Job Description & Requirements

a. Diploma in Mechanical or Electrical Engineering or equivalent from tertiary institutions subject to Authority’s Representative’s Approval;

b. Registered as Resident Technical Officer with BCA/IES/ACES;

c. Possess at least 5 years of relevant and practical experience on site

d. Shall be conversant with contract administration, statutory requirements for site supervisors, quality control procedures, and submission of progress reports.

e. Must be willing to do overtime or shift work if requested

f. Preferably Singapore citizen or SPR

g. Contract duration:16 month

Please include the following information in the resume

1. Reasons for leaving current and/or last employment

2. Last drawn and/or current salary in Singapore Dollar

3. Expected salary in Singapore Dollar

4. Date of availability and/or Notice Period

5. A current photograph

6. Latest RTO Cert

The Resident Technical Officer shall be directly responsible to the Consultant (Architect) / Project PM for the duration of the construction of the Works.

Shall assist in the supervision of the construction of the Structural Works under the Building Control Act and to render all assistance as may be required by the Consultant (Civil & Structural Engineer) and the Consultant (Mechanical & Electrical Engineer). For HDB Project Civil & Structural / Architectural Works:

Diploma in Civil Engineering or Structural Engineering or equivalent.

Registered RTO accredited by the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES).

Preferred applicants with Certificate in Building Construction Safety Supervisors Course.

Ensure that building contractor embrace good construction practise to achieve good workmanship.

Minimum 5 years relevant experience in supervision of building projects in Singapore.

Must have HDB/ BTO projects with commercial buildings supervision experience.

Availability to commence work on short notice.

Able to work night shift and rotational Sunday duties.

DSTA & CAG project experience is preferred.

Responsibilities:

• Assist in daily close supervision and coordination duties of structural works
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Keep quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors, Stakeholders, Authorities, Interfacing Contractors and the like on execution of works

Requirements:

• Diploma in Civil/Structural Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• 8 years of relevant experience in quality assurance inspections on C&S works for various building/infrastructure projects
• Contract duration is for up to 12 months

• Provide site supervision for assigned projects and execute as outlined by BCA regulations and report to project QP and Project Engineers.

• Work closely with contractors regarding work schedules, progress, quality, site safety, and quality control.

• Ensure that contractor activities align with drawings, specifications, approved methods, and schedules.

• Liaise with relevant authorities and local communities regarding on-site activities.

• Provide feedback and reports to the Consultant on project progress, highlighting safety, supervision, security, construction, maintenance, and improvement areas.

Job Summary:

We are seeking a highly skilled and experienced R2-IDEX Technical Consultant to join our team. As an Application Developer, you will play a critical role in designing, building, and configuring applications to meet business process and application requirements. You will act as a Subject Matter Expert (SME), collaborate with and manage teams, contribute to key decisions, and provide innovative solutions to complex challenges.

Key Responsibilities:

Application Development and Design: Design, build, and configure applications to align with business process and application requirements. Develop innovative solutions to enhance application functionality. Ensure applications are scalable, robust, and meet quality standards.

Team Collaboration and Leadership: Act as a Subject Matter Expert (SME) in SAP for Utilities InterCompany Data Exchange (R2-IDEX). Collaborate and manage cross-functional teams to gather, analyze, and implement requirements. Provide technical guidance to team members and perform code reviews. Make informed team decisions and provide solutions to challenges affecting multiple teams.

Configuration & Release Management: Maintain advanced proficiency in Configuration & Release Management. Ensure effective design and build enablement processes. Manage and streamline build management activities to meet project deadlines.

Troubleshooting and Support: Troubleshoot and resolve application defects and issues promptly. Identify root causes of application issues and implement long-term solutions.

Continuous Improvement: Stay updated with industry trends and best practices to enhance application development and delivery processes. Implement best practices for design, coding, and release management to continuously improve team performance.

Qualifications:

Master Proficiency:

SAP for Utilities InterCompany Data Exchange (R2-IDEX).

Advanced Proficiency:

Configuration & Release Management, Design & Build Enablement, Build Management.

Additional Skills:

• Strong analytical and problem-solving skills.
• Ability to lead and mentor team members.
• Excellent communication and interpersonal skills.
• Knowledge of industry best practices and trends.

Preferred Experience:

• Proven experience in application development and management using SAP for Utilities (R2-IDEX).
• Previous roles involving cross-functional team collaboration and leadership.
• Hands-on experience with configuration and release management in large-scale projects.

The Job:

• Planning, engineering, and executing maintenance of LPG Tanker and Chemical Tankers
• Monitor the performance of the vessel and crews to ensure compliance with safety regulations

Requirements:

• Ship Engineer of Class 1 COC or Class 2 COC with 2-3 years of sailing experience onboard an LPG / Chemical Vesesl.
• Working experience in a Shipyard and Ship Management Company will be an advantage
• Good knowledge of I.S.M code, Class, and Regulatory matters.
• Team player with a strong sense of responsibility, initiative, and willingness to travel

Please include the following when submitting your application via email to [email protected] :

• Detail resume with sea service record
• Earliest availability date
• Status in Singapore

We regret that only shortlisted candidates will be notified by Email

By applying for this role, you consent to ENEOS Ocean Shipmanagement Pte Ltd collecting and using your submitted personal information to process your application.

Job Description

We are looking for an experienced Technical Architect with expertise in OutSystems to design, implement, and maintain technical architecture for enterprise-grade applications. This role focuses on ensuring stability, scalability, and adherence to best practices, while collaborating closely with the Project Manager and Solution Architect to deliver robust solutions tailored to business needs.

Key Responsibilities:

1. Design and oversee OutSystems technical architecture, ensuring alignment with project goals and standards.
2. Implement OutSystems installations in on-premise and cloud environments for optimal performance.
3. Lead at least one platform version upgrade, ensuring smooth transitions with minimal disruption.
4. Collaborate with the Project Manager and Solution Architect to align technical and design decisions.
5. Mentor junior team members and foster a culture of knowledge sharing and best practices.
6. Translate business requirements into actionable technical specifications.

Requirements:

• Experience: 5+ years with OutSystems, focusing on technical architecture and system design.
• Skills: Proficiency in on-premise and cloud installations, OutSystems LifeTime, and platform upgrades.
• Preferred: OutSystems certifications and experience in enterprise-scale projects.
• Bonus: Knowledge of security, DevOps, and compliance standards.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Scope :-

• Track, Monitor, Control & Update Work Progress on Site
• Plan & Schedule for Site Inspections according to Work Progress Status
• Coordinate and Schedule draw 3D Drawings & Sample Submission for Approval to client
• Conduct Regular Internal Review meetings with Trade Contractors for Site Arrangement, Work Progress, & Technical Resolutions
• Perform Authorities submission including MOM, LTA, NEC, SCA, and any others deemed necessary for the site nature
• Support current direct sales activities
• Creation for new customer
• Support distributor’s sales activities
• Creation, maintenance and management of Social Networking Services content in each country
• Sales Tool Preparation (Clinical Data)
• Business planning
• Contract & negotiation with new Distributor
• Network building with the same industry
• Cultivate new customers
• Other ad-höc duties assigned

Job Requirements :

• Engineering or above on Electrical or Mechcaniacl flied or related discipline any bachelor degree
• At least 3-4 years of experience in A&A work and technical coodinator to lead the bussiness
• Strong leadership to monitor workers for the works executed
• Demonstrate ability to handle Work independently and efficiently
• Good interpersonal skills and be able to interface with all levels, internally and externally, in a responsive manner.

Responsibilities:

• Manage and oversee daily vessel operations, including vessel movements, document handling, and risk management.
• Ensure compliance with Port State regulations and maintain up-to-date knowledge of international maritime regulations and environmental standards.
• Handle and review ship and cargo documents, ensuring customs compliance for international shipments.
• Raise purchase requisitions and purchase orders for vessel maintenance and repair requests.
• Track and review approved purchase requisitions and manage procurement processes for all vessels.
• Collaborate with various stakeholders to ensure seamless operation and compliance with regulatory standards.
• Provide technical guidance and support in shipyard and offshore operations, as required.

Requirements:

• Proven experience in managing vessel operations and technical support.
• Strong understanding of international maritime regulations and environmental standards.
• Experience with ship and cargo document management, including customs compliance for international shipments.
• Ability to raise purchase requisitions and manage maintenance and repair procurements.
• Willingness to travel and work in challenging environments, including shipyards and offshore locations.
• Strong team player with the ability to work within time constraints.
• Excellent communication and interpersonal skills.
• Strong sense of integrity, professionalism, and commitment to safety.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description & Requirements

• Location : Mount Elizabeth hospital
• Working days: Mon to Sat 8:30 to 19:00

REQUIREMENTS:

• Minmum Diploma in civil/structural discipline or equivalent and shall be accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant exprience in projects similar in nature to the works
• Candidate with experience in medical and/or healthcare projects will be an advantage.
• Experience in large scale addition and alteration work at live building.
• Strong knowledge of Architectural details, working drawings and local construction practice.
• Basic knowledge of C&S and M&E drawings.
• Conversant with Singapore Statutes, Building Codes and Regulations.
• Experience in supervision of building construction, architectural and fitting out works.
• Good leadership skills, ability to manage and organise a large site staff team.
• Ability to use Autocad, Microsoft Project Programming and Management Software and related software.

Job Description & Requirements

• Review and interpret project plans, drawings, and specifications.
• Coordinate with project managers, engineers, and contractors to address and resolve technical issues.
• Conduct site inspections and prepare detailed reports on work progress, compliance, and any deviations from the plans.
• Ensure all construction activities comply with relevant environmental and safety regulations.
• Liaise with local authorities and stakeholders to obtain necessary permits and approvals.
• Maintain accurate and comprehensive records of all site activities, inspections, and incidents.

Requirements:

• Diploma/Degree in Civil Engineering or related field.
• Minimum of 5 years of experience in relevant field.
• Certified Resident Technical Officer (RTO) with accreditation from the Singapore Institute of Engineers (IES) or other relevant bodies

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Provide advice and resolve creatively any emerging problems/deficiencies
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Comply with guidelines and regulations including permits, safety etc and deliver technical files other technical documentation as required
• Other ad-hoc duties assigned

ARC Tier 1 is required to work in a secure ARC environment. ARC is a type of call center that specializes

in providing technical support or customer service for complex products or services. An ARC typically

employs highly trained and specialized agents who are knowledgeable about the product or service being

supported. They may also use advanced technologies such as artificial intelligence, chatbots, and

automation to assist with customer inquiries and support.

In addition to providing technical support, an ARC may also be responsible for proactive monitoring and

management of the product or service being supported, identifying, and resolving issues before they

become problems for customers. This can help to improve overall customer satisfaction and reduce

downtime for critical systems or services.

Overall, an Advanced Response Center plays a critical role in ensuring that customers receive high-quality

technical support and service for complex products and services.

ARC Tier 1 is responsible for provide first level technical support to customers. ARC Tier 1 will work

closely with ARC Tier 2, Team Leads & Technical Support Engineers to achieve this purpose. ARC Tier

1 is the first line of technical support. This team is responsible for basic customer

issues/enquiries/request/alert. It is the same as 1st Level support which provide basic technical or non-

technical support functions.

ACR Tier 1 functions and responsibilities (not limited)

12 hours shift mandataory

 Respond to the incoming enquiries/incident/request/alerts (Call, Email, Webchat, EUP, IVR

handling, Monitoring consoles)

o 1st level troubleshooting of in supported systems

i.e. Workplace; Server; Network; Microsoft 365; Secure Access Service Edge; Point of Sale

o Security event monitoring

o Server and network availability and performance monitoring

o Password reset and unlock

o Perform log & route [to higher tier or Resolver Team(s)]

 Record and manage all transactions/ cases in Service Management System

 Broadcast notifications to the relevant parties

 Provide timely status update, follow up on cases escalated until closure within the service level

agreement.

Ensure daily tasks are executed according to the Standard Operation Procedure

• To perform all roles and responsibilities required of site supervisors under the Building Control Act. Please refer to Annex A for more details on the list of responsibilities for RTOs.
• To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the Client, PM, SO, SOR and QP to ensure that works are constructed to required quality and accuracy.
• To monitor progress of the works on site and at any off-site manufacturing facilities and ensure that the site programme is in accordance with the approved construction programme. Any deviations from the construction schedule shall be reported immediately to the Client, PM, SO, SOR and QP. In the event of delays, the Resident Technical Officer shall assist the contractors to mitigate delays but without comprising on the quality.
• To ensure and maintain proper updated records of all works done, including records of tests, inspections, status of works, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities, etc and all other records as directed by Building Control Authorities.
• To study the contract documents and drawings and verify if there are any discrepanciesamong the drawings. All discrepancies shall be brought to the attention of the Employer concerned.
• To ensure that all installation methods and material used are in accordance with the contract drawings and specifications, and report to Client, PM, SO, SOR and QP on any materials that are not conforming to the specifications
• To liaise with the Main contractor and the Architect / M&E / C&S Engineer in the checking and approval of shop drawings, catalogues and samples.
• To liaise with the Main contractor in resolving site problems. All problems on site shall be referred immediately to the Client, PM, SO, SOR and QP. The Resident Technical Officer shall issue sketches or directions as and when necessary. All site memos shall be copied to the Employer.
• To ensure that the Main contractor comply with the Ministry of Manpower’s guidelines and recommendations for construction safety and the owner’s in-house safety management system.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings.
• To follow up and report to relevant Employer within three (3) days for site issues raised during the meetings.
• To manage the team of supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements and supervisors’ overtime claims.
• To ensure that all reinforcement, formwork, penetrations, etc. are finally checked prior to concreting. All concrete pours during office hours and all critical pours even after office hours shall be supervised by you personally (i.e. standing supervision).
• To record collate and file all incoming and outgoing design, shop, construction and coordination drawings. All old construction drawings shall be stamped ‘superseded’ and no checking shall be carried out on the superseded drawings.
• To generate defects list, supervise and monitor progress of rectification works and ensure that all defects are rectified as per Employer’s advice.
• To advise the Employer on the percentage of works completed for the purpose of verifying progress payment valuation, and to check contractor’s claims and variation orders.
• To ensure that the contractors record accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site. Also to check against the Employer’s drawings and identify and highlight the changes of variation orders so that Employer can direct the contractor to finalise the as-built drawings and to maintain a set of updated drawings on site.
• To check on quality of materials delivered to site and report to Client, PM, SO, SOR and QP of any materials that are not conforming to the specification. And to verify reports and claims submitted by contractors and to certify and sign on Delivery Orders
• To submit daily reports and updates to HDB based on an approved format. This will include and not limited to daily noise meter readings, daily safety and manpower reports.

Qualification

• Diploma in Civil/Structural Engineering or an equivalent certificate from a recognized institution/university or acceptable to the Commissioner of Building Control.
• Registered RTO (with BCA / IES / ACES) with Min. 5 years of RTO experience, institutional Project working experience preferred
• Good understanding in construction drawings and specification for Structural and / or Architectural works
  Familiar with Singapore Building Control Act and Construction Regulations.
• Good knowledge or experience in several aspects of construction activities
• Experienced in Coordinating Architectural / Structural works with project team
  

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

About the Role:

As a CBRE Contract Support Associate, you will provide exceptional customer service and administrative support to a large Business Unit, Facility, or Account. This job is part of the Contract Quality Management job function. They are responsible for managing the delivery of contractual services to ensure requirements are fulfilled.

What You’ll Do:

• Respond to client inquiries and concerns and ensure timely and quality service delivery and follow-up to ensure satisfaction.
  Understand the scope of the contract and make sure that all work is carried out accordingly.
  Be a financial and operational systems champion.
• Suggest efforts to put in place cost-saving opportunities to maximize customer and financial savings targets.
  Coordinate and onboard vendors for reactive and planned works and manage sub-contractor paperwork.
  Review processed invoices and ensure accurate cost center coding. Coordinate the billing application, calculating margins, raising invoices, and submitting to clients.
• Work closely with site teams and head office, ensuring accurate processing of quotations and purchase orders.
• Review and approve maintenance billing invoices and projects as per contracted agreements. Ensure consistent delivery of core operational and financial outputs on the account.
• Respond to inquiries on financial reports for Accounts Receivable, Payable, and open POs.
• Deliver monthly reporting support on Contract and Business Unit Reviews.
• Assist in ensuring compliance with Health & Safety requirements, including HSE reporting and promoting a safe work environment.
• Maintain QHSE documentation and ensure it is available using company systems.
• Gather and analyze data to identify and solve complex problems that arise with little or no precedent. May recommend new techniques.
• Impact own team and other teams whose work activities are closely related.
• Suggest improvements to existing processes and solutions to improve the efficiency of the team.
  
  What You’ll Need:
• High School Diploma or GED with 3-4 years of job-related experience.
• A comprehensive understanding of a range of processes, procedures, systems, and concepts within own job function is required.
• Ability to evaluate and communicate unusual and/or complex content in a concise and logical way.
• In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Organizational skills with an advanced inquisitive mindset.
• Advanced math skills. Ability to calculate advanced figures such as percentages, discounts, and markups.

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

We are seeking a highly skilled and motivated Projects Engineer - Industrial Automation to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design, development, and execution of industrial automation control systems, ensuring the successful delivery of high-quality projects and maintaining client satisfaction.

Key Responsibilities:

• PLC, SCADA, and HMI Systems Development: Program and develop automation systems using Siemens, Rockwell, Wonderware/AVEVA, and other relevant platforms.
• Control Panel & Electrical Architecture Design: Design and develop electrical systems and control panels to meet project requirements.
• Factory Acceptance Testing (FAT): Conduct Hardware and Software FAT to ensure the system meets specifications and requirements before delivery.
• Site Acceptance Testing (SAT): Perform testing and commissioning of automation systems at client locations to ensure they function as expected.
• Technical Support for Sales Team: Provide technical assistance to the Sales team during project bidding and tender processes.
• Onsite & Remote Support: Offer technical support for ongoing projects, both onsite and remotely, to address client needs and resolve any issues.
• Quality Control: Ensure that all project deliverables meet the required quality standards and specifications.
• Team Collaboration: Work closely with cross-functional teams, including project managers, engineers, and clients to ensure effective project implementation.
• Travel Requirements: Travel within Singapore and internationally (including offshore Oil & Gas facilities) for project implementation and meetings as necessary.We are seeking a highly skilled and motivated Projects Engineer - Industrial Automation to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design, development, and execution of industrial automation control systems, ensuring the successful delivery of high-quality projects and maintaining client satisfaction.

Requirements:

• Experience: 3-6 years of hands-on experience in industrial automation and digitalization.
• Automation Systems Expertise: Proficiency in programming and working with PLC, SCADA, HMI systems, preferably using Siemens, Rockwell, Wonderware/AVEVA platforms.
• Control Panel Design: Experience in designing and developing electrical architectures and control panels for industrial systems.
• Knowledge of Communication Protocols: Strong understanding of various communication protocols used in industrial automation (e.g., Modbus, Profibus, Ethernet/IP, OPC).
• Industry-Specific Knowledge: Familiarity with automation technologies specific to the Pharma, Oil & Gas industries is an advantage.
• Education: Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or a related field.
• Technical Support & Troubleshooting: Ability to provide both onsite and remote technical support and troubleshooting during the execution of automation projects.
• Communication Skills: Strong verbal and written communication skills for interacting with clients and team members.
• Team Player: Ability to work effectively in a team-oriented environment and collaborate with colleagues and clients both locally and internationally.
• Flexibility & Problem Solving: A flexible approach to work, with strong problem-solving abilities to overcome challenges during project implementation.
• Growth Mindset: A willingness to continuously learn and develop skills to grow within the company and the field of industrial automation.

Interested candidates are invited to send their CV/Resume to: [email protected]

We look forward to your application!

Our firm is currently looking for an experienced, accomplished, self-motivated Electrical Engineer to maintain and support our industry-leading products and systems. The Electrical Engineer will work across a variety of functional groups that are directly involved in engineering, product development, implementation, and international contract manufacturing partners. The ideal candidate is an inventive problem solver that is capable of working through technical challenges and employing pragmatic solutions. This is a fantastic opportunity to join a team that provides integrated services to meet our clients’ needs both locally and across the globe.

Job Descriptions

• Calibration, service and break-fix of instruments.
• Calibration, service of temperature or humidity chamber
• Follow and execute calibration work instructions
• Maintain and control ISO 17025 system of calibration laboratory.
• Any other duties as assigned by the company

Requirements

• Candidate must possess minimum NITEC certificate
• Higher NITEC or Diploma in Instrumentation / Engineering or equivalent is an advantage
• Experience in measuring instruments or calibration is an added advantage
• Proficiency in Microsoft Office (Excel) for capturing and processing measurement data
• Willingness to learn/upgrade and commit to meet assigned tasks in a timely manner
• Self-motivated and able to multitask
• Able to function as a team, and interact with colleagues and customers well
• Proper training will be provided for the expected job scopes
• Minimum 1 year experience in equipment measurement/calibration
• Candidate with prior experience in technical knowledge and experience in related field is welcome to apply
• Applicants must be willing to work in West
• Able to start work immediately or on short notice is preferred

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.