The Opportunity:

• Our client, Government Science Agency
• Great learning exposure, training provided!
• Basic Salary: Up to $2,500
• Working hours: 9AM - 9PM, assigned as per shift
• Multiple vacancies available!

Job Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers.
• Monitor basic equipment/process errors and perform recovery.
• Work with parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

Job Requirements:

• Proficient in operating semiconductor equipment and basic troubleshooting.
• Experience in semiconductor manufacturing or wafer processing is a plus.
• Able to transport wafers in cleanroom and coordinate logistics.
• Independent, responsible, and able to work in a team.

Next Step:

• Prepare your updated resume
• Simply click on 'Apply here' to drop your resume.
• All shortlisted candidates will be contacted.

Jason Ng
Direct Line: 6697 7967
EA License No: 91C2918
Personnel Registration Number: R23113333

Maintenance Technician

5 Day (Mon – Fri): 8am-5.30pm + OT

Salary: $1,600 - $2,200 + AWS + Allowance + VB

Location: 1 Senoko South Road Singapore 758069 （Sembawang Area）, transport provided

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Service Technician (Electrical Switchboards)
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Saturday, 8.30am – 6pm
• Salary Package: Up to $2,500 + VB + OT
• Duration: Permanent

Key Responsibilities

• Perform the installation and commissioning of Electrical Switchboards on various sites, ensuring all components meet the required specifications and standards.
• Respond to service calls promptly, providing exceptional on-site service support, and troubleshoot any issues that arise efficiently.
• Maintain continuous follow-up with customers regarding service issues to meet and exceed customer expectations, ensuring satisfaction and service quality.

APPLY NOW!!!

• Minimum qualification of GCE 'N' level or Nitec in Mechanical/Electrical Engineering
• Prior experience working with Electrical Switchboards is preferred
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70251 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Singapore Based (Pioneer)
• 5 days | Mon to Thu 7.30am - 5pm, Fri 7.30am - 4pm
• 2 years working experience in manufacturing site preferred; Basic computer knowledge
• Career Progression Opportunities

Summary: To help the process flow be more effective are in good condition and to ensure that only good quality products are delivered to customers and meet customer requirement. (Report to QC manager).

• Perform Final Inspection
• Testing on incoming goods ie . Paint/Lacquer/Steel (Every batch)
• In Process quality verification (Min Twice a day)
• Inhouse Measuring Equipment’s calibration (Twice yearly)
• Documentation – Process records / Test report
• Raise Non-Conformity Report (Daily)
• Drums performance testing (UN test)
• Others – Ad-hoc basis Example: First Article Inspection, Customer complaint investigation, Product Packaging Test
• Liaising with production, Logistics, Supply Chain/Store, Sales & Marketing departments.

Job Requirements:

• 2 years working experience in manufacturing site preferred
• Basic computer knowledge
• Knowledge in ISO procedure & statistical analysis (advantage)

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Lab Technician / Lab Chemist (Surface Finishing Chemical)
5 Days
830am-530pm
$2000-$3900
Tuas South Drive (Transport provided at Boon Lay MRT)

Responsibilities

• Prepare solutions by weighing ingredients and dissolving and diluting substances
• Analyze organic and inorganic compounds to determine their composition
• Conduct qualitative and quantitative experiments taking into account the volume and structure of ingredients
• Customize formulas and use different reagents to test chemical reactions
• Write technical reports of the test results
• Develop nonstandard tests for chemical products
• Maintain lab equipment and troubleshoot or report on malfunctions
• Refine chemical products to improve their quality
• Ensure compliance with laboratory health and safety guidelines
• Sterilize equipment and store materials in secure places

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Install and configure electronics and communications equipment, ensuring proper setup and integration with existing systems. (CCTV, Card Access, Trunk Radio,UPS)
• Conduct routine maintenance and perform repairs on various electronics and communications devices to ensure optimal functioning.
• Diagnose and resolve technical issues related to electronics and communications equipment, minimizing downtime and disruptions.
• Assist in the implementation of system upgrades and enhancements, ensuring compatibility and improved performance.
• Maintain detailed records of installations, repairs, and maintenance activities, including schematics and technical manuals.
• Provide technical support to users, addressing their queries and assisting them in operating electronics and communications equipment effectively.
• Test and calibrate electronics components and systems to ensure they meet specifications and operational standards.
• Manage inventory of spare parts and tools, ensuring availability of necessary components for maintenance and repairs.
• Ensure all work complies with safety regulations and standards, maintaining a safe working environment.
• Liaise with vendors for the procurement of electronics and communications equipment, parts, and services, ensuring timely delivery and quality standards.

Job Requirements:

• Nitec or Higher Nitec in any technical qualifications
• Able to work outdoors and at heights

Wong Li Qi (Jolin)

R2096313

Completion of relevant cosmetology programs and possession of valid licenses in beautician services, nail technology, and eyelash artistry.

Proven experience in beauty treatments including facials, waxing, makeup application, manicures, pedicures, nail art, and eyelash extensions/lifts.

Strong attention to detail with a focus on precision and quality in all beauty services.

Creativity and the ability to design unique nail art and recommend appropriate lash styles based on client preferences.

In-depth understanding of beauty products, tools, skin types, nail care products, and lash adhesives.

Staying updated on current trends in beauty, nail art, and eyelash techniques.

Excellent communication skills to interact with clients, understand their needs, and provide personalized beauty solutions.

Ability to build and maintain strong client relationships, ensuring high levels of satisfaction and repeat business.

Adherence to health, safety, and hygiene guidelines, maintaining a clean, sterile, and organized work environment.

Knowledge of infection control procedures to ensure client safety during all beauty treatments.

A friendly and approachable demeanor, along with a professional appearance.

Commitment to continuous learning and professional development in the beauty industry.

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Key Responsibilities:

• Monitor and operate machinery and equipment to ensure optimal performance during shifts.
• Perform routine inspections and preventive maintenance on mechanical, electrical, and control systems.
• Diagnose and troubleshoot equipment malfunctions and perform necessary repairs.
• Identify and resolve technical issues promptly to minimize production disruptions.
• Collaborate with team members and supervisors to analyze and resolve recurring equipment problems.
• Maintain accurate records of maintenance activities, equipment status, and any issues encountered.
• Provide detailed shift reports and escalate critical issues to supervisors as needed.
• Adhere to workplace safety standards and procedures, ensuring a safe working environment.
• Participate in safety audits and training sessions as required.
• Ensure all maintenance activities comply with company policies and regulatory requirements.
• Recommend and implement improvements to equipment performance and maintenance procedures.
• Stay updated on the latest industry trends and technologies to enhance operational efficiency.

Qualifications and Requirements:

• Technical Skills:Proficiency in mechanical and electrical systems troubleshooting. Familiarity with PLC systems and industrial automation (preferred). Ability to read and interpret technical drawings and manuals.
• Soft Skills: Strong problem-solving and analytical abilities. Effective communication and teamwork skills. Ability to work independently and handle shift schedules.
• Other Requirements: Willingness to work on rotating shifts, including nights and weekends. Physical fitness to handle maintenance tasks in an industrial setting.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Mechanical system assembly, electrical wiring, I/O test and site installation.

· Provide basic operation training to customer

· Assist in machine repair, service, maintenance & troubleshooting.

· Update progress of given tasks to department head.

· Ensure given tasks complete within given timeline.

· Liase with suppliers, contractors and customers on site installation job.

Requirement

· Minimum Nitec in engineering or equivalent

· Willing to learn and responsible

· Team player who is able to work independently when required.

Basic knowledge in mechanical, electrical system is preferred

Technician (SecurityLock/Vault doors Products) - Training Provided

• Install, repair, and maintain safes and vaults
• Install mechanical and electronic locking devices etc
• Provide customer service by communicating with clients, understanding their needs, and ensuring their satisfaction with the company services.

Qualifications:

• Have some experiences in installation and repair related area (can be different industries) etc as product & technical training will be provided
• Proficiency with basic hand tools and equipment
• Valid driver’s license as company van will be provided

Location: Near to Potong Pasir MRT/ Geylang Bahru MRT

Salary: $2500 to $3500 + allowance etc

Interested candidates are welcome to email resume to [email protected] and CC to [email protected]

JD:

• Perform Material receiving, staging, material movement, dispensing, sampling, filter inspection, change out and charging operation as per Standard Operating Procedures (SOPs).
• Perform sampling, intermediate and finished goods pack out as per SOPs.
• Perform pre-campaign set up, post campaign activities and change over cleaning.
• Monitor process operation, trend and alarm using Delta V control system.
• Ensure proper communication and handling over of shift duties.
• Responsible for the updating of Manufacturing Standard Work and Operation Standard work.
• Complete all documentation according to GMP and GDP standards.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to the manufacturing process.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Responsible for preparation and cleaning of equipment for maintenance work
• Take immediate action to resolve any near miss situations.
• Report all actual, near misses and potential accidents for further investigation.
• Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently.
• Assist in project commissioning and validation activities as necessary.
• Perform task in assigned process train, which includes day to day operation, equipment & line cleaning and documentation.
• Perform operator care, identify and address equipment training observations that require mitigation action and/or raise work order to get back to desired condition.
• Develop courses of action and drive implementation of solutions

Requirement

• Nitec / Diploma in Chemical Process Technology or relevant field of studies

Interested to find out more:

Please send your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599
Recruit Express Pte Ltd Company Reg. No. 199601303W

Responsibilities

· Enter prescription information including but not limited to: patient searches, prescriber searches, drug selection, prescription interpretation, insurance billing, and basic documentation.

· Dispense medicine when needed

· Accept customer and prescription information required to process new and refill prescriptions, including refill authorization from doctor offices.

· Retrieve medication from inventory.

· Create prescription labels and put them on prescription containers.

· Place medication into prescription containers.

· Complete paperwork related to filling prescriptions and input customer and prescription data into the computer.

· Assist with maintaining the Pharmacy department by keeping it clean and in order.

· Assist in inventory management processes including order review, inventory returns, restocking shelves, and physical inventory preparation.

Requirements

· Min Dip / Deg in Pharmaceutical Science / Pharmaceutical Chemistry / Other relevant certification

· Meticulous and a team player

· Good communication skills

· Knowledge of MS Word, Excel

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Thank You.

Victoria Yam Wen Ting
R21103142
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Senior Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.
• Design, simulate, and implement high-temperature electronic systems, including component selection, qualification, and PCB assembly.
• Conduct functional and qualification testing of designed PCB boards and sub-assemblies.
• Prepare technical reports and presentations to document and communicate results.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

About the Company:

Addept3D is an AS9100-certified 3D printing firm that provides additive manufacturing systems and services for manufacturing large metal components and structures. With strong expertise in wire-based additive manufacturing, Addept3D employs proprietary technologies from its strategic partner, WAAM3D, to offer companies across different industries a suite of effective solutions for their manufacturing needs.

Established in 2021, Addept3D is a joint venture between Accuron Technologies and WAAM3D.

Additive Manufacturing (AM) Senior Technician (3rd Shift – 11 PM to 7 AM)

As a Senior AM Technician, you will assist the AM engineers in operating and managing the WAAM printing equipment. Your responsibilities will include:

• Set up, operate, and monitor large-scale robotic 3D printing equipment to produce parts according to Job sheet specifications.
• Prepare and load materials into the 3D printers, ensuring proper fixture, alignment and configuration.
• Monitor the printing process, perform regular inspections, and make necessary adjustments to maintain print quality and prevent issues.
• Follow standard operating procedures (SOPs) and safety guidelines to ensure a safe and efficient working environment.
• Maintain up-to-date production records and reports, accurately documenting work performed.
• Update the Supervisor on job status and report any non-conformance issues raised during fabrication.
• Perform equipment preventative maintenance.
• Perform other duties and responsibilities as assigned.

Qualifications, Key Skills & Desired Qualities:

• Higher Nitec/Nitec/ ITE Skills Certificate (ISC) or Certification in Welding or equivalent.
• 1 - 3 years of relevant experience in a manufacturing or production environment or similar advanced welding techniques.
• Able to work on permanent 3rd shift (11 PM to 7 AM).
• Able to work independently with a positive attitude and a team player.
• A good understanding of welding techniques.

