JOB SCOPE

Carry out pre-delivery inspection, testing, installation & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site. Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.

JOB RESPONSIBILITIES

• Carry out pre-delivery inspecton, testing & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site.
• Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.
• Complete service report including cause(s) of problems, details and detailed parts used for every job completed timely and submit daily with time sheet to the respective supervisor/service engineer.
• Complete daily time sheet and submit daily to the respective supervisor/service engineer.
• Perform installation of attachment according to job specification and installation instruction at customer sites in Singapore.
• Perform retrofitting and modification task and ensure the completed task is compliance with the drawing and instruction provided.
• To handle welding works.
• Handle material preparation for stock like shaft, mounting bracket, manifold block, fitting and hose guide etc.
• Any other duties as assigned by the service management.

Duties and Responsibilities

· Perform commissioning activities, such as Instrument functional tests, dynamic commissioning, completion of functional checks, and complete mark up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

WE ARE HIRING EXPERIENCED SUBSTATION AUTOMATION SYSTEM (SAS) ENGINEER / DCS ENGINEER HAVING SITE EXPERIENCE & KNOWLEDGE IN THE FOLLOWING PRODUCT

ü ABB - RTU560 FAMILY , MICROSCADA , 800XA , S+ / SIEMENS – SICAM PAS , WINCC , RTU: A8000

ü IEC 61850, MODBUS, IEC 103 PROTOCOLS

ü IEC 101, IEC 104, OPC PROTOCOLS

ü DLMS (IEC 62056) METERING PROTOCOL

ü SCRIPTING KNOWLEDGE

ü GOOSE CONFIGURATION

ü UNDERSTANDING OF PRTOECTION SCHEMATIC

ü EXPERIENCED IN P&ID.

ü 3RDPARTY IED & SCADA INTEGRATION

Assembly, Maintenance & Overhaul Technician

Are you an Assembly, Maintenance & Overhaul Technician looking for a new opportunity?

Are you passionate in delivering all types of solutions to your customers?

Join our Drilling Services Team!

Our Drilling Services AMO Team is best at maintaining the latest products of drilling equipment in Baker Hughes. We collaborate with our service delivery teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.

Partner with the best

As the Assembly, Maintenance & Overhaul (AMO) Technician, you're to troubleshoot, test, assemble, disassemble, and perform visual inspection of electro-mechanical assemblies. You're also to review procedures for assembly, disassembly, and test verification accuracy. You're to assist in the preparation, development, and enhancement of maintenance procedural documentation within the Drilling Services team

As the AMO Technician, you will be responsible for:

· Troubleshooting, testing, assembling, disassembling (Parts & Equipment) and perform visual inspection of electro-mechanical assemblies.

· Configurating test stations and systems. Analyzing and interpreting data from environmental tests.

· Providing solutions to difficult technical problems. Perform inspection and disposition of parts & equipment.

· Assisting in setting up experiments and recording experimental data in collaboration with Engineering and Reliability groups

· Maintaining equipment records and filing systems as part of quality control and assurance programs.

· Evaluating maintenance processes for potential improvements in quality, reliability, turnaround times and costs. Compliance with HS&E policies and procedures

Fuel your passion

To be successful in this role you will:

· Have ITE or Technical diploma or Equivalent.

· Have ability to read, write & speak English language.

· Have maintenance related experience in electro-mechanical function or in relevant industrial experience (aerospace, military, oilfield, automotive, electronic).

· Have proficiency in reading and interpreting blueprints, wiring diagrams, assembly prints and parts lists.

· Have excellent soldering and assembling skills.

· Have analytical ability to find solutions towards complex technical issues.

· Have demonstrate systematic approach towards troubleshooting.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

· This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we must push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

· Contemporary work-life balance policies and wellbeing activities

· Comprehensive private medical care options

· Safety net of life insurance and disability programs

· Tailored financial programs.

