• Study and review M&E Drawings and coordinate M&E works with the consultants, sub-contractors as well as project structural & architectural colleagues team to resolve any technical, site issues and discrepancies.
• To carry out site supervision on M&E works and arrange inspection with RTO
• To supervise M&E subcon works and ensure subcontractors progress in accordance to schedule set
• Arrange all the M&E T&C works
• Ensure timely production and submission of M&E shop drawings, materials and method statement are to be approved before use
• Highlight and advise the project staff on the interfacing of M&E services and the ID works

Responsibilities

· Assist senior or principal engineer with solution development.

· Create Test case and work with business for User Acceptance Testing

· Participate in services and software system development and design.

· Work with IT to ensure Business As usual support for factory system.

· Work with capability acquisition team to ensure that future technology improvement aligns with Factory / Enterprise System requirement / expectation.

· Create reports and support business information requirement.

· Assist business during system roll out.

· Can drive the system and deal with routine error message.

Requirements

· Possess a Degree or Diploma in Engineering, IT or related fields

· Experience with Microsoft Power Platform development

· Experience with Microsoft Visual Studio Application development

· Excellent team player, self-motivated and self-driven to deliver result.

· Excellent analytical and problem-solving skills and project management skills

· Experience in leveraging 3rd party partners for support and/or projects.

· Knowledge on Networking and Server Architecture

· Experience with Object Oriented Design will be advantageous.

· Familiarity with Agile/Scrum methodologies

· Experience working in a high availability manufacturing services environment will be advantageous.

· Experience with Six Sigma, LEAN or other Continuous Improvement process will be advantageous.

· Fresh Grad are welcome

Job Description:

· Reports to Geotechnics Manager or Monitoring Manager;

• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Successful delivery of projects from difference service lines according to the quality plan and procedure;
• Assist the Project Manager in planning, coordination and execution of Soil Investigation and Instrumentation projects;
• Supervise and quality control on work delivery
• Attend meetings, write meeting minutes, method statement and liaise with project stakeholders, if required;
• Coordinate with contractors/sub-contractors on site;
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Perform field work as required within the specified budget and allocated time;
• Follow business management system and corporate compliance procedure;
• Act as role model for excellence, exceptionalism, quality, responsibility, professionalism and teamwork.
• Abide to Fugro’s Values.

Requirements:

· Degree in Engineering Geology or related discipline

· Min 2 years of working experience in operational control on soil investigation and instrumentation service line

· Experience in LTA, PUB project will be an advantage

· Fresh graduate will be considered for junior role

· Strong technical knowledge in soil investigation, instrumentation and monitoring service line

· Ability to think strategically and follow through on the successful implementation of plans

· Team player and strong problem-solving skills

· Effective communication skills including verbal and written communication

· Detail oriented and strong organisational skills

· Results driven and highly motivated

· Independent and able to deliver under pressured

· Accreditation Certificate for Geologist with GeoSS membership is a must

Responsibilities

• Manage the conceptualization, development, validation and implementation of new repair technologies
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling for implementing new repair processes
• Implement and deliver new repairs by designing and fabricating repair fixtures/ tooling; developing process parameters; and validating repair set-up through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Any other duties as assigned by supervisor

Requirements

• Bachelor’s Degree in Manufacturing, Material Science, Mechanical engineering or related field
• Good knowledge in component repair processes (welding, machining, painting, inspection etc)
• Possess good communication, analytical, engineering and project management skills
• Good technical problem solving skills (Six sigma), takes ownership and hands-on approach
• Familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Able to multi-task and work well under pressure as an individual/ team
• Ideally 3 years’ experience in a similar capacity in the aviation industry. Fresh graduates and experienced engineers from non-aviation industry are welcome to apply

Job Description:

• Responsible New Product Introduction (NPI) process reviews drawings and specifications.
• Submit Supplier Problem Sheet (SPS) for issues encounter drawing and specifications.
• Drafting 2D drawing for the entire incomplete drawing.
• Design the internal fixture all the process.
• Able to solve drawing issues with production team internally.
• Review Engineering Change Order (ECO) and Engineering Specs Waiver (ESW) process.
• Generate internal OMS (Operational Method Sheets) and WI (work instruction).
• Able to create PTIS (Part Technical Information Sheet) creation base on the drawings Generate internal.
• Able to read multi levels BOM.
• Create multilevel Bill of Materials (BOM) and Routing for job travellers.
• Provide assistance to Purchasing for any material or OEM buying parts related.
• Work with Customer for any design improvements.
• Hand on experience on assist assembly technicians.

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Knowledge of semiconductor and equipment assembly process.
• Familiar the semiconductors components process.
• Familiar the helium leak, hydrostatic leak test and load test.
• Time-management skills for meeting deadlines

Qualification:

• Diploma or degree with mechanical engineering
• At least 1 or 2 year semiconductor manufacturing experience or Precision Manufacturing

Job Responsibilities

• Perform and certify for routine checks and defects rectification on Boeing 787, 767 and 777 aircraft maintenance tasks.
• Inspect, troubleshoot and repair aircraft systems and/or engines.
• Solving issues related to quality and safety.
• Maintain a high level standard of airworthiness when performing inspections and maintenance.
• Inspect finished work, operation/functional tests and aircraft defect rectification.
• Sign-off all tasks performed and comply with Airworthy Release.
• Co-ordinate maintenance service with relevant maintenance service provider, where necessary.
• Report to headquarter in Tokyo on regular basis to update on maintenance process and issues.
• Manage and maintain tools & equipment store.
• Support and perform maintenance engineer duties in overseas stations, where necessary.

Requirements

• Degree in Electrical and Electronic Engineering or related professional field in aircraft maintenance from an accredited university.
• Possess aircraft maintenance license and an expert with excellent aircraft engineering and maintenance knowledge for Boeing 787, 767 and 777.
• Possess more than 25 years of airline engineering experiences in the aviation industry.
• Possess qualified certification from Japan Civil Aviation Bureau (JCAB) is highly recommended as part of civil aviation regulations requirement.
• Proficiency in Microsoft office such as Word and Excel for reporting and communication with Head office in Tokyo.
• Proficiency in English as well as Japanese for communication including writing, reading, listening and speaking so as to make coordination with Head office in Tokyo.
• Strong ability to work under pressure due to time sensitive maintenance situation.
• Pleasant personality with good interpersonal and communication skills.
• Pro-active and self-motivated individual who works well independently.

Staff Fringe Benefits includes:

• AWS & Variable Bonus.
• Medical and Hospitalisation coverage
• Concessionary travel to any destinations & discounted travel on ANA and other partner airlines

Job Description:

• Responsible New Product Introduction (NPI) process reviews drawings and specifications.
• Submit Supplier Problem Sheet (SPS) for issues encounter drawing and specifications.
• Drafting 2D drawing for the entire incomplete drawing.
• Design the internal fixture all the process.
• Able to solve drawing issues with production team internally.
• Review Engineering Change Order (ECO) and Engineering Specs Waiver (ESW) process.
• Generate internal OMS (Operational Method Sheets) and WI (work instruction).
• Able to create PTIS (Part Technical Information Sheet) creation base on the drawings Generate internal.
• Able to read multi levels BOM.
• Create multilevel Bill of Materials (BOM) and Routing for job travellers.
• Provide assistance to Purchasing for any material or OEM buying parts related.
• Work with Customer for any design improvements.
• Hand on experience on assist assembly technicians.

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Knowledge of semiconductor and equipment assembly process.
• Familiar the semiconductors components process.
• Familiar the helium leak, hydrostatic leak test and load test.
• Time-management skills for meeting deadlines

Qualification:

• Diploma or degree with mechanical engineering
• At least 1 or 2 year semiconductor manufacturing experience or Precision Manufacturing

• Degree in electrical or mechanical engineering recognised by Singapor PE Board or its equivalent.
• Minimum 5 years of experience in TBM operation, repaire and maintenance.
• Ensure smooth operation of TBM.
• Coordinate with TBM manufacturer for technical issues and spare part requirements.
• Familiar with LTA MRT projects specifications and requirements.
• Applicants are required to submit their detailed CV ans state the current and expected salary.

Main Responsibilities:

* To perform all roles and responsibilities required of site supervisors under the Building Control Act.

* Ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations.

* Monitor and report on the progress of works.

* Carry out inspection of M&E engineering works prior to concreting, subsequent construction work and defects rectification works.

* To carry out supervision and inspection of the works as directed by the Supervision QP, CRE, SRE, consultants or Superintending Officer.

* To manage and supervise the Resident Technical Officer under his charge.

* Ensure records of all mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety are timely updated and properly kept.

* Attending site, progress, variation, and coordination meetings.

* Verifying all reports and claims relating to M&E works submitted by the contractors.

* Liaise with all relevant authorities and stakeholders to maintain proper and updated daily records of all works done including records of tests, inspections, status of work, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc.

* Keeping accurate record of variations as instructed or approved by the Superintending Officer and to maintain a set of updated drawings on site.

* Check all drawings including shop drawings, construction drawings and specifications for discrepancies and to report to the Supervision QP, consultants or Superintending Officer.

Qualifications:

* Degree/ Diploma in mechanical or electrical engineering degree recognised by the Professional Engineers Board of Singapore.

* Minimum five (5) years of relevant experience as a mechanical and electrical engineer, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and &ol systems.

* Preferably with experience in the supervision of infra services laying, lighting &control systems.

At CAPE, we put talent, hard work, teamwork, and a fun workplace together to learn and grow, approach problems, and solve them creatively and collaboratively.

Join us to be part of the team!

Responsibilities

• Perform structural analysis and design works for building works and civil works.
• Supervise the drafting works related to design and coordinate for deliverables.
• Ensure all engineering works comply with relevant statutory standards, regulations, and Codes of Practice.
• Assist QP/Project Lead in managing projects, liaise with stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants and submission to authorities.
• Working independently in analyses, design, submissions, construction support and coordination works will be advantageous.

Requirements

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore/Malaysia.
• Minimum 2 years of C&S design experience.
• With working experiences in Singapore/ Malaysia on structural engineering projects.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. Tekla, STAAD Pro, SAFE, Prokon, Etabs, SAP 2000 etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

This position is a 3-year contract with the possibility of renewal.

We regret that only shortlisted candidates will be notified. By applying or sending your resume to us, you are consenting to the collection, use and disclosure of the submitted personally identifiable data. We collect and use personal data (including name, address, telephone number and email address) submitted by you for a variety of reasons, including for evaluating job applications, processing information requests, and internal record-keeping of our communications with you. Further information on our Personal Data Protection Policy can be found at www.cai.sg.

Job Description

• Mechanical Design of Jigs & Fixtures and machine parts;
• Perform reverse engineering drawing'
• Involved all activities include designing, sourcing, installation, assembly and troubleshooting;
• Communicate with customers for design input;
• Coordinate with production floor for design related issues;
• Coordinate with sales, production and suppliers;
• Technical support on-site;
• Supporting QC inspection and assembly.

Requirement

• Degree / Diploma in Mechanical Engineering / Automation / Mechatronics or equivalent;
• Proficient in CAD software, preferably in AutoCad & SolidWorks, able to generate parts in 3D models/assemblies;
• Innovative, pro-active, energetic, can work under minimum supervision.
• Hands on experiences

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture

Requirements

• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

• Perform qualification validation of medical device sterilization related equipment and processes
• Perform the release of sterilization batches in accordance to relevant ISO standards
• Ensure the compliance of equipment in accordance to Calibration and Preventive Maintenance requirements.
• Perform complaint handling, investigate root cause of complaint, and perform Corrective Action and Preventive Action as necessary.
• Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.
• Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures
• Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing
• Participate in external and internal audit to ensure company quality system is effective
• Participate in continuous improvement programs such as 6S program, yield improvement projects etc.
• Support new production introduction as a team member representing quality
• Perform other tasks as assigned by the supervisor

Education

• Bachelors Degree in Engineering, Science (e.g. Microbiology) or equivalent

Experience

• Work experience as a sterilization engineer in a medical device manufacturing environment
• Experience with qualification validation of equipment and processes for sterilization of medical device
• Working knowledge of ISO11135 EtO Sterilization for Medical Devices and/or any other relevant standards such as ISO11137 Gamma Sterilization
• ISO13485 Internal auditor

Skills

• Statistical Analysis (Hypothesis Testing, ANOVA, Gage R&R, DOE etc)
• Root cause analysis (Kepner-Tregoe, 5-Why, 6M etc)
• Problem solving techniques (e.g. DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and Office software application

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Key Responsibilities

1. Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.
2. Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test
3. Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed
4. Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)
5. Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required
6. Collect process and qualification data to create product Best Known Methods (BKMs)
7. Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping
8. Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.