An engineering company is looking for Mechanical Engineer/ Processing Engineer

Job description

• to perform design and project management
• - supervision of site installation
• - co-ordination with customer and contractor

Requirement

• - Diploma / Degree in mechanical or chemical engineering
• - 3 years of working experience in process and equipment design calculation, equipment selection, and layout
• - Good knowledge of piping, pressure vessel, and tank design

Assembly Engineer

The Assembly Engineer plays an important role in the manufacturing and assembly process. He / She will be in charge of designing and optimizing the work process to ensure requirements, manufacturing standards and safety aspects are met.

Job Description:

· Working in Mechanical and Electrical assembly environment

· Create CAD drawings based on requirements

· Generate and implement operating procedures and work instructions

· Participate in technical discussions to facilitate process implementation

· Design, optimize and ensure processes meet requirements for standards, safety and datelines.

· Provide technical and engineering skills to resolve operational issues

Requirements:

• Higher Nitec/ Diploma / Degree in Mechanical or Electrical/Electronics engineering with relevant experience
• Good skill in CAD
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures,flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL's Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

ROLES AND RESPONSIBILITIES

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works
• Managing, allocating resources and ensuring completion of E&I work orders
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site
• Planning and organization of some non-capital E&I project work, including plant shutdowns/ TAR works
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works
• Nominating and training Instrument/Electrical Techs capable of doing works well
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements
• Resolve any unexpected technical difficulties and other problems that may arise at any tim
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks
• Produce ITP’s with QC Engineer and Task Briefings
• Produce 2 week look ahead in conjunction with the Site Agent
• Comply with company procedures and legal obligations
• Promote and comply with environmental compliance
• Deliver the works safely and to deadline
• Promote best practice for Safety, Quality and Productivity
• Ensure work is delivered defect/snag free
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI .
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works
• Timely handover of works and Quality records without outstanding defects
• Production of accurate records, drawing registers and weekly Reports
• Must have good relationship with Site team & client technical representative .

TRAINING

• To understand on SAP transaction: Invoicing Plan, GR, Budget, Actual Manhours, MRMS, Costing
• Tender Process
• To know and understand REI core business
• Project PI
• To achieve 72 training hours per year

Safety

• Ensure Workplace in Safe and Healthy Environment
• Safe and efficient receiving,storage,issuing of goods
• Ensure No Slips, Trips and Falls environment
• Use correct lifting postures and techniques to prevent injuries

Responsibilities

• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime

Daily Task

• Daily Update of Project Progress to immediate superior
• Weekly report progress

Main Task

• Design and Update Electrical & Instrument system layouts, single line diagrams, control schematics equipment/material schedules and date sheets, control wiring diagram for control systems etc
• Drafts engineering documents for clients submission or for construction
• Tender proposal, drawing of Heat Tracing System
• Coordinates and cooperates with other disciplines on new process requirements, design interference check and design changes
• Adheres to ISO quality requirements in the execution of works
• Adheres to drawing checking procedure
• Performs electrical calculations on cable sizing, lighting illumination level, cable ladder/tray sizing etc
• Production planning and co-ordination of production activities to meet deadlines
• Do the QC on Electrical related items
• Prepare Engineering change form when there are changes in design
• Attend meeting with Sales personnel to Client office or Site
• Not authorize to sign any company documents during probation period
• Other Ad-Hoc duties assigned from time to time

• Daily Update of Project/Operation Progress to immediate superior
• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime
• Attend complete orientation, introduction of superior, JSJD, clear scope of work and necessary drawing or documents on First day of work on site
• Coordinate with client and other Contractors for the project interface activities
• Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met
• Managing project deliverables in line with the project plan
• Managing project scope and change control with commercial or without commercial impact
• Monitor and ensure supervisor plan and instruct and monitor in DWI
• *Monitoring project progress and performance
• Plan monthly works schedule and set productivity to be achieved
• Prepare MSRA
• Prepare Tender Review Checklist Part 1, 2 & 3, ATQ & Notice of Tender Inquiry & Tender submission
• Prepare Vendor/Sub-Contractor Pre-qualification document & check list
• Prepare and update MRMS
• Project Planning, Progress Reports and Claims
• Proposed training for worker on live cable handling
• Providing status reports to the management
• Request and plan min Two days in advance for full PPE (if applicable), schedule of SIC, site location and contact Personal on the first day of work
• Responsible & accountable to ensure compliance with company, regulatory and client's policies and procedures. Ensure local regulations policies and procedures are incorporated into the business unit plan
• Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data
• To fulfill and achieve higher weekly and daily target
• To monitor the progress of projects against planned
• To plan, monitor and ensure manpower, materials, equipment and tools are ready for day to day work activities
• To take on additional appointments from time to time assigned by the company's authorized officer, and carry out the duties of such appointment duly and diligently to enhance the company image and to improve the company's business opportunities
• To verify technical specifications for adequacy
• Update and report daily progress status and look ahead minimum 3days plan
• Working closely with main contractor and client to ensure the project meets the required needs
• Supervising the project at all stages and providing solutions to problems
• Collaborating with site managers, surveyors, engineers, site worker and other professionals

• Job function - 70% Admin 30% Customer Support
• Able to commence from Jan/Feb 2024
• Office located at Jurong East (3 mins walk from Jurong East MRT)

Administration - 70%

• Day to day administrative duties.
• Data entry, reporting and invoicing
• Manage calender and schedule of bookings
• Update spreadsheets and prepare monthly reports

Customer Support - 30%

• Answering phone calls and taking appointment bookings and etc
• Responding to Email and Whatsapp inquiries
• Attend to customers’ enquiries, and feedback  via phone calls, emails, and Whatsapp

Job Requirements

• Min GCE A' Level or Diploma in any discipline
• Fluent in English (Conversational and Written)
• Previous admin & coordination experience is an advantage.
• Detailed-oriented and resourceful.
• Possess good organizational skills and time management.
• Customer centric with good communication and interpersonal skills
• Competent in Microsoft Office, particularly in Word and Excel

If interested, please kindly send in your resume to [email protected]

Position Overview:

We are seeking a skilled IT Executive to play a key role in IT automated storage and retrieval machine projects, customer warehouse integration, and providing advanced support

In this role, you will contribute to project execution, deliver exceptional customer support, and ensure smooth Your technical expertise and customer-centric approach will be integral to our success.

Responsibilities:

IT Projects Implementation:

• Assist in software project implementation of warehouse automated storage and retrieval machine for customer, including supporting integration to customer ERP system, IT infrastructure and customers networks.

• Collaborate in setting up the machine, configuring software,

• Performing UAT/SIT,Software user Training for customer and internal staff, Software Go live support

• Document IT projects comprehensively, outlining processes, configurations, and outcomes.

• Conduct IT site visits to assess requirements, troubleshoot issues, and gather insights for improvement.

IT Service support:

• Provide remote helpdesk and onsite support services for customers, addressing their technical needs promptly and professionally.

• Be stationed onsite on scheduled days to offer hands-on IT software support and ensure customer satisfaction.

• Prepare detailed IT service reports for accurate tracking and analysis.

IT Tasks and Ad-hoc Duties:

• Undertake various IT-related tasks as required to support onsite customers effectively.

• Respond to IT ad-hoc duties assigned by the Supervisor, demonstrating adaptability and versatility.

Qualifications & Requirements:

• Minimum of a Diploma or higher in Computer Science, Information Technology, or equivalent field.

• Available to travel for support customer in Singapore & Malaysia

• A minimum of 3 years of hands-on experience in a similar position.

• Mandatory experience in software application support, with exposure to systems like inventory, warehouse management, ERP.

• Familiarity with basic IT infrastructure, server setup, and network troubleshooting.

• Effective communication skills to liaise with team members, customers, and vendors.

• Proficiency in escalating technical and customer inquiries clearly to technical teams and superiors.

Responsibilities:

Database Administration

• Act as the Subject Matter Expert for database-related services.
• Manage the daily BAU operation of database-related services.
• Carry out service monitoring, end-to-end performance correlation, and database performance optimization. Create, review and update system documentation and work instructions to enhance the efficiency of daily operations.
• Perform capacity planning to size database resources to meet the demands of application workloads.
• Plan, execute, and monitor backup schedules in accordance with business needs and data retention policies.
• Review database security, perform database hardening, and apply regular or ad-hoc security patches to ensure compliance with IT security policy.
• Coordinate/Support with application support teams to schedule database updates and upgrade databases with minimal business impact.
• Provide Level 2 support for database service-related queries.
• Perform incident escalation in accordance to escalation procedures.
• Coordinate with other functional teams in incident handling, and ensure incidents are resolved or work- around within stipulated SLAs.
• Contribute to or drive root-cause analysis.
• Ensure that all internal processes and procedures are up to date and in accordance with the company's directives.

Data Services Provisioning

• Perform requirement gathering with application support teams.
• Recommend appropriate data services and system capacity according to agreed requirements.
• Develop configuration policies to optimize security, performance, and availability.
• Set up data services according to policies and guidelines.
• Set up data pipelines for data analytics and dashboard initiatives.
• Coordinate with other functional teams to complete the work required to operationalize data services such as IP address assignment, DNS requests, firewall port opening and security scan, database onboarding, data pipeline creation, database monitoring, and database performance monitoring.
• Ongoing review and improvement of process flow, system, and processes through automation, innovation, as well as the adoption of new technologies.

Implementation of IT Initiatives and Solutions

• Provide feedback on the design of data services for new systems.
• Support execution of database services initiatives and business projects.

Requirements:

• A recognized diploma or degree in IT or related fields.
• Minimal 5 years of hands-on experience in systems and database administration in an enterprise or campus environment.
• Hand-on experience in administering MSSQL, Oracle database (10g and above), Oracle high availability technologies such as RAC and Data Guard, database performance tuning and troubleshooting, and database upgrades and migrations tools.
• Hand-on experience in data cleansing, data transformation, and data quality management.
• Hand-on experience in developing dashboards using data visualization tools e.g., Qlik Sense, Power BI and etc.
• Knowledge of MariaDB, MySQL, and PostgreSQL.
• Experience in Windows, and Linux variants, preferably Red Hat and Ubuntu.
• Experience in capacity planning, availability management and business continuity management.
• Experience in project management.
• Independent, highly motivated and a proactive team player who can work with minimal supervision.
• Excellent in written and verbal communication.

The following certifications while not necessary, will be an added advantage:

• Database Administrator Certified Professional for MSSQL/Oracle/MySQL
• ITIL Foundation Level
• Certified Professional in Data Analytics/Data Visualization/Data Virtualization/Machine Learning
• AWS/Azure Certifications

Job Responsibilities

• Manage and implement document control activities
• Audit and assure that manufacturing processes are capable of producing products that conforms to established requirements
• Manage non-conformance issues and implement actions to prevent recurrence
• Follow up on corrective actions to ensure quality issues are addressed and resolved
• Responsible for customers’ quality audits and inspections
• Prepare QA reports
• Ensure products meets customers’ requirements
• Conduct internal audits and enforce ISO Quality Management system within the organization

Requirements:

• Diploma / Degree in Quality Assurance, Mechanical, Electrical/Electronics engineering or equivalent with relevant experience
• Knowledge in ISO 9001, CP/CPK, SPC and 8D reporting will be advantageous
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures.
• Support in the planning of routine maintenance of production equipment.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor junior engineers and technicians in equipment operating concepts and maintenance techniques.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Support Plant EHS and quality initiatives and targets.
• Responsible for developing budgets and long-range plans based on company growth and future maintenance needs.

Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place systems, warehouse in comply with the Site Safety and GMP procedures to ensure good uptime and good MTBF.
• Responsible for support the equipment qualification and validation, such as walkdown, punch list commissioning, IQ/ OQ/ PQ for any new project.
• Responsible for execution of work order and record job performed via MAXIMO system.
• Responsible for writing Job Aids and Maintenance SOP writing, CCA and ER investigation.
• Manage and lead contractor, vendors and service providers to perform maintenance or project works.
• Responsible for Maintenance budge for area of responsibilities
• Lead and Take part in continuous improvement efforts/ projects.
• May act as delegate to the Engineering Manager when required.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor of Engineering in Mechanical, Mechatronic, Aerospace/aeronautical or related discipline
• Min 5 - 7 years of relevant experience, preferably in manufacturing plant
• Prior experience with packaging processes ideal
• Good communication and interpersonal skills
• Good team player and able to multi-tasks
• Able to react effectively to dynamic Manufacturing environment and able to work independently

*Kindly note this position is based in Tuas.

• Develops project objectives by reviewing tender requirements and specifications.
• Determines project responsibilities by identifying project phases and tasks; assigning team members to project tasks; sourcing quotations from suppliers.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes.
• Maintains project budget expenditure by controlling costs and expenses.
• Prepares project status reports by collecting, analysing, and summarising information and trends.

Requirements

• Class 3 driving license
• Diploma or Degree (Engineering)
• 3- 5 years’ experience in managing projects in Commercial Vehicle / Automotive industry
• Able to apply Project Management tools and methodology
• Proficient knowledge in Auto CAD software, Microsoft Office

Job Summary:

You will handle the IT helpdesk function , assisting users and also manage the servers to ensure it is always in good functional use . In addition, you will take care of the IT inventory and at times, be assigned to handle some IT projects under the guidance of you departmental head.

Pre-requisites:

• 3 years of IT Helpdesk ecxperience
• Diploma/Professional certificate in IT
• Patient and helpful personality
• Ability to multi-task

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Description

We are looking for an Application Engineer who enjoys interacting with customers and likes to work in an autonomous environment. In this position, you will manage and develop long standing client relationships, with an intense focus on exceeding client expectations and driving service delivery. You will have a hands-on approach to service and deliver value through developing and managing technical projects to solve customer problems.

• Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance and continuous improvement plans.
• Assist Sales Representatives with plant surveys of prospective customers.
• Assist Sales Representatives with start-ups of new applications in both existing customers and in new accounts.
• Develop strong relationships with the key stakeholders in the strategic district accounts where you provide service support to other District Sales Representatives.
• Provide technical support to customers; identifying and resolving customer pain points, escalating as required.
• Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels.
• Support services include: Water Chemistry checks, light maintenance, customer service, service report generation, chemical ordering, chemical inventory management and top-up.
• Follow Ecolab safety guidelines and incident reporting requirements.

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player

The role is primarily to support the Binnies Singapore office to secure and deliver the Coastal and Flood Risk projects in Singapore. In addition, the successful individual will require to provide support to UK offices to deliver their Flood, Coastal, and Maritime projects.

It is primarily a technical role involving participation in maritime and coastal related civil engineering projects and studies. The individual will require performing design tasks, various studies, engineering management, client liaising, and communicating with other teams and offices.

The individual may need to work as a coastal specialist working closely with the same discipline and other multidisciplinary teams. This is a great opportunity for the successful candidate to develop his/her technical and engineering management skills, particularly in various types of flood, maritime and coastal projects, and obtain international experience.

The key duties and responsibilities include but are not limited to:

• Design of coastal and coastal related structures
• Undertake various coastal studies
• Perform the projects/tasks within the agreed budget and programme
• Client liaising
• Attending meetings both internal external
• Progress monitoring & reporting
• Proposal preparation

Required Competencies

• CPD in the relevant specialist skill area
• BSc or MEng (Hons) Coastal Engineering
• Specialist knowledge of areas such as metocean studies, feasibility studies, Beach and shore management plan preparation, and detailed design
• Coastal engineering knowledge (tide, current, waves, wave overtopping, rubble mound structures, tidal and storm surge barriers, coast protection works)
• Sound knowledge of BS Maritime & Eurocode codes and industry-standard guidelines such as CIRIA and other relevant international standards and guidelines
• Performing calculations and desktop studies with limited guidance
• Project report writing
• Proposal writing
• Understands support needed by junior staff
• Team player
• Adaptable
• Experience work in multidisciplinary coastal projects
• At least 10 years of experience in planning, design and/or implementation of coastal, marine, reclamatin infrastructure projects
• Experience in project management in the planning, design and/or implementation of coastal, marine, reclamation infrastructure projects is a plus point
• Experience in client liaising and leading technical meetings

Education & training:

• BSc or MEng in Civil and Coastal Engineering
• A registered Professional / Chartered Engineer under the Civil / Coastal Engineering Discipline is a plus point

Background & experience:

• Post-graduation consultancy office experience

Knowledge base:

• Coastal engineering design & studies
• Knowledge of Eurocodes/BS 6349/CIRIA Guidelines

Skills:

• Site assessments
• Design of coastal structures
• Metocean studies and surveys
• Feasibility studies
• Good experience in using design software
• Excellent written and oral communication skills
• Client liaising
• Excellent interpersonal skills

Personal attributes:

• Proven ability to carry out design and other tasks reliably
• Always seeking improvement in design and delivery performance
• Recognises client needs and delivers solutions
• Self-motivated
• Willing to make international travel for both short and long terms assignments with a short notice.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

The CSV Lead Engineer will provide day-to-day Validation activities support in accordance with approved SOPs / Policies for a GMP Biotech manufacturing facility. The role supports Validation activities related to computerized system and is responsible to ensuring their integrity, compliance and efficiency from a Computerized System Validation (CSV) perspective. The CSV Lead Engineer, will serve as site CSV Subject Matter Expert and lead day-today and project CSV activities. The CSV Lead Engineer will provide recommendation for improvements to the validation approach and site operations. The role will also collaborate with other site functions to implement improvements projects.

Key responsibilities:

· Lead or support day-to-day Validation activities in accordance with approved Validation SOPs / Plan / Policies.

· Develop & execute Validation Protocols and Reports, including supporting site discrepancies and deviations investigation / closure.

· Participate in system design review to ensure compliance to user requirements, good engineering practice, validation requirements and regulatory standards.

· Review and approve of Validation Protocols / Reports including site discrepancies and deviations investigation / closure.

· Participate in Site Validation Maintenance Program.

· Develop Validation Plans for a small to medium scale change implementation project and ensure the validation execution activity meets scheduled timelines.

· Coordinate with other Engineering functions, End-User and Quality team to ensure the Validation activities are completed as planned and are compliant to user, Lonza standard and regulatory requirements.

· Review Engineering documents associated with commissioning and validation activities