Position Summary

Responsible for new product introduction Production Tooling Development, and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems. Develops and sustains process improvements to reduce production costs and increase yields.

Position Responsibilities:

• Support and drive production tooling development activities during NPI and sustaining phases.
• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Establish and maintain databases of Production Tooling.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Applies basic problem-solving techniques to define and resolve routine issues.
• Determines a course of action based on guidelines.
• Works on assignments of limited scope where answers can be readily obtained and problem solving requires following standard practices/procedures.
• Develops working relationships internally.
• Exchanges standard/basic information with colleagues, immediate supervisor, project leaders and other professionals in the team/group.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements (Experience/Education/Skills):

• Bachelor’s Degree or Masters in Mechanical or Electro-Mechanical Engineering

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 2 years of related experience with a Bachelor’s Degree; or 1 year and a Masters degree; or a PhD without experience; or equivalent work experience.
• 2+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in enclosure and chassis, structure, mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively work together as a team, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

Responsibilities:

• Lead the design and implementation of complex IT infrastructure projects, ensuring alignment with business objectives and government policies.
• Manage relationships with stakeholders and service providers, ensuring the infrastructure meets business and operational requirements.
• Oversee all aspects of infrastructure projects, from requirements gathering to implementation and ongoing support.
• Ensure application infrastructure services meet confidentiality, availability, and data integrity requirements.
• Manage multiple projects simultaneously, ensuring timely delivery within budget and scope.
• Lead collaboration efforts between government agencies and central services teams to ensure seamless service delivery.
• Drive continuous improvement in service quality and operational efficiency.

Experience and Skills Needed:

• Degree or Diploma in IT, Computer Science, or related disciplines.
• At least 5 years of experience in IT infrastructure, with hands-on experience in 3 full project development life cycles.
• Ability to manage large, complex projects and lead teams effectively.
• Strong strategic and business acumen, with the ability to engage and influence senior stakeholders.
• Proven experience in budgeting, forecasting, and financial management for IT projects.
• Strong leadership, communication, and organizational skills.
• ITIL v3 Foundation certification (preferred).

Responsibilities:

• Test Strategy Development:Assist Product Owner and Business Analyst in crafting user story acceptance criteria.
  Analyze and decompose complex software systems, designing a comprehensive test strategy.
  Research emerging technologies to develop innovative test automation frameworks.
  
• Test Execution & Automation:Develop test suites, scenarios, and cases to ensure robust quality assurance.
  Take a risk-based approach to test automation, ensuring optimal coverage.
  Conduct time-boxed exploratory testing to identify potential issues.
  Maintain regression test suites in the nightly QA build and continuously refine the smoke test suite in the Development CI environment.
  
• Collaboration & Testing Leadership:Lead system integration testing in collaboration with other system owners.
  Manage user acceptance testing (UAT), ensuring all testing requirements are met.
  Oversee the defect lifecycle and manage test artifacts and repositories.
  
• Continuous Improvement:Drive continuous improvement in agile testing practices and tools.
  Take on secondary roles such as Application Performance Engineer or Application Security Engineer, as needed.
  

Experience and Skills Needed:

• Minimum of 3 years of experience in exploratory testing and regression test automation.
• Strong analytical skills with a focus on detail.
• Excellent interpersonal skills, including tactfulness and effective communication.
• Experience working in an Agile development environment is an advantage.
• Familiarity with test automation tools such as Robot Framework, SikuliX, Selenium, Playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC, and Sprinter), or EggPlant is a plus.
• Certifications such as Certified Software Testing Professional (CSTP) or Certified Software Quality Analyst (CSQA) are highly beneficial.
• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Roles & Responsibilities

The Senior Quantity Surveyor is responsible for all cost and contractual issues on Main contract as well as Sub-contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Preparation of Monthly Progress claims, variation orders and payments to subcontractors
• Involve in managing and reporting of project budget & cost control
• Responsible in Pre & Post-Contracts administration for both the Main Contract and Subcontracts.
• Monitor all financial aspects of the projects to ensure projects run according to budget
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment
• Be familiar with various stages of projects so as to source for the most viable yet reasonable priced materials.
• Able to share new perspectives on cost, orders and claims.
• With the understanding of the contractual legal rights, he/ she will be involved in advising the management on their position of the contract from the tender stage

Skills and Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 10 years working experience in SINGAPORE tendering, estimating and measurement of quantities on buildings projects worth at least $100 million.
• Good analytical skills
• Candidates with knowledge in Singapore Institute of Architects (SIA) Conditions of Contract, REDAS, FIDIC, FIDIC Short Form of Contracts will be an added advantage

Email resume to [email protected]

The Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

Key Responsibilities:

• Develop, execute, and document testing protocols for semiconductor manufacturing equipment, ensuring compliance with industry standards and internal quality benchmarks.
• Leverage your knowledge of backend semiconductor manufacturing processes to inform testing methodologies and validate equipment performance in real-world scenarios.
• Work closely with R&D engineers, product managers, and other stakeholders to define testing requirements, analyze data, and recommend improvements.
• Utilize statistical analysis and data interpretation skills to assess equipment performance and reliability, presenting findings to engineering and management teams.
• Ientify and troubleshoot issues in equipment functionality and performance, providing actionable feedback to the engineering team for design improvements.
• Maintain thorough documentation of testing procedures, results, and equipment specifications to ensure knowledge transfer and regulatory compliance.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field;
• 5 years of experience in semiconductor manufacturing, specifically in backend processes.
• Strong understanding of semiconductor testing methodologies and validation processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams.
• Familiarity with industry standards and regulatory requirements related to semiconductor manufacturing.
• Experience with design of experiments (DOE) and statistical process control (SPC).
• Knowledge of semiconductor manufacturing equipment and processes (e.g., packaging, assembly, testing).
• Previous experience in an R&D environment is advantageous.

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

1. Client Consultation:Engage with marine industry clients to understand their technical needs.
   Recommend solutions, such as marine engines, navigation systems, propulsion systems, or safety equipment.
   
2. Technical Presentations:Conduct demonstrations or presentations to showcase the technical aspects and benefits of marine products or services.
   
3. Sales and Business Development:Identify and pursue new sales opportunities within the marine sector, including shipyards, fleet operators, and marine contractors.
   Develop and maintain strong relationships with existing clients to encourage repeat business.
   
4. Proposal Development:Prepare technical bids, proposals, and quotations tailored to the marine industry.
   
5. Market Research:Stay updated on industry trends, including emerging marine technologies, regulations, and competitor offerings.
   
6. Technical Support:Provide pre-sales and post-sales technical assistance, troubleshooting, and guidance to clients.
   
7. Collaboration:Work closely with the engineering and production teams to ensure the feasibility and customization of solutions.
   Coordinate with after-sales service teams to ensure client satisfaction.
   
8. Regulatory Compliance:Ensure that proposed solutions comply with international maritime regulations, such as IMO (International Maritime Organization) standards.
   

Preferred Experience:

• Experience in the marine industry or related sectors such as offshore, shipbuilding, or marine services.
• Knowledge of specific marine equipment (e.g., propulsion systems, navigation equipment, or ballast water treatment systems).

Required Skills and Qualifications:

• Educational Background:Bachelor's degree
  
• Technical Knowledge:In-depth understanding of marine systems, equipment, and technologies.
  Familiarity with international maritime regulations and standards.
  
• Sales Expertise:Proven ability in B2B sales, negotiation, and closing deals within the marine sector.
  
• Communication Skills:Ability to explain complex marine technical concepts to both technical and non-technical stakeholders.
  
• Problem-Solving Skills:Strong analytical abilities to assess client challenges and provide innovative solutions.
  
• Teamwork and Collaboration:Ability to work with diverse teams, including engineering, operations, and after-sales service teams.
  

Responsibilities:

• Lead the monitoring, analysis, and continuous improvement of the product runtime environment across all stages.
• Collaborate with cross-functional teams (developers, product managers, user support) to identify and rectify performance issues proactively.
• Oversee the implementation and management of incident and change management workflows, ensuring they align with best practices and business requirements.
• Provide strategic direction in developing and refining operations, processes, and preventive measures for system reliability.
• Manage the operations team, ensuring high availability and top-tier support service delivery on a 24/7 basis.
• Drive improvements in automation and monitoring to minimize downtime and enhance system performance.
• Prepare and deliver presentations and reports to higher management, detailing operational activities, improvement efforts, and results.
• Mentor junior engineers and guide them in adopting best practices for monitoring, incident management, and process improvement.

Experience and Skills Needed:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• At least 4-5 years of experience in an Operations Engineer role, with significant exposure to cloud infrastructure, monitoring, and incident management.
• Extensive experience with full-stack monitoring, cloud-based monitoring tools, and ITSM tools for incident and change management.
• Proficiency in scripting tools (e.g., Terraform, Ansible) and process automation to minimize errors and downtime.
• Strong leadership and mentoring skills, with the ability to influence and motivate the team.
• Excellent problem-solving and communication skills, capable of translating complex technical issues for non-technical audiences.
• Certification in cloud platforms (AWS, Azure, Google Cloud) is highly preferred.

Job Title: Software Quality Engineer - Senior Consultant

Salary: $9,800.00

Responsibilities:

• Lead large-scale and complex testing efforts, ensuring that software products meet the highest quality standards.
• Own the test strategy, test execution, and test automation for critical software projects.
• Drive the adoption of best practices for testing and automation across the organization.
• Lead and mentor a team of testers, fostering collaboration and ensuring knowledge sharing.
• Provide expertise in areas such as application performance and security testing.
• Take ownership of the test automation framework and continuously improve it based on feedback and emerging trends.

Experience and Skills Needed:

• More than 6 years of experience in software testing, including a deep focus on exploratory testing and automation.
• Strong leadership skills and the ability to drive test strategies and innovations across teams.
• Advanced knowledge of Agile testing practices and tools.
• Extensive experience with a variety of testing tools and frameworks, including those mentioned above.
• Ability to drive continuous improvement initiatives in testing processes and tools.

Job Summary

An excellent opportunity to join as a Salesforce Technical Engineer cum Consultant. You will be part of the Information Technology (IT) Digital team, driving technical excellence to create dynamic and scalable Salesforce solutions.

Mandatory Skill-set

• Degree in Computer Science, Information Technology, Engineering;
• Minimum of 5 years of Salesforce development experience, especially with Service Cloud;
• Good understanding of SFDC fundamental concepts (application, data and security), CRM domain knowledge (Sales Cloud, Service Cloud and Marketing Cloud) and Salesforce Lightning framework;
• Strong technical foundation in integration components for SFDC, SFDC APIs (SOAP, REST, BULK APIs), Apex controllers, Apex Web Services, Visualforce, Apex callout, inbound & outbound messaging, SFDC data loaders, middleware;
• Hands-on configuration experience in administration setup, such as managing organisation, users, profiles, roles, security controls, data & support processes configuration;
• Experience in report & dashboard configuration;
• Strong analytical and problem solving skills; experience in both process and solution analysis;
• Strong interpersonal skills, results oriented and ability to work independently and effectively in a global team environment;
• Ability to multitask effectively and deliver working solutions on a tight schedule and fast-paced environment;
• Strong oral and written communication skills.

Desired Skill-set

• Salesforce Certification;
• Service Cloud Consultant certification;
• Experience with OmniStudio & Omniscript will be a bonus.

Responsibilities

• Responsible for development, testing , implementation and documentation of Salesforce application;
• Design custom objects, custom fields, picklists, page layout, workflow, approval processes, validation rules & flow;
• Handle change request and implement enhancements using Salesforce frameworks and Apex;
• Conduct analysis and configuration of Salesforce, implement, and test the platform-specific solutions, and/or other related packages and add-ons;
• Develop and maintain integrations between SFDC and 3rd party services (eg. APIs, middleware);
• Migrating/Deploying codes and SFDC components using out of the box and/or other deployment tools;
• Document faults, implement resolution & retests, to agreed standards;
• Able to adapt to the fast-changing environment and ambiguous situation;
• Identify areas of improvement and develop mitigation plans.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Responsibilities:

Plan, design and administer contract/project of mechanical and electrical engineering works for building service including

• Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Minimum 3 years of relevant experience. Fresh Graduates are welcomed.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Description:

• Seeking an experienced and passionate Integrated Sensing and Communication Algorithm Engineer to research and develop next-generation integrated sensing and communication technologies, driving the development of intelligent driving and intelligent cabin systems.
• This position will focus on the design and optimization of sensing algorithms, addressing technical challenges in the field of wireless sensing
• Design, optimize, and implement algorithms related to integrated sensing and communication, enhancing the performance of communication systems and sensing capabilities.
• Conduct research on joint optimization of communication and sensing, developing efficient resource allocation and channel scheduling algorithms.
• Validate and improve data processing, signal processing, and sensing algorithms based on real-world applications.
• Collaborate closely with RF and system engineers to ensure successful implementation and optimization of algorithms in actual products.
• Stay updated on the latest advancements in the field of integrated sensing and communication, fostering continuous innovation and driving breakthroughs in technology.

Job Requirements:

• Master’s degree or above in Communication Engineering, Electronics, Computer Science, Automation, or related fields with 5 years' experience.
• Familiar with wireless communication and signal processing theories, and a solid foundation in sensing technologies (e.g., radar, optical sensing, etc.).
• Prior experience in integrated sensing and communication or joint optimization algorithm design is preferred.
• Experience with wireless communication standards like 5G, LTE, Wi-Fi, or V2X technologies.
• Familiar with applying machine learning or deep learning in sensing and communication.
• Strong signal processing skills and mathematical foundation, especially in areas such as optimization theory, probability, and statistics.
• Proficient in programming languages such as C/C++, Python, or Matlab, with algorithm development and simulation skills.
• Excellent teamwork and communication skills, with the ability to independently solve problems and think innovatively.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: R&D Electrical Engineer
• Working Location: Central
• Working Hours: Monday to Friday (8.45 AM – 5.30 PM)
• Salary Package: Basic Salary up to $3,800 + AWS + Bonus + Transport Allowance + Flexible Benefits
• Duration: Contract (3 years – Renewable)

Key Responsibilities

• Use 3D CAD design tools and perform high-precision 3D printing (FDM & DLP).
• Build simple circuit boards for sensor control and data acquisition using basic microcontroller boards like Arduino, ESP32, or STM32.
• Test and assemble electronic and mechanical parts, and debug software using basic tools like Python or C++.
• Maintain laboratory inventory and handle laboratory administrative tasks (procurement, equipment maintenance/repairs, and safety matters).
• Perform administrative tasks, such as ordering and payment using the SAP system.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering, Mechanical Engineering, Bioengineering, or relevant discipline
• Basic experience in 3D CAD design software, like Solidworks and Fusion360
• Has experience with microcontroller boards like Arduino, Esp32, STM32
• Basic experience in handling simple electronics and basic hands-on soldering skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68612 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Your Impact

Site Reliability Engineering (SRE) is an engineering discipline that combines software and systems engineering to build and run large-scale, massively distributed, fault-tolerant systems. At Goldman Sachs, SRE is responsible for improving the availability and reliability of some of the firm’s most critical platform services, and ensures they meet the requirements of our internal and external users. We are looking for engineers who are motivated to collaborate with our businesses to build and run sustainable production systems, which can evolve and adapt to changes in our fast-paced, global business environment.

The SRE team develops and maintains platforms and tools which help other engineering teams in Goldman Sachs to build and operate reliable and resilient systems. The platforms we offer range from central logging and tracing to monitoring and alerting and we provide tools to drive adoption and improvements to capacity planning, operational readiness assessments, production incident postmortems, SLIs / SLOs, and deployment automation including canary releases.

The products and services we provide to our internal customers are used by thousands of engineers every day. We believe that reliability is the most important feature of any system, and we are devoted to giving our engineers the platforms and tools they need to build and operate reliable products.

How You Will Fulfil Your Potential

As a developer in the SRE team, you will work with internal customers, product owners, and SREs to design, develop, and support the platforms and tools we provide to other engineering teams to enable them to run reliable large scale production systems spanning cloud and on-prem datacenters.

Responsibilities

• Design, develop, and support SRE platforms and tools
• Create and support automation solutions and build out monitoring and alerting to improve the reliability of the platforms and tools we operate
• Collaborate with other teams to onboard them onto SRE owned platforms and tools and help them implement SRE best practices
• Adhere to and drive SRE disciplines and processes across the global team

Basic Qualifications

• Degree in computer science or engineering with at least 3 years industry experience
• Proficiency in at least one major programming language, preferably in Java or Go and JavaScript / Typescript
• Excellent programming skills including debugging, testing, and optimizing code
• Strong problem solving / analytical skills
• Experience with algorithms, data structures as well as software and system design
• Experience automating operational tasks
• Comfortable with technical ownership, managing multiple stakeholders, and working as part of a global team

Preferred Experience

• Experience with distributed systems design, maintenance, and troubleshooting
• Experience with databases / data stores like PostgreSQL, MongoDB, and Elasticsearch
• Proficiency in using Terraform for Infrastructure deployment and management
• Knowledge of cloud native solutions in AWS or GCP
• Systems experience in Linux and networking, especially in scaling for performance and debugging complex distributed systems
• Experience with monitoring and alerting systems

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2021. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Job Responsibilities

• Provide comprehensive security assessments for IT operations, ensuring the implementation of suitable security measures.
• Assist in the development and maintenance of security policies, addressing risks, and implementing measures to enhance system reliability and prevent unauthorized access.
• Collaborate with internal vulnerability assessment teams to analyze systems, identify vulnerabilities, assess risks, and determine protective measures through annual security assessments.
• Conduct information security and risk management awareness training programs.
• Investigate corporate infosec incidents, identify threats and their impact, and coordinate remediation efforts.
• Work with teams to achieve international accreditations such as ISO 27001, ISO 27017, ISO 27018, CREST, SOC2, and more.

Requirements

• Experience with enterprise information security and information risk management

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

TikTok will be prioritizing applicants who have a current right to work in Singapore and do not require TikTok's sponsorship of a visa.

