1. Electrical System Maintenance:Conduct routine inspections and maintenance of electrical systems on marine vessels.
   Perform preventive maintenance to ensure the continuous and reliable operation of electrical equipment.
   
2. Troubleshooting and Diagnostics:Identify and diagnose electrical issues on ships.
   Use testing equipment and tools to locate and analyze faults in the electrical systems.
   Develop solutions to resolve electrical problems and restore functionality.
   
3. Repair and Replacement:Execute repairs on malfunctioning or damaged electrical components.
   Replace faulty electrical parts or systems as needed.
   Ensure compliance with safety regulations and industry standards during repair activities.
   
4. Installation and Upgrades:Install new electrical systems or components on marine vessels.
   Upgrade existing electrical systems to meet current regulations or improve efficiency.
   Collaborate with other engineering disciplines for integrated system installations.
   
5. Inspection and Compliance:Conduct electrical inspections to ensure compliance with industry standards and regulations.
   Document and report findings, recommending necessary repairs or upgrades to meet compliance requirements.
   
6. Testing and Commissioning:Perform testing procedures on newly installed or repaired electrical systems.
   Commission and verify the proper functioning of electrical equipment before the vessel goes into service.
   
7. Documentation and Reporting:Maintain accurate records of maintenance activities, repairs, and installations.
   Generate reports detailing the status of electrical systems, completed tasks, and recommendations for improvement.
   

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Safety

• Adhere to all the HSE principles and WI during the work.
• Perform risk assessments to ensure all measures are taken to prevent injuries or accidents before commencing any work.
• Identify and report any hazard.

Project

• Possess excellent project management skills by establishing schedules, required resources (both within the organization or 3rd party), and cost of projects and risks identification to implement and execute the required projects.
• Initiate and lead projects relating to cost reduction, efficiency/power, and reliability improvements.
• Work with stakeholders from cross functional teams to establish the project timeline, the execution plan and identify the resources required.
• Identify any safety risk and any potential delay and provide alternative solutions to the issue.
• Ensure timely completion of key milestones and delivery of key project indicators.
• Lead in resolving any quality issues and providing timely updates on the progress.
• Perform data analysis to identify opportunity for improvements or support any ongoing investigations

Benchmarking

• Familiarize with current market news and trend
• Perform benchmarking studies to understand various vendor and competitor cell performances.
• Ability to create excellent customer supplier relationships. The ability to build good relationships is to have excellent interpersonal and communication skills.

Research

• Perform research on improvement ideas and carrying out experiments to test hypothesis.

• Degree in Electrical / Mechanical / Materials / Chemical Engineering.
• Strong knowledge and experience in process integration & development methods.
• Knowledge in PFMEA, DFMEA, DOE, Fish-Bone Analysis, etc.
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and datamining.
• Ability to work in a fast-paced environment and render support to production as and when needed.
• Strong in organization and project management skills.
• Good communication skills across all levels within the organization.
• Commitment to get issues resolved and provide updates in a timely manner
• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Good Team player

Additional Advantageous Skills:

• Prior working experience in Solar / Semiconductors / Electronics manufacturing industries and programming to develop advanced data mining and analysis capabilities will be an advantage.
• Knowledge in electrical characterization, physical characterization and failure analysis tools for systematic troubleshooting and improvement will be advantageous.
• Knowledge in semiconductor / solar cell and module processes will be preferred.

Responsibilities and Duties:

• Configuring, developing and implementing software and components in all functional areas.
• Work with internal stakeholders to understand the technical requirements and scope out modifications and custom development.
• Creating functional requirements and functional specs based on user specification.
• Converting functional requirements to technical specifications.
• Making technical recommendations for installation, modifications and custom development.
• Planning, designing, developing, maintaining and supporting business systems.
• Testing functionality against business requirements.
• Analysing, documenting and suggesting system enhancements through communication with users, management and satisfy business and technical requirements.
• Developing curricula, organizing and delivering formal training on functionality, including customizations.
• Dealing with complex situations, including troubleshooting, issue resolution and critical support.
• Maintaining / administering security settings for users, responsible for overall application security.
• Providing pre-go-live and post-go-live support.
• Planning and executing upgrades and releases.
• Perform data conversions, debug system problems, and craft resolutions.
• Install and implement service packs and hot fixes as needed.
• Act as a technical liaison to business groups for application support.
• Take responsibility for the customized unit programming and overall system functionality.
• Assist users in their day-to-day operations on their queries, errors or feedbacks.

