Job Description:

• 5+ years of experience in software testing.
• Strong experience in web services testing using SoapUI or Postman.
• Experience in web application testing is required.
• Familiarity with automation testing using Selenium, Cucumber, or QTP is a plus.
• Hands-on experience in testing activities, with a willingness to write and execute test cases on a daily basis.
• Proficiency in at least one test management tool and one defect management tool is required.
• Experience in sanity testing, regression testing, and system integration testing (SIT).
• Knowledge of the Software Testing Life Cycle (STLC) and testing processes is essential.
• Good attitude and strong communication skills are required.
• Willingness to learn and adapt during the ramp-up period; must be able to become hands-on quickly.
• Exposure to Selenium automation development is preferred.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

*Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight-saving time in the year).

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

• Morning: 7am-4pm

• Afternoon:2pm-11pm

• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

• Performing all run activities in respect of the firm’s process, ensuring:

– SLA and priorities are respected

– Appropriate reaction, in line with the severity of an incident or escalation.

– Firm’s process are dully followed (service request, change, incident, problem management)

– Management of technical issues, escalations and ensuring good level of delivery

– Primary operational technical support and assist the functional support teams

– Good collaboration between various teams

• Continuous improvement of service

– Propose improvement and solution to reduce repetitive tasks

– Improving complex operations (DRP, Migrations, Major maintenance etc.)

– Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)

– Reducing time-to-market by implementing CICD pipelines where possible

– Improve and standardize existing workflow processes and framework

– Bridging the gap between Dev and Ops

• Managing knowledge within the team

– Share the knowledge within teams

– Promoting knowledge sharing within the organization (trainings, documentations etc.)

• Driving the most complex operations & ensures they are well prepared (involvement on DRP test, WIP, etc…).

– Act as global coordinator main events.

– Review of major releases roadmaps

– Ensure post checks are documented, performed and report is shared

Job Requirements:

– The position requires a minimum of 3 years relevant experiences as a production support or at least infrastructure support or development role.

– Experience in a banking environment is a plus.

– Minimum 3 years of experience with UNIX environments

– Minimum 3 years of experience in scripting languages such as Python, Powershell

– Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes

– Experience with task schedulers such as Control-M

– Good understanding of IT ecosystems and application architectures

– Knowledge about : CICD pipelines, ITIL practices, Agile practices, Lean, Observability tools such as Grafana, Kibana, Prometheus, or Dynatrace is a plus

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

A problem isn’t truly solved until it’s solved for all. That’s why Googlers build products that help create opportunities for everyone, whether down the street or across the globe. As a Technical Program Manager at Google, you’ll use your technical expertise to lead complex, multi-disciplinary projects from start to finish. You’ll work with stakeholders to plan requirements, identify risks, manage project schedules, and communicate clearly with cross-functional partners across the company. You're equally comfortable explaining your team's analyses and recommendations to executives as you are discussing the technical tradeoffs in product development with engineers.

Our goal is to build a Google that looks like the world around us — and we want Googlers to stay and grow when they join us. As part of our efforts to build a Google for everyone, we build diversity, equity, and inclusion into our work and we aim to cultivate a sense of belonging throughout the company.

Qualifications

Job responsibilities

• Manage network infrastructure capacity delivery programs.
• Solve technical issues revolving around network port capacity, physical cabling installation, network equipment capacity, project scheduling, and logistics.
• Bring technical experts together to communicate and help develop solutions.
• Manage and nurture relationships between cross-functional teams, including external parties/vendors.
• ​Identify process and communications breakdowns, while developing and driving solutions to remedy the issues.

Minimum qualifications

• Bachelor's degree in a relevant field or equivalent practical experience.
• 2 years of experience in program management.
• Experience with process improvement in the telecom or data center infrastructure space

Preferred qualifications

• Experience with data center, networking, or telecom operations.
• Experience working in organizational settings (e.g., shared accountability, geographic dispersion, ambiguity, etc.).
• Experience in Network, Electrical, Industrial, Mechanical, or other Engineering related field.
• Experience in co-location and large scale data center operations.
• Excellent investigative, quantitative, presentation, and problem-solving skills.

About the Power Generation & Energy – Senior Technical Consultant role:

In this consultative heavy role, you will be assigned to project teams to provide strategic, unbiased and objective advisory services to clients to assist them in solving issues, creating value, maximizing growth and improving business performance. You will also be responsible for contributing to and working on internal projects focused on the ‘Worley Consulting Way’.

Key Responsibilities :

• Collaborate with cross functional teams to deliver on key responsibilities in an assignment under tight deadlines.
• Draft written communication including reports, presentations, contractual letters and project plans.
• Ability to analyze technical problems and solve them without experiencing any stress. Experience in conceptual design of Power and electrical engineering systems and equipment’s is needed.
• Interview the client's employees, management team and other stakeholders as required for the assignments.
• Performa data/risk/business/financial analysis and integrate large volumes of data from various sources to create reports.
• Participate and contribute to client meetings.
• Produce plans and budgets relating to assignment management.
• Plan and manage some elements of an assignment - plan, time, cost, outcomes etc.
• Participate in the development of a safe and healthy workplace.

Key Skills and Competencies :

• Experience in the field of power generation design, techno-commercial evaluation of bids, proposals, tender submissions, Lender technical advisory role for project financial close as well project finance.
• Experience in Project execution in the field of power generation using gas to power, biomass fuels, renewables (wind / Solar / Waste to Energy), coal and for co-generation.
• Experience in supporting the development of Power Projects (Gas to Power, Coal, Biomass, Waste to Energy, solar and Geothermal), Lenders Technical Advisory Role with Banks for the successful completion of project financial close is preferred.
• Experience in Thermoflow modelling (for Mechanical) or Static and Dynamic Power System study (for Electrical) for grid connections is highly desirable.
• Experience in conducting technical design review with EPC Contractor for the implementation of power generation projects in Coal, Gas to Power, biomass, renewables (Wind / Solar / Waste to Energy) energy sector.
• Technical Support to project manager tender evaluation phase, subsequent negotiation phase as well as the project implementation phase on site including erection and commissioning.
• Experience in electrical equipment sizing and preparation technical specification for the various electrical equipment involved in the project.
• Experience in dealing with Chinese EPC contractor is preferable.
• Demonstrated flexible and adaptable approach and able to operate in different ways in different situations.
• Strong research and organization skills and ability to work independently and think critically.
• Excellent presentation, written and verbal communication skills.
• Confidence in dealing with senior people in organizations.
• A proactive approach to project delivery and business development.
• Collaborative team player and be able to demonstrate research skills.

Key Requirements:

• Degree in Mechanical or Electrical Engineering with 5 to 12 years of experience in Consulting, and/or EPC Contractor in reputed international organization
• Candidates with a double degree in engineering or experience with Renewable Energy projects will be looked favorably.
• Experience in providing project and business solutions to clients in the infrastructure and resources sectors highly preferable.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 11 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

SENIOR TECHNICAL MANAGER

As a Senior Technical Manager, you will be responsible for providing strategic technical architectural review and give direction to Architectural teams who are developing Construction and Authority submission documentation packages. You will also review and where necessary stipulate protocols to ensure maintenance of all architectural drawings, specifications and other consultants/contractors documentation in organized manner according to Office standards and individual client specific requirements.

Responsibilities:

• To lead technical aspects of a project and technical teams with respect to the preparation and submission of Architectural submission packages to local Authorities.
• Demonstrate ability to structure such Technical Submission packages in Revit
• To understand and lead project statutory submissions and controls and to ensure comprehensive compliance documents are prepared as directed.
• To establish and manage the CORENET interface for all submissions work
• To control and manage revisions of Authorities submission documentation packages to ensure consistency of Aedas deliverables.
• To take responsibility, where required by the project leader, for specific areas of the design and project development to meet the local statutory requirements.
• To assist in the process of coordination with external design team and other associated organizations or companies in view of collating the required inputs for the Authority submissions
• To assist Architects / Designers & Project Leaders in controlling the required changes to the Architectural documentation packages to align with the Authority comments and code requirements

Requirements & Attributes:

• Diploma in Architecture preferred
• Minimum 12 years of relevant experience in architectural draftsmanship and technical coordination and Management;
• Experience in large scale, hotel, mixed use development will be an advantage
• Familiarity with statutory submissions and controls, along with a strong understanding of local regulations and codes
• Experience in leading the preparation and development of Architectural submission packages to local Authorities;
• Proficient in BIM (Revit Architecture) preferred.
• Proficient in Bluebeam and Adobe (Photoshop, Illustrator, Indesign) preferred.
• Ability to self-develop and build colleagues to enhance team potential .
• Excellent communication and presentation skills
• Other professional certifications such as GMAP or GMAAP and UD Assessor will be an advantage

Please submit a copy of your updated CV including your current salary, expected salary and notice period to daisy[email protected].

