As a Product Engineer at Micron Technology, Inc., you will be responsible in developing, validating, characterizing, and qualifying new state-of-the-art NAND Flash memory products. In this role, you will be involved in pre-silicon conceptual design and preparation work, run simulations, create and maintain design and validation documentation, analyze bench and parametric data as well as to debug & resolve yield, quality and reliability failures due to design related issues. You will also refine and develop best known methods and automation for design validation of current and future products.

Key Responsibilities:

• Responsible for in-depth data analysis to look for sighting that is detected from reliability testing on certain cell marginality.
• Develop state-of-art and advanced algorithms, encompassing advanced models to boost and enhance data-mining and pattern recognition for quality and yield improvement.
• Work with Product/Fab/Engineering teams on product issues (yield/cell/qualification/defectivity/RMA/deviations) in problem analysis, data-mining and modeling, to provide optimal disposition solution.
• To develop state-of-art and advanced algorithms, encompassing Machine Learning and Deep Learning models to boost and enhance data-mining and pattern recognition for quality and yield improvement.
• Collaborate with cross functional team to translates functional specifications into technical designs for implementation and deployment.
• Setup data processing systems to facilitate access to cloud/on-prem database and identify opportunities for improvements and optimization.
• Work with IT team and vendor to enable cloud platform in Micron environment and optimized GCP cost.
• Develop tailored made machine learning solution and collaborate with TPG data science team to translate idea to data science prototypes.
• Continuous improvement on software build by investigating alternatives and technologies in support of systems development efforts.

Requirements:

• Bachelor's/Master's in Electrical/Electronic Engineering, Computer Engineering, Computer Science, Data Science.
• Proficiency in software development (e.g., C-based programming) and scripting (e.g., Perl, Python).
• Knowledge of Machine Learning/Deep Learning methodology.
• Strong drive and excellent written and verbal communication skills, including ability to effectively communicate complex technical ideas/concepts.
• Strong analytical and problem-solving skills, with the ability to find creative solutions to difficult problems.
• Effective communication skills in written and spoken English.
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Self-motivation and enthusiasm

Job Description

• Industry/ Organization Type: Manufacturing (Shipbuilding)
• Position Title: Mechanical Service Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Mon – Fri, 8.30 AM – 5.30 PM)
• Salary Package: Basic salary up to $3,200 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Assist in the design, analysis, and troubleshooting of mechanical systems and components for marine applications.
• Collaborate with cross-functional teams on the installation and commissioning of mechanical equipment and systems on vessels and offshore structures.
• Perform regular inspections and maintenance to ensure mechanical systems function properly and adhere to safety standards.
• Work alongside senior engineers to enhance mechanical systems for optimal performance and efficiency.
• Contribute to the creation of project specifications, documentation, and technical reports.

APPLY NOW!!!

• Diploma or Degree in Mechanical Engineering or related field
• Effective communication and teamwork abilities
• Able to work on vessel
• Candidates without experience are welcome to apply. Training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66153 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing / Construction
• Position Title: Project Engineer
• Working Location: Senoko
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $2,800 + Transport Reimbursement + Mobile Allowance + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Report to the Project Director on the financial aspects, timelines, and resource allocation for project operations.
• Keep thorough records and verify the precision of all drawings and plans to meet project and client demands.
• Participate in meetings with clients and site visits.
• Build and nurture positive relationships with clients.
• Perform additional duties as directed by superiors.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Electrical Engineering or equivalent
• Has 1-2 years of relevant working experience
• Proficiency in AutoCAD and/or Microsoft Project is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67096 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Electrical Equipment Manufacturer/ Production
• Position Title: Sales Engineer / Senior Sales Engineer
• Working Location: Ubi
• Working Hours: Monday to Friday, 8.30 am – 6 pm
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Prospect for new customers and maintain existing key accounts.
• Provide quotations for project tenders and offer technical support to agents.
• Attend site meetings and provide after-sales services and follow-up.
• Cultivate and maintain good working relationships with customers.

APPLY NOW!!!

• At least a NITEC in Electrical/ Electronics Engineering.
• Minimum 2 years of sales experience with good contacts among contractors.
• Able to start work immediately or on short notice.
• Possess own transport.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67175 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Rotating Shiftwork (Day & Night) - Monthly Rotation
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Data Framework Engineer

Expected Years of Experience: 8-10 years

SCOPE OF THE ROLE

You will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support.

You will also be responsible for quality assurance of the team’s delivery in conformance with the Bank-defined software delivery methodology and tools. You will partner with other technology functions to help deliver required technology solutions.

