Responsibilities

• Maintain, Migrate, Support and Troubleshoot Operating System like RedHat/UNIX/LINUX.

• Handling preventive and corrective maintenance requests such as version upgrade, patch etc.

• Experience in the areas of physical system and storage hardware, storage management software and storage networking including disaster recovery.

• Perform 24 x 7 standby duties, if required.

Requirements

• Degree / Diploma in IT with at least 2 – 3 years of hands-on technical working experience mainly in RedHat/UNIX/LINUX.

• Working experience with VM virtualization, Patch management, networking, security, and administration of Linux, RedHat or UNIX related Operating System.

• Working experience with physical server such as HPE Proliant, Dell Server etc.

• Knowledge of SAN, ISCSI, NAS, DFS, SMB, NFS, SFTP and other backup and restore technology.

Licence No: 12C6060

Location: 39 Changi North Crescent Singapore 499642

Entity: Goodrich Aerospace Pte Ltd (MRO Site)

Specific Role Responsibilities:

• Perform work at cell level to meet the production schedule.
• Assemble, disassemble, perform minor cleaning, inspect, troubleshoot, and test in accordance with Component Maintenance Manual.
• Promptly resolve issue and ensure all repair cost estimates are updated accurately.
• Work in close cooperation with supervisor and other support personnel to resolve problems as when necessary.
• Adhere to Quality Management System (e.g. AS9110C / Airworthiness Part 145 requirement)
• Understand the use of common measuring equipment like torque wrench, calipers, micrometers, bore and depth gauges.
• Complies with all Environment, Health & Safety policies, and regulations
• Complies with all US and Singapore Export Control Regulations
• Actively participate in process improvement and environmental, health and safety activities.

Requirements

• NITEC/Higher NITEC/Diploma in Engineering (Mechanical / Mechatronics /Electronics/ other Aerospace related courses)
• Personnel with passed in Air legislation CAAS/ EASA papers L12/ L11/ M10, or other industry related qualifications would have added advantage.
• Preferably with degree or diploma in engineering.
• Ability to read, write and understand English.
• To read and work from technical and service manuals, technical orders, sales orders, specification, drawings, and other written instructions.
• Computer literacy (Knowledge in SAP will be preferred).
• Good communication skills needed, both oral and written.
• Candidates with no prior aviation experience are also welcomed to apply (Training will be provided)

Job Description

• To carry out installation, repair and preventive maintenance of MFP devices
• Configure Printer drivers and Scan configuration
• Ensure use the ticketing system for proper record
• Ad hock duties assigned

Requirement

• Preferred more than one year of experience in Printers and Copiers machines
• Candidates whom possess own motorbike will be an advantage

Company’s Profile

As a market leader in industrial vehicles, they have over 4 decades of experience in the automotive industry. They lease many high-end vehicles to their 41,000 customer base and have been customers’ first-choice partner for many years. They are currently looking for a service technician to value-add to their business.

Location: Pioneer

Working Hours: Mon – Fri, 8.30am – 5.30pm

Responsibilities:

• Servicing and repair of material handling equipment i.e. diesel and electric fork lift / MHE
• Troubleshoot and rectify MHE issues
• Other tasks as assigned by workshop supervisor

Requirements

• Possess Class 3 Driving License
• Bonus if have 1 year of experience in electrical / diesel forklift OR experience in automotive / industrial equipment repair

Your recruiter for this job: WhatsApp Celine @ 84940873 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Interested candidates may apply directly as well. For more job opportunities, follow SnatchJobs on Telegram: https://t.me/sgfulltimers

Celine Chan | R21103433

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Requirements:

✅Equipment servicing, repair and maintenance such as hydraulic excavators, concrete pumps, and truck

✅Carry out diagnostic, troubleshooting and rectification work

✅ Able to communicate with customers on machine fault explanation

Requirements:

• ITE/Diploma in Automotive/Electrical/Mechanical/Mechatronics
• Min 2 years in repair and maintenance of heavy equipment or truck
• Hand on troubleshhoting in hydraulic & electrical systems
• Able to read blueprints and diagnose to rectify problems
• Familiar with components of automotive engines
• Possess a class 3 driving licence

Interested applicants, please send in your updated resume by clicking “Apply Now”

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

Job Description

• Industry/ Organization Type: Pest Control Service Provider
• Position Title: Pest Control Technician
• Working Location: Island wide
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 2800 + Personal Incentive + AWS + OT Pay
• Duration: Permanent

Key Responsibilities

• Conduct thorough inspections and implement suitable pest control techniques to eliminate and manage pest presence, ensuring client satisfaction with our services
• Execute pest eradication services within residential, commercial, industrial, and food and beverage premises, with a primary focus on food and beverage outlets
• Deliver detailed service reports to clients following each session
• Offer tailored advice to clients to help manage, reduce, and avert future pest problems
• Carry out other related tasks assigned

APPLY NOW!!!

• Training provided to an inexperienced candidate
• Must have own transport
• Comfortable to standby on Sunday
• Will arrange for course enrolment if required
• No need to report to the office

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66127 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description & Requirements

• Moves raw material and process solvents received by Production Warehouse personnel
• Loads production equipment and conducts activities aimed to put instruments, services and plant in the right conditions
• Documents all the activities executed
• Housekeeping duities of the lab and operations of the department areas
• Any other general administrative duties/ad-hoc projects as assigned by immediate supervisor

Requirements:

• Minimum Nitec in Chemical Engineeering or Chemical Technology or any Science related courses or above
• Minimum internship experience
• Comfortable to do a shift work
• Able to start immediate or within short notice

If you meet the requirements of this role, please email a detailed resume in Word document to Cindy Wong Xinyi

CEI Registration No.: R2095121

Email: [email protected]

Tel: 9666 7710

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.

EA License No: 99C4599

EA Personnel No: R2095121

Benefits Summary:

• Up to $3500
• 5 days (Alt Sat)
• Working Location: Tuas

Responsibilities:

• Performing maintenance, repair and overhaul work on heavy vehicles
• Perform major repair on engine and transmission
• Test the functionality of parts and systems
• Adhere to defined guidelines in regards to safety, orderliness
• Other ad-hoc duties

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:
https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on WhatsApp for more details:
https://wa.me/6582693981

Follow us on Telegram for more job opportunities:
https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Job Responsibilities:

Sitting within Information Technology Department, the Systems Analyst is responsible:

• Manage the technical requirements and technical design aspects of the project.

• Analyse the Authority’s needs, scope the problem and develop technical use case to address the problem.

• Map and review the business requirements to technical design.

• Document requirements, source and evaluate alternatives, and recommend solution that best fits the Authority’s needs.

• Work with the Authority’s users to ensure smooth deployment and adoption of new solution.

Perform analysis.

a. Technical Analysis Planning and Monitoring: Identify stakeholders, techniques, and processes to manage, track and trace requirements.

b. Enterprise Analysis: Refine and clarify business need, define solution scope, and develop use case.

c. Requirements Analysis: Assess current state, analyse stated requirements of stakeholders, and elaborate to sufficient detail that accurately defines business need within specified scope.

d. Solution Assessment and Validation: Source and evaluate alternatives to identify solution that best fits business need, identify gaps, and determine workarounds/changes to the solution. Assess deployed solutions to see how well they met the original need.

e. Manage conflicts, issues, and changes to ensure stakeholders and project team remain in agreement on solution scope, communicate and manage expectations of stakeholders.

Technical Skills Set and Experience

a. Writes clearly and articulate technical documentation.

b. Experience in development (.NET framework preferred), secure coding, DevSecOps process and support/maintenance of existing system.

c. Prepare end user documentation (training manual, user manual, business process flows) on the operation or maintenance of technical systems.

d. Assists with the documentation of technical design, specification, and technical solution.

e. Ability to interact with SMEs (Subject matter Experts) and grasp a good technical understanding.

f. Gather user feedback to update and improve documentation content.

g. Maintains document repositories used by project teams and assists with project documentation as needed.

Requirement

• Tertiary Education in relevant fields is preferred.

• Hands-on experience in full project development life cycles

• Past track record in business analysis, application solutioning and design

• Analytical, conceptualisation and problem-solving skills.

• Ability to model business requirements in business process modelling tool.

• Ability to perform qualitative, quantitative, and root-cause analysis.

• Pro-active, resourceful, and self-motivated to innovate and take smart risks to achieve business goals.

• Ability to facilitate discussions/workshops to elicit, manage and prioritise key business needs.

• Ability to take a broad, strategic perspective as well as drill deep to understand business needs and challenges. • Knowledge in one of the following areas will be added advantage, Agile Methodology, Cloud Technologies, Container Technologies, and Knowledge Management.

• Knowledge in Singapore government securities will be an added advantage.

• Knowledge of Singapore Authority procurement and governance processes will be an added advantage.

• Knowledge of design thinking and workshop facilitation will be an added advantage.

• Results and customer oriented.

• Team player with strong organization and people handling skills.

• Good communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Reading repair manuals and liaising with other professionals.
• Running tests and interpreting results to make effective recommendations.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Sourcing replacement parts.
• Negotiating with suppliers and clients.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.
• Keeping abreast of advancements in your field and attending workshops as required.

Technician Requirements:

• High school diploma.
• A relevant degree, certification, or license may be required.
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

• Performs inspections, testing and troubleshooting on electrical & mechanical of marine hydraulic systems.
• Performs preventive maintenance procedures on equipment.
• Carry out repairs on various marine products, both mechanical & electrical systems on Marine and offshore installations.
• Prepare reports from attended jobs.
• Participate in vessel dockings and work at shipyards.
• Adhoc duties as assigned.

Requirements:

• Diploma in Mechanical/ Electrical or Marine Engineering.
• Knowledge in PLC based control systems and/or Hydraulic systems.
• Automation or instrumentation experience an advantage
• Prefer 2-3 years of experience in Marine Hydralius System.
• Possess good initiative, customer oriented and action oriented.

West/Tuas Area (Tpt Pick up at CCK MRT /Boon Lay Mrt)

5 days work week

European MNC

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

• Provided first/second level trouble shooting & resolve production stoppages due to equipment issues.
• Monitoring and control facilities equipment.
  Replenished production material where applicable in the respective workstation.
• Performed process control checks where applicable.
• Participated in preventive maintenance & calibration checks for production and measuring equipment as scheduled
• New production line setup and fit-out works.
  Utility setup and equipment move-in, move out document submission.
  In charge for facilities equipment and maintenance of compressor & exhaust system, HVAC, ACMV

Requirements

• Min Nitec in Mechanical Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in HVAC/ACMV

Interested candidates who wish to apply for the advertised position, please APPLY with an updated copy of your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Successful candidate will be under general supervision by Field Commissioning Engineers/Discipline Leads, to assist in the coordination of the Commissioning Technicians in the Commissioning activities on Process, Topsides, Marine and Turret systems.

You must be capable to demonstrate a full understanding of all applicable policies and work methods associated with assigned duties to commission and maintain instrumentation equipment and to perform other duties as required.

The Senior Technicians shall have minimum ten years of relevant industrial experience, five years of which shall have been in oil and gas or petrochemical industries, including extensive previous commissioning experience on FPSO projects. They will be fully conversant with the applicable National / International Codes and Standards. He/She must be able to perform a variety of commission, troubleshoot and repair of various electrical equipment including, but not limited to, MCC’s, VSD’s, distribution panels, motors, lighting and small power circuits.

Duties and Responsibilities

As for the Discipline Technicians with additional responsibilities as described below:.

• Communicate clearly and precisely.
• Understand the need for and adherence to the Permit to Work and Lock-Out Tag-Out Procedures.
• Understand and follow safe working practices.
• Follow oral and written instructions.
• Be instrumental in the preparation, lodgement and implementation of all relevant Permits.
• Be directly responsible for the preparation, planning and execution of the daily commissioning activites.
• Co-ordinate the technicians activities.
• Establish and maintain positive and effective working relationships with supervisors, fellow workers and vendors.
• Coordinate activities with other departments.
• Ability to supervise workers to assist in commissioning.
• Assist in providing training for less experienced personnel.
• Good timekeeping practices.
• Preparation and submittal of MC and PC dossiers for handover to operations.
• As Building of documents and drawings.