Job Requirement

• Experience in Microsoft Dynamics NAV is an advantage
• Min 2-3 years experience
• Knowledge and experience in coding is an advantage
• Able to work in a fast pace environment
• Able to handle work stress

Job Responsibilities

* Inspect project sites and monitor progress, ensuring work done conforms to safety standards and design specifications while determining if changes or adjustments need to be made
* Test materials and soils to determine the strength of concrete, steel, asphalt and foundations of buildings
* Utilize computer assisted design and other drawing tools to plan and design various types of systems and structures, including roadways, buildings, water systems and tunnels
* Direct and participate in surveying activities to lay out installations and establish grades, reference points and elevations to properly guide construction
* Determine design specifications by computing grade and load requirements and material stress factors
* Manage and direct operations, construction and maintenance activities being done at project sites
* Prepare public reports on various topics, including deeds, bid proposals, property descriptions and environmental impact statements
* Ensure activities comply with all environmental, governmental and safety regulations and address all problems concerning actions that do not comply

Job Skills & Qualifications

Reqiured:* Bachelor’s degree in civil engineering or related field
* Excellent problem solving and communication skills
* Experience or coursework in AutoCADPreferred* Previous experience in an engineering field
* OSHA training and certification
* Prior work on geotechnical, waste management or environmental projects

Job Description:

• Design electrical control systems for machinery and equipment
• Prepare BOM and participate in procurement and supplier management
• Perform electrical wiring and routing of control panels and machinery
• Responsible for PLC and HMI programs for machinery and equipment
• Ability to troubleshoot, debug and commission control systems of machinery and equipment
• Manage and liaise with project team members and suppliers
• Prepare and present project proposals/updates to internal business owners
• Responsible for value-added engineering projects and contributing ideas for improvement
• Any Ad hoc projects / duties as assigned

Pre-Requisition:

• Minimum Degree in Electrical / Electronic / Mechatronics Engineering
• At least 2 years of relevant experience in electrical design and PLC programming
• Strong in PLC and HMI Programming (Mitsubishi, Omron)
• Skill in Electrical Circuit Drawing and Electrical Panel Design with AutoCAD / Draftsight is preferred
• Robot Programming (Yaskawa, ABB, Fanuc, Nachi)
• Expertise in Labview Programming, C++, Communication Protocols (Ethernet, TCP/IP, RS232, CCLink, DeviceNet) will be advantages
• Preferably knowledge of Electrical Power Systems and Instrumentation Control
• Experience in Machine Vision (2D-3D-Bin Picking) with Robotics Integration will be added advantage
• To travel around Asia Regions if needed

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Principal Software Engineer, Network Technology - Singaporeans only

Location: International Business Park

Job Description

We are seeking highly talented Software Engineer, Network Technology with experiences in developing

application or middleware on embedded system (automotive ECU system is preferable) for connectivity and

network functions.

Job Responsibilities

• Design and develop protocol stacks for Vehicle Network/Communication functions or systems

(including but not limited to Ethernet, CAN, LIN, FlexRay, Optical related.)

• Develop subsystem prototyping such as DoIP and SOME/IP stack based ecosystem.

• Lead or participate in product software architecture definition and design which meet automotive OEM

requirement.

• Ensure and carry out forward design process and document quality according to V model to fulfil

stringent automotive industrial ISO standard.

• Implement software programming to realize defined architecture & design.

• Behave independently as technology domain representative for internal and external customers.

Preferred Skills and Experience Requirement

• Strong capability in independent thinking, self-motivation and innovative thinking.

• Deep understanding of network layer components such as IPv4, IPv6, routing, forwarding, TCP/IP.

• Deep knowledge in applying C, C++, JAVA or other scripting for different embedded system

development.

• 8 years' experience in the embedded system development, ARM processor, preferably in automotive

industry.

• Knowledge of software development using embedded C, C++, C#

• Knowledge of OS, data structures and algorithms.

• Knowledge of streaming media protocol and AVB.

• Knowledge of Real-time operating systems (RTOS), Linux, Android Auto or QNX will be added

advantage.

• Experience in developing time-critical functions in embedded systems.

• Proficiency with network monitoring protocols and tools.

• Knowledge of security engineering (building secure systems), Operating Systems and network security,

common attack patterns and exploitation techniques.

• Knowledge of system security analysis techniques such as threat modelling, attack trees etc.

• Excellent written and verbal communication skills.

• Experience with Automotive industrial protocols will be added advantage.

Qualification

• Bachelor's degree or above in Information Security, Electronic, Computer Engineering, Computer

Science or related field

Working Hours:

Monday to Friday

9am to 6pm

Salary :

$4500 to $8500 per month

TEAM (www.teaminc.com) is a world leading specialised engineering services company, operating in more than 20 countries. TEAM’s specialised inspection, condition assessment, maintenance and repair services result in greater safety, reliability, and operational efficiency for our client’s most critical assets. A professional team of experienced engineers, technicians, and client support personnel backs each service, armed with the best on-the-job safety and service training, equipment, and technical support in the industry.

We have an exciting and challenging opportunity, based in our Singapore office, for a Sales Engineer to join the Asia Pacific sales team.

The role provides important technical sales solution to our clients and will require interaction and travel to locations in Singapore and internationally for sales and training.

Job Description:

- Establish relationships with new and existing customer, attend to enquiries and conduct presentation to prospective customers

- Manage accounts of existing customers and ensure sales growth in these accounts

- Perform product sales presentation/training to customers and propose suitable solution according to customer’s need.

- Provide quotation/sales proposal to prospective customer.

- Develop and drive new products business

- Meet the sales target set by the company

- Collaborate with various department to ensure timely delivery of project deliverables.

- Benefit include moblie phone, transport allowance, fuel card and commission

Job requirements:

- Possess Diploma in Engineering, preferably in Mechanical or Materials Engineering

- Effective team player with good communication, presentation skills, result -oriented and customer focused

- Able to work in high stress sales environment and multitasking.

Applicants must include a resume and cover letter outlining how they meet the job requirements.

Job Description

• Develop a preliminary and/or baseline schedule based on the client's requirements/milestones, and scope of work.
• Faciliate and lead interactive project planning sessions with full project team
• Identify the critical path and take note of any foreseeable risk that may affect the project schedule.
• Prepare manpower and equipment loading plans.
• Determine and implement the most efficient sequence of work to ensure it meets the client's and the company's needs.
• Keep track of projects' progress and furnish reports to be used for progress updates, claims, and EOT requests.
• Update the schedule according to site progress and develop a recovery plan for any delays.
• Attend progress meetings with the client and coordinate with stakeholders
• Prepare costings and quotations for project bidding.
• Attend Tender Clarification meetings to fully understand the scope of work, qualifications, and exclusions.
• Prepare progress claims, and follow up on VO's if any.
• Execute and coordinate with client regarding contract remeasurements, and EOT.
• Compile, maintain, and organize documents to be used for claims

Requirements:

• Diploma, Degree in any Engineering
• Proficient with planning and scheduling techniques.
• Strong time management skills with exceptional attention to detail and the ability to manage multiple tasks/ projects at one time.
• Strong skills using Microsoft Word, Excel, PowerPoint and other scheduling software such as Microsoft Project

Computer System Validation (CSV) Engineer

12 month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission.