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements.

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior/ Data & Machine Learning Engineer is a hybrid role focusing on developing our modern Lakehouse including pipeline development, and the deployment of machine learning models.

This position combines the responsibilities of a Data Engineer and Machine Learning Engineer, ensuring robust data pipelines and scalable deployment of ML models.

The role involves building data ingestion and transformation processes, deploying machine learning models, and working with DevOps and CI/CD for automated deployments and monitoring.

Collaborating with Business Analysts to ensure business requirements are translated into data solutions.

Working with Data Analysts to deliver accurate and reliable datasets that power impactful analytics and dashboards.

Partnering with other Data Engineers and Analytics teams (e.g., Quantitative Research team) to support advanced analytics and provide datasets for reporting and insights.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and translate this into technical analytical solutions.

Responsibilities

• Design and maintain data pipelines: Design, build, automate, and optimize ETL/ELT pipelines to support data flow, transformation, and availability across the Lakehouse platform.

• Collaborate on data storage and solutions: Partner with analysts to create scalable storage solutions, optimizing data structures for both analytics and ML applications.

• Implement data quality and governance standards: Establish monitoring and enforce data quality checks, ensuring data consistency, reliability, and compliance.

• Optimize and maintain model performance: Continuously monitor deployed models for performance, retraining or adjusting them as needed to ensure sustained accuracy.

• Deploy and monitor machine learning models: Design and implement CI/CD pipelines for model deployment, ensuring efficient and reliable delivery of ML models.

• Mentor junior team members: Guide and foster the professional development of junior data engineers, enabling their contribution to the team and ownership of project deliveries.

Expertise:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.

• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.

• Data Pipeline Development Skills: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.

• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.

• Python & Model Deployment Proficiency: Expertise in Python for deploying models and developing APIs for serving predictions.

• Spark & Azure Databricks: Skilled in using Spark on Databricks for processing large-scale datasets and supporting machine learning workflows.

Knowledge of:

• CI/CD Pipeline Creation (incl. for ML Models): Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines and machine learning models using GitHub and GitHub Actions with Databricks.

• Monitoring & Model Maintenance: Ability to set up monitoring tools for models, track metrics (accuracy, latency), and maintain model performance.

• IaC for Infrastructure Automation: Experience in automating cloud infrastructure management for consistent deployment and scaling using Infrastructure as Code tools like Terraform.

• Power BI Integration: Basic understanding of Power BI for creating visualizations of model performance and metrics for stakeholders.

• Agile Methodologies in Data Engineering: Understanding of agile frameworks to work within iterative sprints and collaborate with cross-functional teams

Experience:

• At least 3 Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.

• 1 Year in Machine Learning Engineering: Track record in managing the lifecycle of machine learning models, including deployment, monitoring, and retraining.

• Business & Data Transformation: Experience working in supporting business transformation and process improvement into Data-Driven organizations and systems.

• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Candidates with no prior experience will be considered for junior position
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

This is a for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Process Engineer (Backend) is responsible for development and establishment of production process.

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control. Review and maintain FMEA, Control plan, OCAP with cross-functional teams.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry
• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report

Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machines related to production
• Monitor process via SPC chart/real time monitoring system
• Work on continuous improvement projects
• Perform lots on hold and disposition
• Support in recipe setup and qualification for production
• Troubleshoot process-related issue
• Collect engineering data
• Prepare manufacturing documents
• Maintain good housekeeping in the production area
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines
• Process experience in Backend Process: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing
• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage
• Experience working in semiconductor manufacturing environment
• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc.
• Able to work under various shift pattern. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night

Process Engineer (Wet) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Wet process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

The Job

· Responsible for a full spectrum of shipping operations, contracts management and documentation;

· Handle full set of shipping documents for fast turnaround, shipment process, contracts allocations & vessel nominations;

· Handle shipment coordination with suppliers, buyers, shipbrokers, ship owners/agents, surveyors, insurance, etc., to ensure smooth loading and delivery;

· Liaise with banks on Letters of Credit opening, clean negotiations, and collection documentation;

· Work on SAP/ITAS/related system for invoicing and matching

· Follow up on shipping claims, demurrages/despatch, receivables, payables, clients aging accounts etc;

· Work closely with internal stakeholders (Commercial, Risk, Global offices, Finance, Accounts, Pricing, Chartering etc) to ensure execution risks are identified in advance and look at possible solutions;

· Proactively highlight and resolves issues related to the execution of the shipment;

· Adhered to company’s SOPs to ensure smooth execution;

· Manage other ad-hoc shipping or operational activities

Pre-requisites

· Experience in Rice will be given an advantage

· Must be able to work under tight deadlines with minimum supervision

· Logical and good in figures work as well as good analytical and interpersonal skills

· Diligent and able to perform under high pressure in a fast-paced working environment

· Meticulous and ability to multitask

Hardworking, good interpersonal skills, details orientated and team player

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Job Responsibilities:

1. Responsible for the secure operation and maintenance and development of the core transaction system database and related foundational platform systems.

2. Design and implement high availability solutions for databases to ensure 99.99% or higher availability.

3. Perform fault diagnosis and emergency response, analyzing and resolving database performance issues while accurately identifying root causes in a timely manner.

4. Optimize SQL, providing suggestions for improvement and optimization of problematic SQL queries.

5. Conduct forward-looking research on database technologies and promote their implementation and usage.

6. Provide technical consultation and system support services to project managers or system leaders.

Qualifications:

1. Over 3 years of work experience, including at least 3 years in dedicated SQL Server database operation management and technical support.

2. Proficient in using Performance Dashboard, SQL Profiler, and related diagnostic tools

3. In-depth understanding of indexing, physical and logical storage, execution plans, and blocking and deadlocking

4. Skilled in backup and restoration, DBCC, database clustering, mirroring, replication, and distribution, with a strong understanding of relevant Windows platform knowledge (clustering/AD domain). Candidates with experience in two or more database technologies, including SQL Server, will be preferred.

5. Familiar with Linux, Windows, IIS, SQL Server, Apache/Nginx, MySQL.

6. Knowledgeable about the architecture, replication, high availability, monitoring, and backup mechanisms of SQL Server and MySQL, with practical maintenance experience preferred

7. Proficient in SQL statements for SQL Server and MySQL, including writing stored procedures and designing table structures.

8. Detail-oriented, patient, calm under pressure, responsible, willing to research technology, and highly interested in DBA work, with good communication skills and a spirit of teamwork.

The Snr EUC Engineer manages the IT support function. He provides management to a group of IT professional and support staff and focuses on setting goals and priorities. He/She plans and directs the information processing activities of the organisation and coordinates the effective design, implementation and operation of management information systems and applications. He oversees the maintenance and upgrading of support systems and conducts on-site training to promote efficient operations.

Implement IT Support Service Plans

• Lead the implementation of support services across the organisation

• Define best practices and Service Level Agreements for the support function

• Establish performance and reporting measures to provide an effective and efficient level of service

Manage IT support Activities

• Identify actions to maintain or improve levels of service

• Advise the business on IT support metrics and capabilities

Oversee System Maintenance

• Prioritise activities to ensure continuity of service and prompt issue resolution

• Oversee the compiling of data for reporting purposes

• Review trends and patterns

• Plan installation of hardware equipment, software and maintenance agreements

• Recommend acquisition of new technology and software

Provide Incident Resolution Guidance

• Analyse enquiries to identify recurring user problems, recommend solutions, and to identify areas where service can be improved

• Respond to more complex, escalated enquiries from team members

• Evaluate results of investigation reviews

• Develop problem solving guidelines, checklists, or other materials to assist staff to respond to user problems that are recurring or routine

• Oversee disaster recovery planning and testing

Requirements:

• Have prior technical knowledge on End User Computing technologies, not limited to Desktop Endpoint Management, Win10 / 11 Security Patch Management, Asset Management, GPO policy management, Active Directory Administration, Win 7 / 10 / 11 migration (plus point), M365 administration (plus point), SCCM & Bitlocker (MBAM) administration (plus point), Software deployment management (plus point)

• Have vendor management experience or have experience managing subcontractors will be an advantage

• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Responsibilities

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.