· Additional elected or voluntary benefits

Duties and Responsibilities

· Perform commissioning activities, such as calibration, functional tests, dynamic commissioning, completion of functional checks, and complete mark-up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

Responsibilities:

• Install and service casino management system & gaming equipment
• Monitor and carry out all scheduled preventive maintenance programmes for electronic gaming equipment
• Ensure compliance with Casino Regulatory Authority and other statutory requirements, established policies, standard operating procedures, internal control & service standards

Requirements:

• Meet Casino Regulatory Authority’s statutory requirement of minimum 21 years of age
• Prior experience of 1-2 years in a related electronic industry as Technician preferred
• Diploma/Certificate or equivalent in Electrical/ Electronics/ Computer System Engineering/Mechatronics
• Must be able to differentiate colors for work purposes
• Able to work rotating shifts and on weekends and public holidays

Your Responsibilities:

• Demonstrate strong knowledge in the manufacturing of Downstream processes, including Fermented broth, Protein separation & purification.
• Hands-on experience in operating and optimizing Continuous centrifuge and Homogenizer for efficient cell separation.
• Proficient in the operation of Microfiltration and Ultrafiltration systems, encompassing Hollow fiber and Spiral modules.
• Hands-on experience with Chromatography systems and related downstream processes.
• Practical experience in the Spray drying process.
• Extensive experience in various downstream processes, ranging from small scale to higher scale.
• Proficient in identifying and resolving issues related to downstream manufacturing equipment and processes.
• Experience in Microbial downstream processes, both intra-cellular and extra-cellular, including separation and purification methods.
• Responsible for operating, optimizing, and stabilizing downstream manufacturing processes.
• Familiarity with Contract Development and Manufacturing Organization (CDMO) processes and adept at customer management.
• Proven experience in scaling up downstream processes from small scale to large scale.
• Train and oversee the manufacturing team, ensuring adherence to all procedures during the process.
• Hands-on experience in project-related activities, including equipment qualification and process validation for downstream processes.
• Collaborate with the QA team to prepare all process-related documents in adherence to quality standards.

Your Profile:

• Bachelor’s or higher degree in a relevant field.
• 3-5 years of hands-on experience in downstream manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent communication and team collaboration abilities.

Carry out maintenance activities such as:

• Servicing of equipment such as centrifugal pump, diaphragm pump, replacement of mechanical seal, pump alignment, rigging & lifting.
• Perform repairs and other maintenance activities to specified specs and standards per procedure.
• Able to perform predictive maintenance and data collection for field equipment
• Able to perform QC equipment maintenance and troubleshooting such as freezer and incubator.
• Attend to equipment breakdown and preventive maintenance on short notice during weekends/public holidays.
• Support equipment inspection with vendor representative on tanks, column, pipelines and centrifuge as per RSTO Visual Inspections standards.
• Repair and replace damaged parts to bring equipment back into service timely to support continuous production planning.
• Perform minor piping modification and rebuild of MRO spare part.
• Perform polishing and passivation of vessel internal surfaces according to RSTO procedure.
• Maintain all machine shop tools and equipment such as, and not limited to, welding set, working tooling, lifting gear.
• To actively participate and perform workplace 5S housekeeping.
• Able to contribute and implement Safety Improvement Ideas for CI projects works together with System/Equipment Engineers.
• Perform tasks as defined in the Maintenance Work Orders for assigned equipment or system.

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Job Qualifications:

The following trainings shall follow the latest applicable WSH regulations

• Scissor Lift/Vertical Personnel Platform - Operator
• Confined Space Operation - Worker
• Work at Height – Worker

Job Requirements:

• Willing to perform shift hours as required.
• Minimum of 3 years working experience, including GMP and Pharmaceutical environment
• Proficiency in spoken and written English.
• Computer literate on Microsoft Office, Email operating system, CMMS software.
• Working experience in handling of hazardous chemical.
• Working experience in basic welding and fabrication work.
• Preferred working experience in handling of Electro-polishing Equipment.
• Preferred experience in operating digital video scope.
• Preferred experience in handling homogenizer and centrifuge equipment.
• Preferred work experience in GMP and Pharmaceutical environment.
• Able to interpret P&ID, LOTO mark-up drawings and perform physical Energy isolation processes.
• Able to perform confine space vessel related work.
• Able to support night shift and outside office hours as assigned by RSTO or Task Supervisor.
• Willing to accept 1-Year contract basis.