Responsibilities:

• Understand development of Computer System Validation (CSV) and equipment specifications and executing Computer System Validation, System Development Life Cycle (SDLC), and other pharmaceutical equipment/system commissioning/validation such as installation qualification (IQ), operational qualification (OQ), performance qualification (PQ) protocols in accordance with Good Engineering Practices, GAMP, local SOPs, industry best practices and other industry related guidance documents.
• Assess the impact of changes to cGMP equipment/systems and methods and establish the applicable Validation Plan to ensure the validated status following changes.
• Experience in technical writing and report generation of testing methodologies of automated systems.
• Expertise in evaluating validation protocols and summary reports.
• Strong understanding of Testing and Software Development Lifecycle and QA methodologies.
• Responsible for being a quality contact and primary Subject Matter Expert (SME) for complex deviations for systems, processes, and equipment related to engineering, facilities, automation, manufacturing, and validation.
• Support and review complex deviation investigations related to manufacturing process equipment, utilities, automation, validation, and engineering.
• Work closely with Operations, Facilities, Manufacturing, Automation, Validation, and Engineering to resolve open issues resulting from equipment failures, issues, and deviation record reviews.
• Lead the QA review and assessments of deviations; includes performing risk assessments, leading root cause analysis investigations, tracking, follow-up, close out, and reporting/trending.

Job requirements:

• Minimum 5 years of demonstrated experience in cGMP automation/computerized systems, quality, and compliance areas in the pharmaceutical industry.
• Thorough understanding of industry standards and best practices for computer system validation.
• Extensive experience with validation of equipment controlled by PLCs, BAS/BMS systems, and other typical automated system platforms preferred.

Reg No: R22104540

EA License no: 94C3609

Responsibilities

You are required to manage the assigned projects toward successful handover to clients and subsequently to Service Team within the budgeted cost and quality standard. Direct responsibilities include site supervision, attend site meetings, management of sub-contractors, timely issuance of documentation of project includes variation orders, extension of times, test procedures, operations and maintenance manual, timely information to the drafting section for their preparation of shop drawings and as-built drawings and testing and commissioning.

Requirements

The applicants must possess at least Higher Nitec in Electronic or Electrical Discipline or Mechanical, or Building Automation with 2 years' of site supervision and coordination with owners, main contractors, consultants and subcontractors. Applicants with 2 years of working experience in fire related industry will be an added advantage. A good team player who is able to work independently and communicate at all levels.

Essential Duties and Responsibilities:

• Liaise with internal & external on control design and process flow. Implementation of SCADA/PLC/DCS projects from concept to design, configuration & programming, testing and commissioning for process plants.
• Troubleshoot electrical design and software issues together with assembly/debug team.
• Lead and provide coaching, supervise, make sound decisions and guide to Control Engineer and electrical team.
• Working knowledge of Ethernet, Profinet, ProfibusDP ,Profibus PA, Modbus communication
• Hands on experience but not limit on SIEMENS, OMRON, ALLEN BRADLEY PLC & WINCC HMI or other SCADA systems is essential.
• Oversee the preparation of project documentation for new and refurbish projects.
• Able to carry out testing & commissioning at project site independently locally as well overseas.
• Arrange resources to support project and service team to meet the required timeline
• Occasionally travel local & oversea is required
• Assist and arrange support on IT,OT, IQ,OQ, PQ for new project
• Other duties as assigned by the Management

Education and/or Work Experience Requirements:

• Minimum Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Computer/Telecommunication) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Must have knowledge in computer systems, and high-level knowledge of software applications on PLC’s, vision control system with preferable experience in integrated manufacturing systems
• Must have high level knowledge of Industrial Networks architectures (Ethernet IP, Control Net & Profibus)
• Experience of working on an MES system will be a bonus
• Knowledge of machine control systems
• Good inter personal skills.
• Detail-oriented for understanding complex systems and the ability to pay attention to details, as a minor error can result in major problems.
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Have good knowledge of industry accepted good automated manufacturing practices (GAMP) and validation process (is an advantage)
• Organizational skills for keeping track of project budgets, employees and schedules simultaneously.
• Can speak and write in English

