General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

Responsibilities:

1. Engage in firmware/software development for communication systems, positioning systems, bioradar systems, and related products.

2. Engage in V-model development, which includes requirement analysis, high-level design, low-level design, implementation, unit testing, integration testing, and system testing.

Requirements (Firmware):

1. Bachelor’s degree or above, majoring in computer engineering, electronic engineering, communication, automation, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management and low-level driver development. Capabilities to build the toolchain with Python would be advantageous.

3. Experience with embedded operating systems such as RTOS would be appreciated. Knowledge of pre-emption, IRQ, and embedded communication protocols such as I2C, UART, and SPI is mandatory.

4. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

5. Preferred experience includes ARM Cortex-M series hosted microcontrollers. Candidates with solid experience in ESP32, Raspberry Pi, Arduino, STM32, or similar platforms will have an advantage.

6. Competency in using debugging equipment such as oscilloscopes, logic analysers, and FW debuggers is mandatory.

Requirements (Software):

1. Bachelor’s degree or above, majoring in computing, software engineering, computer science, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management (static, stack, heap) and GUI. Candidates with hands-on experience in creating Windows based application with IMGUI will have an advantage. Capabilities to build the toolchain with Python would be mandatory.

3. Candidates with experience in building applications that facilitate TCP/IP, UDP, etc., will have an added advantage. Knowledge and proficiency in data structures management are essential, including sorting algorithms, linked lists, stacks, queues, trees, and hash tables.

4. Knowledge or hands-on experience with multithreading concepts such as IPC, MUTEX, Time Slicing, and Pre-emption will provide a significant advantage.

5. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

6. Experience with software pipeline automation tools such as Jenkins is appreciated.

Supporting project communication Systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.

• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation
• Network Knowledge / Servers Knowledge

Job Summary

We are looking for an experienced Senior Cloud Engineer to lead our cloud strategy, architect high-availability solutions, and ensure the reliability and scalability of our cloud infrastructure. This role requires extensive cloud expertise, a strong understanding of automation, and the ability to guide junior engineers.

Key Responsibilities

• Architect, implement, and maintain complex cloud infrastructures that support large-scale applications.
• Lead efforts to optimize and secure cloud environments, ensuring cost-effectiveness and compliance.
• Automate cloud deployment pipelines using IaC and DevOps best practices.
• Monitor, troubleshoot, and optimize performance across cloud environments.
• Provide mentorship to junior team members and ensure best practices in cloud architecture.
• Collaborate with cross-functional teams to design solutions that meet business needs.

Qualifications

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• 5+ years of experience as a Cloud Engineer or in a similar role.
• Expertise in cloud platforms (AWS, Azure, Google Cloud) and related services.
• Advanced knowledge of IaC tools (e.g., Terraform, CloudFormation) and automation practices.
• Proficiency in scripting and automation with Python, Bash, or PowerShell.
• Strong understanding of networking, security, and compliance in cloud environments.

Preferred Skills

• Experience with container orchestration tools like Kubernetes and Docker.
• Familiarity with CI/CD pipelines and DevOps tools (e.g., Jenkins, GitLab CI).
• Strong analytical and problem-solving skills, with a focus on scalability and resilience.

Job duties:

• Dealing with commissioning of complete UPS and rectifier systems including batteries from Lead acid.
• Testing newly built UPS and rectifiers according to client specification and requirements and conducts Factory Acceptance Test.
• Carrying out contract maintenance and inspection on a plan base on manufacturers’ recommendations.
• With all planning of maintenance service administration undertaken within suitable instructions.
• Submitting required reports to service administration in a timely manner following all site activities.
• Ensuring team efforts are met and exceeded performance targets and reliability goals including being prepared to travel overseas on business trip within short notice and work irregular hours at times to meet ad-hoc job assignments.
• Providing comprehensive facility, critical environment management and technical services to the client, with a focus on continuous improvement.
• Ensuring all safety procedures, including Crisis Management/ Business Continuity and Emergency Procedures are maintained at all times to ensure that service delivery teams and on-site contractors undergo a Health and Safety Induction prior to deployment.

Multinational corporation

Salary up to $5000 + Various Benefits & Allowances

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

Job Summary

As a DevOps Engineer, you will play a crucial role in streamlining our software development and deployment processes. Your responsibilities will include implementing cloud computing solutions, establishing continuous integration and deployment (CI/CD) pipelines, and developing automation scripts for various aspects of our software lifecycle. You'll collaborate with team members to enhance engineering tools and procedures, conduct system security scans, and liaise with third-party vendors to manage technical issues. Your expertise in cloud platforms, DevOps tools, and system administration will be essential in maintaining and improving our technical infrastructure, ensuring efficient and secure software delivery.