About TikTok

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About The Team

The TikTok Data Ecosystem Team has the vital role of crafting and implementing a storage solution for offline data in TikTok's recommendation system, which caters to more than a billion users. Their primary objectives are to guarantee system reliability, uninterrupted service, and seamless performance. They aim to create a storage and computing infrastructure that can adapt to various data sources within the recommendation system, accommodating diverse storage needs. Their ultimate goal is to deliver efficient, affordable data storage with easy-to-use data management tools for the recommendation, search, and advertising functions.

What you will be doing:

1. Responsible for the design and development of distributed database Hbase-related components.

2. Responsible for the design and development of single-node LSM engine Rocksdb-related components.

Qualifications

What you should have:

- Bachelor's Degree or above, majoring in Computer Science, or related fields, with 2+ years of relevant development experience in the field with a strong programming ability, and proficiency in one of C/C++/Java;

- In-depth understanding of the architecture and principles of distributed systems;

- A willingness to tackle challenging problems without clear solutions, a strong enthusiasm for learning new technologies, and prior experience in managing large-scale data.

Preferred Qualifications:

- Embrace the use of open-source software, possess a track record of involvement in open-source projects, and demonstrate a keen enthusiasm for engaging with the latest and most advanced technologies.

- Exhibit knowledge in distributed consensus algorithms like Paxos/Raft.

- Show familiarity with distributed transaction models.

- Demonstrate proficiency in typical storage engines, including RocksDB, and have a deep understanding of the inner workings of Redis at the low-level code level.

- Display expertise in low-level aspects of operating systems, with a background in optimizing system performance for TCP/IP, I/O operations, and other critical component

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Information

Salary range: $3,000 - $4,000 with annual sales target incentive

Allowances: Transport allowance - $1,020 with Phone allowance - $70

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Familiarise company products, understand customer needs, and to offer solutions
• Demo product demonstrations and conduct presentations to mid-size audiences

Requirements:

• Diploma in Engineering
• Good verbal communication
• Possess self-discipline, integrity & initiative; independently, good team player
• IT Savvy in document, presentation & spreadsheet softwares;
• Experience in industrial sales

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: AV Engineer
• Working Location: Kallang (near MRT)
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with different parties to deliver high-quality audio-visual and video conferencing solutions, ensuring they adhere to company standards and best practices and fulfill customer requirements.
• Configure, test, and commission professional audio solutions for different venues and corporate meeting rooms, integrating them with other audio-visual and video conferencing systems.
• Provide end-user training, guiding users on how to effectively operate and utilize the implemented solutions.
• Work closely with in-house AV Designers and Engineers, as well as manufacturers such as EV, BOSE, Martin Audio, Samsung, Logitech, etc. to implement fully integrated AV solutions for spaces such as lecture halls, meeting rooms, command centres, auditoriums, and ballrooms.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in IT/ Engineering/ Audio Visual.
• At least 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solutions.
• Good skills and knowledge of DSP programming.
• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a leading manufacturing company. They are looking for a Senior Software Engineer to upport the next phrase of their business. They are located at East of Singapore– easily accessible. The Senior System Software Engineer is responsible for:

Duties

• Design and develop the software architecture for company instrument systems.
• Collaborate closely with the hardware engineering team to analyze system requirements, ensuring functionality, performance, and reliability are achieved.
• Define and document software requirements, architecture, design, and test plans to align with system goals.
• Implement and test system software, addressing issues until resolved to meet customer expectations.
• Ensure timely delivery by aligning software development with project schedules and requirements.

Requirements

• Min Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.
• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware will be preferred
• Solid programming skills in C/C++/C#
• At least 3 years of experience with system/architecture development on an equipment system.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description

• Industry/ Organization Type: IT Communications Service Provider
• Position Title: System Support Engineer (Telecommunication/ PABX)
• Working Location: Central (Nearest MRT: Mattar)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Configuration of Voice/Network peripherals, VoIP/ Cloud PABX, Network Switches etc.
• Provide helpdesk and remote support to customers, as well as onsite technical troubleshooting.
• Validate System Design Documents to ensure alignment with customer requirements.
• Build and maintain strong customer relationships through a proactive approach and positive attitude.
• Continuously acquire and update product knowledge in line with industry trends.

APPLY NOW!!!

• At least ITE with minimum 1 year of related working experience.
• Experience in deploying and managing Voice/Data project, supporting VoIP telecommunication systems, network switches, troubleshooting LAN/VoIP systems is an advantage.
• Good knowledge in IT and communication system/PABX is required
• Alcatel, Mitel and Yeastar PABX knowledge will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71498 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641