

Commencement: Immediate

• 2 years contract, renewable
• Basic up to $3000 + Allowances + VB
• Mon to Fri; 8.30am - 5.50pm
• Location: Bedok

Responsibilities:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is prefer.

Additional Information:

• 0-1 year of Server experience
• Able to work on scheduled standby on rotating weeks

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Edmund Chung Keng Loon
Registration Number: R1986801
EA License No: 06C2859 (MCI Career Services Pte Ltd)

EUC Engineer L2

Brief Description:

End-User Support, strong in supporting all Windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Basic help desk resolution and service desk delivery.
• Routine System administrative activities
• Resolve incidents escalated by L1/Helpdesk as per the agreed SLAs and timelines. They usually have a Run-Book/KB which they can refer to for immediate resolutions. They are also supposed to coordinate with any other support or dependency groups in case the incident has any linkage.
• Troubleshooting for Alert logs files, transaction logs and backup logs.
• Troubleshoot End to End User Devices
• Run the backups, recovery errors, respond to the request regarding the restoration of the DB
• Responsible on making backup tapes schedule and changes.
• Monitor the metric alerts, performance-related issues like high CPU utilization, Application performance, high Memory utilization, Application tuning and Query.
• tuning
• Acknowledge the request for DB stop/start, user creation and grant specific data access to user.
• System upgrades/migrations
• Making sure Inventory is updated.
• Escalates the problem to next level/Vendor.
• Good working experience in iOS devices ( iPad, MacBook, & iMac )

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)
Salary: SGD2,800 to SGD3,500
Location: East Coast, Punggol
Working Hours:
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)
Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $2,800.00 - $3,500.00 per month

Schedule:

• Monday to Friday

Work Location: In person

· Minimum 8 years of experience in Data Engineering role with financing industry, ideally in a banking environment

· At least 5 years of development experience with using Microsoft Business Intelligence stack covering

o Tabular Analysis Service

o Data warehousing

o Performance tuning

o Data transformations and quality checks

o Power BI dashboarding and reporting

· Good exposure and usage experience in CI/CD tools / processes preferably Azure DevOps

· Ability to design and present technical solutions to architects and to team

· Proactive and problem solving attitude with ability to anticipate risks.

· Strong communication (written and verbal) and organizational skills

Our client is from Manufacturing industry. They are looking for a NPI Engineer (Value Analysis) to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Job Title: NLP Research Scientist

Job Responsibilities:

Responsible for leading and driving innovative research and development in the field of NLP technology to address the fundamental challenges and core issues in language models, knowledge representation, machine translation, dialogue systems, and text generation. Achieve high impact through the publication of influential papers and the creation of valuable patents. Proactively explore and identify new applications for these cutting-edge technologies.

Job Qualification

● Possess a strong foundation in deep learning, machine learning, and natural language processing, including a thorough understanding of common models. Capable of selecting appropriate models and devising effective technical solutions for problem-solving purposes.

● Demonstrated outstanding publication records in top-tier international conferences and journals like ICLR, ACL, NeurIPS, EMNLP, TACL, etc. Preference given to individuals with experience in LLMs.

● Proficient in popular deep learning frameworks like PyTorch, with comprehensive knowledge of key deep learning models such as Transformer, BERT, GPT, RNN, LSTM, and their implementations.

● Exceptional organizational and communication skills, self-motivated and capable of handling pressure. Possess a strong enthusiasm for acquiring knowledge and a genuine passion for technology.

Our client is from Technology Manufacturing Industry. They are looking for a Sales Engineer to assist their team for the next phase of their business. They are located at West.

Responsibilities:

• Repsonsible for liasing wiht building consultants and contractors
• Accountable for cultivating enduring customer relationships
• Cultivating strong business ties, particularly with key accounts
• Optimizing account penetration and ensuring customer loyalty
• Recognizing potential opportunities and crafting solutions for both existing and new customers
• Timely updating of forecasts into the system
• Negotiating value, overcoming resistance, and finalizing sales. Establishing Trane as the preferred supplier through differentiation
• Ensuring that all activities adhere to specified quality and EHS standards.

Requirements:

• Min Degree in Electrical/Mechanical Engineering
• Experience in HVAC Sales is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• Research and develop air conditioning system/product for industrial and commercial use
• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor's Degree in mechanical Engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering especially chiller operation and optimisation is a plus
• Experience in R&D and product development especially in air conditioning system is a plus
• Knowledge in new product introduction from R&D to commercial stage
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills