Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Responsibilities :

• Planning / Scheduling and coordination of M&E works
• Review and align M&E design drawings to ensure compliance with specification and guidelines.
• Responsible for on-site technical & engineering matters and quality checks.
• Oversee and ensure works is carried out in accordance with the approved drawings, materials and method statements.
• Conduct joint inspections with RTO.
• Ensure M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulation.
• Coordinate and work closely with client, sub-contractors and project team to resolve all M&E drawings, site discrepancies and technical issues
• Manage M&E sub-contractor's work progress, drawings, materials, samples, method statements submission and approval.
• Coordinate M&E works with Client’s representative, consultants and sub-contractors on technical matters.
• Attend project meetings; liaise and coordinate with clients, consultants, relevant authorities and sub-contractors on M&E issues and challenges

Requirements :

• Degree / Diploma in Mechanical, Electrical or equivalent
• Minimum 3 years of relevant experience
• Good communication and interpersonal skills

Job Description:

• Architect and lead the development of high-performance, distributed backend systems.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure system reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in backend development, with experience in leading large-scale projects.
• Mastery of programming languages and frameworks (e.g., Go, Python, Java, Node.js, Spring, Django).
• Extensive experience with distributed systems, caching mechanisms, and messaging queues.
• Advanced knowledge of DevOps practices and CI/CD pipelines.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job Description:

• Architect and lead the development of high-performance, user-centric frontend systems.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure frontend reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in frontend development, with experience in leading large-scale projects.
• Mastery of modern frontend frameworks and libraries (e.g., React, Angular, Vue.js).
• Extensive experience with frontend optimization techniques and performance profiling tools.
• Advanced knowledge of web accessibility standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job Description:

• Lead the design and development of complex, scalable iOS applications.
• Mentor junior engineers and contribute to team growth.
• Collaborate with cross-functional teams to gather requirements and deliver solutions.
• Optimize application performance and ensure high-quality user experiences.
• Implement security best practices to safeguard user data.
• Drive continuous improvement in development processes and tools.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 3-7 years of experience in iOS development, with a proven track record of delivering complex applications.
• Expertise in Swift and Objective-C for iOS development.
• In-depth knowledge of iOS architecture components and MVVM/MVP patterns.
• Familiarity with tools like Xcode, CocoaPods, and Fastlane.
• Excellent communication and leadership skills.

Job Summary:

We are seeking a highly skilled and experienced Project Controls Engineer to join our dynamic team. The successful candidate will be responsible for planning, scheduling, cost control, and risk management for engineering projects. This role requires a proactive individual with strong analytical skills and the ability to work collaboratively with project teams to ensure successful and optimized project delivery.

Key Responsibilities:

• Monitor project progress and performance, identifying and addressing any deviations from the plan.
• Prepare and present regular project status reports to management.
• Implement and manage cost control systems to track project budgets and expenditures.
• Preparation of project review documentation, Cost-to-Complete reviews, developing templates if required.
• Analysis of Resource Deployment schedule.
• Supporting PMs on CTC Projections, Client and Subconsultant invoicing etc.
• Preparing / developing dashboards and using internal ERP or PowerApps
• Conduct risk assessments and develop mitigation strategies to minimize project risks.
• Collaborate with project managers, engineers, and other stakeholders to ensure alignment on project objectives and deliverables.
• Analyze project data to identify trends, variances, and opportunities for improvement.
• Experience in developing and maintaining project schedules using industry-standard software (e.g., Primavera P6, MS Project) would be a great asset
• Ensure compliance with company policies, procedures, and industry standards.

Qualifications:

• Bachelor’s degree in Engineering, Construction Management, or a related field.
• Certified Cost Engineer (CCE), Certified Scheduling Professional (CSP), or Project Management Professional (PMP) certification is desirable.
• Minimum of 7 years of experience in project controls within the engineering or construction industry.
• Proficiency in project management software (e.g., Primavera P6, MS Project)is a great additional asset
• Strong understanding of project management principles, including scheduling, cost control, and risk management.
• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment and manage multiple priorities.

Preferred Qualifications:

• Professional certification (e.g., PMP, CCP) is highly desirable.
• Experience working on large-scale multi-disciplinary engineering projects.
• Familiarity with industry standards and best practices.

Responsible for providing on-site technical support, troubleshooting, and maintenance for IT systems, hardware, and software. This role involves frequent travel to client or company sites to ensure systems are operational and optimized. The engineer will also assist in deploying new technologies, conducting system upgrades, and providing end-user training where required.

• Provide on-site support for hardware and software issues, including desktops, laptops, printers, and network devices.
• Diagnose and resolve technical problems promptly, minimizing downtime for end users.
• Install, configure, and test IT hardware and software as per company or client standards.
• Assist with the setup and installation of servers, routers, switches, and other network equipment.
• Conduct on-site rollouts for new IT projects, including device imaging, software deployment, and system upgrades.
• Conduct routine checks on IT infrastructure, ensuring optimal performance and identifying potential issues.
• Document common user issues and solutions for knowledge-sharing purposes.
• Maintain accurate records of on-site visits, tasks performed, and issues resolved.

Candidates with at least 2 year of relevant experience in Red Hat Linux (On Cloud) preferred

· Plan, execute, monitor and control the various technical aspect of the project.

· Manage or participate in new setup or upgrade of system/network infrastructure projects.

· Responsible for supporting operational systems satisfying contractual Service Level Agreement

· Perform and manage routine preventive maintenance and operational activities

· Provide project documentation and reports

· Diagnose and rectify technical issue

· Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

o AWS EC2 maintenance

· Managing and Operating VMware vSphere IT infrastructure

Other IT Infrastructure Related Tasks

· Red Hat Enterprise Linux (RHEL) and Windows Administration

· Professional understanding of networking related to RHEL and Windows

· Professional understanding of SAN Storage related to RHEL and Windows

· AWS Certified Solution Architect will be an advantage

· Good understanding of large Data Center Facilities operation

· Hands-On experience supporting various Infrastructure agents like NetBackup

· (Mid-Level) vSphere 7.x.

· Cross-team collaboration with storage, network, security and application delivery

· Technical leadership quality to handle technical challenge and sensitive situations

· Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

· Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

· Strong communications skills

· Excellent spoken and written English communication skills

What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Working Hours: Mon to Fri 8.30am-5.15pm
Work Location: Tuas Crescent (Company transport available from Marsiling and Jurong East)

Responsibilities:

• Source and identify suppliers for direct/ indirect materials/ services to expand supplier base and for new project/production needs.
• Obtain quotes from new sources to provide costing information and cost reduction
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/ services.
• Be part of team to conduct supplier qualification audit as well as parts qualification to ensure suppliers can meet company needs.
• Qualify suppliers once suppliers are selected in order to add suppliers into the Approved Vendor List.
• Conduct supplier performance review on a regular basis to manage supplier qualification and updates on supplier capabilities.
• Maintain standard operating procedures applicable to the Procurement department to ensure work flow process are consistence.
• Develop and negotiate favorable supply agreement with suppliers.

Requirements:

• We welcome Degree Holders in Mechanical Engineering without any working experience to apply
• Training provided

To Apply:

Please attach your resume in WORD with the following information :

• Reason for leaving last/ current employment
• Last drawn salary
• Expected salary
• Notice period

(We regret that only shortlisted candidates will be notified)

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Duties and Responsibilities:

a) Monitor compliance to airworthiness regulatory requirements and quality standards

b) Conduct of internal quality audits and vendor audits

c) Facilitate training on regulations and quality related subjects

d) Support Safety Management System program

e) Perform capability evaluation reviews

f) Administrate personnel authorisation approval

g) Conduct quality investigation, analysis and drive corrective actions

h) Maintain Quality related KPIs

i) Comply with Health, Safety and Environment (HSE) regulations as prescribed by local law and company’s policies.

j) Participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

k) Support to in Continuous Improvement Program

l) Any other duties as assigned

Experience and Qualifications:

a) Diploma / Degree holder in mechanical / electrical / electronic engineering or equivalent

b) Relevant CAAS papers qualification or equivalent will be advantageous

c) Minimum 2 years relevant working experience in aviation field is preferred

d) Knowledge on airworthiness regulatory requirements and AS9110 Standards

e) Trained Internal Quality Auditor / Lead Auditor is preferred

f) Safety Management System trained will be an added advantage

g) Good communication and writing skills

h) Knowledge in MS Office (Excel, Word, Powerpoint, Power BI), SAP, etc

i) Willing to work excess hours when required

j) Able to do business travel in short notice

k) Possess knowledge of statistical tools and methodology

l) Good team player and ability to handle tight datelines

The Job:

Act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position.

Preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection.

Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information.

Review piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, providing technical guidance, and organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

The Role:

• Study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

• Assist in planning and organizing piping engineering activities and manpower requirement for the project.

• Assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.

• Coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.

• Prepare piping information list and layout and document list following standard procedure created for the project.

• Prepare piping general specification inclusive of specification for piping arrangement, piping support standards.

• Interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.

• Develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, air fin coolers, heaters, compressors and reactors, preferably in 3D CAD format.

• Check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Provide field engineering support/advice towards piping installation and testing at construction site.

• Perform the function inherent to Piping Key Person as designated by Piping Department Manager.

• Evaluate the performance of and provide counseling and guidance to members of the project.

• Identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.

• Prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.

• Perform other tasks that may be assigned by the Department Manager.

• Carry out engineering support work during the construction phase of the project.

The Requirements:

• Degree of any four years BS Engineering course, preferably Mechanical Engineering or least 15 years related experience and/or training; or equivalent combination of education and experience.

• At least 12 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, and 5 years of which in a supervisory capacity.

• Good knowledge of AutoCAD.

• Basic knowledge of 3D Model review through Navisworks or SPR Software.

• Interpretation of stress/vibration analysis report.

• Able to read, analyze, and interpret common technical information, contracts reports and instructions.

• Able to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.

• Strong leadership qualities and analytical and reasoning abilities.

• Good interpersonal and communication.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $3,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Job Description

• Industry/ Organization Type: Civil Engineering Firm
• Position Title: C&S Engineer
• Working Location: Lavender (near MRT)
• Working Hours: 5 Days, Mon – Fri (8.30am – 6pm)
• Salary Package: Basic Salary + Annual Bonus
• Duration: Permanent

Key Responsibilities

• Perform civil and structural analysis, design development, and impact assessments.
• Oversee the planning, design, and coordination of civil engineering and infrastructure-related designs, as well as site works.
• Ensure that all engineering activities adhere to the relevant statutory requirements, regulations, and industry standards.
• Act as the main point of contact, maintaining communication between project stakeholders, clients, consultants, contractors, and relevant authorities.
• Support the Team Leader in ensuring that design and supervisory work meet high-quality standards.
• Other tasks as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Civil Engineering or equivalent. (Preferably recognized by PEB)
• At least 1 year of design experience in civil engineering projects in consulting firm.
• Good knowledge of authorities’ submission requirements for civil and infrastructure projects is required.
• Familiarity with ground improvement works, civil and structural design, and BIM is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70252 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8AM – 5PM, Sat half day)
• Salary Package: Basic Salary up to $6,800 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Working with professionals for the building and maintenance of Formula One Race Track
• Monitoring of road levels, work out estimates for proposed work and putting up traffic control plan
• Carry out site measurements and prepare job measurements for ordering of required premix
• Planning and supervising of assigned project which includes night work as scheduled by LTA
• Manage race track construction team and adhere to health and safety guidelines
• Undertake risk assessments, deal with client, transport specialists and members of public
• Submit weekly progress report and attend monthly progress meeting
• Ensure machineries and equipment are always kept in good working condition
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG) or Defence Science and Technology Agency (DSTA)
• Prior experience with road construction and resurfacing is required
• Proficient in MS Office
• Class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70470 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Application Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $3200
• Duration: Permanent

Key Responsibilities

• Assist with vision software, GUI, and SDK integration.
• Develop and implement robotic applications and AI functionalities.
• Conduct evaluations and proof of concept, and create proposals for project initiatives.
• Install and provide on-site system support.
• Contribute to R&D efforts for emerging technologies.

APPLY NOW!!!

• Must Diploma/bachelor’s degree in an Engineering or Physics related discipline.
• Candidates with relevant experience but without the education will still be considered.
• Minimum of one (1) year of relevant work experience.
• Able to travel overseas for work
• Training will be provided for candidates without relevant experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70610 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

• Pre-plan and prepare detailed construction schedules, ensuring effective coordination of all project activities.
• Monitor and report on both on-site and off-site project management, ensuring adherence to schedules and milestones.
• Prepare and submit progress reports as required by consultants and clients, ensuring all stakeholders are updated on project status.
• Analyze and review project specifications, including civil/structural, architectural, and M&E drawings to ensure alignment with project requirements.
• Conduct regular monitoring of construction work activities, preparing daily, weekly, and monthly site reports.
• Collaborate with various teams and stakeholders to ensure smooth project execution and timely completion.
• Ensure compliance with all relevant construction methods, materials, and BCA (Building and Construction Authority) regulations.
• Perform site inspections and quality control to guarantee construction meets project specifications and standards.
• Manage site logistics, resource allocation, and troubleshooting of issues that may arise during construction.
• Daily sea travel to island work sites is mandatory.

Requirements:

• Relevant project experience in dredging, reclamation, or near-shore construction is preferred.
• In-depth understanding of marine construction processes, industry standards, and regulatory requirements, including contract law and legal principles.
• Strong knowledge of construction methods, materials, and BCA regulations.
• Excellent project management skills, with the ability to coordinate multiple tasks and stakeholders effectively.
• Strong communication and interpersonal skills.
• Ability to work under pressure and handle challenges efficiently.
• Ability to travel daily to island work sites.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Perform on-site service, maintenance, and repair of equipment.
• Ensure timely resolution of technical issues while maintaining high customer satisfaction.
• Participate in standby duties and provide support outside regular working hours as needed.
• Diagnose, troubleshoot, and implement solutions through self-learning and research.
• Accurately document service activities and maintain proper records.
• Collaborate effectively with peers and communicate professionally with customers.
• Ensure punctuality and commitment to completing assigned tasks.

Requirements:

• Comfortable working in a fast-paced environment.
• Willingness to take on standby duties as part of the job.
• Basic knowledge of Microsoft Office and computer skills.
• Demonstrated ability to self-learn and research technical information.
• Strong communication skills to interact with peers and customers.
• Highly punctual, reliable, and committed to delivering tasks on time.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Electrical Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday to Friday 8 AM – 5 PM)
• Salary Package: Basic Salary up to $4,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design, develop, and test electrical systems and components for various projects.
• Prepare and interpret electrical schematics, blueprints, and technical specifications.
• Collaborate with cross-functional teams, including project managers, mechanical engineers, and contractors, to ensure project goals are met.
• Perform calculations to ensure safe and efficient electrical system designs.
• Prepare and maintain documentation such as design specifications, project plans, and reports.
• Ensure all electrical engineering projects comply with relevant industry standards and regulations.
• Identify and resolve technical issues promptly to prevent project delays.
• Conduct regular inspections and testing of electrical systems to ensure optimal performance and safety.
• Participate in continuous improvement initiatives to enhance project efficiency and quality.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering or equivalent
• Minimum 1 year of working experience in an Electrical Engineering role

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68994 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781