Job Description:

- Follow installation policies and procedures of devices

- Utilise the correct consumables and hardware

- Ensure that tracking device is installed properly according to the standards

- Effectively communicate with schedulers

Job Requirement

- At least 1 years’ experience. (Preferred)

- Good to own a bike and a valid driving license

Kindly whatsapp Jay at 84379353 / wa.me/84379353, attach your CV and stated the below information:

Quote:

TECHNICIAN Name:

Area Staying:

Commitment Period:

Current status: Unemployed/Student/Working

Thank you.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Responsibilities:

Ability to source for supplies and quotation for tendering.

Evaluation of price comparison and costing summary.

Taking off quantities for tender.

To assist in tender documentation/cost tabulation.

Provide support in any other adhoc duties as assigned from time to time.

Requirements:

• Degree or Diploma in Quantity Surveying or Building.
• Minimum 2 years relevant experience in construction.
• Entry level candidates will also be considered.
• Proficient in MS Office.
• Able to work independently with minimum guidance and under pressure to meet tight deadlines.

Join GSK Process Technician Apprentice Programme – Singapore - 2025: Help us get ahead of disease together

GSK Apprenticeships are full-time entry level opportunities that offer ITE graduates the opportunity to begin their career while studying towards a Work-Study Diploma in Chemical Process Technology fully funded by GSK.

Prior Education requirements: Nitec in Chemical Process Technology (GPA>2.0) OR Higher NITEC in Chemical Technology OR Higher NITEC in Biotechnology, Fresh ITE graduates within 5 years of graduation or ORD.

Language requirement: Written and spoken fluency in English

Other requirements:

• If offered a position the candidate must be willing to enroll, and meet entry requirements, with the partnering educational institution, in the preferred related instruction course
• Must be able to commute daily to the GSK manufacturing facility and to the education institution when required for classes

Start date: January 2025

Application deadline: We recommend you apply as soon as possible. We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Are you looking to gain a head start in your career where you can help positively impact the health of billions of people? Apply for the Process Technician Apprentice Programme today!

We are looking for highly motivated ITE graduates with an interest in science and engineering who are looking to kickstart their career in the pharmaceutical industry. The apprenticeship programme allows you to develop hands-on technical skills while continuing your education.

Working at our pharmaceutical manufacturing site, you will help to ensure we have the latest, safe, efficient, and reliable processes and equipment to deliver life-saving medicines and vaccines to people in 90 % of the world’s countries. This role will enable you to develop your skills in an industry that’s making radical changes to the way it develops and manufactures products.

Ahead together with tailored training and career development

This entry-level development opportunity offers you the chance to study towards nationally recognized qualifications while gaining hands-on, paid on-the-job training. Our apprentices will take up studies towards a Work-Study Diploma in Chemical Process Technology while working at a GSK Pharmaceutical Manufacturing facility in Singapore.

You will spend time working in our manufacturing facility learning how to operate and maintain the different equipment and utility systems that support our pharmaceutical production from our in-house industry experts . You will learn safety and risk management to ensure all equipment is operated safely and efficiently.  Over the 30 months of the apprenticeship, you will have a personal training programme to help you develop and progress.

What will you do?

As a process technician apprentice, you may get involved in the following activities:

• Learning how to operate equipment in the manufacture and packaging of our pharmaceutical products
• Supporting the operation of solvent recovery and effluent treatment processes that support manufacturing processes
• Supporting routine preventive maintenance activities
• Get involved in project activities
• First touch engineering - root cause analysis and solving breakdowns
• Data collection, analysis and trending to identify improvement opportunities and implementation of change
• Assisting in new product and equipment introductions
• Ensuring quality, safety and accuracy in all that we do

What do we offer you?

• A competitive salary
• An annual bonus based on company performance
• Access to healthcare and well-being programs
• Employee recognition programmes, which reward exceptional achievements
• On-the-job experience and formal and informal training and development, delivered through a mixture of coaching, mentoring and formal training programmes
• Fully funded next level education!

Apply now: https://jobs.gsk.com/en-gb/jobs/402355?lang=en-us&previousLocale=en-GB

We want GSK to be a workplace where everyone can feel a sense of belonging and thrive as set out in our Equal and Inclusive Treatment of Employees policy. We’re committed to being more proactive at all levels so that our workforce reflects the communities we work and hire in, and our GSK leadership reflects our GSK workforce.

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

#ApprenticeSG

#ManufacturingApprenticeSG

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Addcel has been delivering deep value to clients across Pharmaceutical, Data Centers, Semi-con and Oil & Gas industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

As a Maintenance Technician with Addcel, you will be responsible for:

• Performing preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensuring completion of all preventive and corrective maintenanc, documenting all service reports from vendors
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usgae
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involved in internal and external audits when required
• Any other duties as assigned

A successful candidate for this role will possess:

• Higher Nitec/ Diploma in Electrical/ Mechanical/ Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands-on experience in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Physically fit and able to work at height with MEWP
• Able to support after office hours and weekends when needed
• Well versed in Microsoft Office applications
• Able to read and interpret schematics

The position holder is responsible for maintaining and servicing a range of well-known diesel generators ranging from 10KVA to 4MW and both HT and LT generators. Reporting to your team Senior Service Tech or Team Senior Service Engineer / leader

Key Tasks:

• Carry out fault finding and diagnosis to a range of diesel generator sets.
• Resolve electrical and mechanical engine problems
• Replacing electrical and mechanical components
• Carry out Full engine servicing
• Carry out site testing, inclusive of load bank testing for both HT and LT generators
• Customer liaison, update and ensure complete customer satisfaction.
• Good housekeeping of both customer sites and company vehicle
• Adhere to company health & safety standards

Requirements

Education

• Minimum Diploma/ITC/NTC in Mechanical or Electrical Engineering - LEW an added advantage
• SEC/SEC (K) Certificate if applicable

Knowledge / Experience / Others

• Previous experience working on Diesel Generators
• With minimum 3 years hand on experience on Diesel Generators
• Completed an apprenticeship in Mechanical Engineering / Electrical Engineering / Diesel or Plant Fitting, or have a relevant qualification in one of those courses.
• Ideally strong knowledge of diesel generators such Cummins / Volvo / Perkins / Mitsubishi / John Deer / Droman / Deutz and any other brands
• Possess a valid Singapore driving license .

Personal Competencies

• Able to use own initiative as well as working as part of a team
• Good customer service and communication skills

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

*Location at SATS(those in east side welcome to apply)*

*Training provided*

*Fresh grads are welcome*

The Job:

• To provide preventive maintenance and repair on material handling equipment within a specialized or technical field
• Identify and analyze technical issues through bsystematic troubleshooting methods
• Perform repairs on faulty components, following established procedures and safety guidelines
• Maintain accurate records of maintenance activities, repairs, and equipment history
• Attend ad-hoc jobs as assigned

The Person:

• Diploma or relevant in Mechanical/Electrical Engineering or equivalent
• Must possess class 3 driving license
• Proven experience as a Technician in the relevant field
• Technical knowledge in electrical system, basic engine, and hydraulic system
• Basic IT knowledge
• Able to interpret complex electrical circuit diagrams and problem-solving skills

Utilities Technician

Location: Pioneer, Singapore

Reporting to: Site Engineering Manager

As the Utilities Technician, you will support site operations including production activities by operation of utilities equipment and electrical installation; and perform maintenance and troubleshooting activities to ensure optimum uptime of the equipment. In this exciting role, you will also:

Main Responsibilities

• Support to daily monitoring, operation and maintenance of Building Management System, Utility Equipment (including compressed air system, process water, waste water system, HVAC, cooling tower and chiller) and electrical installation.
• Perform corrective and preventive maintenances for the utilities equipment (e.g. pumps, agitators, valves) to minimize down time.
• Work with engineer to set up maintenance plan (preventive and predictive) for the Utility equipment and Electrical installation.
• Identify and estimate the resources (workforce, material and time) required for forthcoming / planned maintenance tasks
• Assist engineer in equipment troubleshooting, enhancements and utility line setup.
• Assist engineer to do improvement and monitor performance of equipment for optimization of equipment functionality
• Troubleshoot and repair Utility equipment and Electrical installation safety
• Coordinate with vendors/contractors for equipment maintenance and repairs
• Look for shortfalls in quality and quantity on daily tasks and work on small improvements
• Support and attend to daily ad hoc request with regards to maintenance
• Keep track of equipment spares and work with maintenance planner to replenish the spares upon depletion
• Attend to off-office hour call back to repair equipment breakdown
• Plan, organize and oversee work performed by in-house contractor and external contractor engaged for maintenance work.
• Learn safety policies and guide external contractors on site requirements
• As authorized permit to work applicant
• Good record keeping in all involved tasks relevant data in SAP

Academic Background

• NTC/ITC/Diploma in Mechanical or Electrical background
• 4 or more years of experience in maintenance
• Preferably with experience running of utilities and/or electrical installation.

Technical Skills

• Familiar with basic SAP Plant Maintenance function (module)
• Knowledge of EHS rules and guidelines.
• Good coordination skills with contractors/vendors
• Interpret P&ID and mechanical/electrical drawings

The Technician supports the execution and maintenance of safe and reliable plant operations.

Job Description:

• Carry out blending process operations, perform filling of blended products into drums and isotainers in a safe and efficient manner.

• Carry out chemical additives transfer between bulk packages (tank farm storage tanks, marine vessel bulk) and smaller packages (isotainers, IBCs and drums).

• Control inventory (physical & documentary aspect), including tank gauging & sampling.

• Conduct line pigging and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.

• Manage isotainer and storage tank heating in a safe manner.

• Operate plant air compressor, steam boilers, hot oil furnace, pumps, heat exchangers, rotary equipment etc. in a safe manner.

• Carry out minor maintenance work, 5S improvement projects and energy conservation initiatives.

• Adhere to all in house safety, security, industrial hygiene standards and HSES & Quality regulations.

• Able to handle forklift equipment, training will be provided.

• Perform any other production duties assigned by the Operations Superintendent.

Requirements:

• Minimum NITEC in any Engineering or Technical field.

• Minimum experience equivalent to 2 years in a manufacturing environment.

• Prior technical experience in chemical company or prior working experience in a lubricant blending company would be an advantage.

• Able to perform night duty when required.

• Good technical skills in handling rotary equipment & pipeline operations.

• Basic knowledge in Microsoft Office Excel, Word, etc.

RESPONSIBILITIES:

• Perform installation work/service work at the customer site.

• Provide on-site technical assistance to the Senior Technician / Service Engineer.

• Possess a Class 3 driving license during servicing if required.

• Preparation/maintenance of ES batteries in warehouse/site work etc. as per company SOP.

• Packing/delivery/installation of batteries according to schedule by senior technician / Service Engineer.

• All activities required by superiors.

The technician shall possess the following competence:

• Simple inventory management skills.

• Ability to prioritize tasks & able to adhere to company SOPs

• Able to carry out tasks professionally and keep to the service schedule as per superiors/customer instruction.

• Safety-conscious

• Candidate must possess at least an "O" Level with experience or equivalent / ITE – Electrical / Electronic.

• Preferred with 1-2 Years of working experience in the related field.

• Preferably Non-Executive specialized in Engineering - Others or equivalent.

• Must possess a Class 3 driving license. A forklift license is preferable but not a must.

• Able to do OT when required.

• Working Hours: Monday - Friday 0830hrs to 1700hrs

• Work Place: 14A, Joo Koon Circle (Nearest MRT: Joo Koon MRT station)

Position Title: Apprentice / Print Finishing Technician

Job Responsibilities:

• To perform support role for several areas in Binding and finishing day-to-day activities
• Perform production duties such as manual lifting, packaging, taping, labeling operations and sorting
• Report defective materials or questionable conditions to the department supervisor
• To ensure materials and products are in order and packing specifications are met
• To maintain 6s housekeeping
• To comply Safe Work Procedures (SWP) and adhere to safety in work station/area
• To carry out tasks assigned by immediate superior

Job Requirements:

• 1 year working experience in fast pace
• May involve some repetitive motions
• Understanding and follow basic verbal and written instructions
• Good time management

Markono is committed to fostering and cultivating a diverse and inclusive workplace. We believe that a diverse workforce is needed to drive innovation, grow, and succeed in today’s corporate climate. We recruit and select employees on the basis of merit (such as skills, experience or ability to perform the job), regardless of nationality, age, gender, marital status, pregnancy status, caregiving responsibilities, race, religion, language, disability and mental health conditions. Join us and thrive!

