As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Senior Project Engineer

Responsibilities:

• Lead a team of Engineers and Technicians for the execution of I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Work with team to prepare, review, and submit all the related samples, catalogues, method of statement, risk assessments, panel layout details, design/shop drawings, Operational & Maintenance manual, As-built drawings, and etc for consultants and clients review and approval
• Work closely with team to control and monitor the execution of the projects to ensure that the projects meet the planned schedule, quality and cost requirement
• Communicate and coordinate with all the related stakeholders including internal teams, clients and contractors during the execution of the projects
• Manage site installation and site commissioning
• Manage and oversee the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) in accordance to the clients' requirements
• Troubleshoot and resolve any issue arise during the deployment of the control system
• Prepare and submit the progress claims with all the necessary supporting documents to clients for payment clarification
• Any other duties as assigned by manager

Requirements:

• At least a Degree in Electrical, Electronics or Instrumentation & Control related discipline
• At least 5 years project management working experience related to I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Good knowledge on basic electrical design & control system design philosophy
• Able to work effectively in a multidisciplinary environment
• Possess Class 2 or 3 driving license with own vehicle will be an advantage

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Responsibilities

1. Technical oversight and issue resolution

2. Safety and quality management

3. Project administration and progress monitoring

4. Stakeholder management and coordination

5. Reporting and compliance

Key Skills:

1. Technical knowledge

2. Communication and coordination

3. Analytical and problem-solving

4. Safety and quality management

5. Stakeholder management

Qualifications & Experience

1. 8+ years of experience in civil & structural engineering

2. Relevant experience in deep excavation, foundation, tunnel, and building works

3. Recognized Civil & Structural Engineering degree (PEB Singapore)

4. Accredited by JAC (IES/ACES)

5. Proficient in PSSCOC contract administration

6. Strong leadership, supervision, and interpersonal skills

7. Commitment to safety and health

8. Familiarity with statutory codes, quality control, and construction administration

Desired Qualities:

1. Proven track record in leading supervision teams

2. Excellent organizational skills

3. Strong communication and interpersonal skills

4. Ability to manage teams and ensure personnel welfare

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Basic salary: ($3200 - $4500)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to speak both English and Mandarin to liaise with Chinese speaking clients

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Requires software engineering experience, in particular to equipment such as Automatic Guided Vehicle (Car Parking) systems.

Salary $3500.

Five and half (5.5) work days per week.

Fourteen (14) days annual leave.

Medical Leave.

Ability to speak Mandarin will be advantages because needs to converse with our manufacturer's engineers in China/Taiwan.

Need to be able to work independently.

Responsibilities:

• Manage optimum level of operations and maintenance of automation assets and ensure the Automated Storage & Retrieval System (ASRS) is running with zero downtime.
• Work closely with operation managers to manage customers’ expectations, contract deliverables, and project goals for their logistics solutions.
• Proactively identify, propose, and undertake process improvement projects in improving operations performance and drive cost savings initiatives.
• Responsible and accountable for customer's inventory stored in ASRS system by providing ensuring KPIs are met and generates reports as per request.
• Monitor and manages customer KPI, Inventory movements and activities to ensure just in time delivery.
• Work with vendors to diagnose problems and determine corrective solutions.
• Responsible and accountable for inventory control of critical spares parts, ensuring parts availability through early parts purchase.
• Partner with IT team and storage system vendor to troubleshoot system disruptions ensuring prompt recovery.
• Usage of appropriate subcontractors and ensure clearly defined performance requirements
• Provide specialist expertise on overall maintenance of ASRS, robotics and automation to support business operations

Requirements:

• Min Degree in Electrical & Electronic / Mechatronics / Mechanical/ Industrial Engineering.
• Experience in supporting Dematic Multi Shuttle and Swisslog Auto Store is a must.
• 3 to 5 years' relevant experience in maintenance of automation systems for logistics industries.
• 3 to 5 years' relevant experience in end-to-end project implementation for Robotics and Industrial Engineering.
• Excellent communication and stakeholder management skills.
• Ability to read & use Electrical Single Line and Mechanical Drawings is preferred.
• Knowledge in using AutoCAD and simulation software is preferred but not essential.
• Experience and strong knowledge in Material handling systems, Equipment and Programs with hands on in Programmable Logic Controller (PLC) and other systems is preferred.
• Experience in warehouse management system, warehouse control system ( SynQ and Dematic) and warehouse execution system.
• Experience in warehouse operations ( Inbound /Outbound / Inventory) is preferred.

