Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Key Responsibilities:

• Assist in the operation, maintenance, and troubleshooting of Building Management Systems (BMS) and Energy Management Systems (EMS).
• Understand and apply HVAC, Building Automation, and Energy Management systems to meet project specifications and ensure optimal system performance.
• Diagnose, troubleshoot, and resolve software and hardware issues in installed BMS and EMS systems.
• Analyze and resolve communication problems with control devices and other system components.
• Perform software preventive maintenance on installed BMS and EMS equipment to ensure system longevity and reliability.
• Support system commissioning and testing processes to verify that systems function as intended.
• Assist in system upgrades, ensuring compatibility with existing infrastructure and adherence to project timelines.

Key Requirements:

• Basic knowledge of HVAC systems, Building Automation, Energy Management, or related control systems.
• Familiarity with communication protocols such as BACnet, MODBUS, and LON.
• Strong troubleshooting skills for diagnosing and resolving system issues.
• Ability to work independently and as part of a team in a fast-paced environment.
• Good communication skills, both written and verbal.
• Proficiency in using software tools and diagnostic equipment for system maintenance and troubleshooting.
• Ability to learn new technologies and protocols quickly.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities

ByteDance will be prioritizing applicants who have a current right to work in Singapore, and do not require ByteDance sponsorship of a visa.

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok and Helo as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve. Join us.

About the team

The ByteDance Large Model Team is committed to developing the most advanced AI large model technology in the industry, becoming a world-class research team, and contributing to technological and social development. The Large Model Team has a long-term vision and determination in the field of AI, with research directions covering NLP, CV, speech, and other areas. Relying on the abundant data and computing resources of the platform, the team has continued to invest in relevant fields and has launched its own general large model, providing multi-modal capabilities.

The Machine Learning (ML) System sub-team combines system engineering and the art of machine learning to develop and maintain massively distributed ML training and inference system/services around the world, providing high-performance, highly reliable, scalable systems for LLM/AIGC/AGI.

In our team, you'll have the opportunity to build the large scale heterogeneous system integrating with GPU/NPU/RDMA/Storage and keep it running steadily and reliably, enrich your expertise in coding, performance analysis and distributed system, and be involved in the decision-making process. You'll also be part of a global team with members from the United States, China and Singapore working collaboratively towards unified project direction.

Responsibilities

- Responsible for ensuring our ML systems are operating and running efficiently for large model deployment, training, evaluation, and inference

- Responsible for the stability of offline tasks/services in multi-data center, multi-region, and multi-cloud scenarios

- Responsible for resource management and planning, cost and budget, including computing and storage resources

- Responsible for global system disaster recovery, cluster machine governance, stability of business services, resource utilisation improvement and operation efficiency improvement

- Build software tools, products and systems to monitor and manage the mL infrastructure and services efficiently

- Be part of the global team roster that ensures system and business on-call support

Qualifications

Minimum Qualifications

- Bachelor's degree or above, majoring in Computer Science, computer engineering or related fields;

- Strong proficiency in at least one programming languages such as Go/Python/Shell in Linux environment;

- Strong hands-on experience with Kubernetes and containers skills, and have more than 1 year of relevant operation and maintenance experience;

Preferred Qualifications

- Engage in the operation and maintenance of large-scale ML distributed system;

- Experience in operation and maintenance of GPU servers

- Possess excellent logical analysis ability, able to reasonably abstract and split business logic, a strong sense of responsibility, good learning ability, communication ability, self-driven and good team spirit;

- Have good documentation principles and habits to be able to write and update workflow and technical documentation as required on time.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Marine Service Engineer

Location at Tuas, Work on site (sea)

5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary Open for Discussion + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• Minimum 4 years of relevant experience in Diffusion process development.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development.

• Basic from $3,000 - $4,000 + Variable Bonus
• Monday – Friday, 9am – 6pm
• Location: Bendemeer

Responsibilities

• Achieve sales targets to drive revenue growth.
• Provide technical sales support, including budget preparation, quotations, and technical specifications.
• Resolve issues on-site to ensure project success.
• Develop detailed product specifications for contractors, architects, and consultants.

