Responsibilities:

• Perform model conversion setup and execute production buyoff procedure for mass production run
• Assist in setting up new machine and carrying out relocation activities if required
• Perform trouble shooting and analysis on product quality issue and work with engineer on corrective/preventive actions.
• Carry out preventive maintenance to SMT machines and other automation machines including tooling jig & fixtures.
• Initiate and carry out continuous improvement project to improve the manufacturing productivity and efficiency of equipment
• Provide control and monitoring of production machine spare part inventory and indirect material inventory
• Ad-hoc assignments as tasked

Requirements:

• Min NITEC / Diploma in Mechatronics, Mechanical or Electronic Engineering
• Good experience in SMT industry or other customized automation machines
• Good technical skill with hands on knowledge in SMT machines (e.g. Solder Printing, SPI, Pick & Place, AOI, Reflow oven, Underfill dispensing, Dicing)
• Good trouble-shooting or diagnostic skills on printed circuit board (PCBA)

Medical device MNC

Working hours: 7am to 3pm (Mon to Fri), Alt Sat

Basic monthly salary: up to $2700

AWS and variable bonus

Living allowance: $300/month

Attendance incentive: $65/month

Shift allowance: $10/day

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Maintenance of machines and equipment
• Maintenance of tools, jigs and fixture. Requisition of duplicate tools and scrap of obsolete tools
• Support machine installation, trial run, troubleshooting and repair of machines and equipment
• Support validation in sample preparation, trial run, data collection and testing
• Assist engineer in samples preparation, testing and data collection
• Update work instructions and document records for maintenance and production work
• Administration work (raise requisition forms in purchase, shipping, etc)
• Co-ordinate with suppliers, internal department for maintenance and calibration tasks
• Conduct internal on-the-job training for production operatives
• Participate in audits by internal and external bodies
• Other tasks assigned

Requirements:

• Minimum Nitec in mechanical technology/mechanical or manufacturing engineering
• Min 2-3 years of manufacturing / production technician experience

Office hours, Mon to Fri

Up to $3K

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

(No Experience is required, all training will be provided)

We are looking for a self-motivated trainee Site engineer/ Utility Detection Specialist (LCDW/TCDW) at our company. Our trainee engineers will form part of an integrated team and should be comfortable working well with the rest of our admin and drafter teams.

To be successful as a Utility detection engineer, you should stay up-to-date with detection methods, software, and advancements. Engineers must demonstrate attention to detail and have sound knowledge of the discipline.

- Oversee and carry out projects assigned to you

- Operating electromagnetic cable locator to detect and locate underground services (training will be provided)

- Liaising with drafter and admin staff to carry out projects

- Going to various sites to carry out projects

- Communicating and liaising with clients on their project

- Company transport will be provided (need to have class 2B or class 3 license)

Requirements:

No experience required

ITE Certification/ Poly Certification/ Degree Certification in Electrical/ Mechanical/ Civil Engineering

Location: Seletar

Mon to Fri (5 days)

Morning shift 8.45am to 5.30pm ($40 shift allowance)

Afternoon shift 4,30pm to 1.15am ($40 shift allowance + $30 transport allowance)

• Conduct analytical tests, including wet chemistry, reagent preparation, and sampling.
• Perform metallurgical testing and microstructure analysis according to approved methods.
• Verify accuracy of test results and calculations before submission.
• Assist in client and ISO audits, ensuring all documents are audit-ready.

Interested applicants may email resume to [email protected]

Jessie Hoe Huey Miin (CEI Registration No: R1103861)

Recruit Express Pte Ltd (EA: 99C4599)

Job Description:

• Conducting periodic checks and analysis on work-in-progress (WIP) and finished products
• Assisting QA with failure analyses and customer complaints
• Supporting GMP audits, validation, and change control
• Maintaining product quality and technical files
• Writing technical papers, reports, and preparing standards and specifications

Requirements:

• Min. Dip/Deg in Chemistry, Quality Assurance
• Min 1 supervisory experience in QC
• Knowledge of regulatory requirements and ability to implement changes
• experience with ISO 13485 and good laboratory practices (cGMP)

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]

Salary

Service Engineer (Semiconductor)

5 days, 9am- 6pm, may need to support short term night shift

Salary: $2700- $3800

Address: Woodlands

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Benefits:

• Full training provided

• Completion Bonus + Sign on Bonus + Variable Bonus

• MNC, Great Career Development

Job Scopes:

• Support the maintenance and repair of aircraft systems and components.

• Conduct inspections, troubleshooting, and testing procedures under supervision.

• Service engines, landing gear, hydraulic systems, and avionics equipment.

• Examine aircraft components for signs of leaks, cracks, or damage.

• Maintain, repair, and rebuild aircraft structures, functional components, and parts to ensure optimal performance.

• Assist with additional tasks and duties as assigned.

Job Requirements:

• At least Nitec, Higher Nitec, or Diploma in any engineering related field.

• Candidates with no experience are welcome to apply, training will be provided.

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

Job Description

• Industry/ Organization Type: Compressed Air System Solution Provider
• Position Title: Field Service Technician
• Working Location: Tuas South
• Working Hours: 5 Days, Mon – Fri (8.30am – 6pm)
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Perform installation and setup of compressed air systems.
• Conduct routine and scheduled maintenance of machines and equipment.
• Troubleshoot and repair any issues related to compressed air systems.
• Maintain accurate records of maintenance work and service schedules.
• Provide technical support and advice to customers.
• Ensure compliance with safety regulations and standards.

APPLY NOW!!!

• NITEC in Mechanical Engineering or related field.
• Basic knowledge of electrical/mechanical systems.
• Experience in compressed air systems or a similar industry is preferred.
• Possess a valid Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72144 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Building Technician | 6 Days | Up to $3k | islandwide

Working Days: 6 days
Working Timing: Shift, based on duty roster
Working Location: Islandwide, based on project available or mobile team
Starting Salary: $1800 to $3000 + OT

Responsibilities & Duties

1. Coordinate and assist in the daily operation of the M&E services, such as carrying out all planned maintenance schedules and periodic inspection, and up-keep of the common area.
2. To perform weekly checks on the estate’s M&E system, including minor troubleshooting on failure of systems.
3. To carry out minor troubleshooting on any failure on the M&E systems.
4. To maintain a proper stock control for all mechanical/electrical accessories and materials purchase.
5. To respond to ad-hoc complaints received from the Management office from time to time.
6. To respond and attend to all emergency calls, and for reinforcement of manpower during minor breakdown of M&E equipment within the estate’s common area.
7. To ensure that service contractors conduct the servicing properly and in accordance with the service contract.
8. To follow external contractors that are at site to carry out routine servicing.
9. To attend to any other job function on M&E related issues that may be assigned from time to time.
10. To carry out minor items of repair, such as repair of fixtures/fittings and touch up painting.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

• MNC Company
• Basic $2200 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations
• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement
• Any other duties as assigned

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Operate ophthalmic equipment (e.g., Femtosecond lasers, Excimer lasers, topography) for LASIK-related tests in operating theatres and diagnostic rooms.
• Maintain optimal operating theatre conditions and ensure all machines and equipment function smoothly.
• Prepare LASIK case notes at least one day before surgery and arrange routine maintenance for equipment.
• Perform front counter duties such as patient registration, appointment scheduling, payment collection, financial counseling, and handling inquiries via phone or email.
• Carry out ad-hoc tasks as assigned by the Clinic Manager or Doctor.

Requirements:

• Minimum Diploma in healthcare, biomedical science, or a related field.
• Specialized training or certification in operating ophthalmic equipment is an advantage.
• Team player with excellent communication and interpersonal skills
• Proactive and positive working attitude

Interested candidates who wish to apply for the advertised position, please click on “Apply Now”. Alternatively, you may email us an updated copy of your resume (Attn: HUEY) for a confidential discussion.

Job Code: HUEY

EA Reg No: R24122358 (YEO HUEY CHEEN)

EA License: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Description:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.
• Complete all documentation including Record of Manual Operation (RMO), Cleaning Instruction (CI), Manufacturing Instruction (MI) according with GMP and GDP standards.

Requirements:

• Min. NITEC / Diploma in Chemical Engineering / Chemical Process Technology
• Exp in pharma industry will be an advantage
• Able to commit 12 hours rotating shift

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Mon - Fri, Day OR Night shift - shift allowance available for night shift! (up to 550+ per month)
• Nearest MRT: Upper Changi
• Salary Up to $3000 (Depending on Exp)
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Microelectronics or any Engineering related studies
• Singaporean only
• Experience in Assembly, Build, Test, Preventive Maintenance is a must
• Candidates with or without experience are welcome to apply!

The Job

• Follow and provides feedback to complex technical reports and/or manufacturing procedures.
• Performs precision measurements and works within close tolerances
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembly of equipment/Unit(s)
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step

• Interested candidates can email to [email protected] with details below:
  • Full Name
  • Residential Area
  • Updated Resume
  • Availability

Eugene See
Direct Line: 8889 1296
EA License No: 91C2918
Personnel Registration Number: R21102460

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Aircon Technician cum Driver

Working Location : Defu Lane

Working Hours : Mon - Saturday (9am-6pm)

Salary range: $2,000 - $2600 + Incentive

Job Responsibilities

• Inspects, maintains and repair various types and brand of air con system including split unit, window, cassette and casement unit.
• Perform regular preventive maintenance and corrective works on aircon.
• Diagnoses electrical and mechanical defect and malfunctions.
• Carry our repair, servicing, replacement on fan coil and compressors
• Know installation.

Job Requirements

• With relevant working experience
• With class 3 driving license (Drive Van - can discuss to bring back)

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• 5 days | 8:00 am to 5:00 pm, or 9:00 am to 6:00 pm
• Salary range: S$ 3,000 – 3,500 + AWS
• Location: West / Shipyard Islandwide subject to Customers

Job Summary

We're seeking an experienced Service Technician specializing in NAVCOM systems, with expertise in IT, VSAT, LEO, and MEO technologies. Responsibilities include installing, maintaining, and repairing navigation and communication equipment on vessels, with flexibility to travel.

Key Responsibilities

• Install, configure, and test NAVCOM systems, including VSAT, LEO, and MEO equipment
• Perform routine maintenance and repairs on navigation and communication equipment
• Troubleshoot and resolve technical issues with NAVCOM systems
• Collaborate with vessel crew and other stakeholders to ensure seamless installation and maintenance of NAVCOM systems
• Develop and maintain technical documentation and reports
• Stay up-to-date with industry developments and emerging technologies in NAVCOM systems

Requirements

• Relevant studies / experienced in related industry
• Experienced in IT, VSAT, LEO, and MEO technologies
• Strong understanding of navigation and communication systems
• Willingness to travel

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Service Technician – NAVCOM (IT, VSAT, LEO, and MEO)

• 5 days | 8:00 am to 5:00 pm, or 9:00 am to 6:00 pm
• Salary range: S$ 3,000 – 3,500 + AWS
• Location: West / Shipyard Islandwide subject to Customers

Job Summary

We're seeking an experienced Service Technician specializing in NAVCOM systems, with expertise in IT, VSAT, LEO, and MEO technologies. Responsibilities include installing, maintaining, and repairing navigation and communication equipment on vessels, with flexibility to travel.

Key Responsibilities

• Install, configure, and test NAVCOM systems, including VSAT, LEO, and MEO equipment
• Perform routine maintenance and repairs on navigation and communication equipment
• Troubleshoot and resolve technical issues with NAVCOM systems
• Collaborate with vessel crew and other stakeholders to ensure seamless installation and maintenance of NAVCOM systems
• Develop and maintain technical documentation and reports
• Stay up-to-date with industry developments and emerging technologies in NAVCOM systems

Requirements

• Relevant studies / experienced in related industry
• Experienced in IT, VSAT, LEO, and MEO technologies
• Strong understanding of navigation and communication systems
• Willingness to travel

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Additional Information:

• Mon – Fri (8.30am to 5.30pm)
• Singaporean Only
• Basic (up to 3K) + AWS + Bonus
• US MNC
• Wide ranges of measuring equipment.
• Not required to travel to customer site.

Responsibilities:

• Carry out calibrations & adjustment according to required standards.
• Setup of equipment.
• Troubleshoot and repair of equipment.
• Interpret and carry out requests from customers.
• Liaise with customers to provide product information and technical support.
• Advise management promptly of potential or actual issues requiring action.

Requirements:

• Minimum O Level/NITEC in electronics, electrical, mechatronics or mechanical engineering.
• Good communication skills.
• Ability to carry/lift calibration equipments.
• Ability to multi-task and think laterally in problem solving.

Interested applicants, please submit your application now! We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R24120207 (Soh Yan Cheng Andrew)

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Salary: up to $3200

Working Days & Hours: Mon-Fri Office Hours

Location: Novena

Job Description:

• Performing and completing scheduled preventive maintenance jobs for biomedical and scientific equipment by following manufacturer's instructions and checklist.
• Troubleshooting and repairing breakdowns jobs for biomedical and scientific equipment by following manufacturer's instructions.
• Troubleshooting and assisting user department on NGEMR related issues for biomedical and scientific equipment.
• Ordering and expediting parts orders for breakdowns jobs.
• Ensuring scheduled preventive maintenance and breakdowns jobs for biomedical and scientific equipment are completed within KPI or reasonable timeframe with justification provided.
• Liaising with user department, biomedical and scientific equipment vendors ensuring impact to user’s operations are minimized.
• Assisting user department on their biomedical and scientific equipment inventory.
• Attending technical training on biomedical and scientific equipment arranged by Training Coordinator.
• Understand IT, Cybersecurity and EMR Integration related matters for biomedical and scientific equipment.

Job Requirements: Min Diploma in Biomedical Engineering or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Lab Technician / Lab Assistant (Surface Finishing Chemical)

• 5 Days
• 830am-530pm
• $1800-$3000
• Tuas South Drive (Company transport from Boon Lay MRT)

Responsibilities

• Perform quality control daily
• ⁠Prepare standard solution and acids
• ⁠Handling chemical of plating industry
• ⁠Maintain lab cleanliness
• Carry out various testing procedures relating to customer needs

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• MNC
• Basic $ 2500 - $ 3000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Ubi
• Working Hours: Monday - Friday 9am - 6pm / Saturday 9am-1pm (Alternate)

Responsibilities:

• Maintain the facilities with routine checks on electrical, air-conditioning systems, compressed air and chilled-water systems
• Contact and work with contractors for routine servicing and emergency repair in order to keep the building in daily operational state
• Supervise vendors during renovation in order to ensure a smooth transition to new areas
• Maintain good housekeeping in AHU and switch room to maintain cleanliness of equipment and site
• Work with contractors and vendors to carry out schedules and supervise work on premises to ensure quality cost effective repairs and renovation
• Must be able to hands on to carry out repair for sanitary and plumbing works, electrical works and building works
• Must be able to carry out simple fault finding for telephone lines
• Any other duties that may be assigned from time to time

Job Requirement:

• Possess minimum Nitec in Facilities / Electrical / Mechanical / Building Service with at least 2 years of related experience
• Certificate in Building Maintenance / Building Inspection will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

CHENG JAU WEI (R23115788)

EA Recruitment Pte Ltd

EA License No: 21C0492