Tuas and Biopolis, Singapore

ScaleUp Bio is seeking a highly skilled and experienced Quality System Specialist/ Assistant Manager to join our team. The Quality System Specialist/ Assistant Manager will be responsible for establishing and maintaining quality / food safety related systems. These can include document control, change control management , customer complaint, and various audits. The successful candidate will cover both of our facilities at Biopolis (Singapore) and Tuas (Singapore), and will be reporting to the QA/QC Manager.

Your Responsibilities:

• Assist QA Manager in the implementation of food safety and quality systems, actively participate in food safety efforts and ensure all activities conform to good manufacturing practices.
• Manage, plan, implement, and continuously improve the Food Safety/Quality programs in the Scaleup Bio facilities.
• Serve as the Food Safety Team member and is actively involved in all HACCP Plans.
• Responsible for management of the Supplier Programs including complaints management and feedback.
• Manage the conduct of local supplier audits to ensure that suppliers are qualified.
• Lead Change Control Management.
• Manage Document Control Program
• Manage the local Mock Recall exercise
• Assist QA Manager in crisis situations, such as a potential product recall, high profile customer complaint.
• Set up, implement, and maintain HALAL Assurance System. Main liaison with MUIS (Majlis Ugama Islam Singapura).
• Manage the conduct of internal audit program and ensure compliance to requirements of GMP / HACCP pre-requisite programs, Quality systems, Halal assurance system.
• Assist QA Manager to prepare for external audits and ensure agreed audit findings are corrected and preventive measures are put in place.
• Manage the customer complaint handling system – evaluation, investigation and corrective/preventive action planning, implementation and monitoring.
• Work with multi-disciplinary teams to ensure the progress timeline.
• Ensure safe working practice in research labs, pilot plants, and manufacturing facilities to meet or exceed safety goals.
• Any other tasks related to quality system, as assigned by QA Manager.

Your Profile:

• Bachelor degree with 5+ years’ experience or equivalent in Food Science / Food Technology or related field.
• Industrial experience is desired
• Experience in setting up quality system and food safety system in food industry.
• Trained in HACCP/ FSSC 22000 internal audit.
• Lead auditor certification would be a plus.
• Familiarity with microbial communities and fermentation process would be a plus.
• Strong communication and organization skills, be able to multi-task and exhibit a strong sense of urgency in order to accomplish daily tasks.
• Be self-motivated with the ability to manage time and priorities; must be able to work independently in a team environment, maintain a positive attitude
• Strong writing skills and be fluent in English.

The Career Conversion Programme (CCP) (Train-and-Place) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand. This programme is jointly supported by the Workforce Singapore (WSG) and Workforce Advancement Federation (WAF). The training programme consists of 15 months of local attachment with Roche.

Who are we looking for?

• Fresh Graduates who have recently graduated, OR;
• Candidates with 2 years working experience and above. Not in a similar job function prior to joining this TnP Programme.

Job Overview

Ensure the completion of maintenance tasks and provision of technical support while in full compliance with current Good Manufacturing Practices (cGMP), Safety, Health and Environment (SHE) and Quality policies and standards.

Key Responsibilities

• Responsible for coordinating all external and in-house calibration, maintenance and repair of all utilities and manufacturing equipment/systems serving the entire manufacturing facility and the execution of all job orders by external vendors.
• Responsible for raising purchase requisition for vendors' services through local (Computerized Maintenance Management System) CMMS system.
• Establish good relationship with stakeholders not limited to external vendors/partners, manufacturing, utility, maintenance team.
• Provide technical support to calibration technicians on shift to perform calibration, maintenance and repair of facilities and manufacturing equipment in support of plant operations.
• Provide support to manufacturing, utility and engineering services during routine and shutdown maintenance work; and product change over in support of plant operations.
• Performs timely review and technical completion of work orders, initiate follow up work order and discrepancy notification as required.
• Provide technical expertise in Maintenance, Electrical and Instrumentation to Project Engineering Team and deliver project within stipulated timeline and budget.
• Provide support in the creation or amendment of preventive maintenance or calibration procedures and/or practices to comply with regulatory codes, specifications, standards and corporate guidelines for the safe, reliable and efficient operation of the plant to ensure validity, efficiency and maximum production equipment uptime.
• Increase the mean time between failure (MTBF) of equipment by identifying and eliminating the causes for recurring issues and to implement robust solutions.
• Partner with the Maintenance and Calibration team to reduce mean time to repair (MTTR).
• Implementation of continuous improvement project (Kaizen) and initiate change request to optimize maintenance/calibration activities if required.
• Provide support to the Maintenance and Calibration team during health authority inspections.
• Knowledge in BAS/PCS/PLC/HMI.
• Knowledge in Maintenance and Calibration Processes and Standards.
• Knowledge in Analytical and Laboratory Instrumentation.
• Participate in Root Cause Analysis (RCA's) to identify potential root cause and follow up on all corrective actions and preventive actions.
• Working knowledge in Permit to Work System, Job Safety Analysis (JSA), Risk assessment (including RCA, HAZOP, FMEA), Confined Space System, Work At Height