Job Responsibilities

* Inspect project sites and monitor progress, ensuring work done conforms to safety standards and design specifications while determining if changes or adjustments need to be made
* Test materials and soils to determine the strength of concrete, steel, asphalt and foundations of buildings
* Utilize computer assisted design and other drawing tools to plan and design various types of systems and structures, including roadways, buildings, water systems and tunnels
* Direct and participate in surveying activities to lay out installations and establish grades, reference points and elevations to properly guide construction
* Determine design specifications by computing grade and load requirements and material stress factors
* Manage and direct operations, construction and maintenance activities being done at project sites
* Prepare public reports on various topics, including deeds, bid proposals, property descriptions and environmental impact statements
* Ensure activities comply with all environmental, governmental and safety regulations and address all problems concerning actions that do not comply

Job Skills & Qualifications

Reqiured:* Bachelor’s degree in civil engineering or related field
* Excellent problem solving and communication skills
* Experience or coursework in AutoCADPreferred* Previous experience in an engineering field
* OSHA training and certification
* Prior work on geotechnical, waste management or environmental projects

Job scope –

- Provide guidance to process technicians on key parameters, plant operating instructions, equipment preparation for maintenance, process troubleshooting, operating plans, and safety concerns.

- Supports process control and data systems such as distributed control system (DCS) and plant information monitoring system.

- Conduct process evaluations, technical feasibility studies, process trend analysis, and provide technical leadership for the continued operation of the facility.

- Support the Commissioning Team during plant start-up, performance test, optimization and prepare documentation.

- Prepare and review Standard Operating Procedure, PFDs, P&IDs, material, quantity, heat and mass balances, utility and consumable balances, and technical data sheets for major equipment items.

- Provide the required technical support as technical lead in the plant reliability and productivity improvement projects.

- Liaising with the operation team in the control room on a daily basis.

- Ensure safety at the sites through compliance to safe operations and practices at all times.

- Liaise with authorities with regards to all matters with proper documentation.

Requirement

- Minimum Bachelor Degree in chemical engineering or petrochemical engineering.

- 2 years’ working experience in a petrochemical plant or oil refinery is an advantage.

- Strong knowledge of chemical process, and chemical process safety handling.

- Good interpersonal and communication skills, excellent spoken and written skills.

- Exceptional problem solving and analytical skills.

- Basic knowledge of AutoCAD and any other CAD design software is desirable.

- Able to work independently and a multitasker.

• Plan and supervise the team of Technicians in the execution of preventive, corrective maintenance programs within schedule and cost, and in compliance with company's and regulatory standards and requirements, and meeting customer’s expectations.
• Troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure
• Develop Risk Assessment and mitigation measures for every Maintenance job in the plant before executing maintenance activities
• Establish and maintain a proper documentation system to archive all jobs internally and with customers for sharing and audit purposes
• Engage stakeholders to resolve technical problems that arises in the plant.
• Assist the maintenance head to identify, plan & review the training needs of the section
• Assist the maintenance head to review and identify spare requirements classifying under Strategic or Inventory spare
• Assist the maintenance head to develop the section's Maintenance budget
• Timely resolution of technical issues to recover plant and return it to commercial operations.
• Troubleshooting plant/equipment problems
• Scheduling and optimizing manpower both staff and contractors

Qualifications & Experience

• Degree in Electrical Engineering
• Preferably minimum 3 years of experience in relevant Maintenance fields in a Power Plant or Petrochemical Industry
• Safety conscious
• Working Independently
• Ability to work in a team
• Good communication skills
• Basic PC skills like Excel & Words

M&E Site Engineer / Manager – Basic Salary up to $6,000 per month. 5.5 day week. Pandan Road. Full Time - Singaporeans only

This recruitment effort is in collaboration with e2i

Location: Pandan Road (Reporting Location)

· Oversees client & contractor coordination, attending to their needs

· In charge of ensuring that the clients’ specifications are met and make technical drawings

· Develop and prepare designs and drawings from preliminary concepts, sketches and specifications

· Perform design layouts of new or existing space including drawing sketches and incorporate them into CAD file

· Adhere to specific deadlines and deliver high-quality plans

· Work on projects with little to no oversight and review from management

· This position is open for both recent graduates and mid-career individuals (mature and non-mature).

