• To Check all drawings, specifications and schedule of works as per the contract document and reporting the discrepancies to consultant and contractor in order to avoid progress delay.
• Full-time site supervision and inspections to ensure that all structural works are carried out as per approved specification and also as per drawings with approved material in an appropriate sequence and methods.
• Inspect and monitor quality of architectural finishing materials delivered to site and quality of workmanship.
• Carry out supervision and co-ordination of architectural works of the project and shall exercise all reasonable skill, care and diligence in discharge of the contract.
• Assist RE in supervision and inspecting all structural works.
• Assist CPM in site progress and update proper site records about the progress of work and documentation.
• Attend site meetings and site walks with clients and consultants.
• Ensure timely submission of shop drawings, method of statement, other technical submissions, material samples and trade demonstration by the contractors.
• Assist and co-ordinate with consultants to resolve any technical and interfacing issues.
• Familiar in consultant Quality Management System and make proper documentation for QMS audit to comply HDB audit.
• Liaise with contractor on work schedule, progress, work quality and quality control etc.,
• Witness and verify any field test carried out on site.
• Monitoring Site Instrumentation report (Settlement marker, Vibration report, Noise meter).
• Update Monthly progress report and daily site activities report.
• Enforce quality control, Safety management, Vector control and tidiness of the work site.
• Update monthly Consultant Safety and Vector report.

Contract Period:

• 16 January 2025 TO 15 January 2026

Deployment:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 30 minutes lunch break
• Fridays: 9:00am to 5:30pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays except by special arrangement with off-in-lieu provision
• Service not required on gazetted public holidays

Scope of Works:

Technical Support Officer Art:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal
2. To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)
3. To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.
4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters
5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.
6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)
7. To assist in photo-documentation of students at work for purposes of T&L review
8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)
2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking
3. To supervise students at work on occasions when teaching staff is not around.
4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.
5. To assist in setting up for lessons in terms of instruments / computer / electronic set up
6. To assist in setting up of video cameras for practical examinations

Requirement:

• Good communication and interpersonal skills
• Good team player with a high level of initiative and independence.
• Proficient in MS Office and Excel
• Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students.

Job Responsibilities:

• Over-all project management, which includes planning and implementation of assigned projects

• Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports

• Coordination with clients & consultants to ensure smooth communication

• Directly reports to the Project Manager

• Preparation of samples according to the requirements of the project

• Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports

• Coordination of deliveries on site

• Issuance delivery orders

• Attending site meetings for smooth coordination

Requirements:

• Minimum Diploma in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering diploma.

• Minimum 1 year of experience in engineering field

• Computer knowledge in Auto CAD will be added advantage.

• Ability to plan & monitor project progress to ensure timely completion

• Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

• Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

• Good work ethics and team player

• Knowledge in lighting technology and lighting design or electrical engineering fields

• Able to start work immediately

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Assist in Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Assistants in monitoring projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Other ad hoc projects assigned

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 1-2 years relevant experience (open to entry level)
• Proficient in MS Office, AutoCAD, and BIM
• A team player and with a positive working attitude

JOB SCOPE & JOB RESPONSIBILITIES

• Drive the creation and refinement of piping layouts, material take-offs (MTOs), and 3D model evaluations for intricate piping systems.
• Analyse stress and vibration data, offering technical expertise and recommendations.
• Collaborate closely with multidisciplinary teams to ensure cohesive project progress.
• Oversee technical specifications, support standards, and material selection to meet project requirement.
• Conduct regular progress assessments and provide strategic recommendations for project requirements.
• Offer technical guidance during contruction and installation phases to ensure successful project outcomes.
• Mentor and guide junior engineers, promoting a culture of quality and efficiency in design.
• Any other duties as assigned by superior.

JOB REQUIREMENT

• Bachelor Degree in Mechanical Engineering or a related field (or equivalent experience).
• At least 10 Years of experience in piping design, stress evaluation, and construction engineering support, including 5 Years in a supervisory capacity.
• Proficient in AutoCAD and 3D modelling tools (eg., Navisworks etc)
• Strong technical knowledge of piping stress/vibration analysia, material selection, and system design.

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

As a XS Developer, you’ll be working closely with our development team to implement and optimize code for our project (mainly xs syscalls). We’re looking for someone with a solid understanding of Age of Empires 2 mechanics and XS scripting, who is also comfortable with general scripting tasks to support a variety of development processes. In return, you will be part of a creative and supportive team environment with the ability to have a direct impact on the development of top-tier games.

Are you up for the challenge?

Some of the cool stuff you'll be doing:

· Develop and maintain code in C/C++

· Working with automation tools and customized scripting languages (.xs) in a proprietary engine

· Utilize Age of Empires 2 knowledge, including mechanics and XS scripting, to enhance project outcomes

· Collaborate with the team to deliver optimized and high-quality code

Requirements

· 1+ year of experience in C/C++ with a passion for game dev

· Strong understanding of Age of Empires 2 game mechanics and avid fan

· Fluency in English

· Strong general scripting skills and automation knowledge

· You will be asked to partake in a technical test to prove your skills.

· Plus: Any modding experience with AOE2

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

Main Responsibilities / Critical tasks

• Responsible to assist in the design of controls system and programming coding to meet the budget and time expectations as defined by Project Manager
• Able to Modify controls design and other documents according to the Mikron Processes & Standards and compliance to industry standards as according to customer URS.
• Develop specific program per customer and project requirements based on Mikron Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly

Skills and knowledge requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent; or at least 5 years related experience and/or training; or equivalent combination of education and experience.
• Minimum 3 years of related work experience.
• Must be able to travel as requested
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Knowledge in Allen Bradley and Siemens-S7 programming.
• Computer skills including intermediate to advanced Microsoft Office Tools (Outlook, Word, PowerPoint) and Excel spreadsheet experience; Microsoft Project; Design software; Internet software; Manufacturing software and SQL/Dbase Database software.

Hardware Engineer

Responsibilities:

• Develop of real time embedded systems
• Able to execute development project independently throughout the development implementation and manufacturing process
• Perform debugging, testing and improvement of current products
• Provide in-house/on-site technical support, documentation and technical training

Requirement:

• Degree in Embedded system/Electronics/Electric or equivalent
• Experience in Electronic hardware design inclding circuit analysis, IO interface to microprocessor and component selection for the performance enhancement on current and new product
• Experience in PCB schematics and artwork layout is highly preferred
• Experience in C and Assembly language programming

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both

mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and

applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job

Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Responsibilities

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects

Requirements

• Diploma or Degree in Electrical Engineering, Control Systems Engineering or related fields
• 2-5 years of experience in project management, automation, and control systems, preferably in industries such as water treatment, oil & gas, manufacturing, or infrastructure
• Strong knowledge of SCADA, DCS PLC programming
• Familiar with communication protocols like Modbus, DNP3, and OPC
• Hands-on experience with field commissioning, testing, and troubleshooting
• Strong project management skills, including plannings, scheduling, budgeting and resource management
• Excellent communication and interpersonal skills to manage client relationship and work in a team-oriented environment
• Professional Certificate holders in PMP or Certified Automation Professional is a plus

Job Purpose:

The Sales Engineer is responsible for driving the revenue growth of his / her portfolio within the SEA region for both the advanced materials (coating services) and the industrial equipment business units.

Responsibilities:

• Participate in the formulation and drive execution of the sales and marketing strategy within the SEA region (Singapore, Malaysia, Thailand, Indonesia, Vietnam, Philippine, Indonesia) to deliver sales revenue growth within the 3 years business plan.
• Actively collaborate in collaborative market research into regional markets to identify clear target customers with defined market segments and application groups defined in the strategy.
• Lead and drive strategic sales initiatives for the SEA region, collaborating with the required internal resources to identify and acquire qualified leads and ultimately create new opportunities. These initiatives will include sales campaigns (personal selling, LinkedIn, etc), exhibitions, seminars etc.
• Lead and cultivate strong customer relationships with all key customers and key business opportunities. Engage and develop key stakeholders on the customer side and devise clear plans to drive opportunities through the sales process to win business.
• Opportunity Management: manage all opportunities with a clear roadmap through the sales process, managing where necessary projects with clear objectives, goals, milestones, and timelines to win customer business.
• CRM: Work professionally within the CRM tools / framework to ensure best practices in customer relationship management.
• Solutions & Product knowledge: continuously develop a deep understanding of the markets, applications, solutions, and product portfolio of Nanofilm and its target customers.
• Business responsibility to define with management the most relevant business model / offering to our customers, to balance the strategy of Nanofilm and to meet customer needs to win business.
• Negotiation skills to navigate customer negotiations on all business and contractual topics such as NDA, Sales Contracts, Negotiation commercial terms, etc.
• Reporting, providing regular reports on status, progress, and planning for the S&M activities in the region. Including forecasting, monthly updates, etc.

Requirements:

• Bachelor's in engineering Discipline
• 3- 5 years minimum experience in B2B Materials Technology and related industries
• Aggressive in meeting sales targets and results- driven.
• Confident, independent, target-driven, and goal-oriented with a proactive approach to generating and converting prospects into actual sales.
• Excellent communication skills and competitive sales approach
• High degree of commercial acumen matched with a strong customer-focused approach.
• Knowledge of International business practice and regulation has an added advantage.
• Ability to assimilate and understand technical information regarding vacuum coating technologies and sell on technical capabilities.
• Strong analytical skills to evaluate market opportunities and benchmark competitors technically and commercially.
• The initial work location will be at 28 Ayer Rajah Crescent. The company is scheduled to relocate to the HQ office at 11 Tai Seng Drive in 2025.

Roles & Responsibilities

Job Description & Requirements

Be involved in the planning of civil engineering works.

To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

Any ad-hoc duties as assigned by the Manager.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

The Senior Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

As an Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• > 2 years of experience in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals in the semiconductor industry
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations

Keen on the role? Apply now!