EEHA (Ex) Qualifications

Preference will be given to Senior Technicians that hold current qualification in line with the requirements of IEC 60079-14 for installation, inspection and commissioning of EEHA equipment. These qualifications shall include the following:

• IECEx units Ex 001, Ex 003, Ex 006, or
• AS/NZS 4761.1 units 2.2, 2.4, 2.5, 2.6; or
• CompEx units Ex-01, and Ex-03

• A service technician, or skilled service worker, is responsible for providing technical repair and service work either in a facility or in the field. These professionals may install and service a wide range of hardware depending on the technician’s specific industry. Service technicians may work on vehicles, heavy machinery and home appliances or in many other areas where complex hardware needs to be maintained or fixed. Their responsibilities include diagnostic review, repair and replacement of parts as well as the replacement and installation of equipment.
• Installing new hardware and complex products while ensuring that they work correctly and safely
• Educating the hardware users about the correct use and upkeep of their products
• Repairing broken-down or damaged equipment either in the field or at a diagnostic and repair center
• Assessing hardware and installation functionality and preparing reports about maintenance and repair work that they have performed
• Persuading customers to invest in necessary replacements or vital repairs to key components and hardware devices
• Handling customer relations in a professional and friendly manner
• Explaining complex installation, diagnostic and repair issues in a way that’s accessible to a nontechnical audience

1. Assist to the Engineering Manager to overview the engineering and design aspect upon confirmation of project. Based on Technical Agreement/ Specification, GA. Contract Requirement, and Scope of supply etc. via contract review to carry out design.
2. Co-ordinate with Engineering Manager, Purchasing Department and Production Department to generate drawings.
3. Preparing Drawing and submit for Approval; liaise with Customer/ Class on Technicality aspect to finalized on the design.
4. Based on Feedback/ Comments to prepare Working Plan incorporating all comments, and assist to Purchasing Department on the Material Requisition for Clarification of Approval.
5. Generate Test Protocol based on design output for the Commissioning Engineer and submit for approval. And prepare Instruction Manual and “Final Drawings” for Submission.
6. Carry out product inspection and in-charge of product quality conforming to Standard; issue Non-conformance Report for Irregularity and assist in Rectification.
7. Seek and improve performance of product/ equipment and production process.
8. Attend to site meeting and inspection to verify work carry out by production team and provide solution to solve difficult site problem.
9. Liaise with GM, Production Department for the range of standard product and detail design of all in house products.

REQUIREMENT

1. Degree in Marine Engineering of HVAC System/Equivalents.

2. At least Three (3) Years Related Experience in HVAC System.

3. Good Office Coordination Skill/Interpersonal Skill.

4. Independent and Resourceful.

5.Expert in Microsoft Office and Auto Cat Software.

Summary

This role is to service and repair material handling equipment and provide good customer service to ensure customer satisfaction.

Job Description

• Analyse, diagnose and rectify issues on material handling equipment.

• Carry out electrical, electrical and hydraulic repairs on equipment and components.

• Perform scheduled preventive maintenances.

• Perform modification, commissioning works.

• Undertake Supervisor’s Instruction

• Perform stock take

• Provide support and guide new colleagues

• Attend trainings

Requirements

• Strong Electrical, mechanical, hydraulic knowledge

• Good computer skills

• Able to speak and write English for handling English speaking people

• Diploma in Electrical / Electronics / Mechatronics / Automotive

• At least 2 years’ experience in the technical field such as MHE, cranes, marine equipment, industrial vehicles.

Location: Biopolis

Duration: until 30 Jun 2024

Mon-Fri office hour

1. Routine laboratory testing on raw materials or finished products, media preparation and non-routine testing (special projects)

2. Set up and maintain bacteria culture and mammalian cell culture based on available SOP/ protocols.

3. Perform various microbiology, cell-based and biochemical/ molecular biology in vitro and ex vivo assays for various projects

4. Perform routine lab housekeeping

Requirement

• Min. Diploma in Science or related disciplines, microbiology background will be preferred.

• A team player with out-going personality, a passion for research and is detail-oriented at work.

• Good organizational, communication and coordination skill to multi-task and meet deadlines as needed.

• Possess intermediate skills in Microsoft Office suite of software

• Having prior knowledge in Life Sciences (Molecular Biology, Cellular Biology, biochemistry etc.) will be an advantage.

If interested, please email me at [email protected]

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

Responsibilities:

• Analyze technical inquiries and evaluate client specifications
• Establish technical, application, and process design support.
• Prepare a quotation, including technical specifications and cost estimates for equipment or solutions, tailored to customer needs and budget.
• Develop a technical presentation for the customer.
• Communicate with the manufacturer or a representative to obtain an estimate.
• Collaborate with the draftsman to create the layout and process flow diagram or flowsheet.

Requirements:

• Min diploma in Mechanical, electrical, chemical or it’s equivalent
• At least one year related sales experience
• Prior sales experience in processing equipment/system is an added advantage
• Good communication skills

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• General workshop duties as assigned by the Workshop supervisor which may include:
• Assist with mechanical equipment repairs, overhaul & maintenance.
• Assist with other ongoing projects/jobs as and when required depending on need.
• Maintenance of workshop equipment
• General housekeeping and 5S duties.

Requirements:

• Previous work within a workshop environment.
• Mechanical competence.
• Good command of English both verbally and written.
• Basic computer skills.
• Can work both independently and as a team.
• Physically fit.
• Work flexible hours on occasions.

5 days work week

Tuas Area (Co. Tpt pick at Boon Lay MRT & CCK MRT)

Marine Engineering Co.

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Responsibilities

• Responsible for Market Data requirements & analysis for Market Risk (VaR, ES) projects and risk regulatory initiatives like FRTB-IMA.
• Come-up with BRD, FSD and other documents like traceability matrix for Historical Market Data backfilling, proxying, historical scenarios (shocks) generation & establishing data mappings across various Risk Factors in Market Data domain
• Collaborate with business stakeholders Market Risk Business, technology team to help finalise requirements and deliver solution.
• Assist with completion of System Integration Testing (SIT), User Acceptance Testing (UAT), application performance testing.
• Prepare and manage technical implementation plan across application teams - coordinate technical implementation activities across application teams to ensure non-event production cutover and adequate post implementation support
• Responsible for Shell / Batch scripting.

Requirements

• Experience end to end technical knowledge and business analysis skills on all key market data modules like Data Sourcing from various market data vendors, Backfilling, Calibration & Historical Scenarios.
• Experience in Historical Market Data Domain to cater to Market Risk requirements for data sourcing from various market data vendors (like Bloomberg, Refinitiv, ICE, MarkIT), backfilling, calibration, proxy & historical scenarios generation for VaR & ES.
• Good Business Analysis experience in data sourcing from various market data vendors, backfilling, curve computation (calibration), proxy, stress scenarios & historical scenarios generation for Market Risk and Regulatory requirements
• Cater to various historical market data requirements for historical scenarios for Murex upgrade
• Extensive knowledge of various market data instruments such as equities, commodities, FX, IR curves, options, volatilities etc.
• Experience in any of EDM/MDM market data product like Neoxam, Asset Control, Golden Source, MarkIT etc.
• Minimum of 7 years of experience in analysing requirements and tracking delivery of IT capabilities
• Good problem solving, analytical, synthesis, system thinking and solutioning skills
• Experience in scripting/coding capabilities in either one or more of the following skills: Python, R, Windows batch/Unix shell scripting, java script, SQL, PL-SQL, vendor proprietary language etc.

Sumit Sambhi

EA License No. – 23C2060

EA Registration No. - R1330510

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Company’s Profile

As a market leader in industrial vehicles, they have over 4 decades of experience in the automotive industry. They lease many high-end vehicles to their 41,000 customer base and have been customers’ first-choice partner for many years. They are currently looking for a forklift technician to value-add to their business.

Location: Pioneer

Working Hours: Mon – Fri, 8.30am – 5.30pm

Responsibilities:

• Servicing and repair of material handling equipment i.e. diesel and electric fork lift / MHE
• Troubleshoot and rectify MHE issues
• Other tasks as assigned by workshop supervisor

Requirements

• Possess Class 3 Driving License
• Bonus if have 1 year of experience in electrical / diesel forklift OR experience in automotive / industrial equipment repair

Your recruiter for this job: WhatsApp Celine @ 84940873 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Interested candidates may apply directly as well. For more job opportunities, follow SnatchJobs on Telegram: https://t.me/sgfulltimers

Celine Chan | R21103433

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Alexandra Hospital

Senior Care Manager

Job Purpose

The Senior Care Manager supports and works within Alexandra Hospital, and collaborates with community service providers, government agencies, and multi-disciplinary hospital and healthcare teams to provide coordination and continuity of patient care across the healthcare continuum; to support patients and their family members in navigating their healthcare journey with Alexandra Hospital within the Queenstown community.

Duties and Responsibilities

• Recruit high risk patients through Multiple Disciplinary Meetings, referrals, and screenings.
• Triage and assess patient's medical-nursing, psycho-social, functional status and daily activity needs; as well as their existing support system availability upon enrolment into programme.
• Synthesize assessment information to prioritize care needs and develop care plan goals together with patient, family/caregiver and the community care team.
• Implement appropriate care coordination and transitional case management; and evaluate the outcomes accordingly.
• Work in partnership with patients and families/caregivers on the various ranges of services and available options in the patient’s community. Coordinate the necessary referrals accordingly and in a timely manner.
• Provide a valuable link by ongoing collaboration among the patients, families/caregivers and the multidisciplinary teams on a timely basis.
• Conducts assessment and follow-up via phone calls and/ or home visits to ensure smooth coping of patients and caregivers
• Promote and guide positive changes in patient’s lifestyle in the community.
• Monitor patient’s general medical condition during home visit and report to patient’s Principal Doctor or primary care provider and/or community partner where necessary.
• Educate and promote advanced care planning, assist patients and their families/caregivers in planning for and improving end of life care, ensuring that choices are reflected in personalized care plans.
• Document assessments, plans, and outcomes promptly and accurately in the relevant systems.
• Maintain high level contact WX1] with step-down facilities.
• Advocate for patients and their families/caregivers; and form strong relationships with community partners in order to work in the patient’s best interests.
• Partner with various community partners and be able to station within community healthcare posts in Queenstown where residents can be cared for conveniently within their community.
• Support Team Manager and counterparts in team operations.
• Provide consultation and/ supervision on the practice of patient management to junior/ new Care Managers.
• Lead and support the professional development of the team in relevant areas of knowledge, skills and attitudes.
• Develop and review protocols, case management tools and work processes for the improvement of patient care.
• Initiate and/or participate in activities that contribute towards the improvement of patient care.
• Lead and/ or participate in projects.
• Any other duties as assigned by Reporting Officer.

Requirements

• Degree or equivalent professional qualifications in Nursing, Social Work or Allied Health.
• 6 to 8 years of experience in nursing or case management or related field in acute and/or community setting in Singapore is preferred.
• Knowledge in geriatric care or palliative care, and experience in home medical care and community will be an advantage.
• Strong team-player, with natural ability to interact with healthcare staff and community partners of all levels.
• Organised, analytical, able to fit different pieces of the puzzle together.
• Pleasant disposition, approachable, with strong interpersonal and relational skills.
• Good verbal and written communication skills. Ability to use local languages and dialects will be an advantage, especially coupled with experience interacting with and managing patients and caregivers.
• Independent worker, with strong initiative.
• Comfortable with ambiguity, unchartered territory, enjoy challenges and problem solving.
• Equipped with basic computer skills in MS Words, Excel and PowerPoint.

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

*Only Singapore Citizens and Singapore Permanent Residents may apply