• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Job Responsibilities

• Prepare drawings using AutoCAD, SolidWorks
• Liaise with staff in overseas factories and prepare technical product drawings for marketing purposes such as proposal cut sheets, installation drawings, user guides & instruction manuals
• Prepare technical product specifications/drawings for the purchasing team to communicate with the supplier and liaise with the supplier whenever technical information is requested
• Prepare multiple versions of designs for review by engineers and architects
• Document and file on 2D and 3D product drawings & renderings
• Implement changes to engineering drawings when necessary
• Other ad-hoc job duties as assigned

Job Requirements:

• 1-2 years of relevant working experience
• Completed minimum 1-year working/industrial attachment experience in construction-related or technical product field is a bonus
• Hold a minimum qualification of a Higher Nitec/Diploma in Mechanical Engineering/Design Engineering or equivalent
• Have prior technical experience in using AutoCAD, SolidWorks, or Rhino 3D candidates without formal qualifications will be considered
• Other software such as Photoshop, Illustrator, 3D Max, Revit (BIM), and SAP is an added advantage
• Be able to read architectural, structural, ID, and M&E trading drawings

Careers That Change Lives

Engineers are indispensable to achieving our Mission. That’s why we empower you to bring the best of your experience to bear on our market-leading portfolio of innovations. Apply your existing skills and develop new ones, with the training, mentorship, and the guidance you need to continue to develop your expertise. With roles in specific business units, as well as at the corporate level, you’re sure to find an opportunity to make an impact that’s right for you.

Today, we’re partnering across the industry to confront systemic healthcare challenges – this requires bold leadership. If you want a challenging, energizing, rewarding career that changes lives, join us. Help us bring the next generation of life-changing medical technology to patients worldwide.

A Day in the Life

• Quality Improvement Projects across the sites:Lead and execute improvement projects related to manufacturing quality. Collaborate with cross-functional teams to identify areas for enhancement.
  Drive strategic initiatives aimed at elevating product quality and compliance.
  
• Core Competency Development in Quality organization:Establish and strengthen the Quality Engineering (QE) core competency within the organization.
  
  Knowledge Transfer and Teaching:Effectively transfer quality concepts and best practices to team members.
  Mentor and coach junior engineers in quality methodologies.
  Expertise in Process Validation, Process Monitoring / Statistical Process Control (SPC),Test Method Validation (TMV, Risk Management. Data analysis and Critical Thinking
  
• System Understanding:Gain a deep understanding of how the system supports various processes within the organization.
  Leverage this knowledge to drive continuous improvement.
  
  Decision-Making Authority:Make informed decisions related to quality processes and improvements.
  Serve as a consultant for critical quality-related choices.
  
  Continuous Improvement:Continuously improve existing processes and systems.
  Develop and implement innovative solutions to enhance quality outcomes.
  
• Technical Mastery:Stay abreast of global quality excellence programs, industry trends, regulations, and advancements.
  Be a technical expert in quality engineering practices.
  

Must Have:

• Bachelor’s degree required
• Minimum of 6 years of relevant experience

Your Profile:

• Bachelor’s degree in Engineering or related field (Master’s preferred)
• Certified Quality Engineer (CQE), Certified Quality Process Analyst or equivalent would be an advantage
• Six Sigma Green Belt certification would be a plus
• Significant experience in quality engineering, preferably in the medical device industry
• Strong analytical skills, attention to detail, and problem-solving abilities

About Medtronic

Together, we can change healthcare worldwide. At Medtronic, we push the limits of what technology, therapies and services can do to help alleviate pain, restore health and extend life. We challenge ourselves and each other to make tomorrow better than yesterday. It is what makes this an exciting and rewarding place to be.

We want to accelerate and advance our ability to create meaningful innovations - but we will only succeed with the right people on our team. Let’s work together to address universal healthcare needs and improve patients’ lives. Help us shape the future.

Physical Job Requirements

The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role.

Description

PRINCIPAL DUTIES AND RESPONSIBILITES

• General Scope:

o Provide on-site technical support for PCs (software and hardware), voice equipment & mobile device (Smartphone and Tablet)

o Physically set up computers and software system installation

o Perform basic hardware moves and changes

o Record and manage all incidents and requests in ticket-tracking system

o Ensure timely resolution of issues by acquiring necessary information to best measure impact to the customer

o Develop and update new and existing process

o Proactively inform management of trends, significant problems and expected delays

o Provide other IT-related support as required by the business

o Documentation of products support and processes

o Update and manage inventory on new incoming hardware orders

o Communicate with vendors for incoming hardware orders and repairs

• Project Focus:

o Resource will need to assist users to migrate BYOD (Bring your own device) to CP (Corporate phone) where device platform includes iOS and Android

o Support includes but not limited to, assist user to setup new phone, troubleshooting during migration, get user sign off to show work completion, inventory tracking and reporting

Qualifications

LANGUAGE

• English: Advanced level - strong verbal, written, listening communication experience

EXPERIENCE

• 2 to 5 years of IT support experience

• Solid understanding of PC hardware/peripherals

• Exposure of mobile OS such as Apple iOS and Google Android

• Good working knowledge and IT experience supporting Microsoft Windows configuration, desktop administration, Microsoft Office suite

• Basic understanding of network and server-side infrastructure

• Experience in delivering superior customer service experience

SKILLS

• Ability to make sound decisions following approved procedures in a fast-paced environment

• Ability to effectively manage multiple tasks occurring simultaneously

• Ability to work independently with little supervision

Working Hours Coverage

COVERAGE HOURS

· Monday to Friday

· 9:00 – 18:00

· 8 working hour per shift defined by team manager within coverage hour above

· Extreme weather WFH/remote coverage

PAID OVERTIME WORK

· Required occasional non-office hours (weeknight, weekend & Holiday) paid overtime work on team rotation basis

With a global remit, our Technical Program Management professionals lead cross-functional product design teams to develop and introduce game-changing new products and solutions. It’s about making sure we offer customers the right features, experience, quality, schedule, cost, continuity of supply, service capability and financials. And when products and solutions are in development, it’s about driving everything from definition through to planning, development and launch across global development centers and multiple lines of business. The team is also crucial to getting shipping right. All in all, it is a fascinating and incredibly varied area.

Join us as a Technical Program Manager on our Displays & Client Peripherals Program Management team in Singapore to do the best work of your career and make a profound social impact.

What you’ll achieve
As a Technical Program Manager, you will drive the development and implementation of new and exciting product solutions within the extensive range of Displays and Client Peripherals products. Working closely with cross-functional team members, you will manage the entire lifecycle of the assigned product line that is critical to providing great user experience on our Client Peripherals products . From design to delivery.

You will:

• Manage end-to-end cross-functional, worldwide core team(s) for the Client Peripherals Line of Business (LOB), kicks off programs, establishes schedules and drives meetings. Cross Functional Team members can include Services, Engineering, Quality, Product Operations, Marketing, Procurement, Global Operations, Finance, etc.

• Lead the core team to meet or exceed program objectives (Cost, Quality, Schedule, Features, Fulfillment/Continuity of Supply, Solution delivery across products & service offerings, and Customer Specific Needs); Establish clear objectives and deliverables on programs that support the business strategy for the LOB; Proactively respond to risks and challenges through effective contingency planning and appropriate escalations; Track progress, reports status and drives necessary changes to achieve program objectives; Establish strong working relationships and influences/persuades at the Manager, Director, General Manager, Vice President, and Senior Vice President levels.

• Communicate clearly, accurately and concisely with required depth, and facilitate effective decision making at core team to leadership business review forums

• Prepare core product design team and extended teams for internal and external ISO Audits to maintain ISO Corporate Compliance.

• Participate in non-product or solution cross-LOB initiatives, examples include Process Improvement projects, Digitalization Tools implementation and Resource sizing/planning.

Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:

Essential Requirements
• 10–15 years of related experience in product development processes, product/solution areas or business consulting
• Strong track record in managing cross functional teams to clearly define the product/solution objectives, deliverables, opportunities, challenges and the required actions to achieve the defined objectives, at regional and global levels
• Capability to clearly communicate both technical and business matters, and influence decision makers

Desirable Requirements
• Bachelor’s degree

Who we are

We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.

Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.

Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.

Job Description & Requirements

• To study and familiarise with the whole development’s organisation, Site conditions, Conditions of Contract, Conditions of Sub-contract, M&E Specification/Drawings, Architectural, Interior, Structural and Specialist drawings, Coordination of M&E, Architectural, Interior, Structural and Specialist elements
• To carry out site supervision and inspection cords of all works done, including records of test inspections, status of workof the works including any off-site manufacturing as instructed by the consultant team so as to ensure that the installation works are constructed in compliance with the design intent, specification, working/approved drawings and quality of works required under the terms of the contract.
• To ensure timely submissions and check all drawings (including authority submission drawings and shop drawings)
• To monitor project progress of the works on site and at any off-site manufacturing facilities and report delays immediately.
• To provide standing supervision as and when directed by the consultant team.
• To maintain proper site records and updated daily res, safety, site diary, materials and equipment onsite, labour, dayworks, provisional quantities, etc.
• To check that the contractor executes preliminaries items.
• To check services routes and contractor’s setting out and report any deviations to the consultant team.
• To verify reports and monitor the progress of work on site, verify the contractors’ progress report and present the report to the DM (Development Manager) in such format that the progress payment claim by the contractor can be easily evaluated.
• To monitor all variations works as instructed or approved by consultant team.
• To attend site progress meetings/technical meetings/consultants’ meetings.
• To attend to contractor’s queries and co-ordinate works of main contractor and direct contractors.
• To inspect completed works and ensure works are carried out in accordance to statutory requirements
• To undertake any other duties related to the project including supervision of M&E works as and when instructed by the consultant team.
• To compile relevant equipment, material, inspection and test certificates submitted by the contractors and pass them to the DM as required for the project records and the clients’ hand-over package.
• To compile Punch List or Defect List with the contractors and ensure that the contractors carry out rectification work diligently to clear all defects during the Maintenance Period.
• To witness all the inspection, testing and commissioning sessions performed by the subcontractors to ensure compliance with designs and specifications.
• Project duration approx. 26 month

Job Requirements

• Possess at least a recognised Diploma/Nitec in Electrical and/or Mechanical Engineering/ Building
• Preferably Registered resident technical officer with IES / ACES
• Minimum 5 years of experience as RTO on local project,.
• A good team player and experience in assisting the consultant team / Resident Engineer in supervision.

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s

expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet

targets

• Preparing cost estimates and ensuring appropriate materials and tools are available

• Providing technical advice and suggestions for improvement on particular projects

• Diagnosing and troubleshooting equipment as required.

• Negotiating with suppliers and vendors to ensure the best contracts.

• Authorizing technical drawings and engineering plans.

• Attend technical meeting with authorities and consultants

• Ensuring environmental, safety, and health practices are carried out at all times

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· 3-5 years of relevant working experience

· Lighting experience is not necessary but would be an asset with experience in lighting control

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.

Make the Best You.

Working at Honeywell is not just creating incredible things. You will have the opportunity to work with our talented and friendly team of professionals and be part of a global team of future shapers.

Join Us and Make an Impact.

As a Field Service Engineer at Honeywell Singapore, you will play a crucial role in the on-site installation, servicing, and repair of complex equipment and systems. This position requires a blend of technical expertise, customer-facing skills, and a commitment to continuous improvement in field service processes and product development.

Key Responsibilities:

Support On-Site Installation and Repair:

1. Lead the development and refinement of processes for the installation, servicing, and repair of complex equipment on customer sites.
2. Ensure high-quality technical standards are maintained during all on-site activities.

Technical Presentations and Training:

1. Deliver technical presentations to customers, industry peers, and competitors.
2. Contribute to the creation and revision of work instructions and customer-facing training guides.
3. Educate customers and field technicians to ensure a comprehensive understanding of our products and services.

Documentation and Communication:

1. Write and maintain clear, concise documentation used by field technicians.
2. Utilize excellent written and oral communication skills to effectively convey information.

Continuous Improvement Initiatives:

1. Drive initiatives aimed at improving processes related to field services and product development.
2. Actively seek feedback and implement strategies for service enhancement.

Cross-Functional Support and Escalation Management:

1. Work with cross-functional groups to resolve administrative issues related to equipment delivery and installation.
2. Serve as an escalation point for Field Service Specialists, Service Engineers, and other stakeholders to ensure swift resolution of complex issues.

Customer Service and Delivery:

1. Validate customer requests and ensure the Right and Fast Delivery of services. Uphold a commitment to excellent customer service throughout all service activities

MUST HAVE:

• Major in Chemical Engineer, Electrical Engineering, or Instrumentation Engineering.
• Internship and/or relevant experiences in Oil & Gas, Petrochemical, Process Plants.
• Ability to work with clients in Jurong island area.
• Ability to standby and support upon request.
• Excellent written and oral communication skills.
• Ability to provide quality documentation and effective training materials.
• Ability to deliver high-quality presentations.

WE VALUE:

• A proactive approach to problem-solving and process improvement.
• Team players who can collaborate effectively with diverse groups.
• Individuals who are passionate about delivering exceptional customer experiences.

​

About Us

The world is changing. And it’s a familiar story at Honeywell. Our $36 billion business was founded on a legacy of firsts spanning 130 years. We’re building a safer, smarter, and more sustainable world through our technology and software across each of our 930 sites globally. Our impact is seen in every shape and size around the world. Our solutions are felt daily in aerospace, buildings and cities, retail, chemicals and materials, safety, industrial and manufacturing, safety, and supply chains.

Discover More

We’ve been innovating for more than 100 years and now we’re creating what’s next. There’s a lot more available for you to discover. Our solutions, our case studies, our #futureshapers, and so much more. Learn more at careers.honeywell.com/us/en/

If you believe what happens tomorrow is determined by what we do today, you’ll love working at Honeywell.

The future is what we make it. So, join us and let’s do this together.

1. Coordinate by managing schedules, filing important documents and communicating relevant information

2. Ensure the adequacy of stocks planning

3. Respond to complaints from customers and give after-sales support when requested

4. Monitor the sales progress, forecasting, prepare sales reports, report account progress, quarterly report.

5. Handle the processing of all orders

6. Inform clients of unforeseen delays or problems

7. Prepare, organizing of Promotion Plan, Execute accordingly

8. Manage all distribution channels clients on products.

9. Taking Orders and other Ad-Hoc Duties

Job Description:

• Perform in-house and onsite system maintenance tasks related
• Able to do troubleshooting for both hardware & software
• Able to support engineering department activity, daily operation and ad-hoc tasks
• On job training provided
• Willing to be deployed overseas to support maintenance work as required

Requirements:

• Minimum Diploma in Engineering or related technical field with 2 years experience
• Preferably possess Class 3/3A Vehicles license
• Positive attitude and able to work with cross functional teams
• Candidate without prior experience will also be considered
• Able to perform 24/7 standby
• Only Singapore citizens need apply

[Order Number: 623341]

Responsibilities:

• Design and implement motion prediction, decision making and motion planning solution for self-driving vehicle
• Driving scenario analysis, Software-In-the-Loop simulation, behaviour/strategy design and motion planning
• Algorithm implementation and software validation
• On-road performance verification
• Code review
• Write professional design and technical documents
• Other ad-hoc duties as assigned

Requirements:

• Good programming skill on C++, with 3+ years software development professional experience
• Good knowledge on robotics decision system, e.g., Finite State Machine, Behaviour Tree, Expert System, POMDP etc.
• Familiar with path planning algorithms, e.g., A*, D*, RRT etc.
• Familiar with common DNN methods, understand typical network training process, and experience on at least one deep learning framework (pytorch/caffe/tensorflow)

To Apply, please kindly email your updated resume to [email protected]

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Gary Ho Cheng Xuan
EA Personnel Reg. No.: R1549767
EA Licence No.: 07C5771

Responsibilities:

• Responsible for projects management, planning and the design of electrical building systems
• Meeting clients & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Conduct analysis and selection of systems, evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as coaching and lead junior staff
• Responsible for making e-submission to authorities for utilities services and related building regulatory submissions

Requirements:

• Degree in Electrical Engineering accredited by Professional Engineer Board, Singapore
• Minimum 5 years of experience in the industry
• Able to work independently with minimal supervision
• Singaporean only

Job Description

• Tracks sales data of companies in the Asean & Oceania region
• Researches competitive products by identifying and evaluating product characteristics, market share, pricing, and advertising; maintaining research databases
• Tracks product line sales and costs by analyzing companies in the Asean & Oceania region
• Monitors budgets by comparing and analyzing actual results with plans and forecasts of companies in the Asean & Oceania region
• Supports management by providing sales data, market trends, forecasts, account analyses, and new product information
• Supports management by organizing regional meetings, and preparing regional reports
• Liaises with global manufacturing plants for the supply of goods
• Centre of contact between Japan Global Business Headquarter and Regional Business Headquarter

As a Lecturer, your contributions go beyond teaching and facilitating learning. You will play a critical role in recognising and nurturing your students’ potential and their lifelong learning needs.

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

Requirements

You should be a Registered Nurse with at least 3 years post-registration clinical experience. Experience in clinical teaching and a specialist qualification in any of the following nursing speciality will be an added advantage:

- Midwifery

- Oncology

- Psychiatry

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Job Purpose:

Assist the development of the SQE department by contributing to the daily QA operation and maintaining the high level of efficiency for all new models and engineering changes. Provide strong impetus to support continuous improvement in view of meeting all relevant KPIs for the company. Provide a framework with clear structure to build on the need to standardise and implement systems for greater clarity and efficiency. Focus on ensuring that good quality is evident in all aspects of production and serving as the extra confirmation for client products.

Key accountabilities:

1. Review the daily operation activities in the control for quality aspects.
2. Focus and ensure that the in process and outgoing quality metrics are met.
3. Execute the scheduled projects within the approved time frame.
4. Prepare and execute WI for the lines and provide training for the operators.
5. Prepare the engineering evaluations for DOE for new engineering changes.
6. Perform daily, weekly and monthly reporting to the customer and management.
7. Perform QA functions and conduct quality investigations and provide CAR.
8. Conduct client's audits and provide CAR for audit findings.
9. Provide and analyse daily line quality KPI and provide improvement plans for the quality aspects on the line.
10. Provide Customer Satisfaction reports on a monthly basis and provide solutions for quality and time factors.
11. Reconfirm and serve as the final judge for all inspection guidance issues seeking customer approval if necessary.
12. Complies with all safety policies and procedures.

Knowledge, Skills & Experience:

1. Degree or Diploma in Engineering (Mechanical or Electrical).
2. Fresh-entry or 1 year experience with quality background.
3. Strong analytical, negotiation, communication and presentation skills.
4. Excellent interpersonal skills with a high level of self-confidence, drive and motivation.

Find Out Even More At: https://tinyurl.com/mindflex-fulltime

Office Location: 28 Sin Ming Lane, Midview City (Bright Hill/Marymount/Bishan MRT)

Quick Apply: You may send your Resume/CV to [email protected] or apply via MyCareersFuture.

About Us:

MindFlex Education Pte Ltd is Singapore's #1 Education Agency. Our team is highly focused on bringing the best value to our clients, whilst building an enjoyable and vibrant office culture. Cultivating and caring about our personnel remains at the heart of our company. We promote a fun-filled family-like environment with strictly no office politics and no overtime culture.

We are currently expanding and looking for fresh & energetic talent to join our team. If you are a great team player with a good sense of responsibility and work ethic, do apply to this posting and we would love to get in touch with you!

Job Scope:

- Handle Day-To-Day Business Operations of Singapore's #1 Education Agency

- Attend to interested clients via various forms of warm leads (form orders, calls, WhatsApp...etc)

(no cold-calling or anything of that sort!)

- Assist clients in shortlisting and recommending suitable tutor profiles based on their criterias

- Coordinate and arrange 1st tuition lesson for clients and tutors

- Follow-up with any necessary administrative support and after-sales service

- Familiarize with and utilize custom-made company software which is focused on automation

Job Requirements:

- Friendly, Passionate and Energetic Team Player

- Organized and Good Administrative Skills

- Responsible and Strong Work Ethic

- Decent Typing Speed and Computer Skills

- Polite, Patient and Calm Personality

- Able to Commit for Minimum of 1 Year

- Poly & University Fresh Graduates are welcome, no experience required

Salary:

- Competitive salary structured towards helping employees grow with the company

- $2,800-$4,300/Month + CPF (inclusive of team incentives)

- Base starts from $2,500-$3,500/Month

- Attractive regular team incentives from $300-$800/Month

- Clear Salary Progression, Annual Salary Review (Minimum 5-10% Increase)

- Management positions start from $4,000/Month base salary (for candidates identified with leadership potential)

Working Hours:

- 4 Weekdays, 1 Weekend OR 3 Weekdays 2 Weekend

- 9.00am - 6.30pm

- Strictly No Overtime and No Bring-Work-Home Culture

Why Choose Us:

- Fun Working Environment

- Casual Working Attire, Relaxed Setting

- Spacious Office with Modern & Fun Entertainment Facilities (Pool Table, Playstation 5, Karaoke Set, Board Games...etc)

