• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

1. Degree / diploma in civil engineering / structure engineering.

2. ⁠Able to use autocad.

3. ⁠Coordination drawing.

4. Take charge of overseeing projects.

5. Collaborate with contractors and project managers.

6. Track and report on project progress.

Salary based on experience

***No agents are required for this job posting***

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Originate and close opportunities to develop new market segments, product groups and
• channels.
• • Identify and canvass new sales opportunities and market through prospecting.
• • Provide pre and post-sales support to customers.
• • Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Manage the assigned accounts in a professional and efficient manner, consistent with good technical sales practice;
• To establish and execute a customer contact plan that will ensure the level of service and technical follow up needs and inquiries are properly and promptly addressed.
• Continuously identify sales opportunities within assigned territory or market segment.
• Develop shipping network and strategy to drive new business and client development in marine industry.
• Promote and develop the company’s product and services incorporating customers feedback and requirements.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Perform market research surveys amongst customer base to seek feedback on sales and service techniques, follow-up methods and quality of after sales service.
• Cultivate and enhance long term relationship with new and existing customer and build a strong client relationship and grow accounts to their maximum potential.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Maintain teamwork by incorporating positive attitude.
• Perform weekly & monthly simple sales report for review and implementation.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 2 years in marine industry.
• Is a strong networker and to-the-point communicator who is managed to build and maintain a solid internal and external network.
• Outgoing personality with good communication and interpersonal skills
• Aggressive, enthusiastic, and result oriented.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.
• Possess own car is an added advantage.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· Minimum 3 years of relevant working experience in building industry preferred

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

· Good track record in project sales and large tender preparation

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· 3-5 years of relevant working experience

· Lighting experience is not necessary but would be an asset with experience in lighting control

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

The Swiss School in Singapore (SSiS) is a bilingual school (German-English and French-English) officially recognized by the Swiss Confederation. Around 240 children (between the age of two and twelve) are currently attending the SSIS. SSIS is embedded in the tropical landscape of Singapore, away from busy roads and designed as a learning oasis. We stand for a high-quality educational offer with the aim of enabling our students to learn independently and creatively.

SSiS is looking for a dedicated and experienced IT Engineer to primarily support the school in the area of the Microsoft 365 platform. In this role, you will be responsible for managing, maintaining, and optimizing our Microsoft 365 environment, other school management software, as well as IT devices and systems used in the school, to ensure smooth and efficient IT operations.

Your Responsibilities:

· Management of the Microsoft 365 platform, including Office applications, Teams, and SharePoint for staff.

· Efficient license and user management, including the setup and management of user accounts and access rights.

· Provision of IT support and troubleshooting for hardware and software issues.

· Management and maintenance of IT devices such as computers, tablets, interactive whiteboards, and other technical teaching aids.

· Monitoring of network and system infrastructure.

· Planning and execution of IT projects in collaboration with other departments.

· Monitoring, development, and implementation of IT security policies and procedures.

· Support in the implementation and training of new technologies and software for teachers and students.

· Monitoring compliance with data protection and compliance regulations, specifically in the educational sector.

· Coordination and collaboration on IT matters with the school management, internal school departments, as well as service providers and partners of the school.

Your Profile:

· Bachelor’s degree in information technology. computer science, or related field.

· At least 2 years of professional experience in managing Microsoft 365 and end-user devices in Intune.

· Experience in setting up and managing cloud services in Azure.

· Strong problem-solving skills and experience in IT support.

· Knowledge of network and system administration.

· Experience in IT project management.

· Excellent communication skills in English, German and/or French.

· Ability to work as part of a team with a high level of self-initiative.

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

• Responsible for testing, operate and maintain automated machinery
• Involve in developing and implementing Logistics System, improvement upgrades, maximize efficiency, control maintenance costs and reduce downtime.
• Prepare project materials, cost analyses, estimate yearly retrofit budget and Spare parts management.
• Train the maintenance staffs for new work methodology, observe teams Safety requirements and provide necessary instructions.
• Maintain the reliability and the performance of the all automation and networks systems in the automation layer.
• Utilize equipment Error logs, Event reports, and analysis data from computerized maintenance systems to track equipment reliability.
• Daily checklists review, records equipment PM Work on internal and external service teams.
• Maintain liaisons with other departments to provide necessary support and assist regular MOM PE inspection.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting with minimum guidance

• Diploma/Degree in Mechatronics, electrical engineering, mechanical engineering or similar field.
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware. Knowledge onAuto CAD, Microsoft PowerPoint and Operation System knowledge will be preferred.
• Experience with automation equipment such as Conveyors, Lifter, ASRS. Food Procession machines and robotics systems.
• Skills on the electrical testing equipment, dB readings, Inverters settings, Calibration.
• A highly motivated, self-starter with the ability to work under pressure and Cold Room environment in order to complete the daily Operation functions. ie, Ensuring 24-7 Up running, fast moving technologies, new concepts, complex systems and operation timescales will influence your day-to-day work.
• Strong time management skills, self-motivated and able to complete Logistics Maintenance projects, repairs or troubleshooting.
• Hand-on troubleshooting expertise and attention to details.
• Strong leadership and problem-solving skills.
• Proven work experience in Industrial Automation System.

• Work location: 7 Sunview Road

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

You will be a key member in the Industrial Engineering team that is responsible for overseeing the entire supply chain process and ensuring that it is optimized to maximise efficiency and cost-effectiveness. This role will support the team in analysing and optimising warehouse automated systems to improve warehouse operations efficiency and capacity, as well as handle related continuous improvement initiatives.

Responsibilities

• Analyse, improve the process and systems within the supply chain, in a way that fosters collaboration, communication and continuous improvement to optimize the entire supply chain process.
• To articulate practical recommendations for business requirementsand demonstrating an ability to address pain points & issues.
• Engage and partner with key stakeholders and operators on automation projects to ensure successful implementations by understanding stakeholders requirements and vendor capabilities.
• Utilise industrial engineering principles to develop and implement best practices for warehouse operations optimisation.
• Conduct time and motion studies to identify bottlenecks inefficiencies and opportunities for improvement in the warehouse processes.
• Utilise data analysis tools and software to generate reports, analyse trends, and make data-driven recommendations for process optimisation.
• Provide training and support to operations on new processes, equipment and technologies to ensure successful implementation
• Any other adhoc duties and projects as assigned

• Bachelor's Degree in Industrial Engineering/ Automation or any other related field.
• Proven hands-on experience in industrial engineering, preferably in warehouse or distribution center setting
• At least 3 years of relevant experience
• Prior hands-on experience in modelling/simulation tool is desirable.
• Experience with time studies, methods/work study and/or other performance analysis methodologies.
• Good organizational, problem-solving, analytical mindset and skills, and able to collaborate with cross-functional teams
• Strong interpersonal and communication skills to engage with stakeholders from different hierarchy levels with the ability to drive achievement of objectives.
• Familiarity with safety regulations and best practices in warehouse environments.

• Work location: 7 Sunview Road
• Working hours: Monday - Friday, 8:15am - 5:35pm

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbents charge.

Responsibilities

• Support automation maintenance team in performing regular preventive/corrective/ predictive /conditions based / ad hoc / reliability centred based maintenance on storage systems, equipment, and packaging machines that would ensure optimal operation with minimal disruption to supply chains operation.
• Support Automation Maintenance Lead on complex diagnostics and repair malfunctioning complex logistics and packaging equipment.
• Support installation, modification, upgrade, and maintenance of storage systems and packaging equipment in project phase as team representative.
• Support automation team in maintaining industrial control systems for automated equipment ( Software / hardware)
• Deep Dive and Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.
• Provide engineering support for the modifications of robotic and automation systems.
• Work closely with operations and automation teams to ensure that all automation equipment and processes meet safety standards and comply with company policies.
• Support in prepare reports about system performance and breakdowns from technicians, for management.
• To be able to support Automation Maintenance Lead and technicians in identifying and resolving process related issues.
• Work with Team to formulate work instructions / safety risk assessment / Continuous improvement projects.
• Ability to calculate and identify bottlenecks in process flow to prevent bottlenecks and formulate backup plans with the operations team as a preventive measure.
• Any other ad hoc duties as assigned.

• Bachelor Degree
• 3 years+ experience in control engineer/ commissioning or 5 years+ after service
• Familiar with Siemens PLC
• Good at communication both written and oral
• Familiar with more than one WMS/WCS systems in the market
• Preference for those with supplier management experience (experience in guiding installation and debugging, renovations, etc.)
• Candidate must be comfortable with rotating shift work

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbents charge.

Responsibilities

• Support automation maintenance team in performing regular preventive/corrective/ predictive /conditions based / ad hoc / reliability centred based maintenance on storage systems, equipment, and packaging machines that would ensure optimal operation with minimal disruption to supply chains operation.
• Support Automation Maintenance Lead on complex diagnostics and repair malfunctioning complex logistics and packaging equipment.
• Support installation, modification, upgrade, and maintenance of storage systems and packaging equipment in project phase as team representative.
• Support automation team in maintaining industrial control systems for automated equipment ( Software / hardware)
• Deep Dive and Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.
• Provide engineering support for the modifications of robotic and automation systems.
• Work closely with operations and automation teams to ensure that all automation equipment and processes meet safety standards and comply with company policies.
• Support in prepare reports about system performance and breakdowns from technicians, for management.
• To be able to support Automation Maintenance Lead and technicians in identifying and resolving process related issues.
• Work with Team to formulate work instructions / safety risk assessment / Continuous improvement projects.
• Ability to calculate and identify bottlenecks in process flow to prevent bottlenecks and formulate backup plans with the operations team as a preventive measure.
• Any other ad hoc duties as assigned.

• Bachelor Degree is preferable
• Major in Mechanical or Mechatronics or Automation Control
• 3 years+ working experience in Integrator/ automation equipment manufacture/ warehouse automation project. Or 5 years+ after service experience in automation project
• Familiar with AutoCAD
• Familiar with device in automation
• Able to work on shift hours

• Work location: 7 Sunview Road