Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Responsibilities

• Support the development and implementation of the company's Energy Management System (EMS)
• Collect, analyze, and report on GHG inventory data for Scopes 1, 2, and 3
• Manage the preparation and submission of corporate ESG and CSR reports
• Handle and address customer-specific EHS and ESG requirements
• Support the implementation of EHS activities and programs

Requirements

• Diploma in any engineering related field
• Entry level candidates are welcome to apply
• Possess good planning and organizing skills
• Basic knowledge in Microsoft Office (Word, Excel, PowerPoint)
• Basic knowledge in ISO 50001, ISO 14001 and ISO 45001 is an advantage
• Basic understanding of Singapore EHS legislations

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical role in the management of manufacturing information systems to improve manufacturing success rates and ensuring zero down time.

As a Senior Associate, your knowledge and skills will contribute towards the goals and objectives of the team. Your focus and ability to meet team targets will help in completing critical deliverables. Your innovative use of communication tools and techniques will facilitate in explaining difficult issues and establishing consensus between teams.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage and maintain the validated status of the EAMS maintenance management system by working with Quality Assurance team, Automation Information team, E/I maintenance team and vendor, on the data base, software and hardware validation.
• Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities (CAL, COR, and repairs) according to procedures, good engineering practices and cGMP.
• Perform day-to-day planning and scheduling instrument calibration and instrument maintenance activities to ensure smooth production.
• Develop instrument calibration and instrument maintenance program to maintain plant instrument assets. Review and modify the PM Calibration to improve instrumentation, control and reliability.
• Be the System Administrator /SuperUser on EAMS applications and conduct training to new user(s).
• Manage and utilize the EAMS as an effective tool to support the calibration team in compliance with cGMP and good maintenance practices.
• Maintain the quality and accuracy of data integrity of the EAMS system.
• Support manager to achieve financial objectives by preparing and controlling against approved annual maintenance budget; scheduling expenditures; analyzing variances; initiating corrective actions for instrumentation, control and repairs.
• Lead/participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Manage and maintain calibration Standard Operation Procedure (SOP) by generating procedures for the operation, review procedures, optimize procedures and training of procedures to the E/I calibration team.
• Manage and execute any modification and control of the calibration system in compliance with cGMP and good maintenance practices.
• Track instrument performance and conduct bench marking by tracking instrument breakdown, re-occurrence failure and instrument history report to enable Maintenance Team to focus on areas that required attention.
• Provide relevant operation and performance reports by generating reports on instrument maintenance work/PM statistics.
• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.
• Implement and maintain calibration record filing system by keeping all calibration documentation records and reports for fast retrieval, audit ready and comply to cGMP requirement.
• Work with E/I Supervisor and Maintenance Planner to enhance maintenance activities on Global Reliability Program (GRP) / Preventive Maintenance Optimization (PMO).
• Coordinate between the E/I and Production team; Area owners and Maintenance Repair & Operation (MRO) store on shutdown activities and major maintenance jobs, plan and schedule calibration/PM work orders accordingly.
• Work with E/I Supervisor and Maintenance Planner on updating the Key Performance Index (KPI) established.
• Liaise with Production to support new product tech-transfer, project construction and commissioning through active involvement in commissioning activities; discuss instruments hardware improvement and modifications.
• Maintaining good working relations with team by working closely with E/I, Automation, Production and vendor in consultation with the team to resolve any issues.
• Support Project team on special / urgent assigned projects to meet the requirement, schedule and budget target.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Provide training (e.g. OJT) and coaching to colleagues to build-up their competencies.
• Participate IMEx Process Centric Team Tier 1 meetings and address engineering issues based on priority.
• Develop or support TPM-OPC checklists, train and coach operation team in OPC tasks and knowledge.
• Complete all assigned training on-time and also prior to work execution.
• Contribute to team effort by accomplishing desired results/KPIs.

Qualifications

Must-Have

• Degree / Diploma in Engineering related qualifications. Minimum 10 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries.Other Job Related Requirements:
• Good working knowledge of CMS application, CGMP, GMI strategies and PMO concept.
• Knowledge of Reliability Maintenance, Right First Time technique and performance base management.
• Experience in a large, global and complex organization would be an advantage
• Able to handle multiple projects concurrently and possess project management experience
• Able to influence stakeholders or Business Leaders and to build trust throughout the organization
• Demonstrated capability to thrive in a complex and matrix environment
• Able to work with ambiguity
• Demonstrated problem-solving and relationship management skills
• Demonstrated consultative skills
• Consistently demonstrates clear and concise written and verbal communication
• Knowledge of cGMP and regulatory requirement related to instrument validation.
• Good interpersonal skills and meticulous in producing quality output.
• Proven teamwork and problem solving ability, customer focus and commitment to continuous improvement.
• Ability to work effectively across functional teams and at multiple-levels within the organization.

Nice-to-Have

• Master's degree
• Understanding of programming, and proficiency in at least one language

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to join our team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Charmaine Soh | Reg No.: R24122333

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

---

One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The school plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The school’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

We're hiring a Full-Stack Software Engineer for a short-term role to develop a software that employs artificial intelligence to manage ship and crew risks.