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

• Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Qualifications (education/experience/knowledge/skills/competencies)

• Degree/Diploma in Mechanical, Marine, Electrical/ Instrumentation or Chemical Process Engineering with at least 1-2 years experience in pharmaceutical or chemical manufacturing.
• Candidates with 1-2 years hands-on maintenance working experience in Pharmaceutical or Chemical manufacturing and experience in project start-up will be preferred.
• Strong background in Operation and Maintenance of equipment and instruments in the production and utility area will be preferred.
• Experience in setting up SAP Maintenance Program, spare parts store, project start-up environment and safety procedures/practices is an added advantage.
• Excellent computer skills including but not limited to CMMS software, spreadsheets and word processing software.
• Excellent analytical problem solving skills and persistence to resolve outstanding issues.
• Excellent inter-personal and communication skills, both written and verbal.
• Must possess the ability to work independently with adequate direction and guidance, and deliver projects/tasks on time and within budget.
• Must be team oriented and be able to work with members of the team.
• Strong leadership and customer service skills, attention to details, accurate and thorough.
• Strong concept of cGMP in area of Maintenance and Calibration.
• Willing to be scheduled to occasionally work off shift hours in support of operations.

Who we are

At Roche, more than 100,000 people across 100 countries are pushing back the frontiers of healthcare. Working together, we’ve become one of the world’s leading research-focused healthcare groups. Our success is built on innovation, curiosity and diversity.

Roche is an Equal Opportunity Employer.

Main Duties & Responsibilities :

Performing routine operations

• Attend toolbox meeting and ensure all the information regarding the status of each operations under his control are properly communicated and documented in patrol log and/or handover log sheets
• Supporting shift operation activities when in demand (such as shift manpower shortage or extra manning requirement during special operational period).
• Strictly follow documented procedures (e.g. Standard operating procedure- SOP, EHS regulations, Check sheet, risk assessment) to ensure safe and stable operation in the plant
• Record all the information in the documented records (eg: Log-sheet or checksheets) as required and be involved in the process trouble-shooting / investigations / abnormality reports
• Checksheets and workflow sheet must be completely filled up at each step and final completion confirmed by supervisor
• Provide input and/or prepare draft of revised manufacturing SOP or checksheets
• Promptly report any near miss / deviations / incidents to his Supervisor, directly or through Risk reporting & improvement proposal system.
• Keep good housekeeping conditions at all times, return all tools / items to designated place and enforce similar standards to contractors. Ensure tools / items fully accounted during handover / takeover according to quantity and condition specified.
• Assist his supervisor to collect data and samples to facilitate trouble shooting or improvement effort.
• Support implementation of new/revised procedure and check compliance to the procedures. Inform his direct supervisor if any abnormality is detected
• Monitor stores and tools managed by day team to ensure sufficient stores and tools, and in good working condition
• Provide administrative support to production department members, in purchasing consumable items. Assist operation team in sourcing new operational tools and maintain the inventory of item.
• Senior day technicians, are required to participate in ASDM activities, including procedure preparation, blind allocation, critical task coordination.
• Working team in managing Car seal program to ensure processes valves are locked at defined position for safety credit. In parallel, control and manage NO/NC program and reporting status to his superior.

