Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Develop front-end web applications to support robotics software solutions and platforms. Candidate should be well-versed in web development skillsets, software development life cycle and systems engineering concepts.

Responsibilities:

• Drive independent application oriented robotic research towards industrial automation using ROS
• Develop software solutions for interoperable multi-agent systems project implementation
• Implement systems engineering approach by translating business requirements into system requirements and validation methodologies
• Develop software testing and validation strategies in accordance with industry standards
• Technical project planning and execution on development projects for global industry members
• Technical write up and presentation of project work

Job Requirements:

• Minimum diploma holder
• Minimum 0-3 years of front-end development experience
• Proficiency in Wireframing tools, such as Figma, Sketch or Adobe-XD
• React, Typescript HTML5, CSS3 and javascript
• State management libraries (e.g., Redux, Mobx)
• Version control systems (e.g., Git)
• Front-end testing frameworks (e.g., Jest, Enzyme)
• Containerization technologies (e.g., Docker, Kubernetes)
• Understanding of software development lifecycle and agile methodologies.
• Other requirements (e.g. skills, competencies): Experience in ROS and robotics is an added advantage

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Develop front-end web applications to support robotics software solutions and platforms. Candidate should be well-versed in web development skillsets, software development life cycle and systems engineering concepts.

Responsibilities:

• Drive independent application oriented robotic research towards industrial automation using ROS
• Develop software solutions for interoperable multi-agent systems project implementation
• Implement systems engineering approach by translating business requirements into system requirements and validation methodologies
• Develop software testing and validation strategies in accordance with industry standards
• Technical project planning and execution on development projects for global industry members
• Technical write up and presentation of project work

Job Requirements:

• Minimum diploma holder
• Minimum 3 years of front-end development experience
• Proficiency in Wireframing tools, such as Figma, Sketch or Adobe-XD
• React, Typescript HTML5, CSS3 and javascript
• State management libraries (e.g., Redux, Mobx)
• Version control systems (e.g., Git)
• Front-end testing frameworks (e.g., Jest, Enzyme)
• Containerization technologies (e.g., Docker, Kubernetes)
• Understanding of software development lifecycle and agile methodologies.
• Other requirements (e.g. skills, competencies): Experience in ROS and robotics is an added advantage

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As a Data Engineer specializing in Data Mapping & ETL, you will play a crucial role in designing and implementing data solutions that ensure efficient and accurate data movement across systems. Your responsibilities will include:

• Developing and maintaining ETL processes for data extraction, transformation, and loading.
• Conducting data mapping to transform data across multiple systems and formats.
• Collaborating with data architects and other stakeholders to understand data requirements.
• Optimizing ETL processes for performance and reliability.
• Conducting data quality assessments and implementing data validation techniques.
• Documenting ETL processes and best practices for future reference.

This role will require a blend of technical expertise and analytical skills to manage complex data flows effectively.

To be successful in this role, you should meet the following requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• 4+ years of experience in ETL development and data mapping.
• Strong proficiency in SQL and experience with databases such as Oracle, Postgres, or SQL Server.
• Experience with ETL tools such as Apache NiFi, Talend, or AWS Glue.
• Familiarity with data warehousing concepts and dimensional modeling.
• Knowledge of data quality frameworks and data governance principles.
• Proficient in scripting languages like Python or Shell.
• Ability to work in an Agile environment and collaborate with cross-functional teams.
• Preferred : Immediate joiner or max 1 Month

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Responsibilities:

• Conduct routine inspections and preventive maintenance on tipper trucks to ensure proper functioning.
• Diagnose mechanical, hydraulic, and electrical issues in tipper trucks and execute necessary repairs.
• Perform engine repairs, brake system fixes, electrical wiring work, and other mechanical repairs.
• Use diagnostic equipment to identify issues related to engine performance, fuel systems, transmission, etc.
• Analyze and resolve breakdowns in a timely manner to minimize truck downtime.
• Develop and implement troubleshooting solutions to address both common and complex technical problems.

Qualifications:

• Diploma or Degree in Automotive Engineering, Mechanical Engineering, or a related technical field.
• Minimum of 3-5 years of experience working as a technician or engineer, preferably with heavy vehicles such as tipper trucks.
• In-depth knowledge of heavy vehicle systems, including engines, transmissions, hydraulics, and electronics.
• Strong mechanical and technical troubleshooting skills.
• Ability to read and interpret technical diagrams, schematics, and manuals.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Responsibility

• Regular visits to customers to be informed of sales opportunities, to increase our sales to them and obtain a good margin by good customer service.
• Monitor all sales closely and be aware of the competitors’ actions.
• Work closely with Principals and keep them updated.
• Regularly find new customers through conversion and prospecting.
• Put in effort to promote new products that the department takes on from time to time.
• Maintain pressure on customers to pay up promptly.
• Monitor stock levels and carry out programs to draw down aging stocks.
• Provide important feedback on customers, major projects in the market, competitor products and prices.