Responsibilities

• Carry out analysis and application studies in the area of polyurethanes using laboratory equipment such as potentiometric titrations, gas chromatography, FTIR, Karl-Fischer, AAS, and universal testing machine.
• Carry out technological evaluation of finished products using technological equipment and able to reproduce the customers' application processes.
• Calibration and maintenance of laboratory instruments.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by superior.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology or equivalent.
• Preferably 1 to 2 years of relevant experience in chemical/ petrochemical industry.
• On-the-job training will be provided.
• Good laboratory knowledge and methodologies.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.
• Ability to prioritize tasks based on urgency.
• Able to work under fast-paced environment.
• Candidate must be willing to work in Jurong Island

Job Description:

• Production: Deliver product at the required time, quality, and cost
• Process: Follow the defined workflow and procedure
• Installation: Install and maintain electrical systems and equipment. This includes wiring, lighting fixtures, circuit breakers, transformers, motors, generators, and other electrical components.
• Wire harness and Cable crimping
• Building Power Distribution Box
• Planning: Follow the manpower allocation, material and production schedule
• Documentation: Follow the work instruction, work process, and safe work procedure in your manufacturing process
• 5S & Safety: Comply and perform existing 5S & Safety practices and standards at the workplace
• Preventive Maintenance: Perform simple equipment preventive maintenance

Requirements:

• Minimum NITEC or Higher NITEC or Diploma in Engineering or equivalent
• Minimum 1 year of experience as Electrical Technician
• Only Singaporeans
• Basic understanding 2D and 3D mechanical drawing
• Able to execute correct repair or rework on defective product
• Able to communicate in verbal and written English
• Willing to learn new skills
• Willing to work overtime, if required (OT pay & meal will be provided)

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Assist in product validation and qualification activities during the NPI stage
• Perform product functional testing based on the test plan and work instruction
• Ensure on-time completion of all assigned product validation according to the schedule
• Perform defect identification and defect diagnosis
• Report valid and accurate test results to the engineer
• Participate in initial test setups and test preparation
• Participate in defect troubleshooting and root cause analysis
• Assist in maintaining test equipment

• Diploma in Electrical/Mechanical Engineering or relevant studies
• Minimum 1 year of working experience in the manufacturing industry
• Experience in equipment, sub-module, and machine assembly will be advantageous
• Proficient in Microsoft Office applications

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Run chamber tests, including periodic removal of items for verification and re-entry to the chamber for continued testing.
• Changeover jigs and fixtures to accommodate testing of different assemblies.
• Compile and document test results accurately.
• Oversee maintenance of chambers, jigs, and fixtures.
• Support ad-hoc tests and experiments as needed.
• Assist with overall lab management.

• Diploma in Electrical/Mechanical Engineering or relevant studies.
• Minimum 1 year of working experience in Mechanical or Manufacturing Production related field.
• Troubleshooting skill knowledge will be an advantage.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Run chamber tests, including periodic removal of items for verification and re-entry to the chamber for continued testing.
• Changeover jigs and fixtures to accommodate testing of different assemblies.
• Compile and document test results accurately.
• Oversee maintenance of chambers, jigs, and fixtures.
• Support ad-hoc tests and experiments as needed.
• Assist with overall lab management.

• Diploma in Electrical/Mechanical Engineering or relevant studies.
• Minimum 1 year of working experience in Mechanical or Manufacturing Production related field.
• Troubleshooting skill knowledge will be an advantage.

Job Description & Requirements

• Carry out maintenance services and general repairs of Construction Heavy Vechicle. (Tipper truck, mixer truck, Excavator etc)
• Responsible for testing and troubleshooting of machines, engines and generator.
• Conduct diagnostic check, troubleshooting, automotive transmission and engine overhaul.
• May perform other duties as assigned.

JOB REQUIREMENT:

• Candidate must possess at least a Higher secondary/Pre-U/A level/College, Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, any field.
• At least 5 year(s) of working experience in the related field is required for this position.
• Applicants must be willing to work in Pioneer.
• Preferably Non-Executives specializing in Maintenance/Repair (Facilities & Machinery), Engineering - Mechanical/Automotive or equivalent.
• Experienced in genset, engine repair,
• Possessing basic computer skills
• 5 Full-Time position(s) available.