• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Engineer, System Engineering . This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Roles and Responsibilities:

· Plan, execute, monitor and control the various technical aspect of the project.

· Manage or participate in new setup or upgrade of system/network infrastructure projects.

· Responsible for supporting operational systems satisfying contractual Service Level Agreement

· Perform and manage routine preventive maintenance and operational activities

· Provide project documentation and reports

· Diagnose and rectify technical issue

· Managing and Operating Red Hat Linux, Windows VM Infrastructure

· Installation/Configuration/Hardening/Maintenance/Patching

· Maintain System Security

· Advanced Troubleshooting

· Performance Tuning

· Capacity Management

· Preventive/Proactive Support

· Incident/Change/Problem Management

· Provide system administration support and guidance for development team’s app configuration tasks

· Veritas Clustering Setup on RHEL VM would be added advantage

· Chef Automation would be added advantage

· AWS EC2 maintenance

· Managing and Operating VMware vSphere IT infrastructure

Other IT Infrastructure Related Tasks

· Red Hat Enterprise Linux (RHEL) and Windows Administration

· Professional understanding of networking related to RHEL and Windows

· Professional understanding of SAN Storage related to RHEL and Windows

· AWS Certified Solution Architect will be an advantage

· Good understanding of large Data Center Facilities operation

· Hands-On experience supporting various Infrastructure agents like NetBackup

· (Mid-Level) vSphere 7.x.

· Cross-team collaboration with storage, network, security and application delivery

· Technical leadership quality to handle technical challenge and sensitive situations

· Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

· Candidate should have the drive and intellectual horsepower to resolve

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Deepa Shivakoti

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Preferred 3 years of relevant work experience in Etch Equipment
• LAM & Oxide tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Monthly salary $4500 + $6000 + Variable Bonus

• Company located at Woodlands

• Monday – Friday: 8:30am – 5:30pm

• Excellent Welfare & Benefits

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Requirement

• Degree in Mechanical Engineering / Mechatronics or related disciplines
• 4 - 6 years of relevant experiences in automation equipment design
• Experience in factory automation / electrical, pneumatic, and sensor component selections is an advantage
• Proficient in SolidWorks 3D software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review
• Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits
• Coordinate with internal stakeholders to participate in customer or supplier audits for compliance
• Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement
• Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure
• Maintain and conduct regular review of calibration and preventive maintenance for equipment
• Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Mon to Fri 8.30am to 5.30pm

Job Purpose:

To help company manage the various key systems and develop integration strategy according to the company’s strategic IT direction.

Job Description:

1. Support Finance department to resolve and analyze issues with Dynamic 365 Finance.

2. Support Commercial team to resolve and analyze issues with billing system.

3. Support Operation team to resolve and analyze issues with ship operation system.

4. Manage and enhance existing 3rd party systems integration with Dynamic 365 Finance.

5. Help identify business requirements and develop solutions to address those requirements.

6. Help design, setup and maintain company centralized data vault, which is a key initiative to take ownership of company data.

7. Work with stakeholders to identify and develop integration mechanisms of 3rd party system with centralized data vault.

8. Provide recommendations to keep pace with technological advancement in Database technology.

9. Be the project leader for new system deployments.

10. Assist with daily IT support of ISD department.

Skills requirement:

1. Strong programming skills in SQL/MySQL, XML, XSLT, HTML/CSS, Java, JavaScript, JSON, php, and Python.

2. Has experience working in accounting system with basic accounting concept

3. Familiar with Microsoft Dynamic 365 environment

4. Familiar with Microsoft 365 – Power Platform

5. Familiar with Microsoft Azure environment

6. Familiar with Microsoft Server environment

7. Familiar with Microsoft Databases – SQL DB, Azure SQL database, Dataverse

Qualification:

1. University graduate or diploma in computer sciences related disciplines

2. Microsoft certification in Azure Database or SQL Database related disciplines

3. Min 5 years working experience with Database and application development.

4. Accounting software and business analysis experience is preferred

5. This role required to communicate with counter part in China

• Report directly to the Project Director/Manager overseeing the WTW system.
• Project Support: Provide technical expertise for the design, development, and construction oversight of the WTW system.
• Coordinate with WTW system designers, vendors, and fabricators, including reviewing drawings, sourcing equipment, and managing cost and schedule control.
• Project Execution: Lead project implementation to meet specified requirements and objectives. Responsibilities include schedule tracking, vendor sourcing and recommendations, cost assessment, resource allocation, addressing inquiries, clarifying technical aspects, supervising project activities, implementing corrective measures, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve issues in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Accurately document all changes, maintenance activities, repairs, and inspections.
• Develop operating, maintenance, and safety procedures for the WTW system.

Requirements:

• Bachelor's degree in Mechatronics or related field.
• Minimum of 5 years of experience in the marine industry or shipyard environment.
• Solid understanding of deck machinery, including winches, cranes, lifting and handling equipment, as well as familiarity with IACS rules and regulations (especially ABS, DNV, BV).
• Specific experience in WTW systems (Offshore Passenger Transfer System) is an advantage.
• Strong knowledge of mechanical principles, hydraulic and electrical systems, and P&ID, with proven troubleshooting skills.
• Strong leadership and problem-solving abilities, with knowledge of structural design as a plus.
• Teamwork: Demonstrated ability to work collaboratively with team members at all organizational levels.
• Communication: Clear and effective communication skills for interacting with team members, vendors, fabricators, and clients.
• Proven ability to write reports and deliver presentations in English, with Mandarin skills being an added advantage.
• Software Proficiency: Skilled in MS Office, MS PowerPoint, MS Project, Adobe, and AutoCAD. Familiarity with Primavera scheduling software is a plus.
• Solid knowledge of document control processes, with experience in ISO9001:2015 QAM systems being advantageous.
• Must be willing to travel and work in marine and offshore environments.

Key Responsibilities

1. Sales Growth:Achieve or exceed assigned sales targets for project-based and commercial furniture sales.
   Develop and maintain relationships with key decision-makers in corporations, architects, interior designers, and contractors.
   
2. Business Development:Identify potential new business opportunities in the commercial furniture market (e.g., corporate offices, educational institutions, healthcare, and government sectors).
   Conduct market research to understand trends and competitor activity.
   
3. Account Management:Manage existing client relationships to ensure satisfaction and repeat business.
   Provide tailored solutions to clients based on their needs, budgets, and timelines.
   
4. Project Management Support:Work with the design and project management teams to ensure smooth delivery of furniture solutions.
   Oversee post-sales activities, including installation, to ensure client satisfaction.
   
5. Presentation & Negotiation:Prepare and deliver compelling sales presentations, proposals, and quotations.
   Negotiate pricing and contract terms with clients while maintaining profitability.
   

Qualifications

1. Educational Requirements:Bachelor’s degree in business administration, marketing, or a related field.
   Alternatively, equivalent experience in furniture sales or a related industry.
   
2. Work Experience:3–5+ years of proven success in sales, preferably in commercial furniture or office systems.
   Demonstrated ability to consistently meet or exceed sales targets.
   Strong experience with project-based sales and working with B2B clients.
   
3. Skills:In-depth knowledge of commercial furniture products, solutions, and trends.
   Excellent communication, presentation, and interpersonal skills.
   Ability to develop rapport with clients and stakeholders across multiple industries.
   Strong negotiation and problem-solving abilities.
   Proficiency in CRM software and Microsoft Office Suite.
   

Preferred Attributes

• Existing network of architects, interior designers, and project managers in the commercial furniture industry.
• Familiarity with space planning and office design concepts.
• Experience handling large-scale projects for corporate, educational, or institutional spaces.
• Certifications in sales or knowledge of ergonomic and sustainable furniture solutions are a plus.

Compensation

• Competitive base salary (based on experience).
• Performance-based commission or incentives.

Charmaine Soh | Reg No.: R24122333

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

---

One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

RESPONSIBILITIES INCLUDE, BUT ARE NOT LIMITED TO:

• Develop HW microarchitecture, RTL design and verification for Expedera AI accelerators (Silicon IP)
• Explore HW design space power/performance/area optimization
• Collaborate with HW/SW architects in HW/SW co-design
• Execute with DevOps for quality assurance

REQUIRED QUALIFICATIONS AND EXPERIENCE:

• Bachelor's degree or equivalent in a relevant field such as electrical engineering, computer science
• Graduating Masters are welcome
• Familiarity with Verilog, Python, Linux

PREFERRED QUALIFICATIONS AND EXPERIENCE:

• SystemVerilog, Univeral Verification Methodology
• C++
• Git, Jenkins, Continuous Integration/Continuous Delivery, JIRA
• Machine Learning/Deep Learning
• GPUs, AI accelerators/NPUs, FPGAs