Job Requirement

• At least technical diploma/degree in Engineering or its equivalent.
• At least 2 years of industrial/engineering sales experience.
• Added advantage of 2 years of relevant experience in selling mechanical pumps.
• Ability to discuss highly technical concepts with prospective leads.
• Strong verbal, written, and interpersonal skills

Responsibilities:

• Contribute to the design of engineering solutions and processes; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions
• Develop feasibility study report for projects
• Prepare conceptual design and basic process calculation and equipment rating
• Develop, configure and optimize processes, sizing & selection of equipment’s etc. for Tender from inception through to start up
• Introduce new product technology that will increase safety, reliability and cost effectiveness
• Facilitate in Hazop Study for all projects and modification
• Ensure process engineering and design execution follow Vopak Standards, Specification, Work Procedure
• Determine customer’s requirements and technical specifications
• Prepare enquiry, tender document, technical evaluation & clarifications, and recommendations
• Assist commercial and business development team in developing the business and financial model of new business opportunities
• Work with Engineering team on budgetary cost for projects and existing terminals revamp or expansion
• Prepare specifications and estimate costs for the proposed new, modifications, expansions projects
• Produce basic conceptual design of storage, pumping and loading/unloading operation
• Review of vendor’s documents, drawings, datasheets, specifications and calculations
• Prepare & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, technical bid analysis etc
• Prepare various engineering deliverables (Drawings & documents) such as process flow diagrams, P & I Diagrams, process datasheets, equipment specifications, cause & effect diagrams, control philosophies, shutdown philosophies, HAZOP studies & reports, operation & maintenance manuals etc. and providing necessary engineering inputs to other departments
• Work with respective parties on these reporting and documentation
• Provide process and operational training to terminal operator for new terminal operation
• Plan and participate in pre commissioning of new facility operations
• Involve in the PSSR and start-up of the new operations
• Effective interface between the customer and Vopak from an operational/technical point of view before and during the project
• Provide the necessary technical support for terminal O&M procurement, construction as required

Requirements:

• Degree in Chemical Engineering (Chemical Process).
• Preferable to have experience in Terminal Operations or Chemicals plants or Oil & Gas industry
• Minimum 8 years of relevant experience
• Project proficiency with Engineering and Operational background and experience in managing tank farm and similar projects
• Project management skills
• Knowledge of technical functional areas for better coordination and timely decision making

• Ensure correctness of build-up according to construction plans and drawing.

• To coordinate with engineering team to prepare engineering drawings and sketches.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations in order to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plan as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Supervising work for the safety and the efficiency of production on technical progress at site

• Advice and propose based on - Mixing plant construction, Windproof and sandproof construction, Construction of steel cofferdam in water, Underwater mass concrete cracking prevention construction, Underwater rock-socketed pile construction

Job Requirements:

• Degree in Construction Field Engineering.

• Ability to clearly particulate expectations

• Working knowledge of STAR*NET software.

• Proficient in AutoCAD, Revit & Civil 3D BIM application.

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and shop drawings.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Cofferdam Construction, Underwater Concrete Construction.

Job Description :

• Read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Manage a team of Superintendents, Supervisors, including work schedules, project progress and resource allocation.
• Manage & chair day to day VSCC (Vessel Safety Coordination Committee Meetings).
• Assist in providing cost estimates for labour, supplies, materials and other project costs.
• Collaborate with clients, Project Managers, other construction management to determine budget and timeline.
• Coordinate materials and equipment delivery with vendors and suppliers.
• Create schedules for workers and subcontractors.
• Work closely with commercial team and forecast Subcontractor’s requirements and assign scopes accordingly.
• Maintain a daily log for the job site’s operations, reporting to management as necessary.
• Make changes in the operation as necessary to best met construction deadlines.
• Implement management techniques that are cost-effective and efficient.
• Prepare day to day reports & update project master schedule.
• Conduct weekly internal production meetings & Weekly client – shipyard interphase meeting.
• Prepare meeting minutes and disseminate every week to all personals related to the assigned project.
• Maintain project variation order records, technical query records, Drawing transmittal records and disseminate weekly.