Quality Control

• Has responsibility to ensure quality of products under his control, including prevention of foreign material contamination

Performing non-regular work

• When an abnormal condition is detected (outside of normal operating condition), stop operation and inform supervisor immediately
• Support actual NRW, in parallel to shift operation. Join toolbox meeting, understand and take effective measurement to mitigate and manage the risk during NRW execution. Conduct properly work closure including normalizing the process as per plan and carry out house keeping at workplace.

Emergency response

• Involve in CERT team/organization when appointed as part of CERT (Company Emergency response team)
• Participate in CERT training, drills and audits defined by EHS department
• When emergency situation occurs, follow the steps established in the emergency response plan, perform assigned role such as fire warden, first aider or rescuer

Committee and training

• Involve in Production department committee as shift representative, to provide feedback to committee and assist committee to implement action items
• Train and guide new day technicians during On-job-training

HR policy and Overtime participation

• Adhere to HR policies requirements and perform overtime duties pre-arranged with supervisor
• Where possible, participate in over-time work or emergency call-out due to urgent manpower needs in production department
• Join short term shift work or ad-hoc support to shift team as instructed by direct supervisor

REQUIREMENTS

• Diploma or Nitec in Chemical engineering or equivalent.

• Minimum 2 years work experience in a chemical processing environment. Experience in polymerization

and/or extrusion is advantageous.

• Possess basic Knowledge of chemical processing with working knowledge of ISO14001, ISO9001,

SS506 part 3

• Proficient in using computing software – MS word, MS Excel

• Able to work on day in a fast paced environment

Your Responsibilities:

• Demonstrate a strong understanding of the manufacturing of Upstream (Fermentation) processes.
• Possess practical experience with Fermenters and associated equipment across a range of scales, from small to large.
• Skilfully troubleshoot fermentation process issues related to equipment and overall process to ensure seamless operations.
• Showcase proficiency in both Batch and Fed Batch phases within the fermentation process.
• Exhibit hands-on experience in both intra-cellular and extra-cellular Microbial fermentation processes.
• Take charge of operating, optimizing, and stabilizing the upstream manufacturing process.
• Showcase your expertise in Contract Development and Manufacturing Organization (CDMO) processes, including customer management.
• Demonstrate a successful history of scaling up fermentation processes from small to large scale.
• Utilize your experience to resolve contamination issues in the fermentation process.
• Take responsibility for training the manufacturing team and ensuring strict adherence to all procedures during the process.
• Exhibit hands-on experience in project-related activities, specifically equipment qualification and process validation for fermentation processes.
• Prepare comprehensive process-related documents in collaboration with the Quality Assurance team.

Your Profile:

• Bachelor’s or higher degree in a relevant field.
• 3-5 years proven experience in upstream manufacturing with a focus on fermentation processes.
• Strong troubleshooting skills and a proactive problem-solving mindset.
• Excellent communication and interpersonal skills.
• Familiarity with CDMO processes and customer management.
• Ability to lead projects and work collaboratively in a team environment.

ONE OF SINGAPORE’S TOP SME 1000 COMPANIES, MORE THAN 30 YEARS IN THE INDUSTRY & LEADER IN INDUSTRIAL/ OIL & GAS/ MARINE SAFETY PRODUCTS & SERVICES IN JURONG IS LOOKING FOR TECHNICIANS TO JOIN OUR TEAM.

SERVICING AND REPAIR OF MARINE AND INDUSTRIAL LIFESAVING AND FIRE FIGHTING EQUIPMENT

COMPANY TRANSPORT PROVIDED FROM BOON LAY MRT

• MIN ITE
• COMPLETE NS
• EXPERIENCE AN ADVANTAGE
• ABLE TO WORK INDEPENDENTLY AND SELF-MOTIVATED
• GOOD INTERPERSONAL SKILLS

BONUS: OVERTIME CLAIM + VARIABLE BONUS

Job Description

• Responsible for the continuous supply of purified water, chilled water, PUB water, steam, compressed air, etc.
• Responsible for continuous treatment of process wastewater and ensuring compliance with the discharge of treated water to the public sewage system.
• Responsible for carrying out or coordinating with vendors on asset repairs, maintenance, calibration, or project works.
• Manage external contractors/vendors in support of operation and maintenance activities.
• Assist supervisor in preparing equipment for maintenance, performing equipment isolation, LOTO, and supporting permit-to-work issuance.
• Ensure compliance with GMP, regulatory requirements, ISO and EHS standards, and other relevant policies/standards, and support audit functions.
• Any other duties and responsibilities as assigned by the Supervisor.

Job Requirements

• Possess a minimum NITEC in a technical field of study.
• Minimum 3 years of working experience in the electronics, cosmetic, food, medical, or pharmaceutical industry handling facility or utilities.
• Boiler Attendant Class 2 certification is a must.
• Competence in purified water, chilled water, steam, compressed air, wastewater treatment, clean room HVAC operation, and maintenance.
• Self-motivated, good teamwork and interpersonal skills.

Based in Tuas Company (Transport provided)

Benefits:

• 37.5 hour work week (additional hours is OT-payable)
• $90 quarterly allowance to buy Coca Cola products
• 18 days Annual Leave
• Shift working hours (Rotating shift hours, Mon - Fri, 730AM - 4PM / 330PM - 12MN)

Pacific Refreshments Pte Ltd (The Coca-Cola Company) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position:

• Looks at optimizing production, yield and product quality.
• Implement and maintain quality systems, improvement projects and other initiatives and tasks in line operation.

Operations

• Achieve line and batch efficiency and output requirements
• Maximize output by reducing downtime through monitoring and controlling changeover time.
• Produce the right quality by managing all quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Job Requirements:

• Diploma or NITEC qualifications in Engineering, fresh graduates are welcomed to apply
• Good communications in English
• Team player

If this sounds interesting and you like to explore, we look forward to meeting you!

To maintain and repair hydraulic equipment

To replace seal kit

To replace hydraulic hose

To troubleshoot hydraulic circuit

Our Client:

• Marine Industry, German MNC
• 5 Days, Office Hours
• Pioneer/Benoi Area
• UP $5000 Basic + Variable Bonus

Job duties:

• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Descriptions:

• Carry out rectification and troubleshooting of plant and auxiliary equipment as assigned.
• Carry out routine checks and testing of plant equipment based on job requests in accordance with good maintenance practice.
• Do hands on planned maintenance such as but not limited to greasing and cleaning of equipment and machinery.
• Record details of maintenance and repairs works carried out.
• Maintain proper housekeeping as well as tidiness of the workplace.
• Manage documentation such as work procedures accordingly to plant standard SOPs and quality standard.
• To adhere strictly to all EHS rules and regulations imposed by the plant.
• Any ad-hoc tasks and duties assigned by supervisor / plant management.

Requirements:

• Minimum NITEC in Mechanical / Mechatronic Engineering or higher .
• Minimum 1 years’ experience in operation or manufacturing environment
• Good hands on experiences in rotation equipment repair such as pumps & agitators is an advantage
• Have initiative, good communication skills and able to take responsibility.
• Working knowledge of the principles and mechanics of plant equipment is essential
• Possess a basic welding skill will be an added advantages

Our Client:

• Marine Industry, German MNC
• 5 Days, Office Hours
• Pioneer/Benoi Area
• UP $5000 Basic + Variable Bonus

Job duties:

• Conducting marine equipment (such as highly flexible couplings, dampers, mounts, shafts) overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products (highly flexible couplings, dampers, mounts, shafts) & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Key Responsibilities:

• To perform installation, troubleshooting, test and repair works for German manufactured automated storage system
• To commission automated storage system and provision of high quality support and training to the end-customer.
• To standby 24 hours on duty roster.
• To provision engineering services on weekends, public holidays or extended hours (if required)
• To support installation.
• To prepare project schedules and provide good follow up with customersTo be able to do wiring
• Any ad hoc duties assigned by Superior

Qualifications:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent

Knowledge and experience:

• Minimum 1 years experience in similar position on maintenance/service of machinery
• Candidates with no experience are welcome to apply. Training will be provided
• Knowledge of electrical works and the analysis electrical circuit diagrams is essential

