Responsibilities

• Provide Engineering Guidance at the project site to subcon, craftspeople, operatives and supervising the junior engineers.
• Coordination with various stakeholders, such as Authorities, clients, QP, Consultant traffic team, LTA term contractors and etc.
• Attend meeting with clients or government representatives to update them on the status of the project.
• Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.
• Deal with arborist on site works to meet NPARKS requirement

Requirements

• Minimum bachelor degree in engineering studies.
• Minimum 5 years of experience in road alignment design and traffic engineering after graduation, and good experienced in LTA’s design standards.
• Possess efficient communication and interpersonal skills
• Good presentation skills

For interested applicants, kindly send your resume in WORD format to [email protected], we regret to inform that only shortlisted candidates will be notified.

Crystal Cai
EA Licence No.:17C8502
Registration ID: R1655093

• Manage and monitor all installed systems and infrastructure
• Install, configure, test and maintain operating systems, application software and system management tools
• Proactively ensure the highest levels of systems and infrastructure availability
• Monitor and test application performance for potential bottlenecks, identify possiblesolutions, and work with developers to implement those fixes
• Maintain security, backup, redundancy and BCP strategies
• Participate in the design of information and operational support systems
• Liaise with vendors and other IT personnel for problem resolution
• Manage the VMWare environment
• Provide enterprise-wide support to a high level of Microsoft Windows
• Support the HPE and Hitachi environments
• Provide support in a 24/7 environment and would require to work on-call at least 1 week every monthJob

Requirements:

• Diploma / Bachelor Degree in Computer Science or equivalent
• IT System Management experience of various aspect
• Possess initiative, positive attitude and strong passion in operation support
• Good communication skills and able to work independently;
• Able to start work immediately or within a short notice is an advantage
• Minimum 5 years of knowledge of the following technologies:

1. VMware vCenter: ESXi, SRM, VRM
2. Security operation and technologies such as Privileged Access Management, Endpoint Protection Platform, Firewall
3. System MonitoringoBackup And Recovery
4. Windows Server OS with good understanding of Windows AD, DNS, GPO and Failover Clustering – Having certifications will be advantageous.
5. SAN storage with good understanding of remote site replication (Knowledge of administrating Hitachi Virtual Storage Platform would be an added advantage) – Having certifications will be advantageous.

• Good understanding of Public Key Infrastructure and Network Access Control
• Preferably From an SI environment
• Minimum 3 project cycles in a role of senior system engineer.
• Strong troubleshooting skills
• Have experience working with cross-functional team

Job Highlights:

• Basic up to $4500 + Performance Bonus (Twice a year, Jun / Dec)
• Mon to Fri 9am - 6pm
• The office is located at Kian Tech Road
• 
  

Job Responsibilities:

Main job scope: understand the customers' inquiries and give them professional advice, oversee the schedule and coordination of test jobs with other departments.

• Ensure client instructions were properly documented and communicated downstream
• Interpreting of customer's documents and ensure Customers' instructions align with the work scope stated in quotation.
• Cross-reference customer's instructions with reference specification(s)
• Ensure proper markings of Samples for machining/cutting
• Comprehensive and accurate input in DWO
• Check for all internal (e.g., quotation) and external (e.g., mill certificate) documents and upload to system
• Ensure instant update of the documents whenever there are changes
• Ensure instant communication of any changes to downstream personnel
• Oversee the scheduling and coordination of the test jobs with Workshop and Testing Department(s), including ensuring there is prioritization of jobs
• Ensure anticipation of longer lead time for jobs that require special preparation works for specimens or fixtures
• Understand customers' testing objectives and Attend to Customers' enquires and to provide professional technical advice
• Work with Draftsman to draw up sample plans to advise customers and instruct workshop on cutting/machining

Job Requirements:

• Master of Science or Master of Engineering in Mechanical Engineering / Material Science; or
• Bachelor of Science or Bachelor in Mechanical Engineering or Material Science
• At least 4 years in an ISO 9001 Manufacturing or QAQC role or equivalent; or
• 4 years of experience working under an ISO 17025:2017 based Quality Management System (QMS)
• Strong knowledge in common metallic materials and alloy specifications and chemical composition, especially in steels, stainless steels, nickel alloys, cobalt alloys, aluminium alloys, titanium alloys.
• Good knowledge on metallic material properties and their industrial purposes
• Good knowledge of welding consumables and processes and their applications
• Good Understanding of measurement uncertainty and factors contributing to it
• CWI or CSWIP 3.1 (will be an added advantage)
• PCN Level 2 in Visual Inspection (will be an added advantage)

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by the company relating to this job application.

We regret to inform you that only shortlisted candidates will be notified.
We wish you all the best in your career search.
You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Tan Chin Yee (Cindy) | EA Personnel No.: R23116373

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be hybrid.

Senior Software Test Engineer

Your Responsibilities

• Ensure processes used for system testing are adequate and appropriate.
• Develop manual test procedures.
• Work closely with the development team to ensure that Leica Microsystems products meet (and exceed) end user expectations.
• Develop and maintain software system and user acceptance tests and scripts based on product requirements.
• Procure, create and manage test data required.
• Executing software system and user acceptance tests and producing test logs and issue reports.
• Management of test coverage to ensure all requirements are adequately tested.
• Participate in troubleshooting and triaging of issues to generate root cause identification and resolution.
• Support development of automation testing routines in different programming languages (eg. As C#) using appropriate tools (eg. B. SpecFlow) to achieve a more efficient testing process of software.
• Comply and adhere to company Quality Management System and Environment, Health & Safety requirements. (For all except Top Management, Managers and Supervisors).
• Ensure the department operates under the Quality Management System and Environment, Health & Safety (EHS) requirements and to address EHS issues raised by associates (For Top Management, Managers and Supervisors).

Your Profile

• Bachelor or master’s in engineering or science. Good knowledge of methods for software - verification. Good knowledge of at least one high-level language (programming language). User knowledge of automatic testing tools.
• Experience in device/embedded software testing.
• Knowledge of software development methodologies preferably Scrum or other agile methodologies, and software test methodologies.
• Be excited about collaborating and communicating closely with teams and other stakeholders via a distributed model to regularly deliver solutions.

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us
• We have no room for prejudices and stereotypes. We promote equal opportunities, diversity and inclusion.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

At Leica Microsystems we believe in designing a better, more sustainable workforce. We recognize the benefits of flexible, hybrid working arrangements for eligible roles and are committed to providing enriching careers, no matter the work arrangement. This position is eligible for a hybrid work arrangement in which you can work part of the time at the Company location identified above and part of the time remotely from your home. Additional information about this hybrid work arrangement will be provided by your interview team. Explore the flexibility and challenge that working for Leica Microsystems can provide.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Must have 4 skills : Windows + Linux + Cloud + Openshift

Infrastructure Management

•Drive infra project life cycle – Server provisioning to Cutover.

•Work with infra and app teams on requirement gathering to implementation.

•Review and analyze infrastructure architecture and identify the gaps.

• Expertise on Infrastructure Project builds / Management.

• Expertise in OS Administration ( Windows + Linux + AIX ), Apache, JBOSS, IBM WebSphere , IBM IHS , IIS Administration.

• Expertise in administering AWS Cloud, containerization technologies (Kubernetes, Docker, ECS, EKS).

• Skilful knowledge on CHAOS Engineering.

• Candidate with operational experience, preferably in support of critical application systems will have an advantage.

• The candidate should have strong infrastructure/technical background with knowledge on Open Systems platform, Firewall and load balancer, and moderate information security knowledge

• Have good leadership skills in working with application teams and service providers in defining infrastructure deployment plan, cutover/migration strategy and test plan.

• Have a good understanding of ITIL processes

•Perform RHEL OS patching and other administration tasks for cloud projects

•Guide app team to troubleshoot infra related issues.

•Be the SME for Linux administration and automation.

Operation & Process:

•Prepares technical project plans for new initiatives in BAU

•Collaborates with Application teams and other infra teams to develop technical solutions and enhancements.

•Drive the on boarding of new applications on to the production environment.

Maintain Security:

•In accordance with Bank’s security directives, assists to deploy, maintain, and enhance the security of all infrastructure systems through administrative, preventive, detective, and reactive controls, such as change and configuration management, anti-virus measures, patch management, and system scans.

Requiements

•At least 4-7 years of relevant Infrastructure support and OS administration

•Minimum 3 years hands-on working experience managing production application support

•Knowledge in MQ, Elastic Search, AWS would be preferred

•Hands-on experience in RHEL 6/7 OS patching, administration and shell scripting.

•Good command in Microsoft Office products.

•Experience in monitoring tools like Dynatrace would be handy.

•Must have good communication and writing skills. Able to drive meetings and coordinate different stakeholders.

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

The roles is primarily responsible for maintaining the plant automation system, ensuring latest program & software backups are archived & readily available for all Programmable Electronic Systems (PLCs, HMIs, SCADA, VFDs etc), Calibrations are done in time, any changes to automation systems are approved and tracked through change control process , critical automations spare parts are available, automation maintenance & calibrations are carried out with in allocated budget & also supporting the automation Design, development , implementation & validation of new automation systems including digital factory & digital asset security initiative.

Responsibilities:

• Support BIS, Operations and Maintenance groups throughout the organization as an escalation point for technical issues and advice related to plant automation, instrumentation & control systems.
• Support any projects / capex involving automation by directing and monitoring vendor activities including design, development and testing; evaluate vendor documents including System Design Specifications.
• Maintain operational as-built and operating documentation for plant control system infrastructure.
• Manage contracts and vendors related to plant automation support.
• Ensure automation systems comply with regulatory guidelines. Maintain the validated status of production equipment and associated control systems, in accordance GMP requirements
• Leads projects, when assigned, including developing conceptual design, scope of work, project schedules, and status reports. When appropriate, conducts project design review and/or status meetings for sponsoring departments and management.
• Develop a detailed understanding of Plant Automation systems including Rockwell Allen Bradley PLCs (Compact Logix, Control Logix, etc.) , Panel View, Wonderware ArchestrA & Intouch, Wonderware Historian, SQL database, EtherNet/IP , FTAC, Power Flex VFDs & any other control systems installed at site.
• Provide necessary training to Engineers and Technicians as required.
• Ensure latest backups and crash recovery procedures are updated and tested to recover any Programmable Electronic System (PLCs, HMIs , SCADA, VFDs, Controllers etc) in case of a crash / failure.
• Maintain the as built plant automation system architecture, list of all automation assets (PLCs, HMIs, VFDs) & passwords.
• Through the change control process ensure that changes carried out on the Automation Systems do not compromise the safety, environmental or quality stance of the plant.
• Review Validation documentation (FAT, IQ/OQ etc.). Assist with qualification and validation activities as required.
• Manage the site Calibration Program as per Global Calibration standard guidelines. Ensure that calibration master list is aligned with all stake holders, kept updated for any new projects and calibrations completed in time
• Work closely with the Global Automation Manager to deliver compliance with Global Automation Standards including asset inventory and life cycle management of OT assets.
• Other Ad Hoc duties

Pre-requisites:

• Engineering degree or equivalent with minimum 5 years of industrial automation experience preferably in operations / manufacturing environment, with proven track record of delivery of high impact technology solutions & managing manufacturing automation systems.
• Experience with Allen-Bradley (Rockwell) ControlLogix PLCs , PanelView HMI & Powerflex VFDs ; Wonderware InTouch , Historian & Archestra would be preferred.
• In depth knowledge of Ethernet and other network based I/O systems preferred.
• Knowledge of machine safety requirements & ATEX preferred.
• Demonstrated success in project management and leadership of cross-functional teams.
• Experience of working with SAP for Calibrations and spares management would be a plus.
• Strong written and verbal communication and computer skills required.
• Demonstrated history of positive interpersonal skills showing courtesy, tact, and understanding in interactions with co-workers.
• Ability to work on own initiative, self-motivated.
• Sound communication and stake holder management skills.

We regret that only shortlisted candidate will be notified.

• Establish new and maintaining existing relationships with customers.
• Manage and interpret customer requirements and calculate quotations for clients.
• Perform pre-sales technical assistance and product education.

Requirements:

• Diploma in Electronic, Mechanical/Mechatronics Engineering
• At least 2 years of sales experience in cleanroom environment/semiconductor industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Handle technical and engineering problems
• Well experienced with Precast yard operation, precast methods/process
• Responsible & ensure smooth implementation and monitoring of work at site
• Gather, check site date, recording and monitoring of site work progress/ productivity
• Propose alternative work method or other ways to increase productivity
• Ensure all workers at site comply with quality, environment, health & safety requirements
• Ensure all relevant permit are applied before work commence.
• Settle disputes & address clarifications on site
• Any other duties that may be assigned.

Requirements:

• Bachelor Degree in Engineering (Civil) or equivalent.
• At least 10 Year(s) of working experience in the Civil projects (infrastructure/ road/ bridge) is required for this position
• Ability to work independently, handle multiple tasks, work under pressure and deliver assignments on time;
• Well experienced in Segmental Bridge construction
• Must be able to do Method Preparation for all type of Bridge Projects
• Launching Gantry Assembly and Erection of Segment experience is a must.
• Excellent written and verbal communication skills;
• Team player with excellent communication, coordination and personal interaction skills;

Location: Jurong East

Job Description:

• Gain a thorough understanding of technical product specifications and keep up with market trends and company update.
• Schedule sales visits to existing customers and meeting new prospect to expand sales territories.
• Simplifying technical terms during product demonstrations and post-sales customer support.
• Preparing proposals, quotes, and tenders in accordance with client requests.
• Supporting other members of the sales team by training them in the uses of products/services.

Job Requirement:

• Good communication skill
• With electronic, electrical and mechatronics engineering background preferred
• Welcoming entry level with passionate in automation industry
• Outspoken character and keen to talk with customers

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

EUC Engineer (Fixed shift)

Brief Description:

End-User Support, strong in supporting all windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Experienced in troubleshooting both desktop/laptop hardware and software.
• Single point of contact for end-users to log incident and service requests via email and hotline.
• Support user queries or issues are captured and validated for further processing.
• Coordinate with different support teams (including vendor coordination) to ensure issues are resolved with proper resolution recorded.
• Adhere to the SOP and Policy defined.
• Responsible for Call logging, Assignment, Incident Management & Coordination, Call Tracking and follow‐up until closure within the agreed SLA.
• Implementing best practices to reduce time and increase efficiency.
• Incident ownership, monitoring, tracking and communication with all parties.
• Focus on First Call resolution to ensure early closure of tickets.
• Day-to-day onsite IT support for hardware and software issues involving end-user desktops/notebooks, client’s network connectivity
• Install applications/software and apply updates/patches to desktops, notebooks and other end-user computing devices
• Preparation of desktop/notebook system image
• User account management (Account creation, deletion, modification, and reset password in accordance with Customer's process and procedures)
• Perform file backup, migration and restoration for end-users' desktops/notebooks

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)

Salary: SGD2,800 to SGD4,000

Location: Jurong, Suntec, East Coast, Punggol

Working Hours: Fixed shift
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)

Commencement: Immediate

You are our digital circuits professional. You will work with the technical team to design and implement high-performance digital circuits on FPGA or ASIC and be responsible for the entire FPGA build flow from RTL code to verification and timing closure. You are also expected to bring-up, test and verify the final hardware product, together with the product team.

Responsibilities

• Design and implementation of high-performance digital circuits on FPGA or ASIC
• Prepare microarchitecture design based on system specifications and architecture documentation
• Follow through the entire FPGA build flow to perform the various front-end tasks such as RTL coding, synthesis, test and verification and timing closure
• Work closely with hardware design engineers to define I/O interfaces for FPGA and ASIC hardware systems
• Work closely with software design engineers to define register mappings for SoC systems
• Perform quality coverage-driven verification of the design using UVM or other equivalent methodology
• Prepare design documents and test plans
• Work closely as a team to perform bring-up, test and verification on final hardware product

Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Altera, Xilinx or Lattice
• Strong proficiency and interest in digital circuit design
• Proficient in at least one RTL language such as VHDL or Verilog
• Familiar with FPGA build flow from design entry to synthesis, place and route, timing constraints and timing closure
• Familiar with development, integration or testing of high-speed data interfaces such as Ethernet, PCIe or USB
• Hands-on experience in FPGA debugging tools such as Vivado ILA and Quartus SignalTap
• Good problem solving and failure analysis skills
• Experience in board bring-up and hardware troubleshooting
• Familiar with programming languages like C/C++ and scripting languages like Python/Tcl
• Familiarity with or keen interest in learning ASIC related front-end tasks such as synthesis, timing analysis and logic equivalence check
• Familiar with or keen interest in learning development of UVM test-benches to perform functional simulations on module/system level RTL designs
• Familiar with SoC hardware development
• Singaporeans only

Will you be part of the extraordinary?

NCS’s mission is to bring people together and harness technology to advance communities. As a leading technology services firm, operating across Asia Pacific in over 20 cities, our diverse 12,000-strong workforce delivers large-scale, mission-critical projects for governments and enterprises locally and regionally. Our NEXT capabilities of digital, cloud, platforms as well as our core offerings in Applications, Infrastructure, Engineering, and Cyber Security provide end-to-end technology solutions and services to our clients.

Your role is only the beginning

At NCS, we pride ourselves on empowering our people and talent to their fullest potential. Learning together in our NCS DOJO, we have comprehensive, built-in training and industry standard qualifications that will allow you to up-skill and re-skill as we grow together.

Our Ignite Work-Study Diploma Programme will enable you to kickstart your career and gain valuable hands-on experience while attaining a nationally recognised Diploma.

As a Software Support Engineer, you will gain valuable hands-on experience in the following domain:

• Automate and enhance business and technical processes to increase productivity seamlessly based on RPA (Robotic Process Automation)
• Participate in discussions with stakeholders to understand business and technical requirements
• Perform end user support – client management
• Perform first-level troubleshooting for client platform related problems and escalate to next level support team if necessary
• Respond promptly to incident, create incident tickets, investigate & provide temporary/permanent resolution of incidents escalated
• Provide timely status updates, reports on SLA, and ticket aging to relevant parties
• Track/monitor tickets for potential SLA breaches, escalate for attention to prevent SLA misses
• Analyse and recommend ways to reduce incident tickets as part of continuous improvement spirit

What should you have:

• ITE Certificate in Computer Science or related IT/Engineering fields
• ITE Graduate with less than two years of relevant working experience
• Positive attitude, eagerness to learn, good team player and highly collaborative

Job Description:

Duties and Responsibilities

· acting as the main technical adviser on a construction site for subcontractors, crafts people and operatives.

· setting out, leveling and surveying the site;

· checking plans, drawings and quantities for accuracy of calculations;

· ensuring that all materials use and work performed are as per specifications;

· overseeing the selection and requisition of materials and plant;

· agreeing a price for materials, and making cost-effective solutions and proposals for the intended project;

· managing, monitoring and interpreting the contract design documents supplied by the client or architect;

· liaising with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project;

· liaising with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;

· liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress;

· day-to-day management of the site, including supervising and monitoring the site labor force and the work of any subcontractors;

· planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines;

· overseeing quality control and health and safety matters on site;

· preparing reports as required;

· resolving any unexpected technical difficulties and other problems that may arise.

Education / Experience:

o Degree in Computer Science, Computer Engineering, Information Technology

o Min 1 -3 years of relevant experience

Job Description:

o Implement, Maintain and administer network, OS, Storage and backup

o Collaborate system development tasks to include design, implementation, integration

and testing

o Provide on call, 24x7 supports for systems on a rotating basis. Implement corrective

procedures to resolve production problems and minimize unplanned system outages.

o Create and maintain programmatic and technical documentation to ensure efficient

planning and execution

o Coordinate with external parties and customers for problem resolutions

Skill Sets:

o Knowledge of IT Infrastructure such as OS, network, storage and backup

o Passionate in new Technology and keen to pick up new skillsets

o Good team player and ability to work independently

o Able to manage Stakeholders

o Candidates with one or more of the following skillsets will have an advantage:

o OS Skill in:

 Window servers( AD, DNS, Clustering)

 Linux (Redhat, Centos)

 Cluster

 Satellite

 Scripting

 Virtualization (VMware/HyperV/OVM/KVM)

o Scripting Skill in:

 Linux Bash

 Linux Python

 Red Hat Ansible

 Windows Powershell

Summary:

Designs, develops, modifies, and evaluates integrated circuits (ICs) for a battery powered consumer appliances.

Description:

Responsibilities and Duties include but not limited to:

• Implementing the solutions including schematic capture, simulation and layout verification & supervision using commercially available analog design tools.
• Verify the implementation both at the block level and top level.
• Verifying & characterizing the circuit on the bench.
• Candidate will be working on power management IC system including buck, boost, buck-boost, charge pump & LDO. Working knowledge of DC/DC converter will be advantageous.
• Candidate is also required to work with test & product engineering team to develop test program or to support product engineering.

Requirements:

• Strong foundation in analog integrated circuit design
• Bachelor or Master’s degree in Electrical/Electronic engineering
• Strong written and verbal communication skill
• A team player that can work independently using commercially available analog design tools

Bukit Batok-Singapore

Working Day: 5 Days (Mon-Fri)

Working Hour: 8.30 am - 6 pm

Job requirement

• Degree or Diploma in Civil Engineering/ Material Science
• Good knowledge of concrete
• Have experience in facade inspection and concrete technology

Job Scope

• Work closely with Technical Director, Project Manager in managing the projects in relation to Civil Engineering field in structural investigation.
• Perform inspection and structural investigation work
• Preparation of reports for submission
• Assist in laboratory testing
• Work closely with lab staff, clients and representatives of SAC to ensure proper handling of equipment and procedure in compliance with the requirement of ISO 17025
• Responsible for testing of construction materials at the lab and performing tests and interpretation of results and reports.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Responsibilities:

• Scrutinize projects’ contract documents
• Coordinate with engineers from Design Department on shop drawing production
• Prepare budget for projects
• Prepare monthly progress claims together with Contract Department
• Attend site meetings
• Liaise with client’s representative and engineers to ensure smooth progress of work on site
• Work closely with site supervisors and foremen on the deployment of workers on-site
• Control wastages and productivity on-site
• Prepare monthly Site Activity Reports
• Prepare method statements and attend to site’s technical problems
• Observe and inculcate safety awareness among site personnel and workers
• You will also be trained in Headquarter’s Design Department and/or Technical Supports Department subject to the exigency of duties in the Operations Department
• Ensure compliance with Company’s IMS process and procedures
• Ensure OSH risk assessments and EMS impact & aspect register are conducted and implemented in company operations
• To be assigned to Oversea Projects when opportunities arise
• Any other duties to be assigned to you from time to time

Pre-requisites:

• Excellent oral and written communication skills in English language
• Outgoing personality and service-driven with a positive and “can-do” attitude
• Proactive and self-motivated in problem-solving
• Ability to read and interpret drawings
• Strong time management and project management skills
• Proficient in the use of AUTOCAD software
• Willing to travel or station overseas for projects

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

To be responsible for fulfilling NBAP/P2P service requests from our customers; including working together with the support from internal and external teams to resolve provisioning issues as part of a member of Service Provisioning Department.

Requirements :

• Monitor end-to-end tracking of orders to ensure timely and accurate updates of works
• progress.
• Provide timely, accurate and quality of works progress updates to Requesting Licensees.
• To go on-site if needed to conduct survey or requested by Requesting Licensees to resolve
• site issues.
• Liaise with Requesting Licensees/Contractor/ internal stake holder on NBAP projects or
• work orders.
• Ensuring the submission of WAH documentation from contractor and assess them
• Accordingly.
• Inspecting of sites to ensure contractor follow operational procedures.
• Perform other duties as assigned by supervisors.

Requirements :

• Diploma in Engineering or with at least 2 years of relevant experience
• Possess excellent project management and communications skills.
• A good team player and quick learning, goal oriented individual.

Responsible for developing and maintaining strong interpersonal relationships with customer representatives, ensuring Customer Satisfaction, and maintaining all equipment models specific to Molecular Imaging and Radiopharmacy (Cyclotron & Synthesizers).

GE Healthcare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.

Essential Responsibilities:

• Maintain all equipment models specific to Molecular Imaging and Radiopharmacy (Cyclotron & Synthesizers)..
• Perform total system level troubleshooting on complex multi-symptoms problems.
• Maintain daily interface with doctors and technicians on equipment status issues, to ensure satisfaction of primary customers.
• Responsible for Warranty and Preventive Maintenance Service contract cost control.
• Complete all administration tasks on time (e.g., ensure timely completion of Field Modification Instructions and Preventive Maintenance Service inspections documentation for assigned accounts).
• Assist in Account Sales visits, to train Field Engineers where necessary, and identify Sales opportunities and communicate them to account team.
• Assist in the growth and direction of business in geographic area.
• Share best practices during weekly team meetings.
• Maintain effective quality systems and programs compliant with ISO 9001 standard, according to the GE Service Quality Policy Statement.

Quality Specific Goals:

• Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position.
• Complete all planned Quality & Compliance training within the defined deadlines.
• Identify and report any customer quality or compliance concerns immediately to the Quality Organization.
• Identify and report any personal quality or compliance concerns immediately to the Quality Organization.
• Ensure timely dispatch closure.
• Ensure completion of all field modifications instructions (FMI) within prescribed timeframe.
• Participate in continuous improvement activities by identifying and appropriately escalating process and product quality gaps, providing solutions when possible.

Qualifications/Requirements:

• Degree level in Engineering or equivalent.
• Technical and analytical skills, with more than 5 years of Molecular Imaging and Radiopharmaceuticals Services experience in Healthcare Industry is required.
• Comprehensive knowledge of Molecular Imaging and Radiopharmaceuticals is a must
• Ability to work independently with minimum supervision.
• High work standards and quality.
• Shows initiative and motivation.
• Plans and organizes work effectively.
• Sought by others for guidance and advice.
• Strong customer skills and deals tactfully and effectively with differences of opinion (e.g. influences rather than directs).

Inclusion and Diversity

GE HealthCare is an Equal Opportunity Employer where inclusion matters. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership – always with unyielding integrity.

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Purpose of the job:

Develop ways to extend the product life cycle and develop growth opportunities and share best practices to drive cost performance and efficiencies

Key accountabilities:

• Support/leads the Projects/Programs Engineering team to ensure that the correct technical governance is being applied (e.g. suitable design and expert input, defining and enforcing architecture/métier standards, methodologies, processes, tools and solution frameworks against which programs and projects can deliver) – focusing inwardly on the internal consistency; and outwardly on its coherence with other solutions/métiers and standards.
• Review the technical input and subject matter expertise of the proposed design, covering areas such as the definition of requirements compliance, functional fit, technological capability, cost, and delivery capability
• Assess the feasibility of the proposed solution (performance, delivery model and organizational fit), and propose mitigation plans
• Engages with projects/programs to ensure technical risks are being identified and managed
• Chair/Support Design Reviews for subject matter in his/her field of critical developments and projects
• Ensure the implementation of generic products and systems by multi-project synergies in order to optimize cost of technical solutions.
• Propose/Support technical innovation and roadmap development as required in answer to the business strategy of his/her field, with a constant preoccupation to make optimization on the company portfolio and internal processes.
• Maintain view of industry and standards, and domain technical watch to guide orientation with market trends.
• Provide pre-tendering support regarding business opportunities where expected solution does not exist in current portfolio.
• To lead/assist tenders to ensure consistency between the tender development needs and the programs development roadmap
• Owns and develops the processes and procedures through which the regional services organizations undertake engineering activities.
• Drives best practice in the regional services organizations, ensuring standard solutions and architectures are developed, which maximize reuse and minimize rework.
• Ensure a harmonized approach to resolving obsolescence and safety issues, ensuring issues are identified on all affected fleets and common resolutions are applied.
• Identify opportunities to maximize the use of best cost engineering resource in delivering both global and regional engineering initiatives.
• Set the competence requirements for global and regional services activities and ensure that competence is assessed.
• Identify opportunities for fleet upgrades, modifications and improvements, defining standard solutions and architectures and then providing the technical governance and leadership to realize these opportunities in the regional services organizations.
• Chair/support user groups and global community calls to identify multi-project synergies, resolve issues and spread best practice
• To provide engineering leadership and governance for services projects, where the necessary competence and experience is not available.

Performance measurements:

OTD, QCD, PMC, Project reliability / availability / cost targets

Educational Requirements:

University degree in Railway Engineering, Electronics, Computer Science, Automation Engineering or Electrical and Mechanical Engineering

Competencies:

Mandatory:

• 1-5 years of experience in Railways system/Application engineering for Engineer
• Knowledge of rolling stock equipment
• Graduated from a STEM university-type course
• Member of an appropriate Engineering Institution

Desirable:

• Knowledge of rolling stock maintenance
• Certification in System Engineering
• Experience
• Working knowledge of safety management systems and safety risk assessment
• Proficient in the use of MS Office, SAP, BI/BO

Competencies & Skills

• Problem solving capacity (technical and costs evaluation of a solution)
• Capacity of managing Technical risks
• Self-motivated
• Attention to detail
• Ability to work independently
• Desire to learn
• Effective, professional interpersonal skills
• Strong team player

• Plan and execute project work schedule to meet the project goals and datelines with different sector clients such as government, commercial and private.
• Prepare, update and present project work progression report in the meeting with the customer.
• Conduct system configuration setup, troubleshooting and commissioning for the ELV equipment such as CCTV system, door access card and intrusion detection system.
• Provide CCTV installation and design advise to the client during site survey.
• Manage and coordinate the contractor and stakeholders to ensure smooth implementation according to the project schedule.
• Negotiate the quotation with contractor before raising up the quotation for approval by management.
• Prepare and update the project documentation such as user manual, floor plan drawing and schematic drawing.
• Provide training to the clients and end users on the system features and operation.
• Provide technical support to the maintenance team after the commissioning.
• Maintain positive relationships with clients, address concerns and ensure clients are satisfied with the delivered solutions.

Requirements:

• Bachelor’s degree in Electronics Engineering or related field.
• With 6 or more years working experience in the Security Industry.
• Prior experience in handling at least 5 or more engineers.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• 4+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.
• Design, implementation, and maintenance of network security solutions, ensuring the stability, reliability, and security of the network environment.

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule