General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• At least 8~10 years of direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

• Bachelor degree in Civil Engineering or related equivalent
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/departmen
• Required skill(s): MS Office, preferable candidate skills
• Minimum 2 years Site/Working Experience

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

• Clementi
• Monday to Friday 830am-6pm
• Salary up to $4700 depends on experience
• L1/ L2 support

Responsibilities:

• Manage and configure IT infrastructure, including systems, applications, network devices, and end user devices, ensuring seamless operations.
• Implement and monitor automated backups, disaster recovery plans, and patches while closely tracking system resource utilization.
• Collaborate with vendors and ensure compliance with Service Level Agreements (SLAs).
• Develop and maintain technical documentation, including user guides and administrative procedures.
• Provide technical support to both local and international users, ensuring network security and efficient resolution of issues.

Requirements

• Minimum Diploma in IT/ Computer Science
• Proficient in managing Microsoft Server and enterprise networking
• Skilled in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall)

Interested candidates, please send in updated resume through “APPLY NOW” or

Email: [email protected]

Whatsapp: 97896683

Dorothy Ooi Shi Hui

Registration Number: R1762852

Workstone Pte Ltd

EA License Number: 19C9998

Responsibilities

• To Provide infrastructure support services to the Systems as well as any other IT systems
• Facilitate the provision of LAN connections to any IT systems
• Facilitate the patching of network points in the Branch Server Room for any IT systems
• Preliminary troubleshooting of any IT systems deployed in the branch, Provisioning and supporting technical issues related to Desktop/Web conferencing and Room-based video conferencing systems

Asset Management services :

• Technical Support services in relation to the following hardware:
• Desktop Computers, Laptops, Touchscreen PCs, Tablets, and other personal computing devices;
• Peripherals such as laser printers, thermal printers, colour printers, and other printing devices;

Operational Support services for Application Systems:

• To provide Operational Technical Support to the Facility Management (FM) teams and the Application teams or suppliers to provide end-to-end Operational Support services
• To provide Operational Support for Application Systems (eg. Library Management System (LMS)).
• Provision of resources, expertise and solutions in information technology to ensure that the existing computer systems continue to meet the intended functionalities and objectives

Requirements

• ITE or Diploma in Information Technology or its equivalent
• A minimum of 2 years relevant experience in an on-site Technical support role
• Knowledge of IT networking with understanding of TCP/IP internetworking fundamentals, and good command of Windows Desktop OS, Microsoft Office suite and e-mail support the ability to handle Level 2 support
• Basic knowledge of ITIL process such as Incident, Problem and Change Management
• Technical knowledge to install systems, upgrade and repair software and hardware
• Hands-on knowledge on DHCP, file/print services, registry modification, VB scripting, and use of other desktop tools would be essential
• Good communications skills, both oral and written

We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,. The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Responsibilities:

• Design, develop, and maintain MS SQL databases, ensuring efficient data storage and retrieval. Perform database optimization, query tuning, and management of large-scale data sets.
• Develop and maintain PowerShell scripts to automate repetitive tasks, system monitoring, and report generation. Ensure smooth integration between different systems and platforms.
• Write high-performance, maintainable, and scalable code using C++.
• Develop scripts for managing and automating server tasks, ensuring reliability and optimal performance of systems.
• Design and implement RESTful APIs, ensuring seamless communication between services and applications. Develop efficient and scalable solutions in line with modern development standards.
• Troubleshoot and debug complex technical issues, identifying and applying solutions timely.
• Maintain clear and up-to-date documentation for all developed systems, scripts, and APIs.

Requirements:

• Min 5+ Years of experience of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

ONSITE JOB PROFILE

a) Support the client in production / industrial engineering activities throughout the product realization activity

b) Study the Project requirements

c) Study the Concept design, development and production support of “tooling equipment” like Jigs and fixtures by employing ‘Computer Aided Design’ (CAD), for all components

d) Understand the Feasibility evaluation and testing of the tooling equipment

e) Prepare“3D CAD models” for the components in confirmation with the client’s standard operating procedures and practices for each production process.

f) Coordination of ECO (Engineering Change Orders) activity as per manufacturing customer’s standards and procedures through the use of SAP tools.

g) understanding and familiarization of the customer’s product and process requirements and training the delivery support team accordingly..

REQUIRMENTS TO PERFORM THE JOB DUTIES

h) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in Mechanical Engineering.

i) 2-4 years of experience in CAD and ECO coordination.

j) Knowledge of Solidworks software is required.

k) Desire for continuous education and training effort.

l) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

1. Performs all works assigned by the Project Director/Associate/Architect/Team Leader to meet the established project objectives (quality and standards) diligently.

2. Reporting to Project Associate/Director on all matters pertaining to design, technical and building code issues.

3. Assist in documentation during Conceptual & Detail Design Development stage.

4. CAD or manual drafting of sketch drawings.

5. Understanding & applying Building Regulations as directed by the Project Associate/ Architect.

6. Able to support, prepare and co-ordinate Autocad / BIM drawings for authorities' submissions via Corenet / Portal

7. Liaising with Consultants on matters of design & technical co-ordination issues and building regulations.

8. Attending Consultants/Site Meetings on matters of design & technical co-ordination issues and building regulations.

9. Works and coordinates with fellow team members on collective assignments.

10. Familiar with local code, regulation, and authority submission

Requirements:

• Diploma/ Degree in Architecture / Interior Design or related field.
• Proficiency in AutoCAD, Revit (or other relevant design software). PowerPoint and sketchup for presentation will be advantaged.
• Ability to adapt to changing project demands and deadlines.
• Ability to work in a team environment
• Excellent communication and interpersonal skills.
• Experience in all aspects of Design from concept through construction will be an advantage.
• Possess excellent technical design skills with an eye for details.
• Keen eye for aesthetics, sensitive in details design with a good knowledge of building materials.

Minimum 5-8 years relevant working experience will be preferred.

Job Description

• Assist in daily close supervision and coordination duties of structural works
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Keep quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors, Stakeholders, Authorities, Interfacing Contractors and the like on execution of works

Qualifications

• Degree/Diploma in Civil/Structural Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• 4-8 years of relevant experience in quality assurance inspections on C&S works for various LTA MRT &HDB building/infrastructure projects
• Contract duration is for up to 36 months
• Full Time
• Work Location :Singapore

• Perform routine and periodic inspections on building services/facilities, submit reports or defect lists to the manager, and carry out necessary rectifications.
• Conduct installations, troubleshooting, and preventive/corrective maintenance on systems such as HVAC, electrical, fire protection, plumbing, and building management systems.
• Address tenant complaints, service calls, and breakdowns, carry out repairs, and submit relevant maintenance reports to the manager.
• Oversee contractors, ensuring maintenance and repair work is done according to specifications, safety protocols, and quality standards.

Requirements:

• Nitec in Mechanical/Electrical Engineering or equivalent
• At least 2 years of experience in performing building inspections, maintenance, and repairs for Commercial Building.
• Strong knowledge in M&E systems (HVAC, electrical, fire protection, plumbing, and building management systems).
• Good troubleshooting and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Job Summary:

Successful candidate will carry out service and maintenance works for security systems at clients’ premises, including but not limited to Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems.

Responsibilities:

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Requirements:

• Min Nitec in Electrical/Electronic Engineering with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Class 3 driving license

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements:

• Diploma in Electrical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Roles & Responsibilities:

· Collaborate with stakeholders to elicit, document, and prioritize business requirements related to payment systems.

· Analyse and translate business needs into functional and technical specifications.

· Work closely with development teams to design and implement File conversion requirements using the mapping specifications.

· Act as the primary liaison between business units, IT teams, and external vendors to ensure alignment and clear communication.

· Support User Acceptance Testing (UAT) by preparing test cases, validating results, and ensuring defects are resolved.

· Make changes to ANSI x12 and EDIFACT map

· Ensure delivered solutions align with business objectives and user expectation

Conduct workshops and presentations to gather feedback and validate requirements.

· Build and maintain strong relationships with key stakeholders to foster trust and collaboration.

· Encourage a collaborative and inclusive work environment that promotes knowledge sharing and teamwork.

Mandatory Skills:

· Knowledge of ISO 20022 messaging standards.

· Knowledge of Boomi Integrations

· Knowledge of APAC Payment types

Requirements:

· Bachelor’s degree in business administration, Finance, Computer Science, or a related field.

· Minimum 5+ years of experience as a Business Analyst, preferably in the payment banking domain and Industry Standards ANSI X12, EDIFACT

· Strong knowledge of payment systems, including TT, FAST. GIRO and other digital payment solutions.

· Proficiency in tools like JIRA, Confluence, MS Office, and process modelling software.

· Handson Experience in Communication Protocols AS2, FTP, FTPS, SFTP, HTTP, FSA etc.

· Handson and minimum 5 years’ experience in EDI Software’s like Sterling Integrators, GHX, SAP, Dell Boomi.

· Good Knowledge in Prototyping Tools Axure RP 8, Balsamiq and IO Draw with Mapping Tools SI Map Editors (8.0)

· Experience with agile and waterfall project management methodologies.

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

Technical Service Manager

• Industry: Manufacturing / Building & Construction
• Basic Salary: Up to $5000 (Depending on experience)
• Working days & hours: Monday – Friday: 8.30am – 5.30pm
• Location: Ubi
• Benefits: AL + PB + Medical Benefits

Job Responsibilities:

• Oversee the Service Department, focusing on growth, profitability, and efficient operations.
• Manage service calls, scheduling, staffing, and inventory control.
• Collaborate with production teams and ensure smooth coordination.
• Lead and develop service staff to meet business goals.
• Build strong customer relationships and grow the service client base.
• Manage debt collection for service customers.
• Provide accurate technical advice and prepare quotations for repairs and installations.
• Communicate schedules and coordinate service crews for timely delivery.
• Maintain high-quality service standards and ensure workplace safety.
• Support preventative maintenance initiatives and business growth.
• Prepare and process invoices and service paperwork.
• Resolve customer, supplier, or operational disputes effectively.
• Notify Directors of incidents or issues and ensure compliance with company policies.

Job Requirements:

• Min. Nitec in Mechanical or equivalent will be an added advantage
• Min 3 years of relevant experience in Building & Construction OR Electrical with mechanical or technical knowledge is preferred
• Strong knowledge of the company’s products and customer service needs.
• Proficient in Microsoft Office and general computer applications.
• Prior experience in team leadership and management skills.
• Excellent time management and ability to meet deadlines.

Interested applicants please send your resume to [email protected]
We regret to inform you that only shortlisted candidates will be contacted by our consultants.
Align Recruitment Pte Ltd (20C0253)
Rei Lai Yu Wen (R2199207)

Location: Tai Seng

Working Hours: Mon-Fri (8.30am-6pm)

Overall Responsibilities:

• Follow MRP to release POs (Purchase Orders) or RFQs (Request for Quotations) to suppliers.
• Coordinating with overseas & local suppliers regarding purchase-related issues and tracking shipment status.
• Responsible for overseeing procurement, logistics, and production planning.
• Ensure cost-effectiveness, quality, and timely delivery in all procurement functions.
• Identify potential suppliers and conduct market research to assess their capabilities.
• Evaluate and appraise suppliers for machine components, materials, and procurement products from both local and overseas sources.
• Utilize negotiation skills to secure favorable pricing, payment terms, and lead times, ensuring punctual deliveries.
• Closely manage, maintain, and monitor EC (Engineering Change).
• Maintain warehouse stock levels to adequately support production.
• Communicate effectively with key stakeholders on all levels.
• Able to work on complex issues where analysis of situations or data requires an in-depth evaluation of variable factors.
• Exercise judgment in selecting methods, techniques, and evaluation criteria for obtaining results.
• Determine methods and procedures on new assignments and may coordinate activities of other personnel as a team lead.
• Provide Management with data and reports related to purchasing activities as and when required.
• Periodic review to Management on purchasing system improvements and streamlining purchasing processes.
• Performing any additional ad-hoc duties as assigned by the department manager.

Requirements:

• Preferably with a Degree in Business/Purchasing/Supply Chain Management or a related discipline.
• Minimum 2 years of purchasing experience in the MNC Manufacturing industry.
• Proficient in MS Office
• Proficient in SAP/ORACLE/SYSPRO/BAAN/related MRP&ERP
• Resourceful and meticulous with excellent negotiation, problem-solving, and communication skills with Vendors and Stakeholders
• Good interpersonal skills with the ability to communicate with people at all levels.
• Able to work independently and a good team player.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

Technical Programmer |

Responsibilities:

• We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,.
• The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Requirement:

• 3 to 5 Years of experience In field of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

Interested candidates, please send your CVs on [email protected]

Regret to inform that only shortlisted candidates will be notified.

CEI: R1988671

EA License: 14C7275

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Job Descriptions:

• Execute sales strategies to penetrate the target market and expand the customer base.
• Conduct presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.
• Manage relationship with clients to understand their unique needs and tailor solutions that align with their business objectives.
• Work closely with technical experts to design customized solutions that address client challenges.
• Provide regular updates on sales activities, pipeline, forecasts, and performance metrics to senior management.

Job Requirements:

• Candidate must possess at least Diploma/Bachelor's degree in Business, Marketing, or a related field.
• Experience in hospitality would be an added advantage
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.
• Willingness to travel locally for client meetings and industry events as required.
• Highly motivated, resourceful, and independent worker who is proactive and customer-focused.
• Fresh graduatesare welcomed!

Rewards:

• Opportunities for career advancement
• Free lunch in office provided
• Free transport to/from office

• Basic Salary up to $9500
• Mon to Fri: 8.30am to 6.00pm
• Location : East
• Permanent Role + VB + 16 AL

Job Responsibilities:

• Prepare and submit Single-Line Diagrams (SLD) and drawings for FAT.
• Develop and implement design strategies for successful project execution.
• Ensure smooth collaboration among multi-disciplinary teams, meeting deadlines and budget.
• Oversee the design process with technical expertise.
• Advise on material selection and procurement decisions.
• Work with clients to meet expectations.
• Review designs with a focus on health, safety, and compliance.
• Ensure adherence to contractual requirements and Singapore standards.
• Maintain thorough documentation throughout the design process.
• Manage design processes to meet schedule and budget.
• Stay updated on building regulations and design best practices.

Job Requirements:

• Degree in Electrical Engineering or 5 years of consultancy and project work background.
• Preferably a registered Professional Engineer with the Professional Engineers Board, Singapore.

☎ Call 6817-2691

✉ WhatsApp 9422-1220

EA License No: 15C7752

EA Personnel No: R22111807

EA Personnel Name: Yap Teng hui