Candidate’s Requirements:

• Minimum NITEC/ Diploma in Electrical, Mechanical, Mechatronics Engineering or its equivalent

• Able to comprehend schematic/Technical drawing

Working Period:

- Monday to Friday - 8am to 5pm

- Saturday – 8am to 12pm

Basic Salary:

Project Engineer - $2,500 to $4,500 per month

Project Manager - $4,500 to $6,000 per month

Contact Grace 87952790

Job Description

• Establish Efficient & Effective process engineering planning (Work Instruction) base on costing estimation request.
• Make/Buy decision for all drawings given by Sales on new order launched.
• Planned and maintaining process routing in ERP system whenever there is new work order launched.
• Coordinate with CNC Programming team on all NPI & FA fabrication.
• Identify opportunities for fabrication process improvement for existing high runner and repeated jobs.
• Supporting in Quality MRB meeting and advice disposition accordingly.
• Prepare PMP /FMEA and work instruction for FA submission.
• Perform new products' manufacturing studies and develop process control specifications.
• Review process specifications to be in line with changes in product specs, process and quality improvement.

Job Requirement

• Min. Diploma/Degree in Mechanical, Engineering related courses or any equivalent.
• Min 2-3 years of metal fabrication or precision engineering experience.
• Detail oriented.
• Good verbal and written communication skills.
• Self-motivated to work independently with team support & minima guidance.
• Ability to maintain a positive attitude at all time.
• Computer knowledge with MS office etc.

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN ELECTRICAL ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

The Aviation Innovation Research (AIR) Lab

The joint CAAS-Thales innovation lab known as ‘AIR Lab’ started to operate on 1st November 2019 with the objective to develop Proof of Concepts (POCs) or Minimum Viable Products (MVPs) of advanced and open technologies for future Air Traffic Management (ATM). Currently, the joint lab employs a team of 40 Thales engineers and 12 CAAS engineers and air traffic controllers operating in a vibrant ecosystem involving a number of Singaporean SMEs and start-ups, as well as key research institutes.

Thales engineers include 10 domain experts – with more than 10 years of experience – coming from Thales ATM centres of competence in France and Australia. These experts are coaching both the local Thales and CAAS engineers. 

The POCs and MVPs are co-developed with the CAAS engineers who have access to the same development tools and environment used by the Thales Engineers (provided by the Singapore branch of Thales Digital Factory). The POCs and MVPs are defined in collaboration with CAAS air traffic controllers through iterative workshops.

AIR Lab research outcomes will feed the next generation of products, including clearly disruptive outcomes addressing Safety and Security for Open architecture, data driven ATM Twin, Green Aviation, Trajectory Based Operations. 

As the AIR Lab was recently extended for another 3 years, 4 work streams are now embarked: 

Regional Experimental Platform, FF-ICE/TBO, Green Aviation, Future-proof Interoperable Platform-Agnostic, Safe and Secure Platforms.

AIR Lab 2.0 continues to benefit from research conducted in Europe through new architecture research which, among other objectives, aims at meeting much stricter safety standards for ground ATM systems in development by the European Aviation Safety Authority (EASA). This breakthrough architecture study is co-funded by the French government (CASSIOPEA).

Regional Experimental Platform (REP) has been initiated in AIR Lab 1.0, and has the view to addressing regional needs in coordination with the SESAR 3 activities conducted in AMS France.

Whom We Are Looking For

As a Software Engineer in AIR Lab, you are seen by the members of your scrum team to be not only a pillar of strength but a source of motivation and inspiration as well. You should be someone who cares about the quality of the technical implementation and delivery as much as you care about the quality of your code. You should be someone who enjoys working in a team of diverse people with multiple ethnic and cultural backgrounds. You should be someone who enjoys diving into the technical details of figuring out a problem and also be able to communicate the solution back to the team so that the members can learn from it. You should be someone who loves learning new technologies and find innovative ways to apply newfound knowledge and be courageous to encourage fellow team members to be like YOU and enjoy participating in all aspects of engineering activities in the AIR Lab.

Responsibilities:

• Understand the functional aspects of the delivery and able to constructively discuss with the Product Owner
• Responsible for the availability or a regular product increment incorporating new features.

