SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Proficient in both oral and written English.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 8 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an SAP ABAP Engineer to be part of our IT Department diverse team of talent. You will be responsible to maintain and develop SAP ABAP Programs.

Responsibilities:

• Perform ABAP enhancements and changes for various SAP modules and interfaces
• Ensure ERP system complies with SOX security requirement and SOX audit execution
• Provide support to end-users requirements
• Assist in troubleshooting operational issues
• Drive continuous improvement in work processes and environment to achieve assigned section/department and/or company KPI
• Mentor and coach junior staff

Requirements:

• Candidate must possess at least a Diploma or Bachelor's Degree or Professional Degree in Computer Science/ Engineering/ Information Technology or equivalent
• At least 3 years of relevant experiences in SAP ABAP programing.
• Experience in SOX audit execution will be highly preferred
• Experience in Software Development Life Cycle Process
• Experience in SAP modules will be preferred

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Automation & System Department diverse team of talent. You will be responsible to setup, configure and provide operation support to PROMIS system.

What you will be working on:

• Setup, configure and provide operation support to CIM system.
• Investigate, analyze production line operation issue, develop solution to system related problem.
• Develop technical or training material as required.
• Involve in user/vendors discussion and brainstorming session.
• Analyze requirements, design, develop and test, implement, optimize.
• Document design specifications, user acceptance test and release.
• Analyze and implement improvement opportunity to enhance CIM system in support of business strategy.
• Provide cross-functional leadership (for senior position) and vendor interaction to troubleshoot, analyze and develop solution for problem involving integrated systems.
• Provide training to enable 1st line support equipped with appropriate knowledge/skill to provide frontline operation support for production.

More about you:

• Degree in Electronic Engineering, Computer Science, Information Technology or equivalent fields
• Familiar with dot.net
• Familiar with SECS / GEM Protocol will be advantage
• Database knowledge (SQL commands, data accessing etc.)
• Familiar with SDLC (Software Development Life Cycle) process will be advantage
• Good communication and self-driven
• Familiar with Elastic Search, Kibana, Logstash will be advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About the Team:

Our team builds the recommender system at Shopee, and strives to provide the best online shopping experience for our users. You will have the opportunity to participate in designing and implementing advanced technical solutions with high performance, availability and scalability. If you are passionate in technology, then we welcome you to join us to build a high-performing recommender system.

Job Description:

• Design and implement backend services / systems / tools used by our products and users
• Write high-quality, clean and maintainable code using engineering best practices (unit testing, source control, continuous integration, automation, design patterns, etc.)
• Analyse requirements, design and develop features in C++/Go
• Understand and constantly optimise our products, identify and fix problems, improve stability and user experience
• Design and implement distributed systems that are optimised for performance, scalability and availability
• Build reusable code and libraries
• Collaborate with fellow developers, product managers,designers, and operation engineers to build products with cutting-edge technologies

Requirements:

• Bachelor's or higher degree in Computer Science or related fields, graduating in 2024
• Passionate about coding and programming, innovation, and solving challenging problems
• In-depth understanding of computer science fundamentals
• Strong and hands-on experience with at least one of the programming languages: C++, Golang
• Familiar with performance tuning, massive concurrency handling, and caching mechanisms
• Familiar with Linux development environments and multi-threaded programming
• Experience and knowledge in dealing with big data (Hadoop/Spark/Flink) is highly preferred

ABOUT AirLab

The Aviation Innovation Research (AIR) Lab

The joint CAAS-Thales innovation lab known as ‘AIR Lab’ started to operate on 1st November 2019 with the objective to develop Proof of Concepts (POCs) or Minimum Viable Products (MVPs) of advanced and open technologies for future Air Traffic Management (ATM). Currently, the joint lab employs a team of 40 Thales engineers and 12 CAAS engineers and air traffic controllers operating in a vibrant ecosystem involving several Singaporean SMEs and start-ups, as well as key research institutes.

Thales engineers include 10 domain experts – with more than 10 years of experience – coming from Thales ATM centers of competence in France and Australia. These experts are coaching both the local Thales and CAAS engineers.

ROLE DESCRIPTION SUMMARY

As a Backend Software Engineer at AIR Lab, you will thrive if you have a passion for coding, designing, and engaging in discussions about APIs and data processing, including areas like data modeling, stream processing, and data quality control. You take pride in both the quality of your technical implementations and the overall delivery. You enjoy collaborating with a diverse team, bringing together various ethnic and cultural perspectives.

You are eager to dive deep into technical challenges, identify solutions, and effectively communicate your findings, helping the team learn and grow. You are enthusiastic about exploring new technologies and finding innovative ways to apply your knowledge. You also inspire and motivate your teammates to embrace continuous learning and take an active role in all aspects of engineering activities at AIR Lab.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSoftware Backend Engineer, you are accountable for:

• Design and build APIs to provide data for the stream-aligned squads.

• Implement features and associated automated unit and integration tests. If appropriate implement security and load tests.

• Improve and maintain the DataLake cybersecurity posture w.r.t data governance and cybersecurity standards by working with other stakeholders (e.g., Data Architect, Data Assessment Office, Cybersecurity Office).

• Improve and maintain the DataLake service levels for reliable data flow, health of infrastructure (i.e., compute and storage) and security.

• Improve and maintain the total cost of ownership of data; this activity includes raising efficiencies around FinOps, CloudOps.

• Improve and maintain the architecture transforming data between the DataLake and a distributed search and analytics engine (e.g., ElasticSearch).

• Lead the technical evolution of the DataLake by exploring new methods, techniques, algorithms (e.g., data meshes, AI/MLOps infrastructure).

• Work with the Data Architect to effect best practices to the engineering organization.

• Write and review the necessary technical and functional documentation in documentation repositories (e.g., backstage.io, JIRA, READMEs).

• Work in an agile, cross-functional multinational team, actively supporting the team's success.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Education

- Bachelor's degree in Computer Science or Information Technology with a minimum of 3 years of working experience.

- Master's degree in Computer Science or Data Science, if applicable

- Mid-career switchers are encouraged to apply if you demonstrate relevant working experience of at least 3 years.

Essential Skills/Experience

• Working knowledge of designing and building software applications using Java and/or Kotlin as a main programming language; a bonus is if you have experience designing and deploying RESTful and/or GraphQL APIs

• Familiar with development and deployment technologies for cloud (e.g., Azure Cloud, AWS, GCP), Kubernetes and container workloads (e.g., Kaniko, Docker) in general.

• Proficient in designing and implementing data processing and business Logic

• Demonstrated application of working with Continuous Integration and/or Continuous Delivery models; you are expected to be familiar with using Linux (e.g., shell commands)

• Proficiency in distributed source code management tools like GitLab, Github and practice GitOps

• Effective communication skills in English

Desirable Skills/Experience

• Working knowledge of designing application with a “shift-left” cybersecurity approach.

• Working knowledge of other languages (e.g., Python3, Scala2 or Scala3, Go, TypeScript, C, C++17, Java17)

• Experience in designing ETL or event-driven processing pipelines (with structured or unstructured data) using frameworks like Spark/ Apache Beam, Kafka Streams, Flink; proficient in deploying these data pipelines into Kubernetes cluster in Azure cloud either as virtual machines or containerized workloads.

• Familiar with cloud deployment models (e.g., public, private, community and hybrid) and service models (Software as a Service, Platform as a Service and Infrastructure as a Service).

• Familiar with designing and/or implementing AI/MLOps pipelines in public cloud (e.g., Azure, AWS, GCP)

Essential / Desirable Traits

• Possess learning agility, flexibility and pro-activity

• Comfortable with agile teamwork and user engagement

YOUR CAREER AT THALES

Future opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your competencies in different areas:

• Room and attention to personal development

• Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution.

• Choose between a technical expertise or a leadership path

• Build an international career within a leading Engineering Group

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description :

We are looking for a skilled and proactive AV/IT Engineer who can take the lead on AV/IT initiatives and offer expert advice on AV/IT design and project plans, ensuring project needs are met, maintain, and monitor project timelines, intervening when necessary, onsite installation, upgrades, troubleshooting, take ownership and coordinate with others to support daily audio visual technical requests. Supervise and assist in the setup, troubleshooting and maintenance of audio visual systems. Perform preventative maintenance to ensure equipment is ready for use. Identify defective or failed equipment and resolve issues as they arise. Compile and analyze weekly reports, incident reports, and service report submissions, networking, and other in-house projects at customer premises. Programming, and basic construction setups Manage, test, and commission necessary devices. Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Requirements :

*Pass experience with working with Telcos is a must.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 11 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

Responsibilities:

• Manage and control revisions of all documentation to ensure consistency of AEDAS deliverables as defined by the Team leader.
• Responsible for specific areas of the design and project development. where required by the project leader
• Assist in the process of coordination with external design teams, organizations or companies, managing its digital related aspects as directed.
• Prepare, develop and edit, under the guidance of the project leader or nominated architect, Sketches, Drawings, Models, Images, Specifications and other documents relating to a project or competition.
• Assist Architects / Designers & Project Leaders in controlling change i.e. Preparation of RVO’s and historical records reflecting change.
• Understand project statutory submissions and controls and to ensure comprehensive compliance documents are prepared as directed.
• Manage the CORENET interface for all submissions work.
• Understand and be familiar with the Singapore BIM standards and guides.

Requirements & Attributes:

• Diploma or Technical Certificate in Architecture/Building Construction
• Minimum 5 years relevant experience in architectural draughtsmanship and technical coordination;
• Proficient with the latest versions of AutoCAD, project information databases and specification writing;
• Experience in BIM and Revit will be an advantage;
• Construction drawings skills;
• Familiar with Singapore standards and e-submissions;
• Familiar with Singapore statutory requirements;
• Self motivated, organized and enthusiastic.

The Kindergarten and Elementary School seek enthusiastic and experienced Learning Support Assistant Teachers to join our growing inclusive Education and Therapy Team. The successful candidates will have a passion for inclusion and supporting all students to meet their potential. They will work with our Learning Support Teacher to provide intervention and support for students under the classroom teacher's direction. They will also be part of our wider team developing inclusive provisions and therapies.

This is an excellent opportunity to work within a growing team in an inclusive international school. You will have the chance to work alongside and learn from on-site professionals including Speech & Language, Occupational Therapy, and Social-emotional Learning Specialists

Position requirements:

As part of the inclusive Education and Therapy Team, you may work across the Kindy and Elementary Schools to support multiple students with wide-ranging needs and abilities. This may include direct work to support students on a 1:1 or small group basis.

Supervision of children on the playground. Some basic personal care and toileting duties.

Experience in an International School setting is preferred, but not essential

Experience in supporting children with mild-moderated additional learning needs and Autism is required. Where candidates have experience in supporting students within an Early Intervention model, this would be advantageous.

The role requires excellent communication skills, time management, and adaptability. You should be a patient and empathetic early educator who is passionate about providing a nurturing learning environment.

Working collaboratively and participating in the wider school community is essential. You will be expected to attend all staff meetings and professional development sessions as required.

Qualifications:

Due to the nature of the role, candidates with a background in Early Years Education, Special/Inclusive Education, and /or Teaching are preferred.

A minimum Diploma is required. Recent university graduates are also welcome to apply

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. With a minimum of 7 years relevant industrial work experience

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our CMP Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in CMP Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Diffusion Implant Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Implant Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!