Job Specification :

• Bachelor’s / diploma in Mechanical or equivalent
• Minimum 5 years of working experience in Rig Construction & Shipyard experience
• Must possess MWSHSSR (Manage Workplace Safety and Health Ship building and Ship Repair)
• Must possess experience of working & managing Jack up rig upgradation / repair assignments in shipyard environment
• Excellent English command, including writing, speaking and active listening
• Proficient in MS Office applications (ie. Microsoft Excel)
• Knowledge of construction budgeting best practices and assist commercial team in preparing quotes.
• Good planning skills, including execution, resource allocation and manage contingencies
• Understanding of construction equipment, including safe operating practices and signs of maintenance issues
• In-depth understanding of MOM construction regulations
• Great problem-solving and decision-making skills
• Effective leadership abilities, motivate peers, set targets / goals and conflict management
• Organizational skills, including time management, delegation, prioritization and multitasking
• Willing to work in a challenging repair environment

Job Description & Requirements

-Performs any other duties as directed by the Manager.

-Perform other administrative duties as assigned

-Organizing workflow and ensuring that employees understand duties or delegated tasks.

-Maintain consistent high quality of work performance.

-Complete operations by developing schedules, assigning, and work gathering resources.

Requirements

- Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma/Degree in any field.

- Preferably with at least 3years and above of a working experience

- 6 days work week

- Able to work in a fast-paced environment & work independently

- Working location: Pioneer

In this role, you will have the unique opportunity to engage in Mechanical Design, using Solidworks and AutoCad.

We're looking for motivated engineers willing to work in a quality driven environment with a keen sense of product development to produce technologically superior products. One thing is for sure, you will be working closely with an experienced team, that will always make you feel that you a part of a dynamic organization.

Responsibilities

• Mechanical Design

• New project development, involving in conceptual design proposal, design and compilation of project budget.

• Responsible for meeting product quality standards and delivery target.

Requirements

• Degree/Diploma in Mechanical/Mechatronics/Precision Engineering

• Interest in Industrial Automation field

• Knowledge of Solidworks/Pro E or other 3D CAD software

• Preferably at least 2 years of relevant experience in Industrial Automation projects

Job Description & Requirements

• Preparing and developing technical presentations to explain our company's products or services to customers.
• Discussing our products specifications with customers.
• Collaborating with project department to understand customer requirements and provide sales support.
• Prepare costing and quotations for management’s approval and submit to customers. Follow up with customers to secure orders.
• Coordinate projects until successful delivery
• Preparation of hardware schedule for submission and approval.
• Prepare, submit and follow up on all the progress claims for payments to the customers.
• Prepare and negotiate final accounts with customers.

• Requirements :
• Diploma or Bachelor's degree in engineering related field.
• Experience in the sales of building and architectural products or materials in construction industry.
• Strong communication, interpersonal, customer service, and sales skills.
• The ability to relate technical information to non-technical customers.
• Excellent technical and problem-solving skills.
• Good leadership and team working skills.

Summary of Position

• This role will support our Tuas Mill in the areas of facility management which includes both hard and soft services
• The individual will support to manage the Utilities operation and management, soft services like canteen, pest control, employee transportation, landscape, and waste management and any other services as and required based on business requirements
• The individual is expected to act as a self-driven, motivated, good communication, analytical and leadership skills

KEY ACCOUNTABILITIES:

General:

• Assure compliance with KC site Environment, Health, and Safety Management System (EHSMS) and Quality Management System (QMS) requirements, policies, and procedures
• Provide leadership and direction in the operations and maintenance of utilities equipment’s, building services, and facility soft services
• Training, mentoring, and coaching of direct report and improve their skills, knowledge, and performance
• Improve facility level energy usage and optimization, water conservation and recycling
• Identify reliable, cost-effective service providers with buyers and qualify them as per the established guideline by KC

Hard services (80%):