Key Responsibilities:

• Develop new software or enhance existing platforms to connect with multiple devices (e.g., smartwatches and tablets) and databases (e.g., AIS and weather data).
• Design and implement systems to monitor and control ship risks and enhance seafarer wellbeing.

Job Requirements:

• Education Qualification: Degree in Software Development and Engineering or equivalent
• Key Computing Skills:
  Proficiency in JavaScript or TypeScript (preferably TypeScript).
  Experience with Node.js.
  Competence in React.
  Knowledge of SQL databases (e.g., PostgreSQL, MySQL, or MariaDB).
  Knowledge of NoSQL databases (e.g., MongoDB, CouchDB, or Redis).
• Interpersonal skill
  Ability to work independently and develop solutions under strict timelines
  Meticulous attention to detail, with excellent organisational and time management skills
• Strong written and oral communication abilities
• Familiarity with the maritime industry is an advantage

We regret to inform that only shortlisted candidates will be notified.

• Location: Boon Lay
• $3500 - $5000
• Mondays – Fridays: 8am – 6pm, Saturdays: 8am – 12pm
• LTA Project

Responsibilities:

• Plan, organize and arrange daily construction activities.
• Supervise the direct workers and to give instruction to the sub-contractors.
• Coordinate with land surveyors and sub-contractors on all setting out works.
• Liaise with QP(S) representative for inspection of site works.
• Organize and supervise house-keeping and safety implementation.
• Report daily manpower and machinery to the Project Manager.

Requirements:

• Diploma / Degree holder in Construction / Building or related
• Min 2 years of working experience

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1880058 | Dylan

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 4-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duration: 1 year, potentially extendable

The job descriptions are as follows:

• Experience in setting up and configuration of communication and network system eg. Muxes, Radios, Public Address System, PABX, network switches and routers.

• Analyse, isolate and resolve system integration issues.

• Liaise with vendors for procurement of equipment.

• Assist in testing of system to ensure seamless deployment.

• Generate System and Installation Control Document.

• Plan, generate test cases and procedures to carry out acceptance tests.

Working Hours: 8.30am – 6pm

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction

This role is to provide effective leadership to drive a systematic approach to risk identification, mitigation and safety management through engineering solutions, communicate and mentor other engineers on site-wide Safety policies and processes and compliance with all local environmental, health and safety laws.

Your Job

• Conduct the necessary risk assessments and workplace Safety and health training of other engineers and employees to enhance their safety and health knowledge and technical capability;
• Supervise and conduct the audits of departments, contractors, suppliers and waste vendors in conjunction with other functional partners and stakeholders and follow up corrective actions. Coordinate audits related to ISO14001/45001, Responsible Business Alliance, Regulatory and Customer requirements.
• Establish and maintain Safety specifications, standards and programs including but not limited to process safety, accident and injury prevention, Safety inspections, emergency preparedness programs, MHI/PSM, regulatory licenses and permits, compliance, targets and objectives.
• Recommend and implement engineering controls, operating procedures and other methods to eliminate or reduce hazards affecting Safety and health.
• Maintain EHS-related systems including chemical management, gas detection and calibration, permit-to-work, management of budget / contract / schedule / troubleshooting and personnel as required.
• Investigate and follow up on incidents and any Safety concerns and identify trends and analyses for preventing the recurrence.
• Maintain existing and creating new workplace Safety and health systems and communication to improve workplace Employee engagement within EHSS aspects.
• Ensure requirements of the applicable regulations e.g. Employment Act, Workplace Safety and Health Act, Regulations, Fire Safety Act, Radiation Safety Act, etc. are adhered to.
• Improve the execution of respective emergency preparedness plans and response teams’ training to address the likely types of emergencies that may occur at the site.
• Support site operations for the Safety and Emergency Response Department.

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs.
• Must work well within a team, support a growth mindset and be able to mentor junior colleagues in a healthy, productive way.

Required Qualifications:

• Education: A technology-related Bachelor’s degree / Bachelor of Environmental and Occupational Health & Safety.
• Years of Experience: a minimum of 7 years of related experience; or a Master’s degree in a technology field with a minimum of 5 years of related experience.
• Other Essential Attributes: – Excellent verbal and written communication skills;
• Demonstrated ability to work well within a global matrix-team or environment

Preferred Qualifications:

• Advanced Certificate in Learning and Performance (ACLP)
• Registered Workplace Safety and Health Officer (WSHO)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

**Qualifications and Requirements:**

- Minimum of a Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, or a related field.

- Proficiency in maintaining automation equipment.

- Experience working on offshore projects.

- Strong creative thinking skills.

- Excellent verbal and written communication skills.

- Strong analytical skills.

- Ability to stay updated with the latest technologies.

- Commitment to continually upgrading technical knowledge.

- Knowledge of onboard systems or equivalent vessel system knowledge.

- Familiarity with electrical and electronic components is preferred.

- Ability to work onboard (offshore) for extended periods, often for months at a time.

- A minimum of one year of experience in the onboard/offshore field is preferred.

- Capability to learn quickly and work independently in a fast-paced environment.

- Experience in relevant fields such as ship automation is a plus.

- Familiarity with applicable codes related to electronic engineering.

- Proficiency in PLC programming and troubleshooting using structured text programming.

- Strong team player with effective interpersonal skills.

RF Unit

• Disassemble Signal generator unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Oscilloscope
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation