Duties & Responsibilities

• Coordinate with Engineering, Construction, Procurement and Project groups to review the scope of work in terms of deliverables to be submitted to the client, to finalize schedules to be met, and utilize resources required as percontract.
• Perform schedule monitoring and updating of project schedule, preparation of periodic Progress Reports with commitments & forecasts. Propose corrective actions and follow-up.
• Prepare various Weekly/Monthly Progress Reports.
• Analyse Subcontractor’s progress report, identify and highlight schedule deviations and delay.

Education Qualifications and other Requirements

• Degree with extensive Project Control experience on major projects working in a contractor environment is preferable.
• Excellence in Microsoft Excel, Microsoft Project and Primavera version 6 (and above) application is a must.
• Minimum 6 to 7 years planning & scheduling in EPC sector is a must.
• Familiar with standard software programs, developing S-Curve Schedule, bar-charts and manpower histogram is a must.

Skill Requirements

• Demonstrated success in past project involvement and technical delivery of medium to large size projects.
• Possesses wide and diversified knowledge of project control system, scheduling and planning techniques in the Oil & Gas and Petrochemical Industry, in particular EPC.
• Quality & Safety Awareness / Accountability.
• Organisational Alignment.
• Technical Skill & Work Performance.
• Teamwork (Cooperation and Coordination).
• Effective Communication.
• Integrity and Trust.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Basic salary: ($3,200 - $4,500)

Location: Serangoon

Mon - Fri, 8.30am to 6pm

Job Description

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA would be highly advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore. Be accountable for individual sales target to be determined by the Company.

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor etc.

• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.

• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.

• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.

• Track and report sales activities; submit weekly and monthly report promptly.

• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.

• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.

• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.

• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.

• Working closely with customers to find application possibilities and propose suitable technical solutions.

• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.

• Conduct product and application training.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Role Overview

• To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Job Responsibilities:

· Over-all project management, which includes planning and implementation of assigned projects.

· Site feasibility & Solar Systems Design and complete execution.

· Complete system designs for PV projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of BOS location and interconnection details, and labelling.

· Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports.

· Coordination with clients & consultants to ensure smooth communication.

· Provide support to technical design, review and approve engineering drawing submissions.

· Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports.

· Provide technical support during installation, testing and commissioning.

· Attending site meetings for smooth coordination

Requirements:

· Minimum Degree in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering degree.

· Minimum 2 year of experience in engineering field

· Computer knowledge in Auto CAD.

· Ability to plan & monitor project progress to ensure timely completion

· Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

· Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

· Good work ethics and team player

· Knowledge in Solar system design and electrical engineering fields

· Knowledge in PV Solar and software of PVsyst

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

7. Adhere to shift duty roster

Key Skills:

1. Technical knowledge (civil/construction)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works (tunnels, excavation, foundation)

3. Diploma in Civil/Structural/Geotechnical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

Key Responsibilities:

1. Supervise complex construction works

2. Ensure quality control and compliance

3. Maintain site records and progress reports

4. Resolve site issues with good team spirit

5. Work shifts as required

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

Work Arrangement:

- Night shifts

- Sundays

- Public Holidays

- Assigned shift duty roster

Key Skills:

1. Technical knowledge (construction,mechanical/electrical)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works

3. Diploma in Mechanical/Electrical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.