Key Responsibilities

• Is proficient on primary toolset and demonstrates ability to acquire additional systems and applications. Performs startup activities through Tier II with limited support. Able to complete qualifications with minimal assistance.
• Completes quality repairs. Actively responds to fab issues by communicating with engineers in other locations and participating in escalation conference calls. May initiate or participate in projects to drive down costs or increase uptime. Ability to carry out action plans and report findings. Verifies operational quality of system equipment.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work. May identify procedural issues.
• Can perform most retrofits on equipment. Assists in process issues.
• Applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area. Demonstrates strong interest and knowledge of the customer’s business. Builds and maintains customer satisfaction through clear, consistent communication and the sharing of collective knowledge. Is consistently able to operate in high pressure or ambiguous situations. Solicits customer feedback. Understands the impact of various actions/decisions on the account. Is aware of potential dissatisfies and escalates as appropriate. Develops and executes corrective action plans.
• Performs BKM’s. Actively engages in the use of knowledge management systems. Complies with all IP guidelines.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Is skilled in a range of processes, procedures, systems and tool sets to carry out assigned tasks or has developed deep skills and knowledge of tools in a single area

Business Expertise

• Uses knowledge of how the team integrates with others to accomplish the team objectives
• Builds and maintains customer satisfaction through clear, consistent communication and the sharing of collective knowledge

Leadership

• Provides informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on practice and existing precedents or procedures

Impact

• Impacts the quality, timeliness and effectiveness of the team; uses discretion to modify work practices and processes to achieve results or improve efficiency

Interpersonal Skills

• Explains technical information within the team

Job Description

Key Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
• Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Requirements

• Min 3 years of experiences as Manufacturing Engineer in semiconductor/ electronics or engineering industries
• Relevant Engineering qualifications
• Able to work with any levels of stakeholders globally
• Able to attend global meetings of different time zones
• Project management experiences would be an added advantage
• Microsoft excel and Tableau

Work Location

• 8 Upper Changi Road (Bus 2, 5, 37)
• No company transport available

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Key Responsibilities

Leads the Industrial Engineering Team. Oversees methods and analysis including process design, time and motion study, and leads continual improvement initiatives.

Ensures projects and programs within areas of responsibility are completed and implementation into business with quality tools, supporting processes and ongoing measures for success. Includes improved efficiency and cost savings. Works across organizations to provide business case for Plan of Record and IE projects. Ensures cost analysis, and return on investment calculations associated with project meet annual operation plan and budget.

Leads ergonomics / human factors initiatives, drives process improvements, and provides engineering solutions. Drives and implements Ergonomic improvements across multiple functions.

Ensures manufacturing rearrangement projects, plant layouts, material flow and warehousing designs are optimized for cost, capability and capacity. Leads manufacturing and warehouse rearrangement projects across multiple functions; coordinates the efforts of other IE's to achieve plan of record objectives.

Drives the strategic implementation of product introductions into volume manufacturing by developing factory space, capacity and capability solutions. Develops the New products factory capability roadmap for assigned work centers.

Drives the development of specialized tooling solutions for the assembly, integration and intra-plant transport of modules, assemblies and mainframes.

Serves as a role model and sets the example, whose behavior is emulated by other engineering team members. (Safe behavior, follow proper protocols and procedures, including core values).

Drives capacity/demand analysis business processes and ensures that capacity planning processes are deployed and maintained across multiple functions. Oversees solutions to address capacity constraints and works with Operations and Logistics organizations to implement these solutions prior to production ramp. Drives manufacturing and logistics initiatives to improve factory asset utilization and production processes.

Leads and drives the effort to establish and document business processes across multiple functions.

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Job Description

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.
• Develops methods and parameters, project methodology and/ or project proposals.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.
• Reduces qualification cycle time and cost while still meeting quality performance requirements.

Requirements:

• Relevant experiences in customer quality role
• Prior industry experiences in manufacturing, electronics or semiconductor
• Ability to support different time zone when required
• Good communication and interpersonal skills

Job Responsibilities:

• Prepare work packages and ensure spare availability prior to work commencement
• Prepare work packages and provide support to technical crew
• Liaise with technical crew and various departments to ensure smooth and timely completion of planned tasks
• Perform data input and analysis
• Plan and track monthly programs for completion
• Answer customer queries
• Any other duties required

Job Requirements

• Min ITE/Diploma in Aerospace Engineering or equivalent qualifications
• Preferably with at least 1 years of relevant working experience in aviation or related industry
• Basic computer skill required
• Knowledge of SAP will be an advantage
• Comfortable with 12 hours rotating shift work arrangement
• For LMCC Department

Job Description:

Arrival / Departure / Towing / Ground Support Equipment

• To perform Aircraft Docking Guidance System (ADGS) and manual marshalling of aircraft
• To perform inspection of bays and ensure no Foreign Object Debris (FOD)
• To install / remove wheel chocks and grounding cables
• To connect / disconnect tow bar to the air tug
• To deliver ground support equipment including maintenance steps
• Any other duties as assigned by the supervisor

Requirements:

• Minimum NITEC in Engineering or equivalent with 1 years of working experience in Airline industries is preferred.
• Comfortable with 12 hours shift work arrangement
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Description:

• Conduct Classroom documentation training
• Conduct OJT & assessment
• Develop Training Syllabus and Training Assessment
• Develop Training Plan and OJT Log

Requirements:

• Professional Certificate/NiTEC, Diploma
• Train the Trainer qualification will be an advantage
• 1 to 2 years of aviation experience
• Aircraft Technician with no prior trainer experience are welcome to apply

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum 'O' Level / Nitec in engineering or equivalent.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6- to 9-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.

• Monitor customer spare requirement and liaise with various departments to activate, track, and expedite on the replenishment of on-site inventory upon usage.
• Act as customer account planner and point of contact for customer enquiries on material requirement.
• Initiate loan/exchange/purchase activities to support material shortages.
• Monitor EDD and AWB information and accurately update the Web portal.
• Weekly reporting at Customer operations meeting on spares status.
• Raise Purchase Req for Class C and D components.
• Follow up on operations spares issuance for closure; handling of administrative functions relating to customer’s spare orders.
• Providing timely responses to customers’ queries and requests.

Qualifications/Requirements

• Polytechnic Diploma in an Engineering Field.
• Working experience in material management in the aviation industry would be an advantage. Candidates with experience in inventory management in other industries would also be considered.
• At least 2 years working/professional experience. Working experience in the aviation industry would be preferred.
• Strong analytical, interpersonal and communication skills.
• Good human relations skills.
• Ability to learn fast and willingness to take up additional responsibilities.
• Proficiency with SAP will be advantageous.
• Customer-centric with the ability to adapt to different types of characters.

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Responsibilities:

o Handle Electron Beam Welding projects (on-the-job training).

o Plot drawings using Solidworks

o Competent in technical Engineering knowledge and specifications of drawings

o Pro-active in solving project issues and confident in liaising with customers

o Process scheduling

o Maintaining of processes, work instructions, documentations

o Trouble-shooting of machine breakdowns, if any, and liaising with Vendors.

Requirements:

• Degree in Mechanical/Materials Engineering or equivalent
• Welding experience is advantageous
• Responsible, independent worker who takes initiative
• Good communicator, motivated and reliable
• Minimum 2 years working experience
• Leadership Qualities
• 5 days
• Working Location: Loyang Street
• Salary commensurate with experience & qualifications
• For immediate employment

Job Description

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

• Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.
• Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.
• Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.
• Ability to fabricate or modify RF components to change their performance or enable access for instrumentation.
• Ability to instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.
• Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.
• Support System Integration during the assembly and final testing of new product designs.
• Interface with other groups to workout design, systems architecture development and integration issues.
• Define all equipment interfaces and systems architecture and ensure they are up to date and documented.
• Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.

Education Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Physics or related engineering field with a 1-3 years of relevant RF experience

Functional Knowledge

• Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
• Knowledge of circuit theory and ability to develop analytical models of RF components
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful

Work Location

• Science Park II

Job Responsibilities:

• Plan and assign equipment operators for aircraft pushback/towing, water/toilet servicing and supply of GSE equipment.
• Liaise with IGO/Maintrol/CEG for aircraft towing and other utilities servicing activities.
• Liaise with Equipment Maintenance team on equipment requirements/shortages.
• Maintain regular walkie-talkie communication with the equipment operators to ensure punctual departure of flights and any other changes in assignment for any services.
• Attend to customers’ requests/complaints (where necessary).
• Update the duty supervisor on any delay.
• Carry out any other duties as assigned.

Job Requirements:

• Higher Nitec / Diploma in Aviation or Aircraft Mgt
• Candidates who are proficient in SAP and Microsoft Applications will have an advantage
• Must be able to perform shift works
• Work Location: Changi Airport

Job Responsibilities:

• Plan and assign equipmentoperators for aircraftpushback/towing, water/toilet servicingand supply of GSE equipment.
• Liaise with IGO/Maintrol/CEG for aircraft towingand other utilities servicing activities.
• Liaise with Equipment Maintenance team on equipmentrequirements/shortages.
• Maintain regularwalkie-talkie communication with the equipment operators to ensurepunctual departure of flights and any other changes in assignment for any services.
• Attend to customers’ requests/complaints (wherenecessary).
• Update the duty supervisor on any delay.
• Carry out any other duties as assigned.

Job Requirements:

• Higher Nitec / Diploma in Aviation or Aircraft Mgt with at least 2 years experience in the similar role in aviation industries.
• Candidates who are proficient in SAP and Microsoft Applications will have an advantage.
• Must be able to perform shift works

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Masters (in semiconductor based light emitting optoelectronics preferred)

Minimum Experience

Minimum 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system

Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry

Job Description & Requirements

- Assigned to Business Development Manager as their Sales Support

- Provide RFQ, source rate with airline and oversea agents

- Daily shipping co-ordination of AIR/SEA/Cross Border /3RD PARTY shipments

- To handle billing advise and recoveries

- Administrative support (filing, circulation, preparation/generate report and etc.)

- To undertake new projects/new assignment given from time to time

- To represent sales department in various taskforce/committee

- Other duties as assigned by the Department Manager

Job Requirement

• Good interpersonal and communication skills
• Strong ownership and sense of responsibility
• Ability to manage multiple tasks efficiently
• Excel skills will be an advantage

Benefits

• Good structured career progression
• Comprehensive training will be provided
• Monday – Friday (5 days standard Office hour)