RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Singapore Based (Woodlands Industrial Park / Site Office)

5.5 Days work per week (Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm)

Salary: $3,000 to $6,000 depending on experience

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering + Experience in chiller system

Career Progression Opportunities

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Situated in the heart of Singapore's Central Business District, Rakuten Asia Pte. Ltd. is Rakuten's Asia Regional headquarters. Established in August 2012 as part of Rakuten's global expansion strategy, Rakuten Asia comprises various businesses that provide essential value-added services to Rakuten's global ecosystem. Through advertisement product development, product strategy, and data management, among others, Rakuten Asia is strengthening Rakuten Group's core competencies to take the lead in an increasingly digitalized world.

Rakuten Group, Inc. is a global leader in internet services that empower individuals, communities, businesses, and society. Founded in Tokyo in 1997 as an online marketplace, Rakuten has expanded to offer services in e-commerce, fintech, digital content, and communications to approximately 1.7 billion members around the world. The Rakuten Group has nearly 32,000 employees and operations in 30 countries and regions. For more information visit https://global.rakuten.com/corp/

Department overview

Search Department focuses on Search, Discovery, and Navigation experience for users of Rakuten. We design, develop, and deploy high performance, fault-tolerant distributed systems used by millions of Rakuten customers every day. We strive to deliver the most innovative solutions that are helpful to people and societies around the world.

Why we hire

We are looking for a backend software engineer to work on next generation AI native experience. In this role, you will be at the forefront of development, and implementation of cutting-edge techniques for LLM solutions including prompt engineering, model fine-tuning, evaluation, and inference capabilities.

Position Details

• Explore and implement the most recent technologies and approaches for AI native user experience and build innovative products on top of LLM platform.
• Work closely with cross-functional teams to implement projects harnessing LLMs for diverse purposes and vertical domains.
• Design and develop a high-performance platform capable of handling and processing large volumes of requests efficiently.

Qualification

• BS degree in Computer Science, Computer Engineering, or other relevant majors with minimum 3-5 years of experience
• Extensive experience in programming, included but not limited to, the following programming languages: Java, Golang and C++
• Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale distributed system
• Good team communication and collaboration skills.
• Strong execution skills and have a problem-solving mindset.

Preferred Qualifications

• Maintain a deep passion for contributing to the success of LLM is essential in this innovative and fast-paced team environment.
• Experience in serving Deep Learning models on framework TensorFlow, PyTorch, XGBoost etc.
• Familiar with LLM’s and supporting tools such as LangChain (Optional)

Rakuten is an equal opportunities employer and welcomes applications regardless of sex, marital status, ethnic origin, sexual orientation, religious belief or age.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

The Role:

This position involves the preparation of technical specifications, construction drawings, and design documents for instrumentation and control systems in process and industrial plants. The role requires coordinating with multiple teams to ensure project delivery within established schedules and budget constraints.

Key Responsibilities:

• Lead the design efforts for field instrumentation and control systems, including the preparation and review of design documents.
• Manage small to medium-sized projects, ensuring adherence to allocated man-hours, costs, and timelines.
• Draft and review specifications, technical bid evaluations (TBE), and vendor documentation for instrumentation, analyzers, and control systems (DCS, ESD, F&G).
• Develop construction-related drawings, such as IO lists, location layouts, hook-up diagrams, and cable routing plans.
• Select and evaluate appropriate instruments for process control and monitoring applications.
• Estimate billable man-hours (BMBQ) and contribute to technical proposal development for tenders.
• Compile monthly project reports, participate in client meetings, and ensure alignment with project milestones.
• Collaborate with project teams and oversee the daily task assignments for team members.
• Perform factory acceptance testing (FAT), site acceptance testing (SAT), loop checks, and provide support during commissioning.
• Support field activities during construction, pre-commissioning, and commissioning phases.

The Requirements:

• Bachelor’s degree in Chemical Engineering, Electrical Engineering, or Instrument and Control Engineering.
• At least 15 years of experience in instrument and control system design, with a strong foundation in field instrumentation engineering and control systems such as DCS, ESD, and F&G.
• Hands-on experience with construction support, including FAT, SAT, and loop checks.
• Proficiency in the development of construction drawings and project documentation.
• Strong communication skills and ability to work effectively across teams.

Interested applicants are encouraged to submit their detailed resumes.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Our client is a global provider of intelligent automation and integrated security management solutions.

• Assist the project team with documentation, report drafting, and coordinating project tasks.
• Participate in the system design, technical development, and implementation phases.

Requirements:

• ITE in Electrical or equivalent
• Minimum 3 years of experience in Security System Installation.
• Good understanding in computer, network, security, ELV and electrical system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Technical Sales Engineer
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6,500 + Commission + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with the sales team to achieve or exceed a minimum monthly sales target of $100,000, using a three-month average for fluctuation adjustments.
• Assist in servicing customers by conceptualizing machine processes and drafting proposals and quotations.
• Support the Project Manager in capacity planning to ensure project timelines are met, using a Master Project Schedule.
• Monitor projects to ensure goods are delivered on time.
• Engage in new business development initiatives across various industries.
• Manage public relations activities, including liaison with overseas partners and customers.

APPLY NOW!!!

• Diploma or higher in any discipline.
• Minimum of 3 years of experience in Manufacturing Automation Machines.
• Proficiency in CAD software and common Microsoft software is essential.
• Willingness to travel frequently as required.
• Possession of a Class 3 driving license is an advantage.
• Owning a vehicle is preferred, with car allowances provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67301 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

What the role is

The company is a dynamic and forward-thinking organization dedicated to empowering individuals and shaping the future of Singapore's workforce. As a statutory board under the Ministry of Education, the company leads the charge in driving the SkillsFuture movement, a national initiative that promotes lifelong learning and skills development. With a strong focus on innovation and collaboration, the company works closely with employers, training providers, and individuals to create a vibrant ecosystem of learning and growth. By offering a wide range of initiatives, programs, and funding schemes, the company enables individuals to unlock their full potential, acquire new competencies, and stay ahead in a rapidly changing job market.

Join the Data Strategy & Analytics Division (DSAD) team to grow Company into a data-mature organization where we use data pervasively and securely to deliver on our business missions:

• Develop and drive Company’s data strategy, including LOIs, data competency, and maintaining strong links with CIO Office
• Develop, implement, and maintain a comprehensive data governance and management framework that complies with WOG requirements
• Implement Lines of Inquiries
• Support data management and exploitation
• Develop MLOps and instill best practices

What you will be working on

As an AI Engineer within DSAD, you will play a pivotal role in developing and enhancing our AI-driven platforms. Your expertise in machine learning, AI, and GenAI applications will contribute significantly to our mission of leveraging advanced technologies to drive innovation and operational excellence. We are looking for a candidate who embodies our core values of integrity, collaboration, and continuous improvement, and who is passionate about harnessing the power of AI to achieve our strategic objectives.

AI and Machine Learning Development

• Develop and enhance machine learning models and AI solutions, focusing on generative and discriminative AI applications
• Test, deploy, and maintain scalable and reliable AI systems
• Implement MLOps principles for efficient integration of machine learning models with data pipelines and infrastructure

Collaboration and Integration

• Work closely with data scientists and engineers to integrate AI into broader system architectures
• Facilitate knowledge sharing and technical training sessions to boost organizational AI competency
• Integrate AI models and systems with APIs and external systems for seamless data and functionality flow

Innovation and Continuous Improvement

• Stay abreast of AI trends to suggest improvements to existing systems and workflows
• Participate in the entire AI model lifecycle management, from data analysis and model building to integration and deployment
• Advocate for continuous improvement in AI practices and applications, aligning with our mission of leveraging advanced technologies

Location:

Near Paya Lebar MRT

Salary:

$5100 to $7500

What we are looking for

• Tertiary qualifications in computer science, statistics, applied mathematics, data management, information systems, information science, or a related quantitative field
• A minimum of three years of experience in AI and machine learning disciplines, including model development, deployment, and lifecycle management
• At least two years of experience in cross-functional team collaboration and supporting AI/GenAI initiatives.
• Proficiency in Python; familiarity with R is a plus
• Strong knowledge of AI frameworks such as TensorFlow, PyTorch, and scikit-learn
• Familiarity with AWS SageMaker, feature stores, model registry, and AWS cloud architecture
• Proficiency in SQL and containerization technologies like Docker and Kubernetes
• Excellent problem-solving skills, strong interpersonal skills, and the ability to work in a team environment
• Confident, energetic self-starter with a commitment to ethics, regulatory compliance, customer service, and business integrity
• Highly adaptable and committed to excellence in a dynamic business environment
• Demonstrated ability to work creatively and collaboratively with both business and IT teams
• Passionate about staying updated on AI advancements and advocating for continuous improvement in AI practices and applications

Candidates without the required qualification but possess the relevant work experience are welcome to apply.

Successful candidates will be offered a 2-year contract.

Reg No: 96C4864

EA License No: R22110839

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all works comply fully with regulatory and client's requirements.
• Work closely with Professional Engineers, regulatory authorities and contractors to provide planning, design and supervision leadership not only to solve site problems, but also to ensure timely completion of the projects.
• Responsible for implementing and sustaining the site supervision quality & safety assurance system.
• Carry out supervision of structural & geotechnical works by identifying any non-conformity of contractor's works on site.
• Understand drawings & contract documents in carrying out the works.
• Implement the site supervision quality and safety assurance system.
• Carry out regular site checks on contractor & ensure compliance with health and work safety in accordance with MOM regulation.
• Attend site progress and technical meetings with the project team and Client to resolve site and technical issues.
• Ensure that proper site documentation for ongoing works, site meetings, safety records, method statements, shop drawings, as built submissions etc., are well managed.

Requirements:

• Possess relevant Civil/Structural Engineering degree from a recognized University and is a registered Resident Engineer with IES.
• Minimum 5 years of Resident Engineer experience in supervision of residential/institutional development with strong knowledge of bored piling, precast structures, structural steel and local construction practices.
• Auto Cad and BIM knowledge preferred.
• Good supervisory and leadership skills.
• Possess effective communication skills and able to interact with people at all levels.

- Experience in ELV system such as Audio/Video; CCTV and security and surveillance system.

- Door Access system installation & troubling-shooting

- Alarm system installation & troubling-shooting

- Electrical Power installation & trouble-shooting

- Cable Cat6 and Fiber installation & troubling-shooting

- Fiber optic cable splicing and Testing

- ELV device installation, configuration and troubling-shooting

- Supervise a team of technician

- More than 8-ears experience in related fields

Requirements:

1. A degree in civil engineering from recognized universities and from the professional engineer’s board is required.
2. Minimum of 3-5 years of experience in large sclae building projects.
3. Proficient in project construction management.
4. Experience in building civil projects with the main contractor in construction projects.
5. Shall be well versed in different levels of government agencies and construction regulations.

Job Description:

1. Responsible for planning, scheduling, conducting, and coordinating the technical and management aspects of the projects.
2. Monitoring of site activities, material requisition, cost control, project supervision, and schedule of works.
3. Assist and support the project manager in handling and monitoring the progress of the project.
4. Responsible for awarding delivery orders and preparing contract-related documents.
5. Responsible for preparing and issuing subcontractor inquiries and the assessment of quotations upon receipt.
6. Maintain contract documentation and provide advice on pre-tender and post-contract matters.
7. Responsible for handling cost engineering functions involving budget preparation, cost control, forecasting, and cost reporting.

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

(a) Install, assemble, test, or troubleshooting of CCTV / solar photovoltaic (PV) systems / electrical wiring/cabling installation/ electronic circuit on the roof or other structure in compliance with site assessment and schematics.

(b) Perform other ad-hoc or general work as assigned by the Management.

(c) Engage in supply work activities when required (separate assignment on ad-hoc basis).

(d) Assist in planning manpower for work activities.

(e) Contribute to workflow improvement, planning and schedule sctivaties.

(f) Ensure proper housekeeping f spare parts, equipment and tools.

(g) Oversee the work of contractors to ensure safety requipment and operating standards are met.

(h) Perform on the jon coaching of team members.

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a Configuration Engineer to join us in Singapore!

Duties and Responsibilities:

• Review and ensure NOC and S.O configurations accuracy.
• Creating and submitting Engineering Changes through Agile.
• Maintain sales order BOM & initiate ECO change management.
• Coordinate the ECOs/MCOs/DEVs/ECRs/SRD process internally. Flawless execution on tracking the implementation of ECO/ECN/ECR/SRD.
• Submitting Problem Report/ Supplier Problem Sheet to customer for BOM related issues (engineering-related issues).
• Ensuring all affected parts and BOMs are included in the CR/IR/PR or corrected via the Engineering Change Order (ECO) process.
• Understand the scope of the engineering change downstream.
• Responsible for setting up, manage and revise all the customers' product information, i.e. BOMs, part numbers and AVLs to have proper control on assembly revision.
• Streamline the BOM structure setup with Product Engineer for assembly sequence control, traceability data collection and material back flush accuracy.
• Work with Product Engineer to restructure customer BOM to work with UCT manufacturability.
• Validate and ensure all customer document packages such as Assembly DWG, Fabrication DWG, Procedure & Test and Manufacturing Instruction available and upload to Agile system.
• Work closely with internal/external customers to resolve any configuration issues.
• Generate list of new parts/new revision parts that needs sourcing info to the quote team for pre-determined NPI projects.
• Lead department improvement projects ie: RPA, QMS BKM, Global Training Videos.
• Ability to guide and provide technical supervision and technical support and guidance to other engineers.
• Attend audits ie: customer’s , internal and third party certification audits.
• Other tasks and responsibilities as assigned by manager.
• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without.

Knowledge, Skills and Experience:

• Proficiency with MS suite, and ADOBE Acrobat. Advanced Excel knowledge, and design experience is a plus.
• Knowledge with engineering documentation and document control procedures.
• Able to read technical drawing and mechanical BOM.
• Basic understanding of Industrial Equipment manufacturing.

Educational/Certification Requirements:

• Degree in Engineering with a minimum of 6-8 years of related experience.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, a,ge, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.