- Company Meals / Outings / Events / Bonding Activities

- Full Leave Benefits: PH, Annual Leave, Sick Leave

- Strictly No Office Politics / Drama

- Great and Enjoyable Company Culture

- Career Progression and Extremely Low Staff Turnover Rate

- New Bright Hill MRT (Brown-Line) at Doorstep of Office

Others:

- Shortlisted candidates will be contacted for a short interview over Zoom or Face-to-Face

- Signing of Non-Compete contract will be required upon successful employment

1. Overall responsibility:

- Installation, repair, maintenance of medical equipment in Singapore

- Supports the Sales Team with technical information and customer calls as needed

- Provide technical information for pre-bid and tender specifications

- Completes timesheets within the allocated timeframe

- Available for travel for training overseas

2. Consults with

• Directors

• Administrator

• Product Managers/Engineers of Principals

3. Capabilities

- Communicates effectively,

- Resourceful,

- Can work independently,

- Desire to upgrade technical and interpersonal skills

- Prompt customer response

4. Qualifications

• Electric & Electronics Engineering Certification or Equivalent

• Basic knowledge of PC, Windows & Microsoft Office

• Good communication, reading, writing English

Job description

• Troubleshooting security and network problems.
• Perform vulnerability assessment using automated tools and recommend actionable follow up to remediate the vulnerabilities and/or threats uncovered.
• Provide maintenance support for security systems and tools, including firewalls and other security technologies, as per the maintenance contract requirements.
• Perform system upgrades, patches, and backups to ensure the security systems are up-to-date and running efficiently.
• Provide incident response support, troubleshoot security incidents, and work closely with end users to resolve issues in a timely resolution.
• Proactivity monitoring, support and troubleshoot network bandwidth capacity and network performance to ensure uninterrupted services.
• Manage and maintain Cisco ISE for network access control and policy enforcement.
• Coordinate and manage local and regional ISP on maintenance, changes, and implementation of WAN (SD_WAN).
• Report network operational status by gathering and prioritizing information and managing network projects.

Requirements

• Diploma or Degree in IT or Computer Science
• Min 4 years of relevant experience in IT Infrastructure and Operations Automation Experience
• Knowledge of regulatory requirements and security compliance standards relevant to network infrastructure.
• Professional Certification and at least 4 years’ hands on experience in routing & switching - good to have CCNP.
• Professional Certification and at least 4 years’ hands on experience in network security - good to have PCNSE (Palo Alto).
• Professional Certifications and at least 2 years hands on experience in Cyber security and optional CEH, SSCP, ISC2, Microsoft Security Fundamentals (good to have)
• Any relevant Microsoft cloud security certifications (AZ-500, MS-101, MS-500)
• Good Understanding of network and security fundamentals (Concepts, Protocols. Troubleshoots).
• Experience with Windows Defender Advanced Threat Protection and latest Microsoft E5 Security Product set
• Experience in testing and evaluating Security products in a Lab environment.
• Ability to manage multiple priorities and work independently.
• Positive and professional working attitude, ability to work as a team or individual under stress with minimum supervision and deliver on tight deadlines in fast-paced environment.
• Hands on experience in one or more of the following technologies as below:
• Routing/Switching – Cisco, Meraki
• Network Security – Cisco ISE
• Firewalls/Proxy – Palo Alto, Cisco, Zscaler
• WAN – VeloCloud
• Cloud - Azure

MSI Global Private Limited is a wholly owned subsidiary of the Land Transport Authority of Singapore. It provides professional land transport consultancy, engineering services, and solutions in Singapore and many other parts of the world. The Company also owns a subsidiary in Shanghai.

We are looking for highly motivated, results-oriented team players to join us as professional partners to strengthen and realize our vision, mission, strategic thrusts and core values.

Job Responsibilities

The candidate (Test Engineer) is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle, including test planning and analyzing business and system requirements.

The candidate will also be responsible:

• Preparing the test environment and designing and developing the test cases.
• Preparing the test environment and executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects and address test gaps to ensure test efficiency.
• Develop design documents and user manuals that effectively describe and provide clear instructions on the test automation solution to the end users, including testers and stakeholders.

Requirements:

• Tertiary qualification in Information Technology or Engineering
• Knowledge of testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity with the full system development lifecycle from requirement, and development, to testing and deployment;
• Good written and verbal communication skills;
• Able to work well both independently as well as in a team;
• Knowledge of diverse test execution phases (Agile testing, System Testing, System Integration Testing, User Acceptance Testing);

(B-6)