Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

Working Day: Mon to Fri, 8.30 am-6pm

Salary: $5000 - $5500

Location: Sims Dr, Singapore 387384 (Geylang)

Main job scope:

• Section Lead for Company payroll processing (around 600 headcounts)
• Calculate monthly incentives
• Responsible to ensure monthly payroll is on time, accurate and error free
• Generate payroll computation summary, bank and inter-bank Giro report for approval
• Ensure payroll reconciliation and upkeep good audit standards
• Upload payroll files for authorization
• Generate monthly payroll estimates and reports for Finance
• Responsible for monthly CPF submission
• Responsible for annual IR8A auto inclusion processing
• Prepare payroll worksheets for Annual Wage Supplement, Performance Bonus, Year End Sales Incentive, Length of Service Bonus
• Prepare payroll worksheets for annual salary increment
• Prepare promotion salary adjustment spreadsheet
• Generate annual leave carried forward report and accrual amount
• Generate data and figures in preparation for MOM Labour survey
• Generate data and figures for SNEF HR Indicators and Salary survey
• Generate data and figures for Department Statistics and SME Development surveys
• Responsible for HRMS updates, initialization and maintenance
• Responsible for HR Petty Cash Float
• Conduct the Monthly Office Meeting by collating department slides updates, prepare new hires introduction, purchase birthday cake and meals and, generate attendance list
• Responsible for Workmen Compensation Claims and Foreign Worker Medical Insurance Claims
• Update Referral Record and pay Referral incentives
• Conduct the Monthly Office Meeting by collating department slides updates, prepare new hires introduction, purchase birthday cake and meals and, generate attendance list
• Review payroll processes and implement changes
• Provide guidance to junior staff
• Assist in HR Project

Others:

• Assist with salary and benefits benchmarking exercise
• Assist to conduct employee survey
• Assist with talent acquisition and recruitment responsibilities
• Assist with the HRMS Project
• Generate monthly HR reports for management reporting
• Generate Purchase Request in NAV system

Requirements:

• Minimum Diploma in HR management and relevant studies
• At least 5 years work experience in payroll in F&B Chain

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Job Description:

We are looking for a skilled Product Design Engineer with a specialization in high-speed connectors to join our team. This role involves supporting the development and manufacturing of innovative products, focusing on high-speed datacom connectors. You will work closely with manufacturing teams to assess the feasibility and production capabilities of new concepts, ensuring product quality and reliability.

Key Responsibilities:

• Product Development Support:
  • Collaborate with manufacturing teams to review new product concepts, assess feasibility, and provide feedback on plant capability.
• Technical Analysis:
  • Perform Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to validate product performance and structural integrity.

Requirements:

• Proven design experience with high-speed connectors.
• Experience in designing connectors for the high-speed datacom segment.
• Strong analytical skills with expertise in FEA and tolerance analysis tools.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Location: Jurong East

Working hours : Mon – Fri, 8.30am – 5.30pm

Responsibilities:

• To research and develop new security products and services for ASEAN region and provide technical support to Operations Division
• Develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards and company protocols.
• Conduct Market Research on products of Security System in ASEAN region.
• Analyze market trends and customer needs to identify opportunities for finding suitable new product.
• Work with Japan HQ R&D and China R&D center for product development.
• Conduct Survey about existing and future infrastructure, electrical power / telecom network etc. to ensure compatibility of security products and services.
• Provide support as Field Technical Specialist and visiting clients to check and maintain CCTV Surveillance System.
• Assist in obtaining required technical certifications for new / existing products for each countries
• Conduct testing system components, including control panels, sensors, cameras, access readers, and communication devices.
• Analyze test results, identify and troubleshoot system malfunctions, and document findings clearly.
• Work with manufacturer or distributor to resolve issues
• Provide technical support to internal customers in ASEAN region.
• Conduct research about standards like SS558, EN, IEC for ASEAN countries.

Requirements:

• Diploma in Electronics.
• Ability to conduct presentation for internal customers and management.
• Experience in security system testing preferred
• Exposure to alarm systems, CCTV systems, and access control systems would be a plus

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities:
1. Oversee end-to-end project management for module construction, network setup, cabinet renovation, decommissioning, and miscellaneous cabling projects. Coordinate closely with the TPM (Technical Project Management) team and local operations teams to ensure timely project delivery.
2. Inspect and report on the progress of civil and infrastructure works at IDC (Internet Data Center) sites according to TPM requirements.
3. Manage project scope within a designated location, covering, but not limited to, preliminary project site surveys, logistics coordination, on-site cabling management, and network integration to ensure overall project timeliness and quality. During the project, you may need to participate in on-site engineering tasks for a certain duration.
4. Oversee project construction management across all data center locations within the region. Standard work hours are 5 days a week, 8 hours per day, with occasional short-term overtime due to project demands or unexpected situations.
5. Complete onboarding training, with a 3-6 month on-the-job training period after joining. Afterward, you will be responsible for managing all projects in the assigned area in cooperation with the Alibaba TPM team.