Job Description

The job involves the supervision of MRT projects Cross Island Line

Job Requirements

RE shall have minimum 4 years of relevant experience as a civil engineer, of which minimum 2 years in supervision of deep excavation/basement works..

- Registered as RE Cert accredited by the Institute of Engineers Singapore (IES)/Association of Consulting Engineers Singapore (ACES).

- MRT experience will be an advantage.

Responsibilities

Project Planning and Coordination:

Collaborate with the project management team to develop project plans, timelines, and budgets for HVAC projects.

Ensure compliance with project specifications, codes, and industry standards.

Coordinate and schedule project activities, subcontractors, and resources effectively.

Design Review and Analysis:

Review HVAC system design drawings and specifications to identify potential issues or improvements.

Perform engineering calculations and simulations to optimize system performance.

Provide input and technical guidance during the design phase.

Material Procurement and Vendor Management:

Assist in the procurement of HVAC materials and equipment.

Evaluate and select vendors and suppliers based on cost, quality, and reliability.

Maintain strong vendor relationships and ensure timely deliveries.

Quality Control and Inspection:

Implement quality control processes to ensure HVAC systems meet project requirements.

Conduct regular site inspections to verify workmanship and compliance.

Identify and address any deviations from project standards.

Documentation and Reporting:

Maintain accurate project documentation, including drawings, change orders, and progress reports.

Prepare and submit regular project status reports to the project management team.

Document and address any project-related issues or disputes.

Safety and Compliance:

Ensure that all HVAC installations comply with safety regulations and industry standards.

Promote a culture of safety among project team members and subcontractors.

Conduct safety audits and address any safety concerns promptly.

Client Communication:

Act as a primary point of contact for clients regarding HVAC project updates and inquiries.

Address client concerns and seek opportunities for additional services.

Budget and Cost Control:

Monitor project budgets and expenditures to ensure they align with project plans.

Identify cost-saving opportunities and implement cost control measures.

Qualifications

• Bachelor's degree in Mechanical Engineering or related field.
• 1-2 years of experience in HVAC engineering and project management.
• Strong knowledge of HVAC systems, design principles, and industry best practices.
• Proficiency in AutoCAD, HVAC design software, and project management tools.
• Excellent communication, leadership, and teamwork skills.

5.5 days /week

Mon - Fri : 0830 to 1730 hrs

Sat : 0830 to 1230 hrs

We are looking for a senior technical leaders in the field of process engineering to join PDE, Advance Packaging Process Module Team.

As a Senior Member of Technical Staff (SMTS), you will play a pivotal role in driving innovation, leading technical projects, defining the technical roadmap, and mentoring fellow engineers. Your expertise will be instrumental in developing cutting-edge Advance Packaging process solutions to support yield ramp-up. Your contribution will leave a lasting impact on the Advance Packaging industry.

Responsibilities for Process Engineering SMTS include (but not limited to):

• Own critical taskforce, take ownership of critical initiatives, and leading multi-functional technical team to implement new tech node yield roadmap. Collaborate closely with process integration, technology development, and local yield teams to improve new technology.
• Guide and mentor team members, fostering a culture of continuous learning and career development.
• Cultivate an innovative attitude, finding opportunities for process improvements that align with state-of-the-art product requirement while optimizing costs.
• Develop a fundamental understanding of process engineering and its impact on overall process health.
• Provide engineering support to internal team members and senior leadership.

Requirements:

• Technical expertise: Detailed knowledge of at least one of the main semiconductor processes, including lithography, dry etch, wet etch, CMP, thin film, diffusion, implantation, and metrology, with at least 10 years of relevant experience in advanced memory or logic node. Strong understanding of process integration
• Project leadership: Proven skills in leading complex technical projects, ensuring timely delivery of high-quality results. Ability to drive multi-functional technical teams and successfully complete of complex projects.
• Communication skills: Outstanding written and verbal communication skills. Demonstrated interpersonal skills, including influencing and motivating. Ability to collaborate effectively with multi-functional, multi-cultural teams.
• Innovation: Track record of providing innovative solutions
• Education: An advanced degree in Engineering or Science is preferred.

Keen on the role? Apply now!

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

The resources will have the below qualifications:

• Required skills include 3+ years of experience in the implementation, maintenance and analysis of data center facilities, hardware, communications infrastructure, strategies, tools and effective troubleshooting techniques.
• Basic background on enterprise data center facilities and infrastructure environments such as PDUs, RPPs, network and SAN infrastructures. In depth knowledge on complex, Enterprise class inter-networked environments involving a combination of switched/routed/shared Ethernet, TwinAx (100GigE, 25GigE,10GigE, GigE, 100M, and 10M), token ring, SAN, and wide area connectivity.
• Strong knowledge of WAN technologies (OC-x, DS-x), subnetting and TCP/IP protocol a must.
• Knowledge of trouble ticketing systems, change control, Project processes and associated tools.
• Logical problem- solving techniques and associated experience in system, data center facilities, and telecommunications.
• Experience with project management.
• Financial Services industry knowledge a plus.

Interested candidates, please send over your resume to [email protected]