Requirements

• Min. ITE in Mechanical/Environmental Engineering or 1-year similar sales experience.
• Proficiency in reading CAD drawings.
• Possess a class 3 driving license and a vehicle will be an added advantage.
• Bilingual in MANDARIN and ENGLISH to liaise with Mandarin-speaking clients.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Project Engineer (Oil & Gas / Petroleum / Chemical)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Acting as the principal technical liaison among the project team, customers, subcontractors, and the company.
• Reviewing project specifications and related documents.
• Ensuring the implementation of good engineering standards and practices.
• Focusing on understanding and solving customer technical problems to improve satisfaction.
• Maximizing project profitability through appropriate material buyout and engineering approaches.
• Developing and completing major engineering deliverables according to the Vendor Document Schedule.
• Managing design, analysis, and drafting to meet technical and schedule requirements.
• Handling quality control, including maintenance of non-conformance reports (NCRs) and specification waivers.
• Coordinating with the Document Controller to ensure adherence to technical and document control processes.
• Interfacing with the Project Manager for engineering deliverables and resources.
• Preparing material requisition specifications and conducting goods receipt inspections.
• Supervising fabrication/installation work and assisting with internal testing and FAT.
• Preparing final and As-built documentation, as well as Operation & Maintenance Manuals and Manufacturer Data Records.
• Promoting and developing solution capabilities and application knowledge to support current and future projects.

APPLY NOW!!!

• Min. Diploma in Instrument/Electrical/Chemical Engineering or equivalent
• Min. 2 years of relevant working experience in a similar industry
• Knowledge of Oil & Gas, Petroleum, or Chemical Industries would be preferred
• Familiar with Microsoft Office with knowledge of AutoCAD will be an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is a global manufacturer. Due to business needs, they are now recruiting a Customer Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility of Customer Quality Engineer:

• Analyze and apply customer quality specifications, developing and upholding internal quality benchmarks through APQP methodologies (e.g., Process Flow Diagram, Control Plan).
• Facilitate Built-in Quality workshops, ensuring collaboration with cross-functional teams to achieve and monitor continuous improvements through to completion.
• Lead initiatives to resolve quality issues for new programs (such as Process of Record, Process Change Request, First Time Quality) to enhance performance.
• Chair Material Review Board meetings to address deviations and spearhead corrective actions for non-conformance cases.
• Obtain customer approval for Production Parts and provide support for the initial stages of production.
• Promptly address customer returns by utilizing Six Sigma problem-solving techniques and the 8D approach.
• Capture and document lessons learned for each new program and apply these insights to future projects.
• Ensure adherence to the Quality Operating System throughout product launches.

Requirements:

• Min Degree in Engineering related field
• Minimum 3 experience in Quality and Product Launch
• Knowledge in Automotive industry regulations and standards

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• SG Top 10 Logistics MNC
• Basic $3850 - $5000
• AWS + Variable Bonus
• 5 days (8am-7.45pm)
• Location: Changi South
• Walking distance from Expo mrt
• Straits Times' Singapore Best Employers 2024

Responsibilities:

• Understand program dynamics and explore cross-unit business opportunities.
• Develop and implement strategies to improve operational performance and evaluate their effectiveness.
• Drive continuous improvement projects (CIPs) focusing on workplace safety, automation, process optimization, and productivity gains.
• Engage with customers through improvement projects, operational excellence meetings, and initiatives.
• Promote and sustain LEAN practices such as 6S and root cause analysis to enhance efficiency and eliminate waste.
• Manage multiple improvement projects simultaneously while meeting deadlines.

