• Perform the project engineering design work.
• Liaise with clients, vendors and third parties on technical discussions and document submission.
• Coordinate with project team on the project planning and execution.
• Supervise and check the design drawings, material take-off and shop drawings
• Perform structural analysis and prepare structural analysis report.

Qualification

• Degree in civil/marine engineering / naval architecture
• Min. 2 years of structural design experience in offshore or civil engineering
• Being Familiar with and experience in international structural aluminium and/or offshore structure design codes and standards to be an advantage
• Knowledge in Staadpro/Tekla to be an advantage.
• An effective team player, problem solver and self-motivated
• Good written and spoken English.

• Lead the project engineering design work.
• Liaise with clients, vendors and third parties on technical discussions and document submission.
• Coordinate with project team on the project planning and execution.
• Supervise and check the design drawings, material take-off and shop drawings.
• Perform structural analysis and prepare structural analysis report.

Qualification

• Degree in civil/marine engineering / naval architecture
• Min. 5 years of structural design experience in offshore or civil engineering
• Being Familiar with international aluminium and/or offshore structure design codes and standards to be an advantage.
• Knowledge in Staadpro/Tekla to be an advantage.
• An effective team player, problem solver and self-motivated
• Good written and spoken English.

Control Engineer

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

Well-versed in retrofitting of Engine and crankshafts within time

· With enriched experience in troubleshooting of two stroke and four stroke engines

· Sound knowledge in framing and executing of scheduled maintenance plans, estimates, and contract specifications.

· Well adapted to Preventive, Conditional based Predictive & Break down maintenance of Engines and plant utilities

· Laid down SOP’s and MIS reports and have knowledge in implementation of ISO-9001 -2001, 18000 - 2007, 14000 – 2007.

· Conducted operational and performance tests on marine machinery and equipment on behalf of makers like Hyundai and Yanmar.

· Prepared technical reports for the final evaluation by regulatory and insurance bodies.

Your duties shall cover but not restricted to the following:

• Provide technical expertise to support end-to-end project management, from tender estimation, project scoping, sub-contractor selection, drawing submissions, on-site project execution, to testing & commissioning and project handover
• Coordinate the procurement and delivery of materials and subcontractor services as per project plan
• Supervise and ensure ongoing works on-site are on track according to project schedule
• Prepare M&E Combined Service Drawings (CSD) to facilitate effective site coordination with all project stakeholders
• Prepare Power Interruption Plan (PIP) for project-related shutdown activities, including effective communication of PIP to all project stakeholders
• Preparing project progress reports for director, consultants and clients
• Attend site surveys, coordination meetings with consultants, sub-contractors and any relevant authorities
• Prepare payment claims and variation orders for project contracts
• Provide emergency response for fault tracing and troubleshooting as and when required at client sites
• Ensure adherence to and enforce Bizsafe work safety methods, RA, MOS, procedures and policies regarding all site activities

Requirements

• Hardworking and positive attitude, strong sense of responsibility, willingness to learn
• Degree in Mechanical / Electrical Engineering or Diploma with work experience
• Good written and spoken English
• Candidates with prior working experience in the construction industry will have a strong advantage
• Ability to multitask is important, as engineer will be expected to handle multiple projects simultaneously
• Proficient in Microsoft Office, Basic knowledge in Microsoft Project and CAD will be useful
• Strong knowledge in 3 phase 4 wire electrical distribution system, electrical single line diagram, cable sizing, protection circuit, protection discrimination and setting
• Basic understanding of ACMV system operation, including key equipment such as chillers, CWP, CHWP, CT, valves, AHU, PLC system
• Good knowledge of relevant industry codes of practice and standards (especially SS638 / CP5) and site installation procedures, with familiarity in M&E work methods and sequence

Interested candidates should send an email to [email protected] with full resume, contact details, last drawn & expected salary. Only shortlisted candidates will be contacted.

• Understanding and carrying out all tasks given by the Senior Engineer.
• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.
• Ensuring all expenses stay within the allocated budget.
• Performing regular inspections of equipment and scheduling maintenance or repairs.
• Providing assistance to different staff or engineering teams.
• Inspecting inventory and reporting inconsistencies as well as ordering more materials.
• Producing CAD drawings according to specifications.
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Participating in various learning experiences, which may include attending workshops and training sessions.
• Calibrating and troubleshooting equipment as required.

Requirements:

• A completed apprenticeship or similar experience is recommended.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Practical experience using CAD software may be required.
• Ability to follow instructions and to collaborate with others.

• Marine & Offshore industry
• Basic $4000 - $6000
• 5 days (8.30am – 6.00pm)
• Location: Penjuru Lane
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Commissioning and integration: Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities:

· Attend to work orders allocated by Maintenance Engineers

· Analyse process parameters, alarms and information / drawings to diagnose and trouble shoot equipment problems

· Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently

· Perform unit functional test for re-commissioning of overhaul units

· Lead in the repair or replacement defective or malfunctioning components of machinery and equipment

· Assess spare part requirements and raise purchases, record parts and materials used and review tender quotations

· Coordinate logistic arrangement for all maintenance activities

· Maintain a safe and orderly work area by practicing organised housekeeping

· Preparation of weekly activity reports

· Perform other duties as assigned by supervisors

Requirements:

· Diploma in Electrical / Electronics Engineering or equivalent

· Self-driven, with good working attitude and a good team player

1. To meet up with the Clients, developer, contractor and all the stakeholder.
2. To maintain good relationship with clients, developer, contractors and all the stakeholder.
3. To maintain Existing Clients and build up on the Expansion.
4. To fulfil the Clients, developer, contractor and stakeholder requesting on Estimate, quotation and Tendering.
and all the KPI requirements of the Contracts.
5. To have minimum 1 year or more experience in Building, Plumbing and Sanitary works.
6. To Standby 24/7 for urgent call and response to site if needed.
7. To prepare and submit weekly report to the Project Manager on the sale forecast and works updates.
8. To engage and Coordinate with Specialist and Sub Contractors.
9. To manage team of 10 members.
10. To have a Class 3 Driving Licenses preferably with own car.
11. To have knowledge in Building, Plumbing and Sanitary works COP.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Take charge of all aspects of electrical engineering in the design of electrical transmission cable system, switchboard, MCC and control.
• Knowledge in relevant standards of IEC for cable manufacturing, testing and installation.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Provide technical expertise in the development of electrical engineering plans, specifications, and
• Conduct feasibility studies, budgeting and technical evaluations to support decision-making processes for new ventures and projects.
• Identify, analyse, and resolve design issues and technical problems related to electrical systems.
• Participate in design reviews and provide technical guidance and support to other team members.
• Ensure that electrical systems comply with industry standards and regulations, including safety standards.
• Support manufacturing and installation teams during system deployment and testing phases, including hands-on installation and cable termination works.
• Perform other duties or tasks as assigned by immediate supervisor or HOD.

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in supply transmission cable would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / Applicants with more than 3 years of relevant experience may be considered for more senior positions.
• Strong knowledge of electrical engineering principles and practices.

• Only Singaporeans
• 6 days’ work week
• Preferably possess a valid Class 3 license

Other Benefits

• Portable Medical Benefit Scheme (PMBS) - additional monthly contribution direct to Medisave account 
• Medical Teleconsult 
• Medical benefits (applicable for dental and company provider health screening)

Job Description

Supporting the Mechanical Maintenance team, you will be responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities

· Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently

· Perform repair or replacement of defective or malfunctioning components of machinery and equipment

· Assist with the monitoring of contractors involved in maintenance on site and maintain asset maintenance plans

· Attend to work orders allocated by Mechanical Engineers

· Perform other duties as assigned

Requirements:

· Diploma in Mechanical Engineering or equivalent

· Self-driven, with a good working attitude, and a good team player.

Job Description:

• Configures and installs various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS)
• Performs network maintenance and system upgrades including service packs, patches, hot fixes and security configurations
• Monitors performance and ensures system availability and reliability
• Monitors system resource utilization, trending, and capacity planning
• Provides Level-2/3 support and troubleshooting to resolve issues
• Works within established configuration and change management policies to ensure awareness, approval and success of changes
• Selects and implements security tools, policies, and procedures in conjunction with the company’s security team
• Liaises with vendors and other IT personnel for problem resolution

Requirements:

• Bachelor's degree in Computer Science or related disciplines
• At least 5-7 years of similar experience
• Proven hands-on network engineering experience
• Certified in CCNP or higher (CCIE and/or CISSP highly valued)
• Good understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS)
• Good understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic and network analytics tools

Our Addresses and Working Hours:

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities:

• Responsible to provide Electrical & Instrument (E&I) support to maintenance and operations of the plant
• Maintenance strategy planning and implementation
• Predictive and preventive maintenance (PPM) planning
• Lead failure root cause analysis, analyze asset availability and drive improvement in E&I reliability
• Risk management which includes PPM strategy, equipment/parts obsolescence, spare optimization.

Job Requirements:

• Bachelors or Masters degree in Electrical & Instrumentation Engineering
• Candidate with 1 to 2 years of experience in a chemical industry/manufacturing environment will be an added advantage.

Job Highlights

1. 5.5 working days
2. Flexibilty for career growth & development
3. Enjoy positive working environment
4. Company provision of training opportunities

Job Description

1. For all projects and sites to work closely with project manager to meet completion time
2. Managing on site workers to ensure smooth work flow

Required Skills

1. To have basic problem solving skills and able to work within given timeline
2. To have basic computer skills in Microsoft Office, AutoCAD and replying to emails
3. To have basic M&E skills and knowledge

PRINCIPAL ACCOUNTABILITIES

Internal Sales Engineer is responsible for the preparation and delivering technical presentation and quotations explaining products or services to customers and engineers to assess equipment/screens needs and to determine customer’s requirements.

JOB RESPONSIBILITIES

1) Maintain existing customers' accounts.

2) Respond to customers' enquiries, follow-up and provide solutions to clients.

3) Review and prepare sales quotation as per customer's enquiries.

4) Provide regular update to customers on project development in a timely manner.

5) Prepare weekly and monthly sales report. Conduct PPM (pre-production meeting).

6) Sales coordination between factory and overseas sales offices.

7) Liaising with customers on technical specifications.

8) Conduct a thorough contract review with the clients prior receiving Sales Order confirmation.

9) Ensure correct and full information about the Sales order are passed to engineering and production. Able to prepare job sheets with all relevant client requirements in it.

10) Support team in preparing marketing, sales & presentation materials.

11) Provide information to team on market forecast and participate in market analysis.

12) Willing to travel when and if needed.

13) Sales follows-ups. (Temporary) To include partial Supply Chain role:

8.1 Pipes & Raw Materials ordering

8.2 Pipes & Raw Materials cost controlling

- Prepare supply agreements

14) Ensures 5S is implemented in the work area.

15) Adheres company’s guidelines with regards to Safety and Quality.

16) Complies to Company Code of Business Conduct.

17) Promote and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments.

3. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

4. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

5. Manages complexity – making sense of complex, high quality and sometimes contradictory information to effectively solve problems. Asks the right questions to accurately analyze situations.

QUALIFICATION GUIDE

1. Education : Minimum Diploma in Mechanical Engineering, petroleum or any engineering related course

2. Communication : Fluent both in oral and written English and/or Chinese

3. Experience : Proven and Solid 5 years of work experience in the same field and in the Oil & Gas equipment Manufacturing Environment

4. Software/Hardware : Presentation tools, sales/CRM tools, Microsoft office( word, ppt, Excel – pivot, vlookup), ERP System. Preferably has some knowledge on CAD tool like solid works, inventor or pro-E and able to read drawings.

Company Description

Mitra Engineering Services is focused on the sale, installation and maintenance of Industrial Air Filtration Equipment which eliminates dust & other airborne containments. This preserves worker health & safety, while maximizing operational productivity & cleanliness.

Roles & Responsibilities

Manage engineering projects from inception to completion.

Coordinate with clients and cross-functional teams.

Develop project plans and timelines.

Monitor progress and implement solutions.

Ensure projects are on budget and meet quality standards.

Source materials and oversee documentation.

Provide technical support to team members.

Adhere to safety guidelines.

Stay updated on industry trends and best practices.

Requirements

Minimum Education Background: Technical Qualifications /Polytechnic Diploma in Mechanical/Electrical Engineering.

Usage of AutoCAD required

2 years’ experience in similar drafting role

Strong technical knowledge

Must be eager to learn and can work independently

Plus Points

Prior engineering design experience in industrial equipment, dust control, blasting, HVAC systems etc.

Possess own transport (transport allowance provided)

Manager, Technical Service Singapore

Volvo Bus Asia Pacific is one of the leading clusters within Volvo Bus Corporation (VBC) and has a proud history of profitability and growth. It is responsible for Bus vehicle and Service sales business, partnership with Volvo’s own and private importers, key customers and body build partners, and progress of the Volvo Buses total business within the region.

We are looking for a technically competent and passionate individual to join the Volvo Bus Singapore team as Manager, Technical Service Singapore.

Reporting to the Country Manager, Volvo Bus Singapore, the Technical Service Manager has the responsibility of providing technical and service support for Volvo products to our private dealer, institutional and fleet customers. The Manager will also guide and liaise with the Service Dealer to ensure customer satisfaction through delivery of prompt, customer-focused and high-quality technical solutions in a timely manner thus ensuring uptime of bus operations.

Technical Service:

· Provide hands-on technical solutions and support in a timely manner to all Volvo bus customers for Volvo product / buses operating in Singapore.

· Support with troubleshooting, technical requests and escalations and conduct field investigations.

· Train, upskill and provide technical support to Volvo’s private dealer in Singapore.

· Liaise with Volvo Headquarters and other technical teams for swift solutions on technical service issues affecting customer operations.

· Co-ordinate with the technical managers in APAC Central and Malaysia along with the Dealer Network in Singapore and Malaysia to ensure seamless cross border service support and minimized downtime for cross border private bus customers.

· Develop and maintain relationship with all stakeholders (for eg. Authority, PTO’s, Private dealer, key suppliers, and body building partners).

· Proactively monitor field service issues, including escalation of repeated failure, leading to submission of technical case which can lead to improved solutions (campaigns) to help improve product quality.

· Coordinate and manage stakeholders to ensure seamless delivery (Chassis inspection / Pre-Delivery Inspection / acceptance) of new vehicles to Singapore customers.

· Partake in scheduled monthly or quarterly technical service meetings with Public Bus Operators, Authority and Private Dealer.

· Perform connected-vehicle data analysis to enhance & broaden customer value proposition.

· People Management - Manage Volvo bus service personnel.

Monitor & Reporting:

· Warranty management – Analysis and review of claims & budget for Singapore.

· Monthly submission of top 5 quality and service meeting and required items to APAC APAC Central technical manager.

· Monitor new campaign releases and ensure campaigns are implemented on vehicles in a timely manner. Report campaign completion status to APAC Central technical manager.

· Other adhoc duties as requested by the Country Manager / APAC Central technical manager.

Service Systems support:

· Be the super user for select Volvo systems within the market.

Training:

· Deliver / Co-ordinate technical training to be provided to Public Transport Operators, dealer network and Singapore Bus Academy (SGBA) / Land Transport Authority (LTA) in conjunction with APAC Central technical manager & APAC Training Manager.

Requirements

· A technical service professional with 6 to 10 years’ experience in the bus / truck industry.

· Good service, workshop, and customer facing process knowledge.

· Strong hands-on problem-solving experience with in-depth technical and electrical knowledge.

· Customer-focused, excellent client communications skills to work and build relationships with key customers, new dealers, business partners and internal team.

· Ability to learn on the fly, work in a cross-functional, multi-cultural team and adapt to challenging environments.

· Proven ability to lead and coach people.

· Experienced in conducting training and develop training plans.

· Good verbal and written communication skills.

· Open to frequent local travel and occasional international travel.

Qualifications

· Bachelor’s Degree in Mechanical, Electrical or Technical Engineering or related qualifications

· Experience in working with technology and productivity tools including MS Office, Excel & PowerPoint

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

• Bachelor degree in Computer Science, Computer Engineering or equivalent.
• At least 3 years' experience of working as a developer/analyst in data field.
• Experienced with the Systems Development Life Cycle (SDLC) implementation methodology.
• Hands-on experience with the creation of business specification, technical specification, SIT test documentation, and UAT sign-off process.
• Good knowledge of implementing ETL pipelines using Informatica and/or Python on data warehouses and data platforms, such as RDBMS, Snowflake.
• Exposure and knowledge in the following technologies is advantageous:
o SDLC Process – Confluence, Jira, change request, SIT/UAT, CICD
o Documentation Writing – Business specification and technical specification
o Big Data Platforms – Snowflake
o Operating System and Tooling – Informatica, Linux, Python, Shell Script
o SQL Databases – Oracle, MS SQL
• Understand and apply good industry practice of code versioning, testing, CICD workflow, and code documentation.
• Good communication skill required to interact with data stewards, data engineers, and business users to understand the requirements.
• Good at working with details and is meticulous for operations.

Responsibilities:
• Understand the requirements and create the documentation for business specification, technical specifications, and SIT test cases for data pipelines and internal processes following industry best practice and GIC guidelines.
• Set up the data pipeline infrastructure strictly following the organization’s technical guidelines and best practice.
• Perform data pipeline enhancements to reduce data quality and operational issues and improve the user experience.
• Perform data pipeline monitoring and job recovery following team arrangement.

Responsibilities:

• Optimize machine usage with WIP loading plan.
• Plan job flow, hours estimation and schedule process timeline using TTPS and OPS to procedure.
• Arrange outsource process requisition as per team’s decision to assist resolve bottleneck issues.
• Design drawings and job folder issuance.
• Monitor job progress & feedback timely to person-in-charge.
• Calculate internal cost estimates to justify for sub-out.
• Plan and ensure raw material, mold base and standard component requisitions are as per schedule.
• Purchase toolroom accessories and negotiate prices and prepare Purchase Requisitions.
• Monitor quality and feedback timely to person-in-charge.
• Involve in Continuous Improvement Programme.
• Update tooling status on daily basis.
• Prepare weekly machine downtime report to General Manager.
• Reject outsource request from operation if capacity does not allow or has not been agreed upon or MRR is not produced.
• Outsource if internal capacity is deemed overloaded.
• Re-prioritize job schedule according to superior’s request as per customer’s requirement.
• Reject raw materials, mold bases and standard components that do not meet requirements.

Requirements:

• Diploma or Degree in Mechanical Engineering
• Mold design & fabrication processes, molding processes, project management.
• Mold making processes with basic machining knowledge.
• Able to interpret 2D drawings.
• Independent with good initiative and able to multitask in a fast-paced environment.

• Provides repair recommendations of customer equipment that are cost effective, follow the standard practices of the facility, and are in accordance with industry requirements.
• Provides engineering support to the facility, vendors, and customers during the repair process to ensure project is completed successfully
• Prepare drawings, information and documentation which meets engineering standards to enable the manufacturing group and other departments to produce and market the Company's product
• Carry out product analysis and work under the guidance of more senior Engineers to meet customers' and/or the industry's needs.
• Evaluate equipment condition and specify remanufacture.
• Work within stated procedures to ensure that design records/controls are maintained.
• Be familiar with company products, design principles, manufacturing techniques and industry standards.
• Interface with other Engineers, vendors, and customers to successfully complete repair, assembly and testing of project equipment
• Bachelor of Science in Engineering, Mechanical field
• Passionate in engineering initiatives and improvement process

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Develop project scopes and objectives, involving all relevant stakeholders and ensuring technical feasibility

• Organize and coordinate internal resources and third parties/vendors for the flawless execution of projects

• Oversee the timely delivery of all projects, ensuring they remain within scope and within budget

• Allocate resource and ensure their availability

• Prepare a detailed project plan to track progress

• Monitor project performance with the helps of appropriate systems, tools and techniques

Position Overview: As the Technical Purchasing and supply chain Manager, you will play a crucial role in overseeing and optimizing the procurement process for technical and marine-related materials. You will be responsible for sourcing, negotiating, and managing relationships with suppliers to ensure the timely and cost-effective acquisition of goods and services required for our marine service and repair operations.

Responsibilities:

1. Strategic Sourcing:
   • Identify and evaluate potential suppliers for technical and marine-related materials.
   • Develop and implement effective sourcing strategies to ensure a reliable and cost-effective supply chain.
   • Maintaining and Managing complete database of the Procurement in all the related repair segment
2. Supplier Relationship Management:
   • Cultivate and maintain strong relationships with key suppliers.
   • Negotiate contracts, terms, and conditions to secure favorable agreements for the company.
   • Managing vendor registration process and inclusion
3. Material Procurement:
   • Coordinate the procurement of technical materials, spare parts, and equipment required for marine service and repair projects.
   • Monitor inventory levels and ensure timely replenishment to meet operational demands.
4. Cost Management:
   • Analyze market trends and pricing to make informed purchasing decisions.
   • Implement cost-saving initiatives without compromising quality or operational efficiency.
5. Quality Assurance:
   • Work closely with the operation team to ensure that purchased materials meet or exceed the required standards.
   • Implement processes for the inspection and testing of received goods.
6. Compliance, Documentation and reporting :
   • Ensure compliance with industry regulations and company policies.
   • Maintain accurate records of procurement activities, including contracts, purchase orders, and supplier performance evaluations.
   • Maintain and a submit official procurement report for all purchase and vendor related activities.
7. Team Collaboration:
   • Collaborate with other departments, such as Operations and Maintenance, to understand their technical requirements and align procurement activities accordingly.

• To provide industrial engineering support to shop production, internal & external customers in manufacturing process development, tools & fixture design and implementation, machines programming, procedure development as per engineering BOM requirement and business need
• Create manufacturing process (routing) and procedure (work instruction) per engineering BOM, quality plan and manufacturing process requirement.
• Design tooling and fixture as manufacturing process and operations’ needs.
• Design CNC machines programming and PLC recipe as process requirement and productions schedule.
• Analyze and continuously improve manufacturing process to achieve best production safety, quality, and cost performance.
• Evaluate and implement new manufacturing technology for shop operations objectives, manufacturing capability and capacity improvement.
• Develop and provide training for shop technicians for new products, process, tooling and others’ needs.
• Perform other technical support or projects as required
• Degree in Mechanical / Manufacturing Engineering.
• Familiar with CAD / CAM 2D drawing and 3D modelling.
• Lean Manufacturing or Six Sigma knowledge will be an advantage.
• Familiar with MS software

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Develop project scopes and objectives, involving all relevant stakeholders and ensuring technical feasibility

• Organize and coordinate internal resources and third parties/vendors for the flawless execution of projects

• Oversee the timely delivery of all projects, ensuring they remain within scope and within budget

• Allocate resource and ensure their availability

• Prepare a detailed project plan to track progress

• Monitor project performance with the helps of appropriate systems, tools and techniques