At DHL Supply Chain we take pride in our commitment to fostering a workplace that celebrates diversity and promotes inclusion for all. We believe that the diverse backgrounds, perspectives, and experiences of our employees are integral to our success. Our inclusive culture is built on the principles of equality, respect, and belonging, where every team member is valued and empowered.
We actively encourage individuals from all walks of life, regardless of age, race, gender, sexual orientation, religion, nationality, disability, or any other characteristic, to apply for positions with us. We are dedicated to providing equal opportunities, removing barriers, and creating an environment where everyone feels they truly belong.

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 3 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

Responsibilities:

- Develop new customers besides servicing existing customers.

- Proactively explore business opportunities and expand market share.

- To maintain close working relationships and follow up with key customers to grow new sales.

- Follow up on customer technical inquiries and ensure their requirements are met.

- Generate trends analysis and customer requirements reports.

Requirements:

- Degree in Mechanical / Manufacturing/Mechatronic/Material Science or min 3 - 4 years in Sales & Marketing.

- Ability to interact with customers to build good relationships.

- An independent and aggressive person eager to explore new business areas.

- High self-motivation, pleasant personality with good interpersonal & communication skills.

- Able to work closely as a team.

- Able and willing to travel.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Overview:

We are seeking a highly skilled and experienced DLP resident engineer with profound knowledge in leading DLP solutions such as Trellix, Forcepoint, Digital Guardian, Symantec, Skyhigh or Zscaler as well as database technologies like MSSQL. The successful candidate will be responsible for maintaining and fine-tuning an advanced DLP solution for a large organization, and will work closely with various stakeholders to ensure a successful implementation as well as manage an integrated reporting dashboard.

Primary Responsibilities:

• Collaborate with stakeholders to create, review, and finalize DLP policies and rules
• Develop and maintain technical design documentation, configuration documents, and build guides
• Assess customer environment and validate pre-requisites prior to implementation
• Develop, configure, and test DLP policies and rules to ensure effectiveness and compliance
• Lead User Acceptance Testing (UAT) and pilot testing phases to address any issues and validate success
• On-site support for issue troubleshooting
• Execution of change requests to remediate issues

Qualifications and Experience:

• To be able to demonstrate an expertise and deep understanding in your area of practice
• 1 year experience in information and cyber security or a similar role
• Implementation or management of cyber security solutions
• Experience with MSSQL administration and crafting/running SQL queries
• Experience with DLP technologies/other cybersecurity technologies a plus
• Experience with windows tools, administration and IIS a plus
• To be able to demonstrate soft skills to interact and engage customers and various stakeholders
• Ability to work independently and with minimal supervision on projects
• Able to work in a team
• Strong problem solving, oral and written communication skills
• A strong desire to step out of your comfort zone and into an opportunity where you drive the work

Preferred Credentials (optional):

• Relevant certifications in leading DLP solutions (e.g., Trellix, Forcepoint, Digital Guardian, Symantec)
• Industry certifications in information security, such as CISSP, or CCSP
• Familiarity with change management procedures a plus

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Responsibilities:

Managing and Operating Red Hat Platform Operations Day 2:

• Red Hat Enterprise Linux
• Red Hat Identity Management
• Red Hat Satellite
• Red Hat Ansible Automation Platform
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum 3 years of hands-on experience with Red Hat Enterprise Linux administration.
• Familiarity with security tools and protocols in a Linux environment.

Preferred Qualifications:
Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).

Key Responsibilities:

Design & Development:

Assist in designing, developing, and testing electronic circuits and systems.

Support PCB (Printed Circuit Board) design, layout, and testing.

Assist in developing prototypes and performing hardware debugging and troubleshooting.

Software Development & Embedded Systems:

Collaborate on developing embedded software for microprocessors and other embedded systems.

Assist in the integration of hardware and software components for electronic systems.

Support programming tasks using C, C++, or Python in embedded environments.

Testing & Evaluation:

Assist with hardware and software testing, verification, and validation of electronic devices.

Document test results and work with engineers to identify areas for improvement.

Research & Development:

Contribute to the research of new technologies and innovations in electronics and computer engineering.

Support the team in evaluating new components, tools, and methodologies.

Collaboration & Reporting:

Collaborate closely with engineers, software developers, and product teams to meet project requirements and deadlines.

Prepare technical documentation and reports for internal review.

Qualifications:

Currently pursuing a Diploma or Bachelor’s or degree in Electronic Engineering, Computer Engineering, Electrical Engineering, or related field.

Strong knowledge of electronic circuit design, digital systems, and embedded systems.

Proficiency in programming languages such as C, C++, and Python.

Basic understanding of microprocessors, and FPGA-based systems is a plus.

Ability to work independently as well as collaboratively in a fast-paced environment.

Strong problem-solving skills, attention to detail, and excellent communication skills.

Preferred Skills & Experience:

Experience with hardware/software co-design and integration.

Familiarity with debugging tools such as oscilloscopes, logic analyzers, and multi-meters.

Knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).

Understanding of machine learning and AI applications in embedded systems (a plus).

What We Offer:

Mentorship from experienced engineers.

Opportunity to work on impactful, real-world projects.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Overview:

We are seeking a highly skilled and experienced DLP resident engineer with profound knowledge in leading DLP solutions such as Trellix, Forcepoint, Digital Guardian, Symantec, Skyhigh or Zscaler as well as database technologies like MSSQL. The successful candidate will be responsible for maintaining and fine-tuning an advanced DLP solution for a large organization, and will work closely with various stakeholders to ensure a successful implementation as well as manage an integrated reporting dashboard.

Primary Responsibilities:

• Collaborate with stakeholders to create, review, and finalize DLP policies and rules
• Develop and maintain technical design documentation, configuration documents, and build guides
• Assess customer environment and validate pre-requisites prior to implementation
• Configure DLP solutions to work with Internet Content Adaptation Protocol (ICAP) for monitoring web traffic.
• Proficient in configuring ICAP and proxy integration for Data Loss Prevention (DLP) setups
• Develop, configure, and test DLP policies and rules to ensure effectiveness and compliance
• Manage the DLP appliance upgrade process, ensuring seamless updates and minimal disruption to operations
• Lead User Acceptance Testing (UAT) and pilot testing phases to address any issues and validate success
• On-site support for issue troubleshooting
• Execution of change requests to remediate issues

Qualifications and Experience:

• To be able to demonstrate an expertise and deep understanding in your area of practice
• 3 years experience in DLP Solutions and cyber security or a similar role
• Implementation or management of cyber security solutions
• Experience with MSSQL administration and crafting/running SQL queries
• Experience with Network DLP technologies a plus
• Experience with windows tools, administration and IIS a plus
• To be able to demonstrate soft skills to interact and engage customers and various stakeholders
• Ability to work independently and with minimal supervision on projects
• Able to work in a team
• Strong problem solving, oral and written communication skills
• A strong desire to step out of your comfort zone and into an opportunity where you drive the work

Preferred Credentials (optional):

• Relevant certifications in leading DLP solutions (e.g., Trellix, Forcepoint, Digital Guardian, Symantec)
• Industry certifications in information security, such as CISSP, or CCSP
• Familiarity with change management procedures a plus

Responsibilities:

The job focuses on the development of image and signal processing algorithms for the next generations of optical inspection and metrology systems. The responsibilities of this position covers the entire life cycle of algorithms, including modeling, proof-of-concept design, production software design and implementation, performance characterization, documentation and user support. Since algorithms can affect many aspects of the system, significant amount of time be spent on cross-function team collaboration for prototyping and testing.

Requirements:

• Ph.D. in Electrical Engineering, Computer Science and Physics with strong experience in algorithm development is preferred.
• The position requires a proven innovative track record and solid fundamental knowledge in the related fields of algorithm development, including image segmentation, texture analysis, classification, feature extraction, statistical data analysis, machine learning, signal processing, filter theory.
• Experience in any one of the following areas is a big plus: algorithm performance optimization, deep learning, distributed computing, parallel computing.
• Software skills required include C/C++, OOD/OOP, MATLAB and/or Python.
• The candidate needs to be a self-motivated individual with ability to work independently and/or in a team. Strong written and verbal communications skills are needed for extensive interactions with members of a multi-disciplinary global team.

Minimum Qualifications:

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years