Job description:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma/ Degree in Engineering/ Science (Mechanical / Biomedical / Electrical)

• Min. 1 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities:

• Oversee distribution management for direct users and distributors.
• Drive revenue growth in the assigned territories.
• Achieve sales targets and develop plans to implement strategic business objectives aligned with the group's vision and mission.
• Proactively create new applications and communicate them to distributors.
• Collaborate with the Regional Team to provide monthly and quarterly updates on sales forecasts, budgets, sales generation, business development, and related reports.
• Utilize Salesforce as a forecasting tool to ensure accurate and well-maintained records of prospects and clients, while building a strong pipeline of opportunities.
• Support, quote, and negotiate prices, credit terms, contract agreements, and other specifications as needed.

Requirements:

• With 3 years of experience in industrial product selling.
• Exceptional customer service and presentation skills.
• Positive, dynamic and results-oriented

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R23117856

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

1. Developing and implementing mechanical designs and welding procedures for new products or product improvements.
2. Analyzing and troubleshooting mechanical and welding problems, and recommending appropriate solutions.
3. Conducting tests and experiments to validate designs and procedures.
4. Managing projects and coordinating with cross-functional teams to ensure timely completion of tasks.
5. Providing technical support to production teams and assisting with equipment maintenance and repair.
6. Mentoring and training junior technicians and engineers.

Requirements

1. Strong knowledge of welding processes, metallurgy, and welding standards.

2. Excellent problem-solving skills and the ability to work independently or in a team.

3. Good communication and interpersonal skills to collaborate with colleagues and stakeholders.

4. Familiarity with relevant regulations and safety requirements.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Marvell first revolutionized the digital storage industry by moving information at speeds never thought possible! Today, that same breakthrough innovation remains at the heart of the company's storage, network infrastructure, and wireless connectivity solutions. With leading intellectual property and deep system-level knowledge, Marvell's semiconductor solutions continue to transform the Enterprise, Data Center, SMB, Cloud, Automotive, Industrial, and Consumer markets. You will be solving new technical challenges alongside leading industry professionals in an open, creative environment with plenty of opportunities for personal / professional growth. Join our ambitious team within a multi-nation, multi-cultural company. Marvell develops leading-edge products within a unique high-tech environment that motivates & encourages continued learning and growth!

What You Can Expect

• Designing highly sophisticated CMOS transceiver/SERDES products.
• Implementation and verification of circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, CDRs etc. to meet key performance targets
• Performing design verification using industry standard tools such as Spectre, MATLAB etc.

What We're Looking For

• Master’s degree and/or PhD in Electrical Engineering and 3+ years of experience.
• The ideal candidate should have a deep understanding of analog mixed-signal design with experience in high-speed transceivers.
• Solid understanding and experience of designing analog mixed-signal circuit blocks including PLL, phase interpolator, low jitter clock distribution, Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, high-speed DACs and ADCs, Filters
• In-depth knowledge of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques
• Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE
• Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.)
• Familiarity with CDR architectures and implementations
• Design experience in advanced CMOS technologies, design with FinFet technology
• Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization
• Experience in lab testing of high-speed transceivers

At Alleviative Engineering Pte. Ltd.,

As we expand, we are searching for passionate and driven individuals to join our team as Site Engineers. If you thrive in a fast-paced, hands-on environment and are looking to grow your career with a forward-thinking company, we want to hear from you!

Why Join Us?

• Be Part of High-Impact Projects: Work on iconic projects, contributing to essential infrastructure in Singapore.
• Career Growth: Join a structured, results-oriented, and SOP-driven organization that fosters professional development and provides comprehensive training programs to support your career journey.
• Dynamic Work Culture: Be part of a supportive, innovative, and collaborative team that values continuous improvement and efficiency.
• Exciting Challenges: Step into a role where no two days are the same, with opportunities to take full ownership of impactful projects.

Key Responsibilities:

• Take full ownership of fire alarm and fire protection projects, ensuring they are delivered on time, within budget, and to the highest standards.
• Conduct detailed site surveys, plan routes, and design layouts for fire safety systems.
• Lead the installation of conduits, cables, devices, sprinkler systems, and other fire protection equipment.
• Manage and inspire site teams (workers, team leaders, and supervisors) to achieve project goals and meet key performance indicators (KPIs).
• Coordinate with Quantity Surveyors to ensure BOQs are accurate and aligned with site measurements.
• Collaborate with clients, consultants, and stakeholders to resolve challenges and maintain smooth project execution.
• Plan and allocate manpower, materials, and equipment to optimize project efficiency.
• Ensure compliance with SCDF regulations, local codes, and all relevant safety standards.
• Monitor project progress and implement corrective measures where needed.
• Prepare detailed reports on project status, milestones, and resource utilization for stakeholders.
• Act as the SME, providing leadership and technical guidance on-site.

Who We Are Looking For:

• Diploma/Degree in Engineering (Mechanical, Electrical, or related fields).
• 3-5 years of hands-on experience in managing fire alarms or fire protection projects.
• Strong technical knowledge of fire protection systems, codes, and regulatory requirements.
• Proven leadership skills with the ability to manage site teams effectively.
• Experience in system design, route planning, and material selection for fire protection systems.
• Proficiency in project management tools and reading technical drawings.
• Strong problem-solving, decision-making, and communication skills.
• Willingness to work night shifts, weekends, and under tight deadlines.
• A passion for learning, improving, and excelling in engineering/construction.
• A valid Class 2B/Class 3 license (preferred).

What We Offer:

• Career Advancement Opportunities: Grow with us as you take on challenging, high-profile projects and develop your skills in a structured environment.
• Training & Development: Access to comprehensive programs to enhance your expertise and support your professional growth.
• Collaborative Work Environment: Join a team that values innovation, efficiency, and continuous improvement.
• Prestigious Projects: Make a difference by contributing to critical projects that impact Singapore’s infrastructure and safety.

The AAA & Actuate developer will be responsible for the design of solutions for the upcoming changes to the existing as well as new assets/applications within the Services division.

This role is technology-oriented, which includes defining development methodologies, hands-on development for new projects/evolutions, production L3 (Developer level) support, providing technical solutions, and performing POC for new relevant frameworks available in the market.

Knowledge and experience in the Wealth Management (Private Banking) domain is a good to have. (Portfolio Analysis, Order Management, and Advisory functions).

Job Description:

• Perform Business Analysis, interacting with various business representatives
• Write technical specifications for developments done by technical teams (Unix, Java, TX maps)
• Do Triple A Core object development
• Do Actuate Reports development
• Prepare technical deliveries and support implementation by integration teams.
• Perform functional testing of PMS domain systems (formalization in ALM System)
• Propose solutions and improvements
• Contribute to key and strategic projects
• Contribute to Support Activities
• Perform Project Management activities
• Perform quality reporting and controls in line with the Teams QACMP
• Applications managed by the team: Triple A core objects, Triple A data model, functional asset unicity

Job Requirements:

• Bachelor’s Degree or equivalent experience required
• At least 5 years of experience in the private banking or asset management industry
• At least 5 years of experience in IT Development activities
• Excellent communication skills in English, both oral and written
• Previous exposure on Odyssey's Triple'A system is a must
• Minimum 3 years of experience in Triple’ A Scripting and system setup
• Minimum 3 years of experience in Actuate
• Minimum 2 years of technical experience in Oracle/Sybase, Shell Scripting, Quality Assurance / Project Management process, System Testing
• Knowledge of process methodology
• Experience of business support in a Wealth Management organization
• CFA, PMP, Business Analyst certifications are a plus
• Singapore Citizens are highly preferred

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The school plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The school’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

We're hiring a Full-Stack Software Engineer for a short-term role to develop a software that employs artificial intelligence to manage ship and crew risks.

Key Responsibilities:

• Develop new software or enhance existing platforms to connect with multiple devices (e.g., smartwatches and tablets) and databases (e.g., AIS and weather data).
• Design and implement systems to monitor and control ship risks and enhance seafarer wellbeing.

Job Requirements:

• Education Qualification: Degree in Software Development and Engineering or equivalent
• Key Computing Skills:
  Proficiency in JavaScript or TypeScript (preferably TypeScript).
  Experience with Node.js.
  Competence in React.
  Knowledge of SQL databases (e.g., PostgreSQL, MySQL, or MariaDB).
  Knowledge of NoSQL databases (e.g., MongoDB, CouchDB, or Redis).
• Interpersonal skill
  Ability to work independently and develop solutions under strict timelines
  Meticulous attention to detail, with excellent organisational and time management skills
• Strong written and oral communication abilities
• Familiarity with the maritime industry is an advantage

We regret to inform that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.