• Complete all fundamental tasks for the delivery of new functionality from Application Architecture, Design, Implementation to the tests phase (unit tests, functional tests, and performance tests).
• To implement features by defining test, develop feature and associated automated tests. If appropriate implement security tests and load tests.
• Write and review the necessary technical documentation.
• Decide and implement team level code quality standards.

• Work in an agile, cross-functional multinational team, actively engaging to support the success of the team.

Requirements:

Education

• Bachelors in Computer Science or Information Technology with a minimum of 2 years of working experience.
• Mid-career switchers are encouraged to apply if you demonstrate relevant working experience of a minimum 3 years.

Essential Skills/Experience

• Working knowledge of designing and building software applications using Java and/or Kotlin as a main programming language, between 2 to 3 years; a bonus is if you have experience designing and deploying RESTful APIs (i.e., proxy versus reverse proxy)
• Demonstrated application of Abstract Data Types, Algorithm Complexity Analysis
• Demonstrated application of Software Design Patterns using Java and/or Kotlin (e.g., Builder, Façade, Observer/Strategy)
• Demonstrated application of Advanced Software Design Patterns (e.g., Saga, Event Sourcing), Software Testing (e.g., Unit Testing, Integration Testing)
• Demonstrated application of working with Continuous Integration and/or Continuous Delivery models; you are expected to be familiar with using Linux (e.g., shell commands)
• Good communication skills in English

Desirable Skills/Experience

• Working knowledge of designing and building virtualized & containerized environments (e.g., Kaniko, Docker, Virtual Machine)
• Working knowledge of deploying containers to public clouds (e.g., Azure Cloud, AWS, GCP) and Kubernetes
• Working knowledge of designing and building software applications within Event-Driven Architectures, message broker technology Kafka
• Bonus if you demonstrate a working understanding of designing application with a “shift-left” cybersecurity approach.
• Bonus if you demonstrate knowledge of other languages (e.g., Python, Scala, Go, TypeScript, C, C++, Java)
• Bonus if you demonstrate knowledge of designing software applications that manipulates data (structured, unstructured format) working with Data Lake and/or Lakehouse implementations (e.g., Delta Lake, Databricks, Azure Data Lake)
• Bonus if you demonstrate working knowledge of designing large-scale ETL using frameworks like Apache Flink, Apache Spark and the like.
• Bonus if you demonstrate working knowledge of working with the Elastic Search stack.
• Bonus if you demonstrate previous experience with AI/ML framework.

Essential / Desirable Traits

• Possess learning agility, flexibility and pro-activity
• Comfortable with agile teamwork and customer engagement

YOUR CAREER AT THALES

Future opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your competencies in different areas:

• Room and attention to personal development
• Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution.
• Choose between a technical expertise or a leadership path
• Build an international career within a leading Engineering Group

Job Info:

• Salary: Basic from $3000 - $4000 + AWS +VB
• Working Hour: Monday - Friday (7:50am - 4:55pm)
• Location: Tuas Link (Company transport pick up at designated point island wide)

Job Scope:

• Provide technical support for the production process
• Develop work procedures, implement corrective actions, and preventive measures
• Conduct scheduled preventive maintenance (PM), calibration, and troubleshoot equipment issues promptly to reduce equipment downtime
• Lead process improvement initiatives and analyze defects
• Coordinate with customers to discuss product quality.
• Perform any other assigned ad-hoc duties as needed

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities:

• Gather software requirements and design solutions for modules and small software systems
• Develop and support software including applications, database integration, interfaces and new functionality enhancements.
• Write both internal and external technical documentation
• Deploy, install, and configure hardware and software system

Requirements:

• Bachelor's degree or higher in Computer Science, Engineering, or a related field.
• Proficiency in programming languages such as Python, C++.
• Minimum 2 years of relevant experience
• Experience with wearable IMU sensors and motion capture systems, particularly Xsens DOTs IMU sensors, is preferred.
• Experience with desktop UI development frameworks such as Qt or Electron
• Strong background in software development, including data synchronization, algorithm development and user interface design.
• Knowledge of signal processing techniques, machine learning algorithms, and data analysis methodologies.
• Excellent problem-solving skills and the ability to work independently as well as part of a team.
• Strong communication skills and the ability to effectively collaborate with cross-functional teams.