Requirements:

• Must possess valid class 3 driving license
• Required Skill(s): MS Excel, MS office

Working hours & location:

• Monday –Thursday – 8.00am to 5.30pm, Friday – 8.00am to 5.00pm.
• Location: 49 Tuas Close View, Singapore 637474

Job Description:

• To carry out water sampling for process unit and send to lab for analysis and follow up with the recommendation in process.
• Operate Boiler / Evaporator / cooling tower / RO in the WasteWater Plant
• Control Panel operation through SCADA system to monitor and adjust process parameters.
• To update test result in data system
• To handle general workers in the plant for daily plant works and chemical handling
• To maintain all the process units/ pumps and equipment’s and instrument in good condition.
• To support shift ad-hoc operation

Requirement:

• Education – N Level & above (equivalent in O Level with high experience in the relevant field to be considered)
• Skills - Basic English communication includes reading and writing skill
• Abilities – Ability to work independently
• Other characteristics such as personal characteristics – Team player with interpersonal skills (gentle, considerate and patient)
• People certified with Forklift / WAH/ OPSOC / Boiler attendant class-2 have added advantage.

Job Summary:

• Salary: Basic up to 4500k
• Working Hours: 8am - 5.30pm
• Working days: Mon - Fri
• Location: Ang Mo Kio

Job Description:

• Develop Oracle Reports & Forms, PL/SQL, XML Publisher & DotNet
• Provide techno-functional support on Oracle EBS R12 in Manufacturing & Finance
• Liaise directly with end-user on problem-solving, requirements gathering, feasibility study and design solutions
• Conduct training and user-acceptance/system test on all changes made

Job Requirements:

• Degree in Information Technology or equivalent
• Minimum 2-3 years of experience in functional support on Oracle EBS R12, Oracle Report Builder and PL/SQL is preferred
• Able to work independently under tight schedule
• Service-oriented and good problem solver

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Eugene Eiap Yeow Hong

Registration Number: R23112438

EA License No: 06C2859 (MCI Career Services Pte Ltd)

• Coordinate with customers and provide sales support to the sales team

• Prepare and Submit Quotations to Customers

• Handle the processing of all orders with accuracy and timeliness

• Liaise with the logistics team to ensure customers' deliveries are met

• Inform clients of unforeseen delays or problems

• Monitor the team’s progress, identify shortcomings and propose improvements

• Assist in the preparation and organizing of promotional material or events

• Any ad-hoc duties assigned (in relation to sales)

Position: Printer Technician / Printing Technician

Location: near Joo Koon MRT

Job Description & Requirements:

- setting of plate

- operating of printing machine

- change of colour, washing of rollers and mixing of inks

- check the quality of printed sheets

- checking and maintaining of machines

- keeping of items in the correct location / housekeeping duties

- any other duties

- NTC with 2 years experince in paper or metal printing an advantage

- willing to work 12 hours rotating shift (6:45 to 6:45)

Trainee Aircraft Technician

• Basic Up To $2600
• Monday to Friday: 8.30am - 5.30pm
  Shift work may be applicable
• Paya Lebar & Seletar (Airport)

Roles & Responsibilities after completion of Aircraft Maintenance Technician (ACMT) training:

• Receive comprehensive training on the maintenance, overhaul, and repair of aircraft engines.
• Assist experienced technicians in the disassembly, assembly, and inspection of aircraft engines.
• Learn and follow procedures for cleaning, grinding, and polishing engine components.
• Assist in conducting measurements and inspections to ensure components meet specifications.
• Participate in engine testing and performance checks to identify any issues or abnormalities.
• Collaborate with the team to troubleshoot and diagnose engine problems.
• Assist in the installation and removal of engine parts, including seals, bearings, and gaskets.
• Maintain accurate documentation of maintenance activities, including repairs and parts used.
• Adhere to safety protocols and regulatory requirements in all engine maintenance tasks.
• Continuously develop knowledge and skills through training and on-the-job learning.

Requirements

• 14 months traineeship + 24 months bond upon completion of traineeship
• N level and above, with and without engineering background
• No experience required

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Kam Shwu Min | EA Personnel No.: R22111811