• Manage and lead critical utilities asset performance by implementing sound systems and practices for reliable operations.
• Communicate and follow up effectively with cross functional teams for the effective and optimized performance of the asset.
• Drive and lead short- and long-term action plans to improve asset performance.
• Asset life cycle analysis and develop roadmap for replacement due to ageing, obsolescence and frequent breakdown which increase maintenance cost.
• Prepare and review both Capex and Opex facility budget with mill leadership.
• Establish and promote good quality awareness and compliance to the set plan among the team.
• Set, discuss, review, and communicate yearly objectives with team members.
• Skill gap analysis for team members and close gaps by training, on job and cross functional training
• Develop master PM for all the facility system and compliance to completion
• Plan, organise and control all the activities of preventive maintenance. Adjust maintenance schedule to maximise productivity. Implement the most cost-effective maintenance options. Establish database to monitor PM issues/items. Provide solutions and coordination with the help of external or internal resource on maintenance related issues.
• To collect technical information, manuals, and drawings relative to machine for maintenance and reference. To draw up the Maintenance related SOP/manuals for implementation/compliance. To draw up and ensure implement safe working practices and procedures. Problem solving on maintenance related issues.
• Provide support to the engineering projects.
• Support quality, safety fire and any other audits with cross functional teams as and when required
• Coordinate activities to drive problem-solving capability, by leveraging industry tools, digital solutions, and methodologies, and collaborate with regional Engineering teams to enhance technical capabilities
• Facilitate initiatives to drive mill Cost saving programs on indirect cost

Soft Services (20%):

• Set and monitor the service provider performance based on the agreed SLA’s
• As part of continuous improvement, drive operational and cost efficiencies by monitoring the service usage and optimize together with service providers
• You will be responsible for the following soft services
• Employee transport
• Employee canteen
• Vending machines and pantry
• Janitorial services
• Ground and landscaping
• Pest control
• Laundry services
• Waste management (Both hazardous and non-hazardous) and plant recycling program

CORE ROLE COMPETENCIES:

• Attention to detail, rigor.
• Leaderships skills related to taking accountability and lead by example.
• Digital skills and analytical knowledge.
• Collaboration and relationship-building skills with cross functional teams.
• Ability to collaborate with various groups of people and stakeholders in a matrix organization and cross function.

QUALIFICATIONS

• Bachelor’s degree/Diploma in electrical/mechanical engineering.
• At least 5 years of experience in facility management includes managing critical utility services in industrial environment preferably in high-speed manufacturing and related soft services.
• Knowledge in building automation system
• Candidate holding registered Fire Safety Manager, Singapore certified energy manager have an added advantage.

Responsible for daily implementation and enforcement of the quality assurance program and functions for defined work or projects including supervising and ensuring proper documentation as well as enforcing company, customer, quality standard, industries standard, legal regulation, specification, directives, policies and guidelines meeting company quality objectives.

Job Description:

• Operations and Maintenance Regime (Preventive and Corrective Maintenance)
• Daily and Weekly Work Planning and Duty Roster
• Manage day-to-day functions of facility technicians and gather feedback and observations from routine inspections
• Guide and monitor Facility Technicians whenever help is needed to resolve facility / building issues while ensuring Workplace Safety
• Prepare the maintenance schedule and arrange contractors for servicing
• To ensure all preventive, corrective maintenance and ad-hoc works are duly carried out to ensure facilities and Fire Safety Equipment are in good working conditions
• To maintain and schedule the periodic maintenance and servicing Plants compressors, pumps and all equipment.
• To maintain Chiller plants and monitor the plant efficiency. Including Cooling Tower, Condenser pump and AHUs.
• Hands on Electrical, Mechanical, Sanitary and Plumbing works as needed to support Technicians
• Support Emergency Response Plan
• Coordinate with Safety/Security Team and landlord to verify Building/Fire Alarms and record events.

Job Requirements:

• Diploma in Electrical and Electronics Engineering or equivalent
• Minimum 5 years’ of maintenance and facilties working experience in marine shipyard industry
• Good in prepareing operation reporting
• Posses good communication skills and be able to relate different levels of people
• Have a good safety mindset and displays good WSH behaviour

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Responsibilities

• Responsible for sales of products/services, achieving sales target & ensure sustainable order growth
• Manage and increase business with existing customers by identifying their current and future service requirements to provide solution, maintaining relationships
• Identify & establish new business opportunities / market potential customers
• Prepare and deliver presentations on products and service.
• Contribute to team effort and be accountable for sales growth objectives
• Performing regular status updates and proposes recovery plan(s), in case of any shortfalls
• Build and maintain strong relationship with customers
• Monitor payment and control collection
• Correspond with suppliers and customers to ensure prompt delivery;

Requirements

• Only Singaporean
• Diploma / Degree in Electrical/ Mechatronic Engineering or equivalent is highly preferred
• Ideally with some sales experience
• Possess own transport and class 3 driving license
• Good interpersonal and communication skills
• Pro-active, highly motivated, and driven personality
• Experience in Electric Motors / Drives is an added advantage