Project Engineer Responsibilities:

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

• A Bachelor's degree in engineering or a related field.
• A valid engineering license.
• 4 or more years' field and project planning experience.
• Excellent computer literacy and knowledge of design and visualization software.
• The ability to work with multiple discipline projects.
• Excellent project management and supervision skills.
• Excellent organizational, time management, leadership, and decision-making skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practices.

Summary

The incumbent is responsible for retrieve and review all customer specification documents, vendor quotes, drawings and diagrams for creating mechanical designs for customer.

Responsibilities

• Prepare and submit drawings for customer’s review and approval.
• Amend drawing & revise the drawing as per command from production manager or relevant party to meet customer’s requirements.
• Responsible for design control and drawing specification control, liaise with customer for engineering design.
• Prepare bills of quantities according to project requirement for production manager easy to refer.
• Prepare quotation to customer and follow up with customer to make sure we meet customer’s requirements.
• Perform daily review and approval of products release (QA) to check the quality of products.
• Ensure all quality management system documentation are kept in order as per our ISO standards.
• Implement quality control programs as per our ISO standards.
• Mechanical Product includes, Skid platform, Form Hose Reel, Enclosure, Panel, Bicycle Rack, Battery Rack, Construction Structure and etc.

Requirements

• Diploma/Degree in Mechanical Engineering.
• Minimum 2 years of experience.
• Familiar with construction, manufacturing field etc.
• Must have AutoCAD knowledge.
• Good interpersonal skills and able to interface with all levels.

• management of ofice equipment
• maintaining a clean and enjoyable working environment
• managing clerical or other administrative stuff
• organizing, arranging and coordinating daily tasks
• sorting and distributing incoming and outgoing post

Much of the work involves oral and written communication, word processing and dealing with email and telephone enquiries.

Job Info:

• Salary: Basic from $2200 - $2700 + AWS
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Expo MRT

Job Scope:

• Schedule regular internal audits to verify compliance with SOPs, quality policies, procedures, and testing methods
• Collaborate with the incoming material receiving team
• Manage the root cause analysis and corrective action process, working with operations to implement effective and lasting solutions for quality issues
• Monitor the status of internal and external Corrective Action Reports, conducting root cause analyses as needed
• Propose resolutions for unresolved quality issues and oversee their implementation
• Coordinate external audits
• Plan and execute internal audits following established procedures
• Assist the QA Engineer/Executive in preparing ISO documents
• Familiarize the team with new measuring equipment and provide training on usage methods.
• Ensure the calibration of all measuring equipment according to prescribed intervals and standards
• Identify critical inspection points based on customer drawings and product specifications for new projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Info:

• Salary: Basic $2800 - $3500 + AWS + VB
• Working Hour: Monday - Friday (7:50am - 4:55pm)
• Location: Tuas Link MRT (Company transport pvd at designated pick-up point Island wide)

Job Scope:

• Support the Engineer/Supervisor in implementing MBO initiatives to achieve departmental KPI aligned with the Business Plan and Division Objectives
• Collaborate with the Engineer/Supervisor to enhance processes for Yield, Quality, and Productivity, and provide engineering assistance for assigned processes, including support for new product integration and other cross-functional projects
• Execute improvement initiatives, including cost reduction, yield enhancement, and productivity optimization, while also participating in MBO activities
• Assist in troubleshooting and resolving production line issues by collaborating with QA and Production teams
• Collect data and generate technical reports to validate customer product qualifications and ensure process integrity
• Aid Engineers in process development and optimization efforts by conducting DOE and subsequent analysis
• Support prototype initiatives, including the introduction of new products, packages, processes, substrates, or lead frames
• Assist in drafting technical reports for customer product qualification, process assessment, and DOE analyses, ensuring clarity and accuracy in documentation

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147