Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

JOB SUMMARY

Under general direction, the Technical Sales Manager is responsible for managing the technical sales aspects including segment, product line & technology packages, and all relevant technical supporting activities throughout the entire sales process. Successful activities include: collaborating within the sales organization on new customer opportunities, building strong customer relationships, technology training, collecting & analyzing customer/market insights to identify winning technology solutions, and supporting strategic sales growth initiatives. This is a key role within our organization advising and guiding the technical aspects of the sales process while working within a close collaboration with Global Technical Sales Managers (TSMs) to ensure alignment and leverage global insights and strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Build credible & strong relationships by focusing on:

• Advocating, coaching, and training for the segment, product line, and/or specific technology.
• Supporting sales growth opportunities, and proposal development, in a team selling approach with sales managers and sales support operations.
• Actively supporting sales activities: customer technology needs assessment, alignment with engineering standards, technology decision, product sizing, and strategic account planning.
• Face to face interactions with customers and identified markets we serve.
• Developing multiple relationships & communication pathways within a customer
• organization focused on Engineering and Plant Operations.
• Support conference strategies including technical presentations and booth support.
• Maintaining up-to-date understanding of industry trends and technical developments.
• Identifying opportunities & advise on available technology or service solutions.
• Clearly articulate Crown’s technology offerings and advantages.
• Obtaining and coordinating data and recommendations to Sales and Sales

• Segment and Product Line development:

• Collaborate with Global Segment Commercial Leads, Engineering, & other Technical Sales Product Managers to develop cohesive standard global product offerings.
• Develop & Manage standard product line sales tool-kits including sizing programs, sales flow diagrams, mass balances, and a library of sales presentations.
• Assist marketing collateral development on product lines and new innovations.
• Support technology discussions to close the deal in an efficient and professional manner.
• Deliver against sales goals by supporting Sales, Sales Support, & Aftermarket team members.
• Cross functional & global collaboration. Key technical tag for Aftermarket commercial support connecting inquiries into Sales & Engineering as needed.
• Deep understanding of technology/service value and total cost of ownership, TCO.
• Support new innovation launches with technical support & training.
• Contribute to all customer field reports after each customer visits.

• Develop testing protocols for customer piloting work as required.

• Perform other related duties as required and assigned.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in chemical, or mechanical engineering.

• Master’s degree preferred.

• 5+ years Engineering or Operations experience within the Oilseeds complex, preferably in an Oilseeds Crushing or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleochemical business.

• Demonstrated sales support experience.

• Strong Competitive desire to succeed & win.

• High integrity and ethics.

• Entrepreneurial spirit.

• Excellent written and verbal communication skills.

• Effective at problem solving and conflict resolution.

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Strong attention to detail.

• Technology advocate into customer focus.

• Establish and maintain effective working relationships with co-workers, customers, and vendors.

• Responsive to requests and inquiries from internal and external customers.

• Well-developed presentation skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, TEAMS and PowerPoint, SharePoint.

• Must be able to communicate in English fluently. Ability to communicate in a second language – European or Asian languages preferred but not required.

• Customer relationship management (CRM) experience a plus.

• Process Modeling experience – ChemCad, Aspen modeling a plus.

• Ability to travel internationally and domestically up to 25% of the time.

Job Responsibilities

• Sales and marketing of valves (Own and well known brand in the industry)Able to secure & generate sales of valves & Actuators to achieve company order targets
• Aggressive PIC for Sales Division who can develop new business(sales) from scratch & be able to conclude orders.
• Establish relationship with End Users, Contractor (Industrial Market, main Market is semiconductor, & petrochemical related) who use valves, gathering market information and expand sales
• Market survey of new business field and reporting
• Work closely and liaise with related divisions such as Sales Team, Warehouse, Engineering, Factories, Japan head office
• Properly understand the needs from customers and follow upongoing project
• Person in charge to communicate with customers if a claim occurs, and liaise with related divisions to solve the problem
• A highly dedicated, responsible & passionate person who can perform task accurately & promptly, and able to work under pressure by taking challenge.
• Ad-hoc duties by MD or GM.

Requirements

• Minimum 2 years’ experience related valves, actuators & similar industry in sales including planning sales approach
• Proactive attitude to analyze the current situation and change to better way
• Depending on the performance, this position could be the future Senior Manager
• Proactive attitude to hit the target and logical way of thinking, and to develop new business and sales channel
• Confident in communication
• General Skill in Excel, Word and Power Point
• Team Player
• Ownership
• Decisive, drive and ability to deliver effective, innovative solutions
• A person who has positive and can think and act for himself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication andinterpersonal skills at all levels
• Some understanding of Japanese is a plus.

Reporting Function

• Directly report to Sales General Manager

Roles & Responsibilities

Job Description

• Industry/ Organization Type: Marine Shipbuilding and repairs
• Position Title: Mechanical Engineer
• Working Location: Jurong West
• Working Hours: 6 days (Monday to Friday (8 AM - 6 PM) Sat 9am -1230pm
• Salary Package: Basic Salary up to $8,500 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment repairs, hands-on assembly, testing, troubleshooting, and supporting projects related to Scrubber systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the marine/mechanical industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at) [email protected] Kindly indicate #me on the email subject.

Zantra Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job description

• Proactively engaging with customers on service sales and technical inquiries to support the sales team in meeting sales growth objectives and nurturing positive client relationships.
• Provides technical support during site installation, troubleshooting and testing & commissioning.
• Deliver in-house (phone/email) and on-site service support, as well as conduct demonstrations for potential customers.
• Provides technical support throughout site installation, troubleshooting, testing, and commissioning, including diagnosing issues, providing quotations, and processing purchase orders.
• Source and fabricate troubleshooting tools, as well as manage the ordering process to ensure spare parts availability and reordering when necessary.
• Prepare documentation for repair cases as required and assist with payment issues related to repair orders.
• Enhance service revenue and expedite repair process turnaround time (TAT), while also managing warranty claims for both local and overseas customers.
• Keep the repair/workshop area tidy and orderly, ensuring that demo equipment remains in operational condition.
• Perform any other duties as assigned from time to time.

Requirements :

• Minimum a Higher NITEC qualifications.
• Preferably with at least 3 years of commercial experience in the Electrical/ Electronic industry. Fresh graduates are welcome too.
• Good understanding of Standard Electrical Schematic Diagrams, and able to perform System, Hardware Testing & Troubleshooting.
• Knowledge and practical use of standard vacuum technology practices is an advantage.
• Service-minded with passion and patience for handling customers.

Roles & Responsibilities

• Prepare final reports for Incoming, In-process and outgoing processes.
• Compile and ensure timely submission of Manufacturing Record Book (MRB).
• Verify external provider's documented information (Incoming or secondary processes).
• Investigate and prepare non-conformance reports.
• Implement and verify corrective actions and ensure compliance with requirements.
• Present NCR findings to Management and customer.
• Liaise with customers on Notification of Inspection schedule and Pre-production meeting.
• Conduct internal training and process improvement plan.
• Involve in quality audits (Internal or External).
• Assist QA Manager on all issues.
• Any ad-hoc tasks which may be assigned.

Requirements

• Diploma or Degree in Engineering. Preferably Mechanical.
• 3 years of working experience in oil and gas industry.
• Familiar with international codes and standards (ASME/ASTM/API).
• Understanding and interpretation of drawing.
• Knowledge in Welding, NDE, CMM and manual inspection will be added advantage.
• Fresh graduates are welcome to apply. Training will be provided.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

C&S Resident Technical Officer

Institution Project at Dover

Job Description:

• Assist RE/Consultant Team to attend to technical and design issues at site and report issues to RE/Consultant Team
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Commencement of work on 1 December 2024.

Job Requirement:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years working experience as a Resident Technical Officer.
• Preferably with experiences in Institution projects.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$4000

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Salary : $3,000 - $4,500

Working hour : 9am to 6pm (Mon to Fri), 9am to 1pm (Alternate Sat)

Location : Admiralty

Job Description:

* Develop detailed electrical system designs specifically for residential buildings and condos, including power distribution, lighting, and electrical layouts for units and shared spaces.

* Coordinate with architects, structural engineers, and interior designers to ensure that electrical plans integrate seamlessly with overall building designs.

* Ensure adherence to local electrical and building codes, focusing on residential construction requirements.

* Implement safety protocols for residential wiring, grounding, and circuit design to protect occupants and prevent hazards.

* Stay updated on the latest energy-saving codes and green building standards that apply to residential developments.

* Supervise electrical installations on-site, coordinating with contractors and ensuring that work is completed accurately and on schedule.

* Oversee inspections, testing, and troubleshooting of installed systems to meet quality standards and avoid post-construction issues.

* Manage budgets, track resources, and optimize the use of materials to meet project timelines and cost constraints.

* Ensure high standards in power distribution for residential buildings, preventing overloads, power surges, and other risks to residents.

Requirements:

* Bachelor’s degree in Electrical Engineering, with coursework or training focused on residential or building electrical systems.

* Min 2 years experience in relevant industry.

* Proficiency in software for electrical design and load calculation, such as AutoCAD, ETAP, or Revit MEP, tailored for residential settings.

* A strong portfolio of completed residential projects, ideally involving high-rise condos or large residential communities, will be advantageous.

* Familiarity with energy-efficient lighting, solar panel installations, and other green energy options is highly beneficial in line with sustainable residential development.

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Soo Yee Hui
Regisration No.: R24120810

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

· Procurement and sales

· Source & procure equipment/ components/ spares, etc.

· Vendor evaluation and registration

· Prepare purchase requisitions

· Price negotiations

· Prepare sales contracts

· Prepare shipping documents

· Management of supplier and client relationships

· Resolve issues related to requirements, substitutions, damages, quality, delivery and other important terms and conditions.

· Ensure accurate and timely payment for invoices

· After sales service

Job Requirements

· Candidate must possess a Diploma in Engineering or Business Admin with at least 5 year(s) of relevant experience in Marine/ Shipyard.

· Strong communication negotiation and interpersonal skill

· Bilingual in English and Mandarin

· Proficient in Microsoft Office applications (Outlook, Excel, Words and Powerpoint, etc.)

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Salary range: SGD $163,000 - $201,000 per annum + RSUs 

What are we looking for?

We are looking for an (Network) Engineer to join the PPI team to expand and maintain direct integrations with payments systems and partners all over the world. 

What is the PPI team?

The PPI team sits within our Platform tribe, which designs, builds and operates the foundational direct integration infrastructure that power the product that moves £4 billion every month. 

This role will give you the opportunity to:

• Work in a modern, cloud heavy environment where remote connectivity is a staple of our tech ecosystem

• Choose your path to impact. We believe people and teams are most empowered when they can act autonomously. So rather than telling you what to do, you’ll work with your team to create a vision of your own. Of course, you can always gather feedback from smart, curious people across Wise but you’ll have the freedom to make your own calls

• You’ll be offered the flexibility to decide on how and where you work. We understand everyone needs a little something different, so we’ll do our best to make it happen.

• Approach new challenges with the freedom to develop novel and customised solutions

• You’ll get to inspire teams with your ideas, knowledge and self-starter attitude.

• Grow as an engineer - understand what problems the business needs to solve and why, then proactively resolve them. We shy away from micro management

• Be part of our mission to make money without borders the new normal

Here’s how you’ll be contributing to the Team

• Design, implement and maintain integrations between Wise and complex financial systems 

• Develop and design scalable and repeatable network architecture and computer systems infrastructure

• Communicate with various stakeholders throughout Wise, plan roadmaps with your team, and work through challenges to determine scope and realistic delivery

• Working and collaborating with our larger platform engineering team and alongside product engineering on global projects

• Work with Leads and Staff Engineers to influence the direction and change current technology implementations in order to improve and modernise current Payment Integrations solutions.

• Ensure reliable connectivity and uptime across all network components.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Requirements

The role requires handling of measurement and detection equipment for military and homeland security. The ideal candidate should possess strong IT skills including, software installation and configuration. The resposibilities includes managing sales product inquiries, overseeing post-sales equipment delivery, performing regular maintenance, and conducting diagnostic analyses for troubleshooting and repair. A keen learning attitude and strong problem-solving ability are essential in this position. The candidate will also be expected to prepare basic reports. Effective communication and interpersonal skills will be important for maintaining and strengthening existing customer relations.

Job Scope

• Involved in planning and development of projects.
• Assist to develop mechanical and/or electrical engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Assist to design mechanical and electrical systems.
• Assist to conduct project assessments and is able to suggest feasible and creative solutions based on the assessment results.
• Support tendering process.
• Assist to plan the team's manpower and provides on-the-job guidance to junior staffs

Requirements

• Degree in Mechanical or Electrical Engineering or related fields
• Meticulous and highly detail-oriented.
• Has a keen interest to incorporate new technologies into engineering design projects.
• Excellent knowledge in mechanical and/or electrical engineering fields
• Good problem-solving skills.
• Good interpersonal and project coordination skills crucial for networking with internal and external stakeholders.
• Required to work both in office and at project sites.
• Applicants with good experiences will be considered for Senior positions