Job Description :

• Design and implement Building Management Systems for commercial, industrial, or residential buildings.
• Analyze project requirements, propose technical solutions, and oversee the implementation of BMS systems.
• Develop and program control logic for to optimize building operations and energy efficiency.
• Troubleshoot and debug control systems to ensure optimal performance and integration.
• Configure and integrate high-level communications for devices, including sensors, controllers, actuators, and field devices.
• Ensure smooth communication between BMS components and external systems.
• Design, develop, and implement user-friendly BMS graphics and dashboards to provide operators with real-time insights into building systems.
• Ensure that graphics are intuitive and provide comprehensive control and monitoring features.
• Implement and maintain SCADA systems for large-scale monitoring and control of building operations.
• Integrate SCADA systems with existing BMS components to provide centralized control.
• Create and maintain detailed design, development, and implementation documents, including system architecture diagrams, control logic, and commissioning reports.
• Ensure that all design and development documents are up-to-date and accurate for future reference.
• Collaborate with other engineers, designers, and stakeholders to deliver high-quality solutions.
• Provide technical support during project implementation and post-installation phases.
• Assist in training building operators on the proper use and maintenance of the BMS system.

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Hands on experience in DDCs and PLCs
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Job Purpose:

Service engineer to carry out preventive and corrective maintenance of machinery, industrial vehicles, heavy machinery and waste collection equipment.

Opportunity to develop as a professional within heavy duty machinery sector through continuous training programmes to ensure the necessary technical and skills.

Main Duties and Responsibilities:

• Preparation of necessary material and stock control
• Diagnosis of breakdowns, either electric, mechanic or hydraulic.
• Interpretation of electrical and hydraulic diagrams to apply correct solutions
• Inspection and repair of electrical, mechanical and hydraulic breakdowns and analyze possible malfunctions of machinery.
• Preparation of needs of materials and stock control

Accountabilities & Commitments Required

• Able to attend breakdowns after office hours and weekends
• Commitment to join a growing company and take full responsibility to be part of a team

Education / Qualifications

• Technical education
• Fluent in English
• Other laguanges

Job-related skills & abilities

• Class 3 driving licence
• Analytical Skills for problem-solving

Other requirements

• Customer Satisfaction, Aftersales, and Customer Service skills
• Previous experience in a similar role in the waste management industry will be a plus point

Purpose of the Role

The Engineer, Inspection has a critical role in ensuring that ARLANXEO's plant equipment is maintained to a high level of reliablity via the proper use of Maintainence and Engineering Standards and Codes. Her/his objective will be to ensure compliance with safety standards, local legislation, statutory requirements and regulations as well as Corporate guidelines while performing related duties and all other related works.

Job Description

• Manage and perform all static equipment inspection (pressured equipment, piping, PSV, etc).
• Manage PVMS to MOM CLA extension scheme and Steam/Air equipment RBI.
• Response to plant requirements to mechanical inspection for static and safety devices, Promptly and timely response to requests for assistance to meet execution team expectations
• Provide technical expertise to identify and make recommendation to solve static equipment problems either directly or through accurate identification of a problem and participating with functional engineering team in problem solving.
• Propose improvements of static equipment installation and utilize the LMS management of Change (MOC) process including proper documentation of the change.
• Lead in Static Equipment inspection scoping in major shutdown and turnaround.
• Support unscheduled/emergency or schedule plant shutdown/turnaround as required.
• Support Go-live, deployment and usage of IDMS and Future RBI initiatives.
• Liaise with maintenance planner, engineers and others supervisors to improve PM schedules.
• Supervise the contractor’s work in the facility or shop to guarantee safety and quality and reliability of work.
• Perform Root Cause Analysis of failures and develop counter measures to prevent future failing of Equipment.
• Develop work procedures in the area of responsibility.

Requirements

• Degree in Mechanical Engineering with at least 5 years’ of maintenance experience in Oil & Gas / Petrochemical or Chemicals industry.
• Industrial Certifications: API510, API570, AWS-CWI.
• Skilled in Materials selection, Material Degradation Mechanisms and NDT
• Working knowledge of API/ASNE/ASTM/TEMA.
• Familiar with PI, Microsoft Office, Project, Outlook and SAP systems.
• Self-confident and able to work independently with minimum supervision but also, a good team player.
• Good interpersonal, analytical, troubleshooting and problem solving skills.

Job Description:

- Design, develop, and improve sheet metal products and engineering processes

- Assist to create and review technical drawings, plans, and specifications using computer software

- Perform detailed documentation to track project development and design process

- Develop testing processes, and perform testing and validation of new designs

- Taking part in idea generation and improvement of existing products and machinery.

- Able to work with team members for the overall progress of the project and able to cope with fast paced learning environment - Prepare and perform unit beta testing and data recording

- Ability to be independent, innovative and creative

Skills and Academic Requirement:

- Bachelor's Degree/Diploma in Mechanical Engineering/Computer Engineering or in related field

- Solid Experience with AutoCAD and Solidworks

- Firm grasp of engineering concepts, and keen in designing mechanical systems and products

- Exceptional technical and problem-solving skills and reasoning ability

- Ability to communicate effectively and clearly

- Must be self-motivated and a great team player

We do not require recruitment agencies, please do not contact us. Thank you!

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

The Global MSAT team will support the Biologics Operations strategy, in particular regarding customer centricity, providing harmonized deployed services and more consistency in execution. It will also support the new technology introduction that we forecast in the coming years, with accelerated timelines. Internally, this team will have a close interface with R&D and Group Operations for early alignment, priority setting, planning and execution of our global improvement agenda. The technical diversity, strong teamwork and cross functional collaboration in a fast paced working environment makes the MSAT roles dynamic, exciting and rewarding, offering excellent personal and professional development within the function and across the Lonza global biologics network

This senior scientific role will be part of a Global MSAT Biologics team and will be responsible for providing technical leadership and know-how directly with cross functional teams across the Lonza Biologics operations network on a day to day basis, supporting Global project implementation to the sites and ensuring all project time lines and objectives are consistently monitored and delivered. The role will focus in areas of strategic material harmonization, new technology introduction, continuous process improvement and cross site process tech transfer, working closely with network site functional teams.

Key responsibilities:

• Responsible to oversee implementation of harmonization projects into the Global network sites, developing deployment plans cross functionally and supporting the on-site teams during all phases of transfer to meet business targets (as required)
• Responsible as a point of contact for support and resolving critical network technical problems (as required), working cross functionally across sites to maintain internal and external customer project outcomes e.g. Global QA Alerts.
• Responsible to provide daily technical coaching and mentoring to members of the Global and site MSAT teams with specific technical problem resolution and improve operational execution. Supports the training and knowledge transfer to improve overall expertise and capability of the Global MSAT network.
• Accountable to maintain and establish a professional internal and external network to maintain technical and compliance knowledge and know how consistent with the role objectives and team development.

Key requirements:

• PhD or equivalent means of demonstrating ability with considerable experience in industry and/or a relevant biologics development or manufacturing environment
• Has demonstrated extensive knowledge in field of expertise either from process development or a cGMP manufacturing operations background and on-the job training, working as either as an individual contributor or in a management supervisory role.
• Recognized Subject Matter Expert (SME) in field of relevance e.g. biologics process development or from working in a cGMP MSAT environment. Ability to technically understand complex non routine unit operations with a proven track record of successful technical transfer expertise.
• Has experience leading implementation / harmonization projects involving cross-functional, multi-site teams.
• Has a deep understanding of manufacturing science and process as a whole and also Lonza’s business practices and customer expectations.
• Experience of material qualification and specification setting is desirable.
• A role model in demonstrated interpersonal skills with ability to work with others in a technical coaching capacity.
• Works well with both internal and external customers in problem resolution. Experience in leading cross functional project activities with ability to multi task, prioritize and be an effective decision maker.
• Proven problem solver has an excellent technical attention to detail, communication skills both written and verbal, interpersonal qualities with a continuous improvement positive mind set.
• Proven experience working with external and/or internal customer peers on technical planning, design and execution of technical scopes of work, showing resilience and tenacity to deliver on time against goals and objectives

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description – Service Engineer (Maintenance Lead)

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager (Reporting Officer (RO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.

· Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to RO for review and final release to customer.

· Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment

· Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance

· Collaborate with OEM to establish root cause of fault findings and D-level components repair

· Supervise sub-contractor performing maintenance at site

· Convey updates to RO and customer on maintenance progress.

· Review with RO on maintenance processes and resources etc for maintenance process improvement.

Requirements

· Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.

· Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to lead and manage a team, and to work independently with minimum supervision.

· Ability to conduct risk assessment and provide advisory to the team member and RO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Ability to converse well in English language and technically.

Job Description:

• Conduct site testing & commissioning activites
• Carry out field services such troubleshooting, repairing, maintenance & operation of electro-hydraulic machines
• Preparation of equipment and spares for project mobilization
• Support the project team during the fabrication, assembly & testing stages

Job Requirements:

• Candidate must possess a Degree/Diploma in Electrical/Mechanical Engineering
• At least 2 Year(s) of relevant working experience
• Preferably with knowledge of hydraulics, electric drives, controls
• Good troubleshooting & communication skills
• Willing to travel overseas frequently
• Independent, resourceful & responsible
• Inexperienced applicants are also welcome to apply

As the Facility & Security Engineer, you will be responsible for overseeing all aspects of facility operation, maintenance and projects within our electricity generating plants, ensuring compliance with local regulatory policies. In addition, you will be involved in the development of a Facilities Asset Management Plan, identifying improvement opportunities and implementing best practices.

Responsibilities:

• Plan and coordinate infrastructure and equipment maintenance schedules & activities.
• Respond to work order requests and equipment maintenance schedules & activities.
• Investigate, analyze and determine root cause and report breakdowns and faults effectively.
• Carry out and review facilities’ maintenance programs and recommend actions as required.
• Identify and report on plant and equipment inefficiencies and possible improvement initiatives.
• Evaluate operational systems and facility infrastructure to ascertain and improve operational efficiencies.
• Monitor and review plant infrastructure, asset life expectancy and implement long-term maintenance plans.
• Prepare Purchasing Documents for the purchase of spares & the purchase of Work Services required to carry out the rectification works of the faulty equipment, faulty buildings’ infrastructure etc. (E.g. Preparation of tender specifications for service contracts such as cleaning, landscaping, pest control, waste disposals, card access systems, lifts & sewerage treatment plants’ service & maintenance works, auto-gates/ auto-barriers maintenance).
• Prepare the Facility Asset Management Plan (AMP).
• Design and oversee the implementation of facility expansion, layout, systems, and quality controls.
• Engage contractors and establish procedures to supervise and monitor the performance of contractors to ensure that the company’s requirements for work services are met.
• Ensure compliance with relevant regulations, building codes, and health and safety standards.
• Prepare technical reports on breakdowns, proposals and compliance documents.

Requirements:

• Degree in Mechanical, Electrical, Facilities Management Engineering or equivalent.
• Experience with SAP, and MS Office, especially Excel & PowerPoint.
• Knowledge of the building regulatory requirements in Singapore.
• Strong verbal and written communication skills.
• Strong troubleshooting, problem-solving and project management skills.
• Experienced in managing small to medium scale plant & building facilities incorporating maintenance plans, scheduling, costings, and cost controlling.
• Experienced in carrying out plant & buildings maintenance works, demonstrates personal creativity and/or flexibility in problem solving and budgeting process approaches

A member of the Electrical team, you will be responsible for performing Electrical maintenance works in accordance to maintenance plan including carrying out projects as required.

Job Descriptions:

• Perform troubleshooting and root cause analysis to resolve plant faults
• Execute approved plant improvement works and prepare technical specifications for equipment parts, work services and raise requisition papers
• Perform scheduled plant inspection according to maintenance regime and execution of plant maintenance activities
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Preparation of weekly and monthly activity reports, overhaul, technical and trip reports
• Perform other duties as assigned by supervisors

Job Requirements:

• Graduate in Electrical Engineering with a keen interest to build a career in the Power industry
• Sound knowledge in Electrical
• Self-motivated team player; analytical mind with strong planning & problem solving skills
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

company's major works interior works & mixed construction works

Required minimum 2 yrs experience

educational qualifications are bachelor degree civil engineering or

Diploma in civil engineering

good experience in Autocad drawings & interior designings

prefered with driving License ( class 3 level )

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Hiring Now: Resident Technical Officer (RTO) – Repainting Project

Are you detail-oriented with a strong technical background in building projects? We’re looking for a skilled Resident Technical Officer (RTO) to join our team and oversee on-site activities for a major repainting project. As an RTO, you will play a key role in ensuring our project meets the highest standards for quality, safety, and compliance.

What You’ll Do:

1. Supervise daily repainting activities to ensure adherence to project specifications, timelines, and safety standards.
2. Conduct quality inspections on surface preparation, paint application, and finishes.
3. Enforce safety regulations and create a safe work environment for all site personnel.
4. Maintain thorough records, submit daily activity reports, and collaborate with contractors and project managers.
5. Identify and resolve on-site technical or logistical issues promptly.
6. Requirements:
7. Diploma or degree in Civil Engineering, Building, or related field.
8. At least 3 years of site supervision experience, ideally in repainting or building maintenance projects.
9. Certified RTO with recognized local authority credentials (optional).
10. Strong skills in quality control, safety management, and regulatory compliance.
11. Excellent communication and problem-solving abilities.

Roles & Responsibilities

· Coordinate with principals, sales, project team and clients to produce valued engineering design & construction documents.

· Strong knowledge of building/Façade systems

· Plan concept design by studying construction specifications and material details.

· Prepare 2D & 3D Detail Drawings with Autocad.

· Well organize design drawing sets.

· Obtain approvals from clients with concept drawings.

· Preparation of Shop, Construction and As-built drawings.

· Maintains technical knowledge by attending design workshops.

· Contributes to team effort by accomplishing related results as needed.

Requirements

· Degree in Engineering related to Construction sector.

· Well versed with Autodesk Autocad software.

· Good verbal, written and graphic communication skills.

· Able to communicate well in English.

· Self-motivated and enjoys contributing to highly collaborative teams

· Possess initiative & good working attitude

· Flexible and well-rounded to accommodate shifting schedules, project demands, multiple time zones, and deadlines.

Kindly indicate the following information in your CV

· Current / Last Drawn Salary (in SGD)

· Expected Salary (in SGD)

· Availability

· Residency Status in Singapore

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a QC Expert you will be responsible for the supervision of all testing techniques and scheduling of testing with coordinating with the other departments delivering samples to ensure timely delivery of results. This role is also required to supervise the review of laboratory data (both internal and external) and the closeout of deviations.

Responsibilities

• Supervising the review of laboratory data (both internal and external) and the closeout of deviations
• Author and review Change Controls, Deviations/Investigation as well as Test Methods, Specifications and SOPs
• Perform report writing (Example: Deviations/Investigations/Trending)
• Maintains knowledge of new technologies
• Strong ability to manage multiple priorities and lead projects.
• Customer and regulatory agency interaction as required
• Problem solving of analytical/ microbiological methods as well as troubleshooting of equipment as applicable.
• Manage/perform equipment qualification and validation maintenance review
• Lead/ execute method transfers and validation/ qualification.
• Lead or participate in initiatives aimed at continuously improving quality processes and outcomes e.g. Lean Six Sigma methodologies, cost-cutting solutions, idea-box, etc
• Collect and analyze data related to quality metrics e.g. using statistical tools to identify trends, patterns, and potential areas for improvement
• Participate in Risk Assessment
• SME in 1 or more areas as aligned with training plan and known as go to person for technical advice.
• Able to make decision on the area of expertise
• Coach and train junior team member
• Participate and support in audit
• Any other duties as assigned by your manager

Experience:

• Bachelor’s or Diploma in a relevant science field or equivalent.
• Minimum of 10 years of experience in GMP (Good Manufacturing Practice) Quality.
• Relevant work experience, preferably in a laboratory setting, within the biotech or medical field.
• Individual contributor, high level understanding of QC activities and lab function

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a People Manager to guide and mentor a team of technical professionals, fostering a collaborative and high-performance work environment.

Responsibilities

•Provide technical leadership for our cybersecurity product capabilities development and sustenance.

•Technology Subject Matter Expert who understands security landscape and solution credibly with ability to work with cross-functional team including solution architecting, pre- and post-sales engagements, project management to deliver cybersecurity product solutions.

•Set strategic direction in alignment with business objectives, keeping abreast of industry best practices.

Requirements

1. At least 10 years of software development experience of which at least 5 years are in a technical leadership role in cybersecurity

2. Relevant Industry Certifications such as CISSP, CSSLP, PMP or equivalent

3. Technical knowledge in following is a must:

i. Cloud Architecture: Planning and implementing the applications & data to the cloud and ensure organization’s technical and business requirements are met.

ii. Networking Knowledge: Demonstrate expertise in networking concepts, protocols, and technologies, with the ability to design and implement complex network infrastructures.

iii. DevOps: Drive the adoption of DevOps practices within the organization, including continuous integration, automated testing, and continuous delivery.

iv. Software Version Control: Implement and manage software version control systems to track changes, facilitate collaboration, and ensure code quality.

4. Previous experience working on government projects specifically in cybersecurity environment and governance, risk management and compliance is an added advantage.

5. Effective communication and presentation skills with ability to transpose complex security concepts into business terms/impacts.

6. Experience with deployment orchestration, automation and security configuration management

7. Ability to work easily with diverse and dynamic teams

Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Executive Engineer (Civil & Structural) to join the Singapore Office in a growing engineering consulting business.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• To work with the Qualified Person (QP) to develop structural scheme for structures and buildings.
• To carry out engineering analysis to assess the stability and load to be sustained by the structures.
• To carry out engineering design in according with Eurocodes or relevant international design codes.
• To prepare submission to authorities for approval of design.
• Provide technical advice to team members/colleagues in supporting or leading role and embrace a culture that values teamwork
• To attend project meetings with Client, Project Manager and Consultants from other disciplines.
• To attend site progress meetings and reply to technical queries.
• To lead junior engineer in delivering design and seek clearance for all relevant parties and authorities
• To conduct supervision & contract administration when required

Key Requirements

• Degree in Civil/Structural Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5 years of experience with design of multi-storey/high-rise building from a local engineering consulting environment will be an advantage.
• Those registered as Professional Engineer with PEB and/or have more relevant working experience will be considered for senior role.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of relevant engineering software.
• Excellent written & spoken communication skills in English.
• Able to interact and work with colleagues and member of other consultants at various levels.
• A team, client and delivery focused working style.

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

• Salary up $4500
• 9am - 6pm (Mon to Fri)

Responsibilities:

• Assist project manager in planning and execution of project plans at site.
• Able to read and understand construction drawings.
• Prepare and submit of shop drawings and as-built drawings to client.
• Preparation of Weekly and monthly progress reports
• Attending design discussions with the Engineers, Managers, Client, and QP.
• Reviewing Consultant’s design drawings and specification

Requirement:

• Diploma/Degree in Engineering or related
• Knowledge in AutoCAD software
• Possess of BCSS safety certificate

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1880058 | Dylan

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevOps Engineer

Internal Code: A24104

We aims to spearhead the digital transformation of government. We are a team that aims to design and develop software applications that help government agencies better serve the needs of Singaporeans. We adopt an Agile development approach and work towards adopting tech best practices and cutting edge tools.

We are seeking highly motivated individuals skilled in DevOps to join us for some exciting projects. You’ll work with a multidisciplinary team of designers, developers and business experts to create solutions that exist in both digital and physical realms.

As we launch new products, your role will be to ensure that the future of public service is not just functional, but delightful to use. Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

What will you do?

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud)
• Be an innovative and hands-on DevOps engineer capable of looking at both the technology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely highlevels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations.

What are we looking for?

• Degree or Diploma in Computer Science/Engineering, Information Technology, Communications or other related disciplines.
• At least three years of professional experience in a DevOps engineer or equivalent position.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills e.g. Python, Bash, JavaScript
• Cloud computing deployment and management experience -AWS
• Understand/practice Agile projects
• Strong understanding of networking

Preferred:

• Experience with highly scalable distributed systems
• Breadth of knowledge - OS, networking, distributed computing, cloud computing

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.