Responsibilities:

• To manufacture production units to meet performance objectives
• Performing proper manufacturing process ( eg: Integration , functional test, Final control ) of all production unit / customer return unit for which he/she has been trained or assigned to perform.
• Manage the WIP level and turn around time at the optimum level
• Accurate reporting of any anomalies encountered during production process. Detect and alert in case of default or results deviations (even if still within the good range)
• Registration and maintenance of product quality and configuration of data.
• Ensuring Usability of test means or equipment whenever necessary with the support of M&T dept.
• To involve in 5S and Kaizen initiatives
• To support administrative works ( Raise PR, Document Archiving Process ) and production task as per assigned by team lead/supervison

Requirements:

• Min. NITEC or Diploma in Electronics / Mechatronics Engineering
• Ability to understand and follow manufacturing/technical instructions
• Ability to read or interpret test results
• Ability to understand the concept of Lean

Other Information:

• 1 Year Contract
• Working Location: Changi
• May be required to work in shifts.

Job Descriptions:

• Administer WSH policy and coordinate compliance with safety procedures and WSH legal requirements.
• Coordinates safety management system, promote and develop safety culture, measure and monitor safety performance.
• Recognizes safety hazards and control measures and advise on corrective recommendation(s).
• Prepares and facilitates safety awareness programme.
• Maintain safety manual and procedures.
• Monitors and inspects work activities to ensure that safety practices are carried out in all work operations.
• Carry out workplace accidents/incidents investigation and report. Monitor HIRA
• Coordinates and participates in safety meeting, and briefing.
• Assist in Quality management system related work and surveillance.

Job Requirements:

1. Possess WSQ Advanced Certificate in WSH (Level B)
2. At least 1 or 2 years of work experience relevant to the work to be carried out by a WSH Coordinator
3. Possess knowledge of Workplace Safety and Health Act
4. Possess valid class 3 driving license is an advantage
5. Good knowledge of Ms Word, Excel and PowerPoint
6. Good communication skills, teamwork, initiative
   Good English writing skills for report preparation

Job Description:

• Liaison with customer reps on documentation procedures
• Update and review QMS documentation
• Conduct external and internal audits
• Analyze and follow up on audit findings
• Implementing Quality improvement programs or campaigns
• Conduct training on Quality and Safety
• Carry out investigation into incidents, accidents and customer complaints
• Carry out surveillance on work compliance, safety, good housekeeping and proper documentation

Job Requirements:

• Professional Certificate/NiTEC, Diploma
• Conversant with Airworthiness requirements and / or Quality Management System (AS9100)
• Internal auditor trained (ISO9001/AS9100)
• Knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment 1 to 2 years' experience in aviation
• Possess valid class 3 driving license is an advantage

Job Responsibilities:

• Performing proper repairs of all unserviceable equipment for which he/she has been trained or assigned to perform and acting also as a technical resource in analysis of failures when required.
• Performing proper tests, repairs and or modifications in of unserviceable equipment in compliance with Thales Solutions Asia Quality programs as well as relevant procedures issued by Industrial Quality dept or the ARU Manager.
• Respecting the TAT target as given by the ARU Manager for all repair and/or modification activities.
• Maintenance and calibration of test means or equipment whenever necessary with the support of M&T dept.
• Maintaining an up to date knowledge of the product worked on with relevant technical documentation like SBs, SILs, TIs and updates of the CMM.
• Ensures the On-Time delivery of repairs and Quality of repairs
• Contributes to continuous improvement actions

Job Requirements:

• Higher Nitec/Diploma in Electronics Engineering
• Strong knowledge of analog and digital electronics.
• Competent in the use of in-depth diagnostic theory and technique.

Responsibilities:

• Perform Daily Flight handling assignment
• Monitoring of AC changes and amendment of assignment as required
• Tracking of long transit & layover AC Part A completion / Ac Log Entry
• Updating of AC handover task list

Requirements:

1. Min NITEC or Diploma holder in Aerospace Engineering or equivalent
2. Preferably with at least 1 years of relevant working experience in aviation or related industry
3. Basic computer skill required
4. Knowledge of SAP will be an advantage
5. Comfortable with 12 hours rotating shift work arrangement

Responsibilities:

• Responsible in the transfer of Bench/Equipment
• Responsible for the setting-up of means and tools required for multiple pilot, repair and production lines with adequate support from the Central Engineering Team
• To conduct and support the necessary interfaces, technical negotiation, follow up on supplier realisation and managing of installation and transfer

Requirements:

• Diploma in Electrical, Electronics or Mechatronics Engineering
• Understanding of engineering drawings, schematics, tool/bench drawings and other technical documents
• Flexible and ability to adapt to quick changing environment
• Ability to work in a system-software integrated test bench environment
• Ability to learn and work with new and diverse technologies

Other information:

• Working Location: Changi
• Working Hours: Monday - Friday, 9am - 6pm
• Company shuttle bus is provided at designated MRT stations

Job Description

• Consolidate and create manpower supply timesheets from various divisions for approval.
• Create new data in time attendance system, including shift patterns.
• Process time attendance and checking of overtime calculation.
• To verify with staffs and resolve odd clocking issues.
• Manage and submit the approved timesheet on time for payroll processing
• Assist in the hardcopy compilation of company/ Labour Supply Annual Leave form, MC, petty cash, medical claim for Manager’ approval and submit to Human Resource.
• Raise allowances and transfer forms and submit to Ops Manager for approval before routing to Human Resource.
• Submit internal and external monthly headcount and manhour reports.
• Assist Ops Manager on any other ad-hoc duties

Job Requirements:

• Minimum NITEC/Diploma with at least 3 year experience in the relevant field.
• Experience in Time Sheet/Staff attendance is required
• Highly independent and meticulous.
• Possess good interpersonal and communication skills

Job Description:

• Establish sales channels;
• Expand the customer base and maximize the market coverage;
• Promote and sell company’s range of fire protection products;
• Attend to sales enquiries and prepare sales quotation;
• Providing pre-sales technical assistance and product education;
• Assist in formulating business strategies and identify new business opportunities;
• Preparing and negotiating tender and contract terms and conditions to meet both client and company needs;
• Providing after-sales support services;
• Build & maintain good relationship with clients;
• Meeting regular sales targets and coordinating sales projects;
• Supporting marketing activities by attending trade shows, conferences and other marketing events;
• Making technical presentation and demonstrating how a product meets client’s needs.

Requirements:

• Diploma or Degree in Engineering preferably in Mechanical/Electronics/Electrical/Industrial or any related field
• Hardworking, proactive, self-motivated with good working attitude
• Aggressive and strong customer oriented service mentality
• Possess strong communication and interpersonal skills
• At least have 3 years of working experience
• Immediately available or start work within short notice

Are you passionate about building great products? Do you want to redefine the way travellers explore the world? Keen to be part of this growth journey with a bunch of amazing people? Then Pelago is the place for you!

We are looking for ambitious and motivated talents who are excited about staying on the cutting edge of Technology and always keen on innovating new ways to drive growth and taking our startup to new heights.

WHO ARE WE?

Pelago is a travel experiences platform created by Singapore Airlines Group. Think of us as a travel magazine that you can book - highly curated, visually inspiring, with the trust and quality of Singapore Airlines. We connect you with global, local cultures and ideas so you can expand your life.

We are a team of diverse, passionate, empowered, inclusive, authentic and open individuals who share the same values and strive towards a common goal!

WHAT CAN WE OFFER YOU?

- A unique opportunity to take end-to-end ownership of your workstream to deliver real value to users.

- Platforms to solve real user problems concerning travel planning & booking with innovative products/services.

- An amazing peer group to work with, and the ability to learn from the similarly great minds around you.

- An opportunity to be an integral part of shaping the company’s growth and culture with a diverse, fun, and dynamic environment with teammates from different parts of the world.

- Competitive compensation and benefits - including work flexibility, insurance, unlimited annual leave, remote working and more!

WHAT WILL YOU DO?

- Write code as part of a diverse and multi-skilled development team

- Design and architect innovative, modern architectures and follow best practices

- Champion a focus on software qualities such as testability, security, scalability, operability etc

- Work with state of the art technologies to solve genuine, real-world problems

- Champion good agile practices that provide a foundation for iterative product development

- Build strong relationships with product managers, designers and business team

- Enjoy working in a diverse, dynamic, collaborative, transparent, environment where everyone's ideas and opinions are equally valued

- Demonstrate and communicate a passion for implementing highly scalable and maintainable backend services

- Share technical solutions and product ideas through design review, pair programming, code review and technological discussions

WHAT EXPERTISE YOU NEED TO HAVE?

- 2+ years of hands-on development and delivery experience with a broad mix of languages and technologies

- Experience working with Agile, Lean and Continuous Delivery approaches, such as Continuous Integration, TDD, Infrastructure as Code etc.

- Deploying your own code to production with a CI/CD pipeline

- Working with relational databases and interacting them with ORMs

- Experience building cloud native scalable software architectures-

API design and structure, especially in collaboration with the frontend team

- Building software in a security-conscious way, especially keeping in mind things like the OWASP top 10 vulnerabilities

- Strong people skills that contribute to an open and collaborative environment

- Experience in communicating ideas and decisions to a variety of team members

- Working closely and proactively with product managers and designers to deliver a high-quality user experiences

Please also let us know if you have experience with any of the following, although these are not required:

- Infrastructure-as-code tools like Terraform

- Experience working in the travel industry or with B2C platforms

Below are the technologies we primarily use. However, we'll always choose the best tool for the job (maybe you can suggest one?), so don't consider this list either exhaustive or immutable:

Languages / Frameworks: Python, GraphQL, Open AI

Infrastructure: Amazon Web Services, AWS Lambda

If you’re as excited as we are in this journey, do apply directly with a copy of your full resume and portfolio (if any). We'll reach out to you as soon as we can!

Job: Product Development Engineer/Manager

· 5 days week (8am to 548pm)

· Changi North

Requirements

· Mechanical Engineering degree

· Proficient in English language

· CAAS L11 / M10 (preferred)

· Knowledge of CAAS, EASA, FAA regulations

· Part 21 manufacturing and/or Part 145 MRO experience

· Experience in aircraft interior work (preferred, not mandatory)

· In-depth knowledge in DOA for Part 21 manufacturing engineering development work

· In-depth Knowledge in Part-145 repair development work

· Knowledge for SRM, CMM and technical data interpretation

· Integrity to ensure safety compliance to aviation requirements

· Team player

Role & Responsibilities

· Review repair work scope report for correct repair callout

· Review BOM list to ensure correct spares and consumables procurement

· Review and approve repair traveller prior to repair work

· Coordinate with Operations to ensure proper tooling available in workshop

· Development of Part 21 product engineering work for DOA approval

· Development of Part 145 repair engineering work for repair capabilities

· Development of production and repair shopfloor work flow with Operations

· Review production and repair work cycle time with Operations for optimum manpower deployment

· Conduct First Article development, evaluation and qualification for new product and new repair capabilities

· Filing of engineering work packages

· Work closely with Operations to ensure compliance in workshop for proper tooling availability, process improvement, workshop layout optimization and manpower planning.

· Ad-hoc assignments

Key Responsibilities

1. Provides highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems.
2. When necessary, works closely with customer to optimize tool performance to meet customer process and integration requirements.
3. Checks and approves operational quality of system equipment. Instructs customers in the operation and maintenance of the system.
4. Knowledge of 2 or more processes on 1 or more technologies

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Responsibilities

• Assist SRA/ARA in carrying out supervision for Architectural works and its related works
• Monitor the Project including progress control, quality control, variation/cost control, safety control, environmental control, etc
• Report any critical and/or major issues to SRA/ARA proposing possible solutions
• Liaise and coordinate with Consultants to resolve technical and/or interfacing issues
• Keep and maintain proper and updated site records on progress of work

Requirements

• Diploma in Civil & Structural Engineering or Architectural Studies from a recognized tertiary institution
• Accredited as a Resident Technical Officer (Tunnel) with IES/ACES
• At least 15 years site experience with extensive architectural and interior design experience, of which 5 years must be in the LTA tunnel projects
• Conversant in statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress reports
• Project Location: Changi East, working hour: 56 hours a week

Kindly indicate your current and expected salary in your CV.
Please be informed that only shortlisted candidates will be notified.

Job Description

Key Responsibilities

• Intermediate knowledge of NPME role. Independently develops, implements, and releases new product BOMs for complex modules and product structure. Works with key stakeholders to develop and implement new product manufacturing, test, and sourcing strategies.
• Manages the development and validation of Operation Method Sheets (OMS) for medium complex modules.
• Performs 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Actively participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals.
• Orchestrates change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs).
• Documents product-related issues/enhancement opportunities and performs Root Cause Corrective Analysis (RCCA). Leads the disposition and resolution of issues requiring Long Term Corrective Action (LTCA) for project/program.
• Leads the managed build process for programs/projects.
• Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to new product introductions.
• May perform other duties as assigned.

Requirements:

• Strong understanding of engineering principles, manufacturing processes and design for manufacturability.
• Ability to identify and solve manufacturing and production related problems effectively.
• Ability to exercise judgement based on the analysis of multiple sources of information.
• Curiosity-driven learning and improvement with engineering skills.
• Willing to adapt to changes quickly in fast-paced environment, stay updated with work process.
• Familiarity with product assembly process, and bill of material.
• Experience in model based CAD software.
• Knowledge of product development and its lifecycle.
• Ability to manage projects, set deadlines and work within constraints to complete successfully.
• Strong communication skills to collaborate with team members.

Desired Skills:

• Familiarity with various manufacturing processes such as machining, molding, casting.
• Experience as design, or new product manufacturing or manufacturing engineer.
• Advanced skills in Microsoft Office and Teams.
• Proficiency in model based CAD software.

Education:

• BS in engineering, applied physics or other related field.
• 2 to 7 years of experience is desired.

Our client is a leading global provider of Airport Ground Support Equipment (GSE). They are looking to hire a Field Service Engineer to join their team in Singapore.

This role reports to the Customer Care Manager (based in Singapore).

Essential Duties and Responsibilities

• Travel to customer site to complete a variety of assignments, including but not limited to, commissioning of new equipment, providing warranty troubleshooting and repair support, training customers on operation and/or maintenance of the products, and execution of paid service work to repair or upgrade a customer’s unit in the field.
• Provides and maintains expert-level technical skill on all equipment. Have a good technical/business understanding of the complete product range of the Company equipment. Supervise, manage, and provide technical assistance in equipment troubleshooting and diagnostic support to applicable parties (subcontractors, customers, etc.)
• Development of Product Services sales opportunities at customer site or during communications. Explore customer requirements to promote parts kits, training, repairs, unit inspections, and equipment refurbishment and maintenance (ProCare). In addition, seek out, identify, and effectively communicate information regarding competitive products and services.
• Attend meetings as Company representative to address technical issues, progress schedules and site related issues within the scope of work.
• Identify and track parts required for installation or warranty, coordinate on site activities, communicate technical support and follow up with customers to ensure satisfaction.
• Support the Account Manager with new equipment sales opportunities. Work collaboratively with the Sales team to provide useful resources and specific information on competitors’ equipment in supporting the sales effort.
• Provide customers with estimations on repairs, training, or customer care solutions. Understand and manage field installation budget, on assigned projects, while utilizing cost effective measures to manage daily project activities and to resolve outstanding issues.
• Timely and thorough completion of job documentation. This includes, but is not limited to, service order trip reports, product registration forms, equipment checklists, unit defects identification, credit card expense reconciliation, e-mail communications to internal or external customers, and customer feedback surveys.
• Development and documentation of service-related processes, including but not limited to product repair procedures, work aid documents, departmental procedures, and customer communication forms.
• Work collaboratively with the team of Field Service Engineers to share knowledge and resolve problems.
• Provide liaison support of the regional service offices, including communication with engineering, vendors, and/or other field service representatives to resolve customer issues in a timely manner.
• Ability to speak to all levels of management in relation to customer needs.
• Ability to work with manufacturing on how to better processes for equipment as it arrives to customer locations, i.e., quality improvements.
• Participate and contribute to successful Ad Hoc project management, training program development, instructional development and generic problem analysis on an as-required basis.
• Follow all Company policies and procedures including, but not limited to, the travel policy, car rental policy, substance abuse policy, ISO procedures, expense policy, company cell phone and laptop computer utilization.
• Develop win-win results for the Company and the customer in each situation.
• Relies on experience, judgment, and advanced skills to plan and accomplish assigned goals and objectives.
• Conduct all work in a professional and safe manner with maintaining the sense of urgency that our customers expect.
• Maintain the highest ethical standards, open and honest communication, work with integrity and treat everyone with respect.
• Representative will complete all necessary job preparations for upcoming work accordingly.
• Other projects and responsibilities may be added at the company’s discretion.

Education and Experience:

• Minimum 10 years of technical experience in the GSE industry or similar.
• Associate or bachelor’s degree in a mechanical field or business education is a plus.
• Possess a valid driver's license.

Training Requirements (licenses, programs, or certificates):

• Participation in selected technical and management training programs developed within and identified by the company.
• On-the-job training and working/traveling for development of new hire Field Service Engineer.

Specialized Knowledge, Equipment, and Applications:

• Must have excellent interpersonal and oral/written communication skill.
• Lean / Relentless Continuous Improvement
• Knowledge of industry trends and process improvements with the ability to cost effectively implement while improving performance.
• Strong PC skills in MS Office environment.
• Must have ability to understand complex and technical situations.

Other information:

Work Environment - General office environment with exposure to warehouse environment. Exposure to airport ramp environment.

Travel - To achieve results this person must be willing to travel to customer locations up to 50%-75% of their time, mainly in Asia Pacific, with some other international travel as required.

Physical Demands - Frequent standing and walking. Constantly hearing, seeing, and talking. Able to operate the Company GSE products.

Supervisor Responsibilities – Position will liaise with and influence multiple internal departments from a technical standpoint on all Company products.

Relationship Responsibilities - This person must develop strong intra-departmental relationships and creditability. Must have the ability to develop customer relationships and reinforced by strategic visits. This person will be the customer’s advocate within the company in terms of adding value to the relationship.

Safety - Maintain proper housekeeping and safety standards by promoting proper use of protective equipment, safe operation of all machinery, tools, and equipment as well ensuring they and their teammates are always following safety rules.

1. Performing aircraft servicing, maintenance and repair in accordance with approved maintenance data and customers' requirements.

2. Ensuring that tools and equipment under his/her control are properly maintained, calibrated and correctly used for the jobs.

3. Ensuring safety rules and regulations are complied with at all times.

4. Ensuring working areas are kept clean and free of all hazardous equipment

5. Such other duties, as and when, assigned to him/her by the Lead Mech or Engineer.

6. Subject to performance and experience, Mechanic can be appointed to as a Leadman by Dept Manager.

7. Experience in and Light Checks on A320, A330, B767, B777 & B787 (Preferred)

8. Certification in Aviation Mechanical/Avionics trade or equivalent

The IS Administrator will be responsible for the administration, maintenance, and support of the Business Applications systems, and application components. This role also participates in the planning and implementation of policies and procedures to ensure system provisioning and maintenance that is consistent with company goals, industry best practices, and regulatory requirements.

Duties

• Administer Business Applications based on end-user's requirements or ongoing needs while providing excellent customer service.
• Analyze system errors and work with end users and related business units to correct and/or assist in problem resolution.
• Help diagnose performance issues related to business applications and work with internal and external vendors in their resolution.
• Plan and coordinate testing changes, upgrades, and new services, ensuring systems will operate correctly in current and future environments.
• Prepare user training document for business applications and associated processes with business departments

Requirements

• Able to start as soon as possible
• Fresh Graduate and Diploma in Information System or Computer Science related majors are welcome
• Microsoft VBA/VB Script programming Experience
• Knowledge of RPA (Robotics Process Automation) solutions
• Any experience in the area of ERP such as SAP, etc will be a plus
• Smart and willing to learn new things
• Good communication skills

Responsibilities:

• Ensuring projects meet financial targets
• Ensuring thorough understanding of project terms
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Supervise Project Engineer and work as a team, give them guidance when needed
• Effective communication with main contractor and client
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues

Requirements:

• 3-5 years proven experience as construction project manager/Engineer
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Good knowledge of MS Office
• Familiarity with construction/ project management software
• Outstanding communication and negotiation skills will be advantages.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Diploma in engineering, building or relevant field

Job Responsibilities:

1. Process Optimization: Analyze and optimize plastics extrusion processes to meet product quality and consistency. Implement changes to enhance efficiency and productivity.
2. Quality Assurance: Develop and implement quality control measures to ensure final products meet or exceed industry standards. Collaborate with cross-functional teams to resolve quality-related challenges.
3. Equipment Management: Oversee and maintain extrusion equipment, ensuring proper functionality and addressing any issues promptly.
4. Data Analysis & Documentation: Collect and analyze process data to identify trends, variations, and areas for improvement. Maintain accurate and up-to-date documentation related to process parameters, equipment settings, and quality control measures.

Requirements:

1. Diploma or bachelor’s degree in chemical or plastics related field.
2. Experience in plastics extrusion processes, preferably in manufacturing environment would be an added advantage.
3. Strong knowledge of extrusion equipment, materials, and related technologies.
4. Excellent problem-solving and troubleshooting skills.
5. Effective communication skills and ability to work collaboratively in a team.

• Be part of Technical team responsible for maintaining and ensuring the serviceability of all systems and equipment at Inflight Catering Centre (ICC) 1 & 2
• Be technically proficient in all aspects of maintaining, repairing and troubleshooting the full range of ICC systems and equipment (e.g. warehouse systems, material handling and automation systems, refrigeration systems, kitchen equipment, packaging and inspection machines, washing machines, waste management systems, etc.) and other technical related knowledge
• Manage, perform and ensure all maintenance activities and repair works are timely follow-through according to the assignment, maintenance schedule, procedures, checklists, manufacturer recommendation and completed within the timeframe
• Manage, perform and ensure all technical purchase requisition of spare parts, contracts and services are in accordance to the Company policies and follow-through to support the maintenance activities
• Manage, communicate and work professionally with all stakeholders to minimize systems and equipment downtime
• Be proactive in resolving technical faults, contributing initiatives and continuous improvements
• Always observe and follow all Safe Work Procedures and Food Safety requirements
• Always ensure Safe Work environment by housekeeping of all work areas and report any safety hazards immediately
• Perform and support other relevant duties and projects assignments if required

Responsibilities:

• Support global NPI (New Product Introduction) on product design and development.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-off and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.
• Overseas travelling may be required.

Requirements:

• Min. Diploma in Mechanical or Mechatronics Engineering.
• Proficient in using Solidworks software.
• Preferably with working knowledge and experience in taping machine, laser mark, jig & fixtures design.
• Positive attitude and self-motivated.

Responsibilities:

1. Prepare work packages and ensure spare availability prior to work commencement.
2. Prepare work packages and provide support to technical crew.
3. Liaise with technical crew and various departments to ensure smooth and timely completion of planned tasks.
4. Perform data input and analysis.
5. Plan and track monthly programs for completion.
6. Answer customer queries.
7. Any other duties required

Requirements:

1. Min NITEC or Diploma holder in Aerospace Engineering or equivalent
2. Preferably with at least 1 years of relevant working experience in aviation or related industry
3. Basic computer skill required
4. Knowledge of SAP will be an advantage
5. Comfortable with 12 hours rotating shift work arrangement

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

• Perform and certify aircraft maintenance tasks including inspection, repair, modification and functional tests

Required Skills

• Holds a valid Cat. B1 Aircraft Maintenance Engineer's License* with 2 or more of the following aircraft type ratings:

1. A330 (Trent 700/CF6)
2. A380 (Trent 900/GP 7200)
3. A319/320/321 (NEO/PW/V2500/CFM56)
4. B787 (Trent1000/GENX)
5. A350
6. B737- 600/700/800/900 (CFM56)
7. B737 MAX