If you are a skilled CNC Tool Manufacturing Technician with a passion for precision engineering and are considering a career in Additive Manufacturing (AM), we invite you to apply. Training will be provided.

Working Days: Monday to Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,700 – $3,000 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: (Gul Circle)

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

Job Requirement:

• Nitec or Diploma in Chemical engineering/ bioscience and relevant
• With 1 year experience is preferably
• Short notice is advantageous

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Junior Service Technician (Water Filters and Water Purifier)

Salary: $1,800 - $2,400 (depending on experience)

Working Hours: Mon - Fri (9am - 6pm)

Office Location: near Redhill MRT

Job Scope:

• Assist in the installation, testing, and commissioning of equipment or systems.
• Perform service maintenance, repairs, inspections and basic troubleshooting
• Support the senior technician in diagnosing and repairing equipment malfunctions.
• Provide basic technical support and respond to client inquiries when required.
• Manage tools and materials responsibly, ensuring proper storage and inventory.

Requirements:

• Basic understanding of technical systems and tools
• Physically fit to perform hands-on tasks and comfortable working in various environments
• Training provided

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Job Responsibilities:

1. Project Planning and Coordination:

• Develop detailed project plans, schedules, and budgets for the LRT Train.
• Ensure the integration of design, engineering, procurement, and construction phases.
• Coordinate with various teams, including civil, mechanical, electrical, and software engineers.

2. Risk Management:

• Identify potential risks (technical, financial, operational) early in the project.
• Develop strategies to mitigate risks and ensure smooth project execution.

3. Resource Management:

• Manage resources such as labor, materials, and equipment.
• Oversee procurement processes for materials and services needed for the project.

4. Quality Control:

• Ensure the project complies with safety standards, quality control procedures, and regulatory requirements.
• Supervise inspections, audits, and testing of materials and work.

5. Progress Monitoring and Reporting:

• Track project progress against timelines and deliverables.
• Provide regular updates to senior management, stakeholders, and regulatory bodies.
• Address any deviations from the schedule or budget.

6. Problem-solving and Decision-making:

• Resolve issues related to construction, engineering, or delays that might impact the project’s schedule or budget.
• Make decisions on technical matters that could affect the overall success of the project.

7. Project Closeout:

• Ensure all deliverables are completed, and the MRT system is handed over to the operational team.
• Organize the final inspection and commissioning process.

Requirements

1. Educational Background:

• A degree in Civil Engineering, Mechanical Engineering, Electrical Engineering, or Locomotive
• Certifications in Project Management (e.g., PMP, PRINCE2) are often preferred.

2. Experience:

• Significant experience (5+ years) in managing large infrastructure projects, especially in transport or construction industries.
• Previous experience in MRT or rail projects is highly advantageous.

3. Technical Skills:

• Familiarity with project management software (e.g., MS Project, Primavera).
• Knowledge of the MRT system design, construction, and operational requirements.
• Understanding of safety standards and environmental regulations.

4. Leadership and Communication Skills:

• Strong leadership to manage and motivate teams.
• Excellent communication and interpersonal skills to manage relationships with stakeholders.

5. Problem-solving Ability:

• Critical thinking to resolve issues related to project design, execution, or regulatory challenges.

Key Responsibilities:

1. Machine Maintenance: Perform routine checks, repairs, and preventive maintenance on machinery to ensure efficient operation and minimize downtime.
2. PLC Programming: Modify and troubleshoot PLC programs (Mitsubishi and Omron) using GX Developer and CX Developer software to optimize machine functionality.
3. Technical Systems Handling: Maintain and troubleshoot pneumatic, hydraulic systems, and associated components effectively.
4. Electrical Expertise: Interpret electrical drawings and ladder diagrams to support maintenance tasks and machine modifications.
5. Production Support: Prioritize repairing and improving production machinery to enhance performance, reduce breakdowns, and improve part quality.
6. Process Optimization: Identify and resolve production bottlenecks to improve efficiency, and recommend corrective measures for machinery improvement.
7. Safety & Compliance: Ensure repairs and modifications adhere to safety standards and participate in developing and reviewing safety protocols.
8. Collaboration: Work with cross-functional teams and supervisors to achieve quality, productivity, and cost-reduction goals.
9. Audit & Documentation: Compile accurate documentation, assist in audit protocol development, and ensure adherence to quality standards (e.g., IATF 16949, ISO14001).
10. Continuous Improvement: Plan and execute improvement projects, coordinate departmental objectives, and maintain a clean, organized, and safe work environment.

Other Information

• At least a tertiary education in Engineering field
• Welcome candidates without experience

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to [email protected] or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

Job Responsibilities:

• Perform inspections, maintain instrument calibration, and apply quality techniques (e.g., Six Sigma)
• Audit/review/approve final product assemblies
• Coordinate inspection support for validation and projects
• Create Certificates of Analysis/Conformance

Requirements:

• Minimum ITE/Diploma in Engineering
• Basic CAD drawing knowledge
• Proficiency in Microsoft Office
• At least 1-2 years of relevant experience

Benefits:

• Birthday Leave (for use in the birthday month only)
• Medical Leave/Hospitalisation Leave (as per MOM regulations)
• Comprehensive Medical Benefits (GP, Hospitalisation, Specialist, TCM, Dental)
• Monthly Fruit Day (Week 1 of every month)
• AWS/Performance Bonus (subject to company performance after 1 year of service)

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

Job Responsibilities:

• Perform mechanical assembly operations and handle inventory
• Utilize tools like soldering irons, heat guns, crimpers, and automatic wire strippers
• Support first-time production runs and continuous improvement initiatives
• Meet daily production output and quality requirements

Requirements:

• Minimum GCE “N” Level/“O” Level/Nitec/Higher Nitec/Diploma
• 1-2 years of relevant experience
• Basic knowledge of hand tools and Microsoft Office

Benefits:

• Birthday Leave (for use in the birthday month only)
• Medical Leave/Hospitalisation Leave (as per MOM regulations)
• Comprehensive Medical Benefits (GP, Hospitalisation, Specialist, TCM, Dental)
• Monthly Fruit Day (Week 1 of every month)
• AWS/Performance Bonus (subject to company performance after 1 year of service)

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

1 year contract Aerosol Technician (5 days, office hours) #HAN

Responsibilities

• To execute daily work within the control room:
• control room operation
• routine maintenance of pumps, SM, ventilators
• study set-up (glassware)
• qualification of smoke protocol
• test smoking
• aerosol measurement
• instrument calibration check

• To assist in planning of test substance preparation and conditioning.
• Assist in development of standard operating procedures and work instructions
• To prepare daily report
• To run experiments to study the background of aerosol technical aspects.
• To assist in configuring the control room data acquisition application(s) as needed.
• To organize and conduct the practical aspects of additional measurements such as particle size determination.

Requirements:

• Minimum Diploma/Degree in science related fields
• Minimum 1 year of relevant experience

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Alvin Lee Peck Keong
CEI No.: R1104781
Recruit Express Pte Ltd, EA License No.: 99C4599

Responsibilities:

• Plan, coordinate and oversee the installation and maintenance of internal systems of hardware, software and networks.
• Implement and manage security protocols, including access controls, backups and firewalls.
• Monitor, troubleshoot IT systems, including security system and networking.
• Manage servers, email systems, CCTV, HR system and others.
• Set up user accounts and PC workstations, Apps etc.
• Ensure the efficiency and reliability of IT infrastructure.
• Support web development and maintain Company portals.
• Maintain and support the Dynamics NAV ERP system.
• Conduct programming and develop Apps to support business operation.
• Provide IT support to internal and external users as needed.
• Maintain all IT related documentation and policies up to date.
• Perform other tasks as required.

Requirements:

• Minimum Diploma in IT, Computer Engineering, or a related field.
• At least 2 to 3 years of programming experience.
• Knowledge of system security, networking and database management.
• Good programming skills, with app development experience is a plus.
• Familiarity with access control, CCTV, and alarm systems is an advantage.
• Highly adaptable with a fast-learning ability.
• Experience supporting: Microsoft Dynamic Navison ERP
• Experience supporting User, Network

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

We regret that only shortlisted candidates will be contacted.