Qualifications:
1. Strong communication and problem-solving skills.
2. Over 3 years of experience in data center construction or on-site operations; prior experience with Alibaba Data Centers is preferred.
3. Project management experience; PMP or equivalent certification is a plus.
4. IT background with familiarity in network architecture, servers, and fiber optics is preferred.
5. Fluency in both English and Chinese; proficiency in the local language is advantageous.
6. Willingness to commute to multiple sites within the region; a local driver’s license is preferred.

Service Engineer (Chiller / Air-handling Unit)

Job Info:

• Basic $3500 - $4000 + VB
• 5 Days, Monday - Friday 8.30am - 5.30pm
• Location: Ang Mo Kio

Responsibilities:

• Attend to customer enquiries and complaints, including on-site calls
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Assuage dissatisfied customers with prompt resolutions for any product or service issues
• Provide guidance and technical assistance to service teams and sub-contractors on service assignments, testing and commissioning; verify and prepare payment to sub-contractors
• Remain actively involved in the implementation of department strategies and initiatives such as service value-chain businesses
• Update Service information system and follow up with all necessary paper work diligently, timely and accurately for smooth operation of the department

Requirements:

• Diploma/Degree in Mechanical Engineering
• Minimum 2 years of technical experience with knowledge in air conditioning, Chiller, ACMV or HVAC systems

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5

• Permanent role with an established company
• Exposure to wide range of technologies including cloud

About the company

Our Client is an established company within their industry. They have a well-established presence of more than 20 years with a global footprint of more than 5 countries. With rapid expansion plan, they are now looking for a .net Software Engineer to join their team.


About the job

Reporting directly to the Head of Software Development, your responsibility includes:

• Develop and maintain web/mobile applications and microservices.
• Collaborate closely with vendors, business users and project team for
• applications requirement gathering and development.
• Provide user support for key applications.
• Manage IT projects.
• Evaluate and propose suitable alternatives for software architecture, designs and implementations.

Skills and experience required

As a successful applicant, you will have at least 3 years of experience in C# / .net core. Experience to .net core is required for this role.

Candidates with exposure to cloud, devops, Angular, Vue or React will be of added advantage

Whats on offer
This is an excellent opportunity to join an established end user environment with exposure to latest technology.

To apply online please use the 'apply' function, alternatively you may contact Hoon Teck TAN at https://www.linkedin.com/in/hoonteck-nologyrecruitment/. (EA: 94C3609/ R1219669)

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5 (EA: 94C3609/ R1219669)

We are a forward-thinking GPU DEPIN (Decentralized Physical Infrastructure Network) company focused on revolutionizing decentralized infrastructure for AI. Our mission is to build secure, scalable, and accessible compute resources to support the growth of AI in a decentralized ecosystem.

We are seeking a Lead Blockchain Engineer with extensive experience in designing and implementing large public blockchain networks. This role will take ownership of our blockchain architecture and play a critical role in shaping the underlying protocols that drive our decentralized infrastructure. As a lead, you will guide our team in building a resilient, secure, and scalable network.

• Lead the end-to-end development of our public blockchain network, from design through to deployment.
• Architect scalable and secure solutions, establishing protocols and consensus mechanisms for robust network performance.
• Collaborate with cross-functional teams to integrate blockchain capabilities seamlessly within our decentralized systems.
• Provide technical leadership, mentorship, and direction to the blockchain engineering team, fostering a culture of innovation and excellence.
• Stay ahead of industry trends to ensure our infrastructure remains at the forefront of decentralized and blockchain technology.

• Bachelor’s or Master’s degree in Computer Science, Blockchain Technology, or a related field.
• Proven experience in a lead role, with a successful track record in developing and scaling large public blockchain networks.
• In-depth knowledge of blockchain protocols, consensus algorithms, and cryptographic principles.
• Strong leadership skills, with the ability to inspire, mentor, and drive engineering teams toward successful project outcomes.
• Excellent problem-solving and analytical skills, particularly with a focus on security, performance, and scalability

• Competitive compensation, including tokens and performance bonuses
• A remote-first work culture with flexible scheduling
• Unparalleled growth opportunities in an emerging tech domain
• A collaborative, forward-thinking team environment focused on innovation and impact

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

[Order ID: 740076]

Responsibilities :

• Manage and support on hardware and software components pertaining to a Network infrastructure, including operating systems, routers, switches, firewall, wireless, SDN as well as office IT related matter etc.
• Standby work might be required (24/7), Maintenance ad-hoc related tasks

Administrative Support

• Routing protocols
• LAN switching Bridge ID, STP, LACP, Vlan and Vlan routing
• Wireless access and authentication
• Firewall rules and policies
• Configuration backup and documentation
• Monitoring and analysis

Technical Support

• Call response and support within service level agreement
• Incident / problem troubleshooting, fault clarification and isolation
• Provide workaround and/or resolution
• Communication and reporting
• Vulnerability / security update and firmware patch
• Firmware upgrade

Requirements :

• 3-5 years of experience in network infrastructure
• CCNP Certification
• Willingness to be on standby as needed (24/7 availability, with standby allowance provided)
• Good knowledge, troubleshoot and hands on experience in WAN and LAN technologies (SD-WAN, MPLS, VOIP, WAN Optimizer)
• Routers and routing protocols
• Layer 2 and 3 LAN switches
• General and Next-Gen firewalls
• On-prem / Cloud based wireless controller and access points
• Cisco Unified communication & IP telephony technology (a plus point)
• Cloud - Azure and AWS networking
• Network security solution such as firewall, CPE based IPSec VPN solution, token based authentication solution, IDS, data encryption and PIN verification

Please include the following for us to conduct an effective job matching for you: Earliest availability date/ notice period
Expected & Last drawn salary

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Victoria Loh Jie Li
EA Personnel Reg. No.: R1330197
EA Licence No.: 07C5771

Requirements :

• Must have plant shutdown/turnaround work exp.
• Must know Primavera 6, able to use Microsoft Project, ,developing S-Curve Schedule, bar-charts and manpower histogram.

To Apply:
Please send your latest CV in word file to [email protected]
Kindly indicate your availability, current and expected remuneration package.
We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)
Registered EA Personnel (Reg. No.:R1551322)

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description

• Oversee ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Oversee project coordination, ensuring project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Perform other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Able to work in Tuas area.

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Curation of SEA food datasets including samples images and recipes
• Training of the model with food datasets
• Experiment setup for user studies

• Minimum bachelor's degree in computer science, Information Technology, Information Systems or closely related disciplines from a reputable institution of higher learning
• Good knowledge in AI and generative AI
• Good skill in computer programming
• Good knowledge in dataset curation, including web crawling of images and recipes, data cleaning and preparation of dataset for deep learning
• Knowing at least one of the following Southeast Asia languages: Malay, Tamil, Indonesian, Thailand, Vietnamese, Filipino, Burmese.
• Self-motivated individual who can work independently as well as collaboratively in a team to engineer challenging problems

#LI-JN2

As a Senior Backend Engineer specializing, you will be responsible for designing, developing, and maintaining backend systems that support the integration and optimization of AI models & LLM in trading applications. You will work closely with the AI engineering team to integrate various machine learning models and algorithms into the backend systems to address business needs, ensuring high availability and low latency.

Key Responsibilities:

• Design, develop, and maintain backend systems and services that support AI models, ensuring high availability and low latency
• Integrate machine learning models and algorithms into backend systems for recommendation systems, predictive analytics, and other business applications
• Collaborate with frontend engineer, AI engineer and other stakeholders to identify business problems and design backend solutions
• Develop efficient APIs, ensuring high standards of performance, reliability, and security
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Document system design and API specifications to foster collaboration and transparency

Qualification & Skills:

• 4+ years of professional experience as Backend Engineer
• Proficiency in Python/ Typescript
• Strong understanding of database systems, including both SQL and NoSQL, and web development frameworks
• Solid experience in complex system design or architecture building.
• Familiarity with API design principles and best practices.
• Familiarity with caching mechanisms and cache invalidation strategies.
• Experience with cloud infrastructure, preferably AWS or GCP.
• Strong problem-solving, communication, and interpersonal skills.
• Passionate about AI/ML, with a keen interest in LLM technology.

We offer a competitive salary that is commensurate with the experience of the successful candidate

Job Description:

• Review technical specifications/drawings from client;
• Coordinate internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are met and meet project schedules;
• Develop cost estimates for equipment and works.
• Prepare technical submissions and liaise with client/project consultant for submission approval;
• Ensure technical requirements defined in the contract are properly incorporated in the project deliverables;
• Handle and resolve all site technical relating matters.
• Support on the testing and commissioning work.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Assist the Managers in engineering co-ordinations and in administrative duties (management of sub-contractors / vendors, etc.);
• Perform other Duties assigned by the direct supervisor

Requirement

• Bachelor Degree in Electrical / Mechanical / Chemical / Civil/ Building Structure/ Environmental Engineering
• Team player with good interpersonal skills.
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Proficient in Microsoft Office

Micron Packaging R&D group is looking for highly talented individual for Wire Bond Process to develop innovative solutions for the Multi Chip Memory IC Packages.

Job Responsibilities

• Provide leadership in wire bond technology, problem analysis and resolution
• Develop and Transfer wire bond process for IC Package process technology (Wire Bond) for multichip memory packages
• Process Development & Characterization, Qualification, and production pilot run
• Work with multi-functional team to characterize new Silicon technode and develop assembly packaging/recipe solution for products requirements
• Define, plan and implement technology roadmap to meet wire bond packaging roadmaps
• Qualify and transfer packaging technology to production site
• Collaborate with other functional groups both locally and globally to develop wire bond solutions to meet the packaging business needs
• Showcase and build organization reputation by publishing technical papers and submit invention disclosures.

Job Requirements

• PhD/Masters’s Degree in Materials, Chemical, Mechanical, Electrical & Electronic Engineering
• At least 5 years of experience in semiconductor wire bond engineering
• Good analytical and problem-solving skills, such as using Design Of Experiment and structured problem solving tools
• Self-motivated, able to work independently and self-initiative personality
• Possesses good communication skills, interpersonal skills and ability to work with global multi-functional teams

Keen on the role? Apply with us now!

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Location: Jurong Pier (Transport pickup from Lakeside)

Salary Rage: Up to S$4,000 + AWS + VB

Working hours : 8.15am – 5.30pm (Mon-Thurs)/ 8.15am – 5pm (Fri)

Responsibilities:

• Support in the maintenance of Safety, Quality, Environmental, and Health Management Systems such as ISO 9001, ISO 14001, ISO 45001
• Support in the implementation of IATF 16949 quality standards.
• Ensure IATF core tools are effectively established in quality assurance process in compliance with IATF 16949 standards.
• Analysis of quality data to identify potential systemic issues & initiate improvements.
• Conduct internal audits, identify non-conformances, and lead corrective actions to ensure ongoing compliance with ISO and IATF standards.
• Other ad hoc duties assigned.

Experience & qualification

• Diploma or Degree in Manufacturing/Mechanical Engineering/Quality or equivalent
• Minimum 3-4 years relevant experience
• Proven experience in Quality Assurance (preferably in manufacturing environment).
• Strong knowledge and ability to apply core tools under IATF 16949 requirements.

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Responsibilities

• Provide technical support to end-users on various technical issues and problems relating to hardware and software as well as network connectivity in the organization (e.g., desktop/laptop computers, printers, scanners and Smart Phones) and software such as Microsoft Office and emails.
• Setup and deploy new desktop / laptop computers and the associated software, including Windows Active Directory (AD) administration.
• Support service request and incident management to provide quality end-user services.
• Perform ad-hoc root cause analysis and problem resolution.
• Ensure and follow standard IT service delivery processes in accordance with IT policies and procedures.
• Develop checklists for typical problems.
• Assist his/her immediate supervisor in the definition methods for issue resolution and prevention.
• Perform other duties as assigned.

Requirements

• Diploma in Information Technology, Computer Engineering or equivalent, with at least 1 year experience and have handle VIPs experience.
• Proficient with Windows operation systems, M365, Anti-virus software and etc.
• General technical troubleshooting on IT hardware and software products (Desktops, Laptops, Printers, Audio, Projectors & etc)
• Handling incident tickets from end user for IT matters.
• Experience in supporting Microsoft Active Directory and DHCP will be an added advantage.
• Possess excellent interpersonal skills, resourceful, analytical, problem-solving and communication skills.
• A motivated person with the ability to work independently, a good team player and goal oriented individual.
• 5 days from 830am to 530pm, Bedok.
• Job Reference: LRW46496

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De