1) Plan and coordinate, supervise, monitoring of works/ control worker/ allocate work to worker.

2) Coordinate /follow up schedule with Main contractor on our company scope of work eg, metal railing, metal grating , metal catladders/ Architectural works.

2) preparation of safety documents (Risk Assesment forms, MOS,etc)

3) prepared bill of quantities, liaised with fabrication team /coordinates with production to manufacture products on time/oversee for delivery to project site for installation.

4) conduct quality inspection on finished products.

5) Overall control onsite, checking and verifying drawings as per plan to actual/verify work on site as per approved drawing.

6) prepare progress billing report and quantity measurement on site for monthly progress claim purpose.

7) attend site meeting with main contractor / Architect/ consultant.

8) understand revit, BIM , Autocad will be advantage.

9) Able to understanding see drawing/plan/sectional.

10) skilled for able to solve site problem, skilled for can cooridinate with main contractor.

11) Assign work scope by company as and when.

12) Estimator skilled

Responsibilities:-

1. Prepare material requisition lists for job requirements.

2. Plan and design electrical switchboards, consoles and control panels according to customer's requirements and Terasaki standards.

3. Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

4. Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

5. Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

6. Check and follow-up on design and shop drawings with production departments.

7. Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

8. Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

9. Carry out other responsibilities as and when assigned by the superiors.

10. Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System.

1. Prepare submission to client / Authority;

2. Monitor submission approval / necessary follow up;

3. Assist in project coordination & related site work activities;

4. Planning work schedule;

5. Monitor work progress and the quality of work; &

6. Enforce compliance to Authority and Safety & Health requirement;

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Bachelor’s Degree in Chemical and Biomolecular Engineering or equivalent
• Fresh Graduates are welcome to apply
• Team player with strong analytical and communication skills

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

• Monitor the quality of extrusion fabrication outputs and safety of extrusion operations
• Trains and reinforces employees on machine operation, safety and company policies
• Inspect fabrication outputs to check for inconsistencies and deviations from established quality standards
• Maintains fabrication workflow, processes and types of machinery
• Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines
• Ensures that production is being accomplished as per production schedule and specifications
• Monitor team and work procedures to meet production schedules
• Provide direction for project tasks and hold all team members accountable for safety, quality and production
• Conduct daily briefing with the crew to review production goals and performance feedback

Qualifications and Requirements:

• Minimum of 3 years experience as a production engineer in a construction or manufacturing environment
• In-depth knowledge of extrusion procedures, equipment, and WSH guidelines
• Able to read and interpret construction blueprints and shop drawings.
• Problem-solving abilities
• Able to use a variety of material handling and fabrication equipment.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities:

• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals/drawing for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Minimum diploma in Manufacturing / Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate. Autocad is an advantage
• Knowledge in ISO is an advantage.
• Able to start on short notice / immediate.

Responsibilities:

• Prepare & conduct quality inspections, coordinate for non-destructive testing & implement QA/QC management system at site
• Distribute relevant QA/QC documentation to site subcontractors
• Compete site quality control instructions and action remedial responses
• Coordinate with site / client on all quality issues coordinate and attend the QA/QC site weekly meetings
• Consult QAQC Lead on all nonconformance reports and undertake remedial action
• Participate in the quality internal and external audits

Requirement:

• Min. 1 - 3 years of relevant working experience, preferably in QA/QC and commissioning of mechanical systems
• Min. Diploma in Mechanical Engineering or equivalent
• Possess Certified Welding Inspector (CWI)
• Well versed in Universal Standard codes such as ASME / API / AWS / NACE & DSEN

Job Description

• Responsible for analyzing and evaluating current systems and work processes
• Identifies areas for improvement and develop innovative solutions to improve operations efficiency, productivity and cost savings
• Documents processes, procedures and work instructions
• Responsible for downstream production and resources planning
• Prepare monthly reports for management meeting
• Perform other work related tasks as and when assigned

Requirement

• Bachelor’s degree in Industrial Engineering, or related discipline and/or equivalent experience
• Preferably 5 years of related work experiences
• Good analytical and presentation skills
• Excellent written and verbal communication skill
• Ability to solve problems and address root causes
• Committed, good team player with strong interpersonal skills and multi-tasking capability
• Ability to be self-motivated and work effectively with minimal supervision

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Job Description & Requirements

1. Ensure that the Inspection department approves fittings, ducts, water pipes, and other accessories before the installation begins.
2. Deliver all tools required for the fitting including power tools, hand tools, scaffolding, and ladder on time and in the exact numbers as mentioned in the list.
3. Prepare, apply, and get approval for the HVAC shop drawings, work method statement, MEP-coordination drawing, and project specification from the head engineer.
4. Coordinate installation schedule with team members and other departments working on the project.
5. Monitor site activities and make sure all rules and regulations are followed. Making reports on daily progress made at work and ensuring it reaches the superiors.
6. Ensure safe construction of heating, ventilation, and air conditioning maintenance according to rules and regulations set by the safety policy manual by the company. They will have to ensure the protection and safety equipment is 100 per cent tried and tested for safe use.
7. Arrange labor and other professionals including pipe fitter, duct fitter and assistant duct fitter. They also act as a supervisor for the installation and maintenance project.
8. Additional responsibilities include having to arrange for the safety gear and equipment they need to do their work.
9. Documentation of the Conduct Testing inspection process for a variety of tasks including the light test for ducts, underground chilled water piping system, and hydro test.
10. Attending weekly and monthly meetings held by the project manager and QC supervisor to talk about the project updates and completion.
11. Assisting the commission team during the testing, balancing, and adjusting phases of air and hydronic fitting.

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• Minimum 5 years of engineering experience with recognized Degree in relevant field, and at least 3 years of supervision experience of E&M work in construction site for projects of similar and complexity.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills