• Marine Electronics & Telecommunication
• Basic $3000 - $3500
• 5 days (8.30am – 5.30pm)
• Location: Pandan Loop

Responsibilities

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements

• Min Diploma/ Degree in Engineering or other relevant
• No experience are also welcome

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 2 - 5 years' experience working in construction industry

Responsibilities

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP
  Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Requirement

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 2 years of high-speed CPU/GPU/DSP Subsystem RTL Integration experience or IP/Block/SoC Design experience (Candidate with less than 5 years of relevant experience will be considered for junior position)
• Experience with Synopsys ICC (preferred) or Cadence tools from netlists to GDS
• Experience in graphics processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Knowledge of high-speed/low power IP and custom circuit design
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Job responsibilities:

• Report to the Head of System Engineering at basis level and to the Lead/Senior Technical Safety Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Adhere to Company contractual requirements, Scope Boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Be responsible for the management of resources and progress of the Safety Engineering scopes and for internal and external deliverables in line with the project budget and schedule.
• Be responsible for the technical integrity of all Safety Engineering design activities and deliverables under his/ her supervision through the project lifecycle and for the compliance with relevant project performance, integrity, quality and HSE requirements.
• Review and provide technical inputs on Technical Safety related technical matters to interfacing disciplines, in coordination with the Lead Technical Safety Engineer, during the development of design on projects.
• Manage Technical Safety interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Act as the package responsible engineer for safety, life-saving and firefighting equipment.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Be responsible for the progress of assigned Technical Safety scopes, the internal and external deliverables in line with project budget and schedule.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Technical Safety discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Technical Safety at the fabrication site, whenever required.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Technical Safety Discipline development and experience transfer.
• Perform any other duties as assigned by his/ her supervisor.

Work experience requirements:

• Must have a minimum of 10 years of experience having worked in an engineering setup for upstream oil & gas projects (Fixed and Floating installations) having served in the capacity of a Safety Engineer, having accrued thereof a minimum experience of 5 years in the capacity of a Senior Safety Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Must have significant experience with implementing Safety Design Philosophies and Specifications related to Escape and Emergency Response, Active and Passive Fire Protection, Fire and Gas detection, Design Accidental Loads, Emergency Shutdown and Human Factor Engineering.
• Must have had significant experience with developing Safety Engineering Deliverables related to Escape Route Layouts, Firewater Calculations and P & IDs, Fire and Gas Drawings, Hazardous Area, Noise Specification and Flare Radiation.
• Must have had significant exposure to supporting the development and implementation of recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, Evacuation Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.
• Must have a good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation), NORSOK, EU Directives and other relevant standards related to Technical Safety.
• Must have strong computer literacy in commonly used business software applications such MS Office and shall be familiar in the use of the latest versions of Technical Safety related software such as Pipenet, DNV PHAST, Flaresim etc.

Qualifications:

• Bachelor’s degree in Mechanical/ Chemical/ Safety Engineering or other equivalent engineering specialisation.

Other skills:

• Excellent technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Strong interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.

​​​​​​​We regret that only shortlisted candidates will be notified.

Job Description

Validate the TC&IS Development, Configuration, Validation and Management Plan application. Day-to-day, you’ll work closely with teams across the business (systems), achieve the specified software quality requirements detailed in System Engineering and TCMS Software Quality Plan and informs the team members of their associated responsibilities and much more.

• Specifically take care of managing the development of all Train Control & Information Systems (TC&IS) deliverables (sub-system, electrical and software work products) for a Project from offer, specification, design ,validation to end of warranty period, but also ensuring the quality on all domain of his/her project (Schematic, Apparatus, Software…).
  
  Your Responsibilities and Challenges
  
  Managing the design planning and the achievement of the Design/Verification reviews in all step of the Design.
• Delivering all TC&IS Engineering outputs including, Train Control and Monitoring System Requirements and Architecture, Software specification or Functional Design Description, Software, Electrical Schemes and Electrical Products definition (with the support of Electrical Lead Engineer), in compliance with the Engineering Quality, Cost and Delay commitments.
• Managing interface and ensure follow up of sub-systems (electrical components, PAPIS (Public Address and Passengers Information Systems), CCTV, Multimedia, TCMS, Event recorder, Train Ground Communication, ATC(Automatic Train Control)/Safety equipment).
• Ensuring standardization and maximize the carry over with previous project.
• Supporting Industrial and Manufacturing areas during First Train Assembly.
• Supporting Commissioning and Validation area during First Train tests.
• Ensuring that the cybersecurity requirements are properly managed on each project/program and follow-up the main open actions for "at risk" or challenging projects/programs.
• Functional management of the Train Control & IS resources of his/her project.
• Formulating a design solution that fulfils the specified customer requirements by defining the architecture and performances of the TC&IS subsystems and functional studies he/she is responsible for, maximizing the re-use of service-proven design patterns.
• Monitoring, control and consolidate the TC & IS work package (Work Package Review, Risk mitigation, Quality Cost & Delay project target) and ensure the reporting activities to the Project Engineering Manager of the project (PrEM).
• Defining the applicable TCMS configuration (low voltage scheme, apparatus, and software version) with the Train System Engineer, Train Design Engineer, Project Engineering Manager and its team.
• Contributing to the return of experiences on his/her domain (Software, Schematic, Apparatus).
• Contributing for technical specificities and expertise to advice the Project Team and/or Customer.
• Supporting the other stakeholders (design, sourcing, validation etc..) in the understanding of the Cybersecurity processes and actions in particular with regards to the interfaces in between the teams.
• Being the responsible at Project level for the transverse Cybersecurity actions and for topics addressed at: Project (progress plan), Region, Métier Manager level.

Qualifications

• Rolling stock functional engineer experiences on several train functions, >5 yrs.
• Work package and Team management experiences.
• Hands-on electrical and schematic design activity.
• Hands-on experience in design & development of model based control systems using application tools like DCUTerm, Control Build, Matlab / Simulink, Matrix or similar tools.
• Knowledge of network topologies and interfaces for Serial, Ethernet, MVB and other industrial communication network.
• Communication abilities.
• Innovation

• Initiate and Lead cloud Capacity projects as a Lead engineer.
• Manage capacity and sizing requirements for strategic business initiatives translating business requirements into technical terms and support defining processes roadmaps and vision.
• Process development for streamlining capacity reclaim to achieve highest optimization with minimum risks.
• Monitor capacity/product performance and provide recommendations
• Planning for Cloud Hosting infrastructure.
• Involve in storage and backup operation.
• Negotiate and manage external vendor contracts.

Requirements:

• Degree in Information Technology or any related fields.
• 4+ years of experience in Project Management,Capacity management,server and storage management.
• Professional Certification like PMP,ITIL or any related are preferred.

You will lead a cross-functional team to develop a B2B e-commerce cybersecurity platform with SaaS functionality based on existing in-house solutions.

Responsibilities:

• Familiarize with Ensign’s business domain of cybersecurity and existing in-house tools.
• Guide the outsourced team in the development of a B2B e-commerce platform
• Lead the development of SaaS-flow for existing in-house cybersecurity solutions, to enable them to be accessed via the B2B e-commerce platform.
• Be familiar with both front-end and back-end dev and UIUX design to guide a small development team working on the above project.
• Familiarity with cybersecurity domain is preferred.
• Evaluate potential solutions relating to analytics web applications and make recommendations to solve business problems
• Deploy to and administer cloud-based web application platforms
• Monitor and respond to production issues
• Ability to design and supervise QA / testing for code

Requirements:

• BS/MS in computer science from a reputable university (preferred, or sufficient certifications to demonstrate technical knowledge)
• Minimum 5 - 8 years of experience working on web applications, preferably with SaaS development experience
• Deep knowledge in Javascript as a full-stack dev.
• Preferably some experience working with e-commerce platforms.
• Experience with cloud-native development and deployment
• A creative thinker who understands User Interface design
• Strong awareness of data security, data governance and performance, with an ability to deliver these key non-functional requirements
• Excellent technical skills

Responsibilities :

• Responsible for the design and development of analog building blocks, including amplifiers, integrators, switched capacitor circuits, regulators, bandgap circuits, Delta-Sigma ADCs, SAR ADCs, filters and control logics etc.
• Responsible for top-level integration of high performance mixed signal chips including analog front end signal acquisition and conditioning chips and analog front end battery monitor chips etc.
• Work with digital team to define register maps, control logics, digital filters for analog front end chips or mixed signal SOCs etc.
• Conduct periodic design reviews.
• Support test development and product development teams in bringing projects to production.

Requirements:

• Degree/Master/PHD in Electrical Engineering or Microelectronics with excellent technical background in analog /Mixed-Signal design.
• With interest in IC design welcomed.
• With experience in analog IC design preferred.
• Salary will be offered base on working experience

Responsibilities:

• Responsible for physical design and development activities of MediaTek’s Ghz ARM/Imagination-based graphics processors, AI processors and neural network DS.
• Involve in activities encompass physical design and analysis of complex and timing-critical graphics processor AI processors and neural network DSP.
• Technical disciplines include Physical Implementation (floor-planning, place and route, RC extraction, timing and power optimization) & signoff (DRC, LVS, STA, PI).

Requirement:

At least 4 years of experience in Physical Design and Signoff

[Skills]

>> Synthesis::

PPA improvement through synthesis recipe exploration for better perf, power, and area.

>> Physical design ::

Floor Planning, Place & Route followed by Timing and Physical Closure

>> Signoff ::

PI : PG mesh spec selection, Bump/RDL planning, IR closure

PV : DRC, LVS, ANT, ERC closure

STA : Block level timing closure

Job Description:

As a Lead Electrical Engineer for FPSO (Floating Production, Storage, and Offloading), you will be responsible for providing technical leadership and expertise in the design, installation, and maintenance of electrical systems onboard FPSO vessels. You will lead a team of electrical engineers and technicians, ensuring the safe and reliable operation of electrical equipment and systems in compliance with industry standards and regulatory requirements. Your role will involve overseeing electrical design, integration, commissioning, and troubleshooting activities to support FPSO operations and project execution.

Key Responsibilities:

1. Lead and manage a team of electrical engineers and technicians involved in the design, installation, and maintenance of electrical systems onboard FPSO vessels.
2. Plan, coordinate, and oversee electrical engineering activities throughout the project lifecycle, including conceptual design, detailed engineering, construction, and commissioning phases.
3. Develop electrical specifications, drawings, and technical documents in accordance with project requirements, class society rules, and regulatory standards (e.g., ABS, DNVGL).
4. Review and approve electrical design deliverables, including single-line diagrams, schematics, equipment layouts, cable schedules, and equipment specifications.
5. Collaborate with other engineering disciplines, project managers, and vendors to ensure the successful integration of electrical systems with overall FPSO design and project objectives.
6. Conduct technical reviews, risk assessments, and feasibility studies for electrical engineering projects, identifying opportunities for optimization and improvement.
7. Ensure compliance with applicable regulatory requirements, industry standards, and best practices for electrical safety, performance, and reliability.
8. Provide technical support and guidance during procurement activities, including specification of electrical equipment and materials, vendor evaluation, and bid review.
9. Lead commissioning, testing, and troubleshooting activities for electrical systems and equipment onboard FPSO vessels, ensuring adherence to project specifications and quality standards.
10. Monitor and analyze electrical system performance, reliability, and efficiency, identifying opportunities for optimization, maintenance, and upgrades to support FPSO operations.

Requirements:

1. Bachelor's degree in Electrical Engineering or related field. A Master's degree or professional certification (e.g., PE license) is preferred.
2. Proven experience (8+ years) in electrical engineering, with a focus on marine and offshore projects, particularly FPSO vessels.
3. Strong technical knowledge and expertise in electrical engineering principles, practices, and standards, including marine electrical systems, power distribution, and hazardous area classification.
4. Familiarity with class society rules (e.g., ABS, DNVGL), regulatory requirements (e.g., IMO, SOLAS), and industry standards applicable to FPSO electrical systems.
5. Proficiency in electrical design software and tools, such as AutoCAD, ETAP, EPLAN, or equivalent programs, for schematic design, calculations, and analysis.
6. Experience leading and managing multidisciplinary engineering teams, with demonstrated leadership abilities and effective communication skills.
7. In-depth understanding of electrical safety practices, hazard analysis, and risk assessment methodologies applicable to marine and offshore environments.
8. Ability to work effectively in a dynamic and challenging offshore environment, with a strong commitment to safety, quality, and environmental protection.
9. Excellent problem-solving skills, attention to detail, and ability to manage multiple priorities and deadlines effectively.
10. Strong interpersonal skills, with the ability to collaborate effectively with diverse teams, clients, contractors, and regulatory authorities.

Responsibilities:

• Responsible for physical design and development activities of MediaTek’s Ghz ARM/Imagination-based graphics processors, AI processors and neural network DS.
• Involve in activities encompass physical design and analysis of complex and timing-critical graphics processor AI processors and neural network DSP.
• Technical disciplines include Physical Implementation (floor-planning, place and route, RC extraction, timing and power optimization) & signoff (DRC, LVS, STA, PI).

Requirement:

At least 4 years of experience in Physical Design and Signoff

[Skills]

>> Synthesis:

PPA improvement through synthesis recipe exploration for better perf, power, and area.

>> Physical design :

Floor Planning, Place & Route followed by Timing and Physical Closure

>> Signoff :

PI : PG mesh spec selection, Bump/RDL planning, IR closure

PV : DRC, LVS, ANT, ERC closure

STA : Block level timing closure

Job Description

• Responsible for ensuring all aspects of the studios are in order, including studio set, equipment to ensure a smooth production of the News & Current Affairs programmes for CNA and all news bulletins transmission on Mediacorp channels.
• Assist Automation Directors on all responsibilities for the execution of daily news bulletins and current affairs programmes for both automated and traditional galleries.
• Liaise with Producers, Automation Directors and Graphic Designers to meet technical and operational requirements during live transmission and ensure that editorial intentions are met, with the highest production standards maintained.
• The incumbent will also be equipped with the right skills required for new and developing tools to deliver high quality production.

Qualifications

• Minimum a Nitec/ Higher Nitec in Video Production/ Diploma in Electronic/Electrical/Audio Engineering or its equivalent
• Detail-oriented and be able to multi-task.
• Effective communicator and a good team player.
• Good organizational and project management skills are necessary.
• Shift work required to accommodate the production requirements. Must be willing to work nights, on irregular shift including weekends and public holidays.

Responsibilities :

• Layout for analog and mixed signal circuits from sub-blocks to top-level integration.
• Review, analyze floor plans and complex circuits with circuit designer.
• Run a complete set of design verifications.
• Collaborate with the circuit design teams to constantly optimize layout implementation for better power, performance and area, as well as planning on work schedule.
• Understand CMOS matching layout techniques for precision analog circuits.
• Understand arrayed and pitched layout styles for Amplifiers/ ADCs/ DACs/ Decoders/ Power Device.
• Understand basic Layout issues (i.e., floor planning, bussing, pin location, etc.) and latch up/ESD requirements.
• Strong debug and problem-solving skills for LVS, DRC and layout issues.

Requirements:

• Bachelor Degree in related engineering disciplines or equivalent.
• Entry level are welcome to apply as training will be provided
• Experienced candidates with relevant skills and expertise are most welcome.
• Salary package will be offered based on working experience

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Overall Job Purpose

Under direction of Section Lead as a lead assigned engineer (LAE), to develop, manage, and coordinate engineering proposal activities and deliverables preparation including engineering manhour estimation, engineering schedule, and material take-off along with the engineering disciplines.

To engage and manage all necessary interface issues with other departments including fabrication, installation, commissioning, and proposal team as a representative of engineering department.

Responsibilities

• To develop winning strategy and tactics jointly with Proposal Manager, to lead and manage engineering proposal activities, and to prepare deliverables in cooperation with Engineering Section Leads
• To deal with regulatory issues affecting engineering proposal works including engineering quality, cost and/or risk and to ensure that engineering deliverables always comply with regulatory requirements and MODEC’s policies
• To check and clarify allocation of the necessary resources on proposal work in coordination with Section Leads and to ensure that resources assignment to the project is well planned.
• To coordinate with Engineering Section Leads to confirm readiness of engineering tools and software, enabling engineers to meet the expectations of the Project.
• For improvement of the productivity and competitiveness, to lead the review and improvement of work systems and processes by introduction of new technology/methods, raising professional standards, and acquiring better equipment.
• To review, update, and enhance engineering proposal practices, ensuring that appropriate follow-up actions are taken
• To prepare and finalize the Engineering Execution Budget under direction of Director of Engineering Department, Proposal Section Lead.
• To develop engineering database relating with proposal and/or engineering execution
• To document lessons learnt from previous proposal and/or projects and to implement in the work

Requirements

• Minimum Bachelor or Master of Engineering
• Project Management Professional (PMP) preferred
• Minimum 15 years of relevant working experience in Oil and Gas or FPSO sector
• Preferred engineering manager and/or project manager experience.

The Lead Salesforce Architect role will be responsible for building and mentorship of a multi-skilled Salesforce team as well as design and implementing Salesforce solutions for our customers that follow best practices in both IT and Salesforce projects.

Responsibilities

• Manage robust teams of Salesforce.com delivery team members, including BAs, Tech Leads, Architects, Developers & QA
• Perform project and program management activities, including project financials.
• Liaise and manage collaboration between horizontals to bring in synergies and ensure successful delivery
• Take accountability of delivery of work packages to customer facing project teams, ensuring packages are delivered on time and with quality
• Ensure for all projects, each Apex method developed has an equivalent test method with at least one valid unit test (using an assertion)
• Ensure total test coverage within QA and higher environments is at least 85%
• Ensure all code is peer-reviewed against Cognizant development standards prior to deployment to QA
• Maintain and publish Salesforce development standards to broader technical teams on a quarterly basis
• Ensure developers are incorporating code review feedback prior to deployment to QA. Enforce the practice with regular training & project audits.
• Ensure version control has been correctly setup at the beginning of the project
• Ensure all developers are using version control as the source of truth for development
• Be an active part of the COE, owing technical & solution reviews for all projects on a regular basis
• Reporting to internal senior management or Leadership teams on the overall engagement (across different dimensions like delivery, bid management, staffing, financials etc.
• Ability to understand pain areas of business and present workable solutions
• Acts as the escalation point when issues arise and understand what to do and who to work with to resolve them.
• Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities on a daily basis.
• Work closely with business analysts, architects, developers, testers and a variety of IT and business stakeholders.
• Keeping up to date with Salesforce releases and new functionality.
• Adhere to company and project standards and guidelines.
• Accurate time management and reporting of own work.
• Quality, on time delivery of agreed deliverables.
• Ability to work on multiple applications/ projects/ BAU enhancement simultaneously and must have a “can do” attitude.
• Grow the maturity of our practice by leading internal initiatives to further develop methodology, tooling, and skillsets. This includes owning our Architect & CTA Academy, enable CICD & version control for all projects
• Define & enable development plan for TL’s to make them into strong TA’s
• Help drive bootcamp for developers and enforce best practices in all our developers

Requirements

• Extensive years of strong experience in handling large delivery engagements with managing SFDC programs
• Deep knowledge and expertise across the Salesforce.com platform (Sales Cloud, Service Cloud, etc.), including experience delivering complex SFDC solutions
• Has delivered multiple full end-to-end Salesforce.com implementations/projects, especially including highly integrated/complex ecosystems. Understands how to deliver capabilities on Salesforce AppExchange products
• Strong program management and problem-solving skills
• Should have excellent presentation and written communications skills
• Strong Exposure to SDLC and Agile methodologies
• Exceptionally strong in scope management
• Has ownership for key projects’ timelines, deliverables, budget and metrics
• Proven ability to efficiently manage a portfolio and drive operational improvements
• Should be flexible in time and attitude
• Works independently to manage the whole program and respective stakeholders/ and projects
• Hands on experience with setting up branching strategy, version control & CICD

Qualifications

• Platform Developer I (mandatory)
• Platform Developer II (desirable)
• Salesforce Application Architect (mandatory)
• Salesforce System Architect (desirable)
• Integration Architecture certified (desirable)
• TOGAF Certified (desirable)
• Project Management or Delivery focused certification (mandatory)

Job Description:

· Deliver unified communications & network project.

· Responsible for unified communication & network design, development, implementation, testing and preparing completion document. Primary handle Cisco Network & Unified Collaboration Solutions.

· Gather the technical requirement, develop low level design, implementation and user acceptance plan to customer.

· Work with vendors and suppliers/principals to deliver the projects.

· Project Management role such as prepare work breakdown structure (WBS), issue management list, meeting minutes and etc.

Job Requirements:

· Min 10 yrs of IT experience in Network & Unified Communication solutions.

· Clear understanding of Cisco Voice network deployment models and should understand functioning of voice network devices.

· Clear understanding on VOIP protocols like SIP, H.323 and MGCP.

· Clear understanding on Telecom infrastructure protocols like SIP, ISDN and analogue trunks.

· Knowledge and experience on Cisco routing & Switching Products and networking.

· Strong business acumen with strong interests in keeping up-to-date with current technologies.

· Good verbal and written communication and presentation, negotiation skills.

· Good analytical and problem-solving skills.

· CCIE Collaboration holder prefered. (Minimun CCNP)

· Diploma / Degree holder

Skills you should have: IT Service Management Troubleshooting Security Development Cloud Computing Cisco Technologies Sales Management User Acceptance Network Design Solution Selling Product Management Enterprise Software Networking New Business Development Telecommunications Unified Communications IT Management Management

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for an experienced Project Manager to lead a team effectively while managing stakeholders and direct the execution of the projects to ensure goals are achieved. The Project Manager will be responsible for executing solar PV projects while maintaining budget and schedule. The role requires the individual to work closely with the Business Development team, providing recommendations on how to maintain value and protect profitability.

Roles and Responsibilities

• Prepare, check, and confirm technical drawings, project schedule, balance of system, manpower and workload forecast, budgets and cashflow projection, and any other necessary project related requirements
• Communicate with customers, suppliers, subcontractors, and inter-department stakeholders to facilitate a coordinated project execution
• Supervise the construction of the project with high attention to technical execution quality, safety, time and budget, complying with contractual agreements, quality control, and customer expectations
• Ensure all authority submissions required are prepared and submitted to execute the projects
• Propose and implement corrective measures to problems / difficulties found while project execution and share such learning experiences with the rest of the team to build departmental experience
• Preparation of the necessary materials to handover the project and close it properly
• Perform Testing & Commissioning activities to verify project safety and quality
• Prepare reporting with various level of detail to communicate the progress and status of the project to different internal stakeholders within the company.
• Give feedback of products’ defects and non-quality issues for future corrections and procurement

Requirements:

• Professional degree in Engineering field relevant for Solar PV projects (M.Sc. or B.Sc.)
• Industry experience of minimum 5 years working for Engineering, EPC contractors and/or Utility/Electrical companies
• Proven track record in Project Management, Project Engineering, HSSE, Procurement
• Good technical understanding about solar PV
• Ability to prepare a variety of documentation / reporting to serve different purposes
• Goal-oriented, driven, and resilient, able to work in teams, quick learner
• Able to multitask and work under pressure
• Excellent organisational skills, detail-oriented, with good interpersonal skills for interdepartmental coordination
• Fluent in English, spoken and written

While skills and experience are important, we place equal importance on a candidate’s resourcefulness, adaptiveness and the ability to prioritise and find solutions appropriate for a situation.

About Us

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

Responsibilities

• Involved in company wide design and UX process from concept to outcome, high-level discussions to fine details
• Assisting in digital transformation, improving UX and frontend development standards and shaping up the companys agile culture
• Collaborate closely with different teams, stakeholders and vendors to streamline workflow, and facilitate and execute high quality experiences for multiple exciting projects
• Creating UI pattern framework that Application Developers can re-use in the future using HTML/CSS/JavaScript
• Ensure consistency of the user interface across multiple platforms and to conduct quality assurance checks of elegant frontend code, including HTML, CSS and JavaScript

Qualifications

• Bachelors Degree in Computer Science/related fields or equivalent with total development experience of at least 5 years
• Expert in JavaScript, REST, HTML, CSS, and MVC frameworks; experience in working with Less/Sass
• Familiar and hands-on experience with AngularJS, ReactJS, Vue.js, or other frontend frameworks
• Experience in working on applications powered by Drupal CMS (traditional fully coupled; headless fully decoupled with a presentation layer running on NodeJS + VueJS; hybrid progressively decoupled)
• Experience in PatternLab design and implementation, especially Twig-based pattern library and prior experience working with Agile methodologies, such as Scrum, Kanban, and familiar with GIT
• Possess good understanding of web UI design principles and an ability to squarely discuss UI issues with UX designers for optimal solutions
• Participating large scale of projects involving vendors and candidates with prior experience in news and publishing domain will be a plus

This role is to design, develop and optimize AI platform for enterprises applications. It focuses more on the system-level techniques, such as efficiency, scalability and cost. The responsibilities may include but are not limited to:

• Employing software and hardware co-optimization to improve efficiency and reduce costs of AI applications, such as heterogeneous computing (GPU), memory and storage systems, RMDA, operating system and database kernel optimization
• R&D on system-level frameworks and techniques for machine learning applications, such as our open-source project OpenMLDB, GPU virtualization, computing frameworks employing AI chips, and so on
• Exploring and engaging in innovative work, utilizing cutting-edge technologies to enhance product performance and efficiency.

Requirements:

• Proficiency in at least one object-oriented programming language (such as C++/Java/Python) and experience participating in large-scale projects.
• Solid understanding of computing fundamentals, including data structures, algorithms, operating systems, databases and so on. Familiarity with parallel computing and distributed computing concepts.
• Interest in low-level system technologies and building large-scale products, with a focus on solving system-level technical challenges (such as improving performance and scalability, heterogeneous computing, OS kernel development, etc.)

Preferred skills/experience:

• Any relevant development experience in areas such as heterogeneous computing (GPU), database, OS kernel development, storage systems, distributed computing, Spark, or other big data computing frameworks.
• Achievements in internationally renowned computing competitions, such as ICPC.
• Publication at top-tier conferences in the systems field, such as OSDI, SOSP, HPCA, EuroSys, SC, SIGMOD, VLDB, etc.
• Significant contributions to influential open-source projects (please provide portfolio of relevant contributions).

As a Software Engineer, you will be responsible of delivering multi-platform middleware to customers, enabling the usage of Thales’ PKI applications for PC end-users. The Middleware bridges the cryptographic services required by the user applications (mailbox, browser) and the user’s smartcard, providing strong security with state-of-the-art cryptographic algorithm support. You will participate in the design, implementation, validation, and deployment of various desktop applications (core and UI) managing and manipulating digital security devices connected to the workstation.

Responsibilities:

• Analyze requirements, perform feasibility study, provides technical proposal of the solution and subsequently convert them into design specifications.
• Perform software design and implement the design subsequently with good code quality.
• Implement unit test over the source code and perform black box testing over the developed application.
• Perform application and system integration with continuous integration, maintain and ensure the integrity of the integration, follow up integration and build failures, and track and fix bugs.
• Implement state-of-the-art cryptographic protocols and security counter-measures
• Sustain in-house and third party tools.
• Protect the company’s IP and propose patents.
• Contribute to continuous product and development methodology improvement.
• Work within a project team with an Agile approach to software development.

Requirements:

• Degree in Software Engineering / Informatics Engineering / Computer Science, or related fields
• At least 3 to 5 years middleware development experience with software engineering process is desirable
• Proficient in C/C++/Java programming languages with debugging experience (Visual Studio, gdb, kernel)
• Well-versed and proficient in object oriented concept and able to apply relevant object oriented programming techniques properly
• Proficient in data structures and algorithm, able to use proper data structures and algorithm in solving various problem domains
• Knowledge of multiple Microsoft OS platforms (W10, W11), and non-Windows environment (MAC OS or Linux OpenSuse, Fedora, Ubuntu, Debian), in particular for device management
• Experience as a tech lead or software coaching is an advantage
• Following knowledge is a plus: smartcard, cryptographic (PKCS#11), VMware / VirtualBox, iOS or Android mobile application development, Certified Scrum Master
• Autonomous and rigorous with good communication and collaborative skills
• (Optional) Knowledge of UI/UX framework (Chromium Embedded Framework) or testing tools (RCPTT)

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Key responsibilities

• Provide operational and maintenance support for Satellite Broadcast Service.
• Knowledge of Satellite Transmission (i.e. Solid State Power Amplifier (SSPA)/BUC, Satellite modulator, Integrated Receiver Decoders (IRDs) or Satellite Headend (i.e. Video Encoder, Multiplexer)
• Perform equipment/system configurations, Video switching, IP routing and monitoring of Radio Frequency (RF) & Video signals for Broadcast production and operation.
• Perform Satellite uplink and downlink configurations.
• Perform RF equipment/system preventive and corrective maintenance
• Perform Broadcast equipment/system preventive and corrective maintenance
• Perform IP broadcast network configurations and maintenance.
• Resolve technical issues and to provide periodic/planned preventive & corrective maintenance.

• 4 years of experience required in relevant industries.
• Degree in Electronics/Computer Engineering or any related discipline.
• Knowledge in network and video transport technologies.
• Knowledge in audio, video and broadcasting system.
• Able to work independently, as well as in a team.
• Willingness to take on new challenges.

The Lead Salesforce Architect role will be responsible for building and mentorship of a multi-skilled Salesforce team as well as design and implementing Salesforce solutions for our customers that follow best practices in both IT and Salesforce projects.

Responsibilities

• Manage robust teams of Salesforce.com delivery team members, including BAs, Tech Leads, Architects, Developers & QA
• Perform project and program management activities, including project financials.
• Liaise and manage collaboration between horizontals to bring in synergies and ensure successful delivery
• Take accountability of delivery of work packages to customer facing project teams, ensuring packages are delivered on time and with quality
• Ensure for all projects, each Apex method developed has an equivalent test method with at least one valid unit test (using an assertion)
• Ensure total test coverage within QA and higher environments is at least 85%
• Ensure all code is peer-reviewed against Cognizant development standards prior to deployment to QA
• Maintain and publish Salesforce development standards to broader technical teams on a quarterly basis
• Ensure developers are incorporating code review feedback prior to deployment to QA. Enforce the practice with regular training & project audits.
• Ensure version control has been correctly setup at the beginning of the project
• Ensure all developers are using version control as the source of truth for development
• Be an active part of the COE, owing technical & solution reviews for all projects on a regular basis
• Reporting to internal senior management or Leadership teams on the overall engagement (across different dimensions like delivery, bid management, staffing, financials etc.
• Ability to understand pain areas of business and present workable solutions
• Acts as the escalation point when issues arise and understand what to do and who to work with to resolve them.
• Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities on a daily basis.
• Work closely with business analysts, architects, developers, testers and a variety of IT and business stakeholders.
• Keeping up to date with Salesforce releases and new functionality.
• Adhere to company and project standards and guidelines.
• Accurate time management and reporting of own work.
• Quality, on time delivery of agreed deliverables.
• Ability to work on multiple applications/ projects/ BAU enhancement simultaneously and must have a “can do” attitude.
• Grow the maturity of our practice by leading internal initiatives to further develop methodology, tooling, and skillsets. This includes owning our Architect & CTA Academy, enable CICD & version control for all projects
• Define & enable development plan for TL’s to make them into strong TA’s
• Help drive bootcamp for developers and enforce best practices in all our developers

Requirements

• Extensive years of strong experience in handling large delivery engagements with managing SFDC programs
• Deep knowledge and expertise across the Salesforce.com platform (Sales Cloud, Service Cloud, etc.), including experience delivering complex SFDC solutions
• Has delivered multiple full end-to-end Salesforce.com implementations/projects, especially including highly integrated/complex ecosystems. Understands how to deliver capabilities on Salesforce AppExchange products
• Strong program management and problem-solving skills
• Should have excellent presentation and written communications skills
• Strong Exposure to SDLC and Agile methodologies
• Exceptionally strong in scope management
• Has ownership for key projects’ timelines, deliverables, budget and metrics
• Proven ability to efficiently manage a portfolio and drive operational improvements
• Should be flexible in time and attitude
• Works independently to manage the whole program and respective stakeholders/ and projects
• Hands on experience with setting up branching strategy, version control & CICD

Qualifications

• Platform Developer I (mandatory)
• Platform Developer II (desirable)
• Salesforce Application Architect (mandatory)
• Salesforce System Architect (desirable)
• Integration Architecture certified (desirable)
• TOGAF Certified (desirable)
• Project Management or Delivery focused certification (mandatory)

Eigen Energy is a green tech start-up for solar energy and electric vehicle charging infrastructure.

We are looking for an experienced Project Engineer to lead a team effectively while managing stakeholders and direct the execution of the projects to ensure goals are achieved.

The Project Engineer will be responsible for executing EV Charging Infrastructure projects while maintaining budget and schedule. The role requires the individual to work closely with the Business Development team, providing recommendations on how to maintain value and protect profitability.

Roles and Responsibilities

• Prepare, check, and confirm technical drawings, project schedule, balance of system, manpower and workload forecast, budgets and cashflow projection, and any other necessary project related requirements
• Communicate with customers, suppliers, subcontractors, and inter-department stakeholders to facilitate a coordinated project execution
• Supervise the construction of the project with high attention to technical execution quality, safety, time and budget, complying with contractual agreements, quality control, and customer expectations
• Ensure all authority submissions required are prepared and submitted to execute the projects
• Propose and implement corrective measures to problems / difficulties found while project execution and share such learning experiences with the rest of the team to build departmental experience
• Preparation of the necessary materials to handover the project and close it properly
• Perform Testing & Commissioning activities to verify project safety and quality
• Prepare reporting with various level of detail to communicate the progress and status of the project to different internal stakeholders within the company.
• Give feedback of products’ defects and non-quality issues for future corrections and procurement

Requirements:

• Diploma or Degree in Electrical Engineering
• Industry experience of 1-2 years working for Engineering, EPC contractors and/or Utility/Electrical companies
• Strong ability to run multiple, small projects concurrently and successfully.
• Knowledge of building codes and experience handling low voltage electrical system installation and technical support
• Goal-oriented, driven, and resilient, able to work in teams, quick learner
• Excellent organisational skills, detail-oriented, with good interpersonal skills for interdepartmental coordination

While skills and experience are important, we place equal importance on a candidate’s resourcefulness, adaptiveness and the ability to prioritise and find solutions appropriate for a situation.