RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Situated in the heart of Singapore's Central Business District, Rakuten Asia Pte. Ltd. is Rakuten's Asia Regional headquarters. Established in August 2012 as part of Rakuten's global expansion strategy, Rakuten Asia comprises various businesses that provide essential value-added services to Rakuten's global ecosystem. Through advertisement product development, product strategy, and data management, among others, Rakuten Asia is strengthening Rakuten Group's core competencies to take the lead in an increasingly digitalized world.

Rakuten Group, Inc. is a global leader in internet services that empower individuals, communities, businesses, and society. Founded in Tokyo in 1997 as an online marketplace, Rakuten has expanded to offer services in e-commerce, fintech, digital content, and communications to approximately 1.7 billion members around the world. The Rakuten Group has nearly 32,000 employees and operations in 30 countries and regions. For more information visit https://global.rakuten.com/corp/

Department overview

Search Department focuses on Search, Discovery, and Navigation experience for users of Rakuten. We design, develop, and deploy high performance, fault-tolerant distributed systems used by millions of Rakuten customers every day. We strive to deliver the most innovative solutions that are helpful to people and societies around the world.

Why we hire

We are looking for a backend software engineer to work on next generation AI native experience. In this role, you will be at the forefront of development, and implementation of cutting-edge techniques for LLM solutions including prompt engineering, model fine-tuning, evaluation, and inference capabilities.

Position Details

• Explore and implement the most recent technologies and approaches for AI native user experience and build innovative products on top of LLM platform.
• Work closely with cross-functional teams to implement projects harnessing LLMs for diverse purposes and vertical domains.
• Design and develop a high-performance platform capable of handling and processing large volumes of requests efficiently.

Qualification

• BS degree in Computer Science, Computer Engineering, or other relevant majors with minimum 3-5 years of experience
• Extensive experience in programming, included but not limited to, the following programming languages: Java, Golang and C++
• Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale distributed system
• Good team communication and collaboration skills.
• Strong execution skills and have a problem-solving mindset.

Preferred Qualifications

• Maintain a deep passion for contributing to the success of LLM is essential in this innovative and fast-paced team environment.
• Experience in serving Deep Learning models on framework TensorFlow, PyTorch, XGBoost etc.
• Familiar with LLM’s and supporting tools such as LangChain (Optional)

Rakuten is an equal opportunities employer and welcomes applications regardless of sex, marital status, ethnic origin, sexual orientation, religious belief or age.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

The Role:

This position involves the preparation of technical specifications, construction drawings, and design documents for instrumentation and control systems in process and industrial plants. The role requires coordinating with multiple teams to ensure project delivery within established schedules and budget constraints.

Key Responsibilities:

• Lead the design efforts for field instrumentation and control systems, including the preparation and review of design documents.
• Manage small to medium-sized projects, ensuring adherence to allocated man-hours, costs, and timelines.
• Draft and review specifications, technical bid evaluations (TBE), and vendor documentation for instrumentation, analyzers, and control systems (DCS, ESD, F&G).
• Develop construction-related drawings, such as IO lists, location layouts, hook-up diagrams, and cable routing plans.
• Select and evaluate appropriate instruments for process control and monitoring applications.
• Estimate billable man-hours (BMBQ) and contribute to technical proposal development for tenders.
• Compile monthly project reports, participate in client meetings, and ensure alignment with project milestones.
• Collaborate with project teams and oversee the daily task assignments for team members.
• Perform factory acceptance testing (FAT), site acceptance testing (SAT), loop checks, and provide support during commissioning.
• Support field activities during construction, pre-commissioning, and commissioning phases.

The Requirements:

• Bachelor’s degree in Chemical Engineering, Electrical Engineering, or Instrument and Control Engineering.
• At least 15 years of experience in instrument and control system design, with a strong foundation in field instrumentation engineering and control systems such as DCS, ESD, and F&G.
• Hands-on experience with construction support, including FAT, SAT, and loop checks.
• Proficiency in the development of construction drawings and project documentation.
• Strong communication skills and ability to work effectively across teams.

Interested applicants are encouraged to submit their detailed resumes.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Our client is a global provider of intelligent automation and integrated security management solutions.

• Assist the project team with documentation, report drafting, and coordinating project tasks.
• Participate in the system design, technical development, and implementation phases.

Requirements:

• ITE in Electrical or equivalent
• Minimum 3 years of experience in Security System Installation.
• Good understanding in computer, network, security, ELV and electrical system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Singapore Based (Woodlands Industrial Park / Site Office)

5.5 Days work per week (Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm)

Salary: $3,000 to $6,000 depending on experience

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering + Experience in chiller system

Career Progression Opportunities

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Technical Sales Engineer
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6,500 + Commission + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with the sales team to achieve or exceed a minimum monthly sales target of $100,000, using a three-month average for fluctuation adjustments.
• Assist in servicing customers by conceptualizing machine processes and drafting proposals and quotations.
• Support the Project Manager in capacity planning to ensure project timelines are met, using a Master Project Schedule.
• Monitor projects to ensure goods are delivered on time.
• Engage in new business development initiatives across various industries.
• Manage public relations activities, including liaison with overseas partners and customers.

APPLY NOW!!!

• Diploma or higher in any discipline.
• Minimum of 3 years of experience in Manufacturing Automation Machines.
• Proficiency in CAD software and common Microsoft software is essential.
• Willingness to travel frequently as required.
• Possession of a Class 3 driving license is an advantage.
• Owning a vehicle is preferred, with car allowances provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67301 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary

To provide SAP Basis support for a local Chinese restaurant. He/She will be

• responsible for the day-to-day operations of the SAP systems.
• system configuration, administration, monitoring, and troubleshooting of the environment.
• He/She will need to provide technical support and leadership for SAP systems, which can include implementing patches, overseeing upgrades, establishing processes for monitoring performance, system configuration, design, and application support.

Job Description

• Ensuring 24/7 SAP system availability.
• Responsible for Managing User/Client Administration, Authorization Management, System Performance Management, Audit Management, Transport Management System, Background Job, Patches installation, System Backup & Recovery, Kernel Upgrade, OS & Database Maintenance for Jumbo Group wide.
• Responsible for managing and conducting SAP Business Continuity Planning, Disaster Recovery.
• Ensure Optimum server performance and Preventive maintenance to keep daily operation smooth.
• Manage SAP daily support ticket within defined Service Level.
• Custodian for SAP System Architecture, Hardware, and integration landscape.
• Manage and liaise with third party vendor.
• Deliver all IT projects on time.
• Any other ad-hoc duties as assigned by the Manager from time to time.

Job Requirements

• Degree in Computer Science , Information Systems, Engineering, or equivalent
• Knowledge in Basis Administration is a must
• 1 to 2 years of relevant SAP Basis experience
• Basic knowledge on SAP HANA and Netweaver technology
• Interested in processes within software development landscapes
• Prior experience in S4/Hana would be advantageous
• Analytical, meticulous and have good sense in troubleshooting
• Ability to articulate and communicate with people of all levels in the organization
• Able to work independently and lead in projects
• Linux, SAP S4/Hana environment

As a Field Service Engineer, you will have responsibility for installation, service, and maintenance of Gauge Tank Level Gauging Systems on sailing ships/vessels and in shipyards, as well as offer in-house technical support and remote service to customers and colleagues around the world. One of the key offering is the fiscal K-Gauge Custody Transfer System (CTS), which is a critical system in LNG and LPG carrier operations.

Key Responsibilities:

• Installation & commissioning of K-Gauge tank level monitoring systems
• Service & maintenance of K-Gauge systems onboard vessels both locally and globally
• In-office technical support and remote services to global colleagues and customers

Requirements:

• Typically diploma or degree in one or more of the following: electronics, instrumentation, automation, mechatronic or telecommunication. Relevant experience may compensate for lack of education
• Field experience from maritime, shipping and/or offshore oil & gas installations is an advantage
• Good oral and written communication skills in English
• Highly motivated for worldwide support activities (travelling is required)
• Able to work at Toh Guan

Role:

Fire Protection Engineer (Building Construction)

• Singapore Based (Working location: Labrador area)
• 5.5 Days work per week (Mon- Fri 8.30am-5.30pm; Sat 8.30am – 12.30pm)
• $3500-$5500
• Diploma / Degree in Mechanical Engineering/Building Services + 5 years of relevant experience
• Experience in Water Mist system and/or foam system is added advantage
• Career Progression Opportunities

Job scope

To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples

To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples

Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)

Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions

Manage and execute project as per the schedule

To attend meeting with contractors to address issues and update progress

Study and reviewing of drawings, specifications for compliance

Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

Plan and lead testing and commissioning of the fire protection systems.

Follow up with site / authority inspections, defects rectifications of the fire protection work.

Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

Follow up with maintenance of fire protection systems during DLP

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Responsibilities:

• Design and programming of PLCs.
• Knowledge in troubleshooting
• Testing and commissioning of food and beverage equipment and machinery, as well as chemical industrials.

Requirements:

• Must have Degree or diploma on Electrical engineering.
• A minimum of three years' experience in design, troubleshooting, and instrumentation is required.
• A solid understanding of PLC programming is required.
• Open for 5.5 Working Days
• This position will be for 1 year contract with possibility of converting to permanent staff.

For interested applicants, kindly send your resume in Word/PDF format including the following:

1.Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Job Responsibilities

• Configuring and administering Redundant Array of Independent Disks (RAID) storage and associated components, Storage Area Network (SAN) including fibre channel switch administration, data restore and disaster recovery and data backup for clients and servers.
• Maintaining storage aspects of new server integrations, storage allocations and change management.
• Performing setup procedures to consolidate storage of data from different platforms (i.e. Windows, UNIX and LINUX).
• Troubleshooting and fixing storage issues and also performing routine equipment check and preventative maintenance.
• Performing storage analysis, capacity planning and performance planning of storage components.
• Documenting the policies and procedures to support the operational storage environment and participating in the design and ongoing refinement of procedures and policies.
• Preparing reports on storage administration best practices, new technologies, etc. and recommending enhancements and configuration changes to improve and optimize storage.

Technical Requirements

• Min. 5+ years’ experience and good knowledge in Avamar Backup Solution, EMC VNX series
• Relevant certification in Storage administration is an added advantage

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

Gelangre Reyanelle Gelario | REG No : R1870995

PERSOLKELLY SINGAPORE PTE LTD | EA License No : 01C4394

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.