Other responsibilities include:

- Create frameworks, technical features which helps in faster operationalisation of Data models, Analytical models (including AI/ML) and user generated contents (dashboards, reports etc)

- Effectively partner with data scientists in enabling faster adoption of AL/ML model based systems

- Independently install, customise and integrate software packages and programs

- Carry out POCs involving new data technologies

- Design and develop application frameworks for data integration

- Create technical documents such as solution design, program specifications for target solutions

- Perform design and development of applications which may not be limited to: Software Applications, Data Integration, User Interfaces, Automation

- Maintain and recommend software improvements to ensure a platform centric management of software applications

- Performance tuning

- Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

- Perform tasks as part of a cross functional development team using agile or other methodologies and utilising project management software

Technical skillsets

TEAM Architecture (Big Data)

- 8+ years of experience with application development in Big Data Ecosystem (such as Cloudera, ElasticSearch, Spark, Presto, Hive, Impala, Kibana, Logstash, Hbase, Kafka),

- Expertise in building applications using Java, Scala, Python, Shell scripting

- Experience in large scale implementations and performance optimizations in the Big Data Ecosystem using Spark, Hive, Impala, Apache Kudu, Ozone, Presto, Tez, Iceberg etc

- Knowledge of frameworks such as Spring, Struts, Hibernate etc

- Knowledge of Object Oriented Programming, Multi-threading, Containerization, etc

- Knowledge of related technologies such as HTML, Javascript, CSS, React, Jquery, node.js, docker

- Knowledge of Elastic, Kibana, Logstash, Hive, Sqoop, MongoDB, Oozie, Flume, Kafka

- Expertise in integrating applications with Devops tools

- Knowledge of building applications on MPP appliances such as Teradata, Greenplum, Netezza is a plus

At least, 2 to 3 technical certifications in any of the below technologies:

1. Language – SQL, Java, Python, Scala, Javascript, node.js
2. Automation / scripting – CtrlM, Shell Scripting, Groovy
3. Cloudera Hadoop distribution – Hive, Impala, Spark, Kudo, Kafka, Flume

Additional Experience required for all teams to create an added advantage:

1. CI/CD software, Testing Tools - Jenkins, SonarQube
2. Version Control Tool - Aldon+LMe, CA Endeavor
3. Deployment Tool kit -Jenkins
4. Service or Incident Management (IcM) Tools - Remedy
5. Source Code Repository Tool - Bitbucket
6. Scheduling Tool - Control-M
7. Defect Management Tool - JIRA
8. Application Testing tool – QuerySurge
9. Cloud certification
10. Platforms provided by FICO, Experian, SAS for credit and portfolio management

EDUCATION

- Bachelor’s degree/University degree in Computer Science, Engineering, or equivalent experience

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Jobscope

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe/Models.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Ensure we adhere to our approved procedures and update these as required.
• Own one or more multiple equipment/GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with major in Chemistry, biomedical science
• Preferably 0-3 years’ experience in a relevant manufacturing environment.
• Able to commit to rotating shift

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

- Outsourced 1 year contract

- Up to $6k + Standby allowance $200

- Ang Mo Kio

- Mon to Fri : 8:30 am to 6 pm

Job Descriptions :

The L2 System Engineer (Linux) is responsible for:

• Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.
• Performing system recovery if needed.
• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.
• Ensuring that the System runs according to contractual specifications after problem resolution.
• Providing advice on system / database performance monitoring and tuning.
• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.
• Complete all Service Requested accordingly to SLA timeframe.
• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.
• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.
• Coordinating system development tasks to include design, integration and formal testing on the Change Request.
• Overseeing all transitions into production on the Change Request.
• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.
• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.
• Managing and document system configurations on the Change Request.
• Perform troubleshooting and resolve incident based on SLA.
• Generating the relevant administrative records and reports.
  
  

Period:

• 1 year contract (outsourced contract)

Working Hours:

• Mon to Fri : 8:30 am to 6 pm

Salary:

• Up to $6,000 + Standby allowance $200

Working Location:

• Ang Mo Kio

Job Requirements:

• Degree/Diploma in Computer Science, Computer Engineering or equivalent, although consideration will be given to experience and certifications in lieu of degree.
• Minimum 3 to 5 years IT experience
  

Special Knowledge or Skills:

• Past working experience in Cloud environment is an advantage
• Able to handle demanding service response and recovery turnaround
• Able to manage daily support tasks to meet stringent SLA requirements
• Excellent scheduling and multitasking skills
• Meticulous and process-oriented
• Good, hard-working attitude with ability to work well under pressure
• Good communication skills English (written, spoken)
• Good analytical skills with ability to work with others to resolve problems.
• Good organization skills, with ability to properly document and track information.
• Preferably with Microsoft Certification and/or ITIL certification.
• Dynamic, customer oriented, experience working in a fast paced environment.
• Good Knowledge of following products will be advantageous:
• -Linux,Unix, Ansible, Satelite, GPO Compliance

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Electrical and Control Design Engineer | Up to $5.8k | 5 Days | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Rotating Shiftwork (Day & Night) - Monthly Rotation
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Descriptions

Maintaining and administering the networks environments including hardware, and configurations.
Performing disaster recovery operations and data backups when required.
Protecting data, software, and hardware by coordinating, planning and implementing network security measures.
Troubleshooting, diagnosing and resolving hardware, software, and network problems.
Replacing faulty network hardware components when required.
Monitoring network performance to determine if adjustments need to be made.
Coordinating computer network access and use.
Administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
Responding to inquiries from users, IT peers, vendors and to provide technical assistance and support.
Ensure control and compliance for the systems and servers related are available to only authorize users which follows policies and SOPs closely.
Attending audit meetings and ensure proper documentation of all work done.
Vendor management
Establish/maintains customer relationship with partners or internal users to ensure complete understanding of business processes to enable the delivery of viable Infrastructure solution.
Provide PABX support based on Client’s SOP and documentation
Attending to machine faults related to network problems during office and after office hours.
Job Requirements:

3-4 years of network
Network security
HPE network
Wifi knowledge (Aruba or Cisco)
Fortigate, Palo, or Cisco firewall experience
Megapop and SD-WAN knowledge
Work with vendors
Networking best practices
PABX knowledge (will be good)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

Responsibilities:

• Respond to production issues and emergencies, such as process outages, alarms, or equipment failures.
• Diagnose and take corrective actions, or work alongside the Manufacturing supervisor to restore operations and prevent safety or quality incidents.
• Collaborate with the production team to maintain process stability and operational efficiency.
• Identify and implement opportunities for operational improvements.
• Assist and guide Standard Users with system-related questions and issues.
• Support manufacturing operations outside regular hours, including attending to urgent requests to ensure timely issue resolution.
• Work on holidays and overtime as needed, with flexibility to adjust work schedule to meet production demands.
• Participate in projects involving manual intervention. Identify, implement, and test system changes.
• Follow all Environmental, Health, and Safety (EHS) requirements.
• Maintain fair and respectful relationships and adhere to company’s Code of Conduct.
• Perform other duties as assigned by the supervisor.

Requirements:

• Degree in Chemical Engineering, Bioengineering, Chemical & Biomolecular Engineering, Pharmaceutical Engineering, or related field,
• Min 2-4 years of experience in biotechnology or pharmaceuticals industries
• Self-motivated team player with a hands-on attitude and strong communication skills.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

• Gantry Associate Engineer (2 years contract renewable)
• 4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am
• Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.
• Salary: $2700 -$3000
• Location: Bedok office

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Review and interpret construction drawings, method statements, and risk assessment forms for job and tender submissions.
• Serve as the main liaison between the site office and headquarters to facilitate the integration of e-invoicing systems.
• Coordinate with various departments to ensure seamless communication and workflow.
• Assist in promotional and marketing initiatives to revamp the company's corporate website.
• Ensure compliance with all relevant regulations and industry standards.
• Maintain accurate records and documentation of all site activities and communications.
• Strong understanding of construction drawings, method statements, and risk assessments.
• Experience with integrating e-invoicing systems is preferred.
• Background in promotional or marketing activities.
• Excellent communication and interpersonal skills.
• Proficient in Microsoft Office Suite and relevant industry software eg. Asurix.
• Ability to work independently and collaboratively within a team.
• Strong organizational skills and attention to detail.

As a Steel Structure Engineer specializing in steel structures, you will be responsible for planning, designing, and overseeing the construction and integrity of steel-based structural components and frameworks. This role involves ensuring structural safety, compliance with codes and regulations, and independent delivery of engineering solutions from inception to completion.

Key Responsibilities:

1. Design and Analysis: Conduct structural design calculations for steel components, connections, and frameworks, ensuring compliance with relevant codes (e.g., AISC, Eurocode, or BS standards).
   Analyze load-bearing requirements, seismic impact, and material properties to create safe, efficient designs.
   Create detailed drawings, specifications, and technical documentation.
   
2. Project Management: Manage steel structure projects from initial design to final implementation, including budgeting, scheduling, and coordinating with other teams.
   Perform risk assessments, implement quality control procedures, and ensure compliance with safety and environmental standards.
   Monitor project progress, making adjustments as necessary to stay on track with timelines and budgets.
   
3. Collaboration and Coordination:Work closely with architects, civil engineers, project managers, and construction teams to integrate structural requirements into overall project design.
   Coordinate with suppliers and contractors to ensure timely and accurate delivery of materials and execution of installation.
   Provide technical guidance and oversight to junior engineers and drafters.
   
4. Quality Assurance and Compliance: Conduct on-site inspections, quality checks, and structural assessments to ensure compliance with design specifications.
   Ensure that all steel structures meet safety and regulatory requirements, adapting designs as needed for unforeseen challenges.
   
5. Reporting and Documentation: Prepare project reports, cost estimates, and technical summaries for stakeholders.
   Maintain organized records of project documentation, calculations, and revisions.
   

Requirements:

1. Education and Experience:Bachelor’s degree in Civil Engineering, Structural Engineering, or related field. At least 2 years of experience in steel structure engineering, with a strong portfolio of completed projects.
   
2. Technical Skills: Proficiency in structural analysis software (e.g., STAAD Pro, ETABS, SAP2000) and CAD tools (e.g., AutoCAD, Tekla, Revit).
   Solid understanding of steel design standards, load calculations, material properties, and connection detailing.
   
3. Project Management Skills:Strong project management abilities, including budgeting, scheduling, and resource allocation.
   Ability to independently lead a project from start to finish, making critical decisions as necessary.
   
4. Soft Skills:Excellent communication and interpersonal skills to collaborate effectively with multidisciplinary teams. Detail-oriented with a strong commitment to accuracy and quality. Problem-solving skills to address design and site challenges effectively.