Requirements:

• Degree holder with a contract logistics background preferred; Six Sigma Black Belt is a plus.
• Expertise in problem-solving, data analytics, and continuous improvement practices like LEAN, 6S, and Kaizen.
• Proficient in project management, meeting deadlines, and managing diverse expectations.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Leads a team of REs, RTOs, QS and document controller and provide direction for field engineering for system-wide MEICA works which include Odour Control & Air Jumper Facilities and Site-Wide Instrumentation Monitoring for DTSS2.
• Site supervision and commissioning of the system-wide MEICA works including coordination and interface with the DTSS2 contractors and PUB.
• Supports the Project Director, Deputy Project Director and Construction Manager in leading a team of technical professionals to deliver construction and programme management services.
• Ensures the Contractor provides consistent quality of works in accordance with approved drawings and contract specifications.
• Resolves construction and commissioning-related issues raised by Client/Contractors.
• Monitors and reports on Contractor’s work progress, schedule and cost performance and safety records.
• Responsible for the review and approval of Contractor submissions which include but not limited to reports, RFI, claims, specification, calculations and drawings.
• Ensures consistent and thorough submittal reviews of the Contractors’ submission have been done throughout the submittal approval process.
• Chairs meetings, lead discussions with Clients and Contractors and prepare meeting notes.
• Assesses and checks on RE’s and RTOs’ certification on the value of work completed, recommend progress payments to be made to Contractor, and monitors the Contractor’s cash flow projection.
• Resolves contractual issues (which include variations and EOT claims) with the Contractor and recommend to the Client for approval.
• Ensures that records of all works including but not limited to tests, inspections, and minutes of meetings are filed in the DTSS2 Project Information Management System.
• Maintains a high profile in HSES by active participation in HSES audits, inspections and reviews.
• Promotes a near-miss reporting culture and ensure lessons learnt from these near-misses are shared across the programme.

Requirements

• Minimum Degree in Mechanical/Electrical engineering or equivalent
• RE registration accredited with the Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore is preferred
• About 10-15 years of relevant experience in Odour/Wastewater/Conveyance Systems and familiar with the associated MEICA works.
• Experience in managing and administering engineering work in multiple disciplines and multiple contract environment
• Broad working knowledge of all engineering disciplines.
• Conversant with PSSCOC, local building codes, M&E Codes of Practices and regulations
• Good supervisory and management skills
• Strong letter and report writing ability

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve. Join us.

About the team

The ByteDance Large Model Team is committed to developing the most advanced AI large model technology in the industry, becoming a world-class research team, and contributing to technological and social development. The Large Model Team has a long-term vision and determination in the field of AI, with research directions covering NLP, CV, speech, and other areas. Relying on the abundant data and computing resources of the platform, the team has continued to invest in relevant fields and has launched its own general large model, providing multi-modal capabilities.

The Machine Learning (ML) System sub-team combines system engineering and the art of machine learning to develop and maintain massively distributed ML training and inference system/services around the world, providing high-performance, highly reliable, scalable systems for LLM/AIGC/AGI.

As a vital AI infrastructure for the company, our machine learning system integrates our most up-to-date R&D results in AI algorithms and systems. Come and join us, you will get the chance of building large-scale machine learning systems, and working with the best AI system and algorithm researchers and engineers.

We are looking for talented individuals to join us in 2025. As a graduate, you will get unparalleled opportunities for you to kickstart your career, pursue bold ideas and explore limitless growth opportunities. Co-create a future driven by your inspiration with ByteDance.

Candidates can apply to a maximum of two positions and will be considered for jobs in the order you apply. The application limit is applicable to ByteDance and its affiliates' jobs globally. Applications will be reviewed on a rolling basis - we encourage you to apply early.

Responsibilities:

- Architect and develop efficient, highly scalable and secured services for machine learning system

- Optimise backend systems and services for machine learning system, computational efficiency and scalability;

- Analyse business and technical requirements carefully to solve challenging problems

- Participate in design reviews and code reviews

- Collaborate with fellow engineers, product managers, and business owners in the team to ensure timely delivery of business requirements

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

Qualifications

Minimum Qualifications:

- Final year or recent graduate with a background in Computer Science, Computer Engineering or related fields;

- Strong software programming capabilities, exhibits good code design and coding style;

- Familiarity with at least one of the programming languages: Go, Python, Java or C++;

- Pragmatic understanding of data structure, algorithm design and analysis, networking, data security, distributed system, and highly scalable systems design.

Preferred Qualifications:

- Agile, quick self learner, highly self-motivated with a strong sense of product ownership and creative problem solver.

- Deeply passionate about software coding/development and building distributed system.

- Good collaborator and team player, comfortable working in a fast moving, culturally diverse and globally distributed team environment.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

By submitting an application for this role, you accept and agree to our global applicant privacy policy, which may be accessed here: https://jobs.bytedance.com/en/legal/privacy.

If you have any questions, please reach out to us at [email protected].

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: Project Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage internal teams, including AV Designer, Drafter, Engineer, Site Engineer, and Safety Officer.
• Coordinate with external stakeholders such as Consultants, Main Contractors, Subcontractors, Manufacturers, and Suppliers to ensure successful project delivery.
• Study and analyze schematic designs and construction drawings to create accurate AV construction drawings.
• Oversee project schedules, budgets, and change orders, and manage the Bill of Material (BOM).
• Ensure customer satisfaction by managing their expectations and delivering a positive customer experience.
• Plan, manage, and allocate necessary resources to ensure project timelines and goals are met.
• Other additional tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 2 years of experience in project management for construction sites or A&A works (preferably related to M&E or ELV solutions such as CCTV or structured cabling).
• With Audio Visual technical knowledge or project management experience is a plus.
• Ability to interpret construction drawings.
• Able to work independently in a fast-paced environment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: AV Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with different parties to deliver high-quality audio-visual and video conferencing solutions, ensuring they adhere to company standards and best practices and fulfill customer requirements.
• Configure, test, and commission professional audio solutions for different venues and corporate meeting rooms, integrating them with other audio-visual and video conferencing systems.
• Provide end-user training, guiding users on how to effectively operate and utilize the implemented solutions.
• Work closely with in-house AV Designers and Engineers, as well as manufacturers such as EV, BOSE, Martin Audio, Samsung, Logitech, etc. to implement fully integrated AV solutions for spaces such as lecture halls, meeting rooms, command centres, auditoriums, and ballrooms.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in IT/ Engineering/ Audio Visual.
• At least 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solutions.
• Good skills and knowledge of DSP programming.
• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok and Helo as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About the Team

The Seed Foundation Machine Learning (ML) Systems team provides end-to-end (E2E) machine learning experience and machine learning resources for the company. The team builds heterogeneous ML training and inference systems based on GPU and AI chips and advances the state-of-the-art of ML systems technology to accelerate models such as stable diffusion and LLM.

The team is also responsible for research and development of hardware acceleration technologies for AI and cloud computing, via technologies such as distributed systems, compilers, HPC, and RDMA networking. The team is reinventing the ML infra for large scale language models. We have published papers at top tier conferences such as SIGCOMM, NSDI, EuroSys, OSDI, SOSP, MLSys, NeurIPS, etc.

Responsibilities:

- Optimizing large scale parallel training for state of the art deep learning algorithms such as large language models, multi-modality models, diffusion, reinforcement learning, etc

- Research and develop our machine learning systems, including accelerated computing architecture, management and monitoring

- Deploy the machine learning systems, distributed machine learning training and inference

- Manage cross-layer optimization of system and AI algorithms and hardware for machine learning (GPU, ASIC)

Qualifications

Minimum Qualification:

- Bachelor or above degree in distributed, parallel computing principles and know the recent advances in computing, storage, networking, and hardware technologies;

- At least 3 years or more working experiences;

- Familiar with machine learning algorithms, platforms and frameworks such as PyTorch and Jax.

- Have basic understanding of how GPU and/or ASIC works;

- Expert in at least one or two programming languages in Linux environment: C/C++, CUDA, Python;

Preferred Qualifications:

The following experiences will be a big plus:

- GPU based high performance computing, RDMA high performance network (MPI, NCCL, ibverbs);

-Distributed training framework optimizations such as DeepSpeed, FSDP, Megatron, GSPMD - AI compiler stacks such as torch.fx, XLA and MLIR;

- Large scale data processing and parallel computing;

- Experiences in designing and operating large scale systems in cloud computing or machine learning;

- Experiences in in-depth CUDA programming and performance tuning (cutlass, triton)

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.