• Holds a valid Company authorisation with 2 or more aircraft type ratings listed above
• Have at least 5 years of aircraft maintenance experience, with a minimum of 2 years of recent certification experience as an Engineer
• Holding a valid CAAS Part 66 (Cat. B1) Aircraft Maintenance Engineer’s License with the above-mentioned aircraft type ratings is advantageous
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

Job Responsibilities:

Infrastructure Support:

• Contribute to the design, implementation, and maintenance of the overall IT infrastructure, ensuring scalability and reliability.
• Collaborate with the infrastructure team to optimize server configurations and virtualization technologies.
• Participate in disaster recovery planning and testing to ensure business continuity.
• Monitor infrastructure performance and conduct proactive maintenance to prevent issues.
• Implement and manage storage solutions to meet the organization's data requirements.

Network Support:

• Administer and maintain the organization's network infrastructure, including routers, switches, and firewalls.
• Troubleshoot and resolve network-related issues, ensuring optimal network performance.
• Collaborate with offshore security teams to implement and enforce network security policies.
• Design and implement network upgrades and expansions to accommodate business growth.
• Perform regular network audits to identify vulnerabilities and recommend improvements.

WMS & Machine Integration Support and Maintenance:

• Participate in the implementation, maintenance, and optimization of the Warehouse Management System.
• Effectively supports & collaborates with cross-functional teams in optimizing the Receiving, Binning, Picking & Packing processes.
• Provide training and support to warehouse staff on utilizing the WMS effectively.
• Monitor, maintain & troubleshoot of machines, robotics, & automated systems to ensure smooth functioning.
• Collaborate with external vendors and internal stakeholders to manage machine repairs, upgrades, and preventive maintenance.
• Generate reports & insights to support decision-making for optimizing warehouse processes and machine performance.

Job Requirements:

Education

• Bachelor’s degree in computer science or computer engineering, or related discipline.
• Certification in ITIL, RHCE, CompTIA Network+, CCNA, Microsoft and network related will be an advantage.

Technical skill and Experience

• Minimum of 3 years of experience in IT, and MNC preferred.
• Proven track record in Tier two IT support.
• Hands-on experience in system (Windows, Linux) & network (Cisco, PaloAlto) support are preferred.
• Knowledge and experience in ERP or WMS is a plus.
• Sound knowledge in IP-Phone, SD-WAN, Aruba AP, will be advantage.

Collaboration and interpersonal skill

• Strong analytical and problem-solving skills.
• Demonstrate ability to work in teams with a collaborative interpersonal style.
• Good verbal and written communications skills with the ability to effectively document procedures.
• Proactive, fast learner and able to work independently.
• Able to speak proficiently in both English and Mandarin (to liaise with Mandarin stakeholders)

Core Responsibilities

• Follow up on behalf of MD for new customers enquiries & follow through on order confirmation
• Communicating with customers, making outbound calls to potential customers, and following up on leads as provided by MD
• Handle potential customers' enquiries and gather feedbacks/comments on product samples and direct to relevant departments
• Generate sales report & quotations
• Co-ordinate and handle admin for specific export shipments
• Any other ad-hoc task as assigned by the MD

Profile:

• Be proficient in both spoken and written English, can speak Mandarin & Bahasa
• High EQ & Customer orientated
• Diligent, good perseverance and follow-up skills
• Highly motivated & energetic
• Ability to manage multiple tasks/ projects simultaneously
• Have strong interpersonal, communications, negotiation skills
• Trustworthy, maintain confidentiality and handle sensitive information with utmost discretion and professionalism.

Other info

• Minimum poly diploma, Food Science or related
• Previous experience in a similar role would be preferred
• Salary: SGD 3,000 to SGD 3,500 depending on experience & suitability
• Daily lunch catered and paid by company
• Company bus from Tampines East MRT to company provided in the morning to work
• Office location in East, prefer candidates living in the East (Pasir Ris/ Loyang/Changi)
• Working hours: Mon to Fri (9am to 6.15pm) and once a month Sat (9am to 12pm)