Key Responsibilities

• Apply cloud (AWS, Azure, GCP) computing skills to deploy upgrades and fixes.

• Put in place continuous integration (CI) and continuous deployment (CD) process and tools to enable the agile team to deliver quality software based on user feedback.

• Develop scripts to automate build, software release, application deployment and system and application management.

• Collaborate with team members to improve the company’s engineering tools, systems and procedures, and data security.

• Conduct automated system level vulnerability security scan, harden system and application platform.

• Liaise with 3rd party software and hardware vendors to manage and resolve incidents and technical issues.

• Liaise with 3rd party hosting providers to manage and resolve incidents and technical issues.

• Prepare and maintain technical documentation.

What we are looking for

• Past track records in Solaris UNIX/Linux/Windows Systems Administration.

• Expert in code deployment tools (Puppet, Ansible, and Chef).

• Exhibit expertise in software development methodologies.

• Knowledge in setting up DevOps tools such as Git, Jenkins, Bamboo, Docker, Kubernetes, Puppet and Ansible.

• Past track records in virtualisation /container technology and setting up continuous integration / continuous deployment process and tools.

• Knowledge in application development and setting up of middleware.

• Understand networking protocols and services, e.g. SFTP, DHCP, DNS, VLANs, routing will be an added advantage.

• Knowledge in setting up and maintaining databases will be added advantage.

Responsibilities:

l Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

l Conduct root cause analysis & implement pro-active measures

l Responsible for supporting operational systems satisfying contractual Service Level Agreement

l Perform and manage routine preventive maintenance and operational activities promptly and effectively

l Perform troubleshooting and fault rectification

l Provide up-to-date project documentation and reports

l Diagnose and rectify technical issues

l Perform standby duties if required

Requirements:

l Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

l Strong troubleshooting skills and analytical mind with problem-solving aptitude

l Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

l Pro-active, dynamic and with good analytical/conceptual thinking

l Able to work independently as well as in a team and good interpersonal skills

l Good Working knowledge with VPN, firewall appliances would be an advantage

l Good working knowledge with routers, switches would be an advantage

l Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

l Experience in hardening of OS, system and network equipment

l Experience in Patch Management

l Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline;

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. BE well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Responsibilities

• Perform Level 2 Systems Administration in system monitoring, management, disaster recovery and capacity planning.
• Assist in performing on-prem and cloud system management in Microsoft, AIX, Virtual (VMWare or Hyper-V), Azure and Microsoft 365 cloud infrastructure such as Entra ID, Exchange Online, SharePoint, Teams, etc.
• Participate in the design, system set-up and configuration, implementation and deployment of new server and Azure Cloud Technologies.
• Plan and manage IT resources for tasks or projects including budgeting and capacity planning.
• Update technical documentation pertaining to systems administration for on-premise system, Azure and Microsoft 365 cloud infrastructure.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Any other ad-hoc duties as assigned

Requirements

• Degree / Diploma in Computer Science, Information Technology or equivalent
• Experience in system support and server administration including implementing and managing Azure cloud infrastructure with strong understanding of Azure cloud technologies
• Hands-on experience on administrating Windows Server, Exchange, VMWare vSphere and Hyper-V on premise,
• Hands-on experience on administrating Microsoft 365 cloud technologies such as Exchange Online, Entra ID, SharePoint Online, Microsoft Defender and Microsoft Intune.
• Hand-on experience with implementing and configuring Azure cloud technologies such as virtual machines, application services, load balancer, SQL Managed Instance, site to site VPN, storage solutions, network, security, logging and monitoring.
• Knowledge on AIX/ Unix and other IBM products. (IBM WebSphere MQ, WebSphere, Tivoli Storage Manager Backup) will be an advantage

Interested applicants, please Email , and look for

Jensen Fang Lifa

[email protected]

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Job Summary

We are looking for an experienced Senior Cloud Engineer to lead our cloud strategy, architect high-availability solutions, and ensure the reliability and scalability of our cloud infrastructure. This role requires extensive cloud expertise, a strong understanding of automation, and the ability to guide junior engineers.

Key Responsibilities

• Architect, implement, and maintain complex cloud infrastructures that support large-scale applications.
• Lead efforts to optimize and secure cloud environments, ensuring cost-effectiveness and compliance.
• Automate cloud deployment pipelines using IaC and DevOps best practices.
• Monitor, troubleshoot, and optimize performance across cloud environments.
• Provide mentorship to junior team members and ensure best practices in cloud architecture.
• Collaborate with cross-functional teams to design solutions that meet business needs.

Qualifications

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• 5+ years of experience as a Cloud Engineer or in a similar role.
• Expertise in cloud platforms (AWS, Azure, Google Cloud) and related services.
• Advanced knowledge of IaC tools (e.g., Terraform, CloudFormation) and automation practices.
• Proficiency in scripting and automation with Python, Bash, or PowerShell.
• Strong understanding of networking, security, and compliance in cloud environments.

Preferred Skills

• Experience with container orchestration tools like Kubernetes and Docker.
• Familiarity with CI/CD pipelines and DevOps tools (e.g., Jenkins, GitLab CI).
• Strong analytical and problem-solving skills, with a focus on scalability and resilience.

Job Description

• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Supervise and coordinate site installation works by contractors.
• Attend site coordinate meetings with main-con, consultants and contractor.
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan.
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation.
• Arrange and attend material, equipment, installation, and testing inspection.
• Carry out testing and commissioning, combined services testing for TOP/CSC,
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects.

Requirements

• Min Diploma in Building M&E Service (ACMV, FP, P&S, BMS, Ele and ELV) , Mechanical and Eletrical Engineering
• Min 5 years of experience
• Familiar to Building services (ACMV, FP, P&S, BMS, Ele and ELV) code requirement and basic design and necessary submission for tender bidding and construction, TOP and CSC
• Experiences for coordination with architecture, C&S and process team for M&E Space, maintenance and fire exit routing
• Skilled in design, coordination, and project management
• Experience in tender bidding, with strong analytical and critical thinking abilities
• Interpersonal, communication skills & leadership
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification are highly desirable

Job Description

• Lead, Plan, organize, supervise and liaise closely with operation team on all lifting activities.
• Overall in-charge for preparing lifting and erection plan for all the Crawler or Mobile Cranes.
• Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all executive teams for any lifting activities.
• Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.
• Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure and works are carried out safely.
• Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis.
• Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and project teams.
• Coordinate and interface with Client/ other contractors to harmonize the onsite lifting arrangement.
• Conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• Periodically monitor and implement any procedural changes according to the local authority / client’s requirement & regulation updates.
• Periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.

Requirements

• Degree in Civil Engineering or any related Engineering
• Minimum of five (5) years site experience and has attended MOM or Institute of Engineers Singapore conducted Appointed Person - Lifting Operations course to oversee the activities of the various lifting operation on site
• Able to communicate well (spoken and written).
• Possess a willing to learn and proactive attitude.

• 10+ years of experience supporting network and network security environments in a mission-critical environment.

• Experience on any Proxy and Zscaler (ZIA) implementation experience is an added advantage.

• Ability to work in a fast-paced, high pressure, constantly changing environment.

• Experience in managing and driving complex global and regional projects with multiple functional teams

• Hands on experience with Network security design and operations including expert in routing protocols (BGP, OSPF, EIGRP), Firewalls (Zscaler, Symantec, Palo Alto, Fortinet) and load balancers (F5)

• Experience in security practices and methodologies including SSL/TLS encryption, Sandbox and Advanced threat protections.

• Knowledge and Experience in Authentication concepts of users (SAML, MFA and SSO).

• Certification and/or training with vendor-neutral or vendor-specific focus

• Basic understanding of operating system administration (Windows and Linux)

• Basic scripting and automation experience

• Excellent written and oral communication skills to technical and non-technical staff

• Excellent time management and organization skills

Job Description

● Develop/Support validation activities such as qualification test protocol or documentation

updates.

● Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.

● Support software/hardware modification pertaining to the site Automation systems.

● Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.

● Support field troubleshooting with other internal Stakeholders.

● Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.

● Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.

● Support other technical changes and duties such as On Call/Shift duty as required.

● Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable

Frequency (VFD) commissioning/modification and validation.

Requirements:

● Knowledge/Proficient in Emerson DeltaV System and software OR Rockwell HMI System, software and PLC/HMI/VFD/Devicenet is a must.

● Knowledge of site GMP quality requirement will be a plus.

● Knowledge of Computer System Validation will be a plus.

● Pharmaceutical related experience preferred.

● Minimum 3 years’ experience in relevant technical experience or as per project requirement.

● Must be team player, self-starter, curious with strong analytical and organizational skills.

Duration : 06 months. Option to extend/convert subject to performance review.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

As a Production Operations Engineer, you will play a critical role in operationalizing, maintaining, scaling, and optimizing our AI-driven applications and supporting infrastructure. With a blend of software development and infrastructure skills, you will work closely with cross-functional teams including software engineers, data scientists, and platform engineers, to ensure the delivery and operation of highly available, low latency, and optimally performing AIproducts.

Your expertise will be crucial in developing solutions, automating processes, monitoring system health, troubleshooting, and managing incidents to ensure our products deliver a seamless experience for our clients.

Key Responsibilities:

• Software Development and Operations:Collaborate with Software Engineers to design, implement, and maintain scalable, efficient, and secure systems using React, Python, Docker, and Kubernetes stack.
  Optimize application performance by profiling and tuning frontend and backend services for speed, scalability, and resilience.
  
• System Monitoring & Maintenance:Monitor production systems and services, ensuring optimal uptime and performance.
  Implement monitoring tools and dashboards for proactive incident detection.
  
• Infrastructure Automation:Automate repetitive tasks, deployment processes, and infrastructure provisioning using tools such as Ansible, Terraform, or similar.
  Develop and maintain CI/CD pipelines to facilitate smooth deployments.
  
• Incident Management & Troubleshooting:Respond to system incidents, troubleshoot issues, and work towards timely resolutions.
  Conduct root cause analysis (RCA) of system failures and develop strategies to prevent future incidents.
  
• Performance Optimization:Optimize AI model deployment and data pipelines for speed, efficiency, and cost-effectiveness.
  Collaborate with data scientists and engineers to ensure AI systems are running efficiently in production environments.
  
• Scalability & Reliability:Design and implement scalable infrastructure solutions for AI applications.
  Ensure system reliability, fault tolerance, and high availability through effective architecture and best practices.
  
• Security & Compliance:Work with security teams to ensure all systems are compliant with company security protocols and industry standards.
  Implement security best practices across production environments.
  

Required Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent practical experience).
• 5+ years of experience in a combination of software development, production operations, DevOps, infrastructure engineering, or security roles.
• Strong application development experience in Javascript and Python, particularly with RESTful API design and development using a service-oriented architecture.
• Strong experience with cloud platforms (AWS, GCP, or Azure).
• Proficiency in container orchestration technologies (e.g., Kubernetes, Docker).
• Solid understanding of CI/CD pipelines and automation tools (Github Actions, ArgoCD, Jenkins, GitLab CI, etc.).
• Experience with infrastructure as code (Terraform, Ansible, etc.).
• Hands-on experience with monitoring and logging tools (Datadog, Prometheus, Grafana, ELK stack, etc.).
• Strong experience with Bash, and other similar scripting languages.
• Solid understanding of frontend frameworks, particularly React, and their interaction with backend services.
• Strong problem-solving skills and attention to detail.
• Experience in handling large-scale distributed systems.

Preferred Qualifications:

• Proficiency in working with NoSQL databases (MongoDB) and understanding of document-based data models.
• Knowledge of object storage systems and experience with S3-compatible APIs (MinIO) for storing and managing large-scale unstructured data.
• Experience in supporting AI/ML pipelines and production systems.
• Knowledge of data engineering and distributed data systems (e.g., Kafka, Spark, Hadoop).
• Understanding of GPU-based infrastructure for AI workloads.
• Familiarity with security best practices in cloud and AI environments.
• Flexible work environment and culture that promotes work-life balance.

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Title: Senior Infrastructure Engineer

Location: Central

Industry: School

Perm

Description:

• Manage infrastructure, networks, servers, cloud services (Office 365, AWS), security systems (firewalls, IPS), and network services (DHCP, DNS).
• Provide Level 2+ support for IT infrastructure incidents, manage escalations, and ensure service restoration.
• Monitor and proactively resolve infrastructure issues, plan capacity expansions to prevent disruptions.
• Implement IT security measures to safeguard against viruses, malware, and unauthorized access.
• Lead infrastructure projects, including new deployments, upgrades, and service rollouts.
• Maintain up-to-date documentation for infrastructure design and configurations.

Requirements:

• Diploma/Degree in IT or related field.
• 5+ years of IT support experience.
• Strong knowledge in:Microsoft Windows Server, VMware
  Cisco networking (routers, switches), Apple OS, Microsoft Active Directory, Office 365, Google G Suite
• Preferred certifications: ITIL, Microsoft, Cisco, AWS, Azure.
• Hands-on, team player with strong communication skills.

(EA:20C0196)

R22108971

We are seeking a skilled and motivated Service Engineer to join our team, specializing in chiller maintenance and commissioning. The ideal candidate will have hands-on experience in servicing chillers and related HVAC systems, demonstrating strong technical abilities, excellent problem-solving skills, strong communication skills and a commitment to delivering outstanding customer service.

Chiller Maintenance & Chiller Commissioning Work

· Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.

· Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.

· Diagnose mechanical, electrical, and control system issues and implement effective solutions.

· Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.

· Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.

· Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.

· Collaborate with MHI agent, customer and contractors to verify system performance and compliance with specifications.

· Foster a collaborative working relationship with contractors, encouraging teamwork and shared problem-solving.

· Work closely with the contractor to share knowledge, improve processes, and enhance overall service delivery.

· Adhere to safety protocols and regulations while performing service tasks to ensure a safe working environment.

· Conduct safety briefings and ensure all parties understand their responsibilities regarding safety.

· May involve working in various environmental conditions, including outdoor settings.

· Field-based role with travel to client sites.

· Available to respond to chiller breakdown calls during assigned standby shifts.

Requirements

· Diploma and Bachelor’s Degree in Engineering

· Proven experience in chiller maintenance, commissioning, or related HVAC roles (3-5 year).

· Strong technical knowledge of chiller systems, HVAC principles, and

· electrical controls.

· Excellent problem-solving skills and attention to detail.

· Strong communication and interpersonal skills to interact effectively with clients and team members.

· · Ability to work independently and manage time efficiently.

· Building Construction Supervisors Safety Courses.

Working Location: Harbourfront Tower One (Must be able to travel to subsidiary offices in Singapore.)

Working Hours: Mon - Fri, 9am to 5:30pm

Responsibilities :

As a Network Administrator Cloud Architect, to: (Primary)

1) Manage and implement network projects
2) Perform Administrative tasks

• Maintain asset (hardware/software) inventory
• Annual renewal maintenance

3) Support daily operations

• Manage and Administer the regional network
• Network monitoring
• Managing and maintain the data center server room
• Troubleshoot any network related issues

4) Others Support

• Support and Administer Azure Cloud infrastructure
• Vendor management
• Attend Global/Regional Security meetings.

As a System Administrator Cloud Architect, to: (Secondary)

1) Manage and implement projects
2) Perform Administrative tasks

• Maintain asset (hardware/software) inventory
• Annual renewal maintenance

3) Support daily operations

• Manage and Administer Windows and Linux OS
• Managed and Administer VMWare
• Manage Azure Cloud infrastructure
• Setup, configure and manager server hardware
• Administer Microsoft AD and group policy
• Monitoring server perform and availability
• Monitoring daily backups and perform restore
• Maintaining software and Security updates
• Managing and maintain the data center server room
• Troubleshoot any server, Windows related issues

Required Skill Sets:

• Knowledge on various version of Windows or Linux OS
• Knowledge on Windows Active Directory and Group Policies
• Knowledge in managing Server Room Operations
• Certified in Azure Cloud Administration
• Cisco Certified Network Associate (CCNA)
• Knowledge on different type for Server hardware
• Knowledge in troubleshooting server related issues
• Knowledge on LAN/WAN network
• Knowledge on new SDWAN
• Knowledge in managing Data Center Operations
• Knowledge in troubleshooting network related issue
• Vendor Management

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• LOH YI YUAN • REG Number R23117757

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy. Personal Data Protection Policy (PDPA) | NTUC's e2i

View e2i's personal data protection policy and third-party compliance measures. Reach out to us for any further inquiries or clarification you may need.

Job description

• Must have relevant experience in Building Management System (BMS).
• Have strong knowledge in designing a system for BMS system.
• Able to manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission of documentation and supervision.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for the assigned projects.
• As and when to take on new assignments.

Key Requirements

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.
• Knowledge of PLC programming (preferably Siemens PLC)
• Experience in SCADA software and strong knowledge of Industrial Control and Building Management System.
• Prefer relevant working experience; prefer with LTA ECS/LCS, TVS project experience.
• Prefer with IEC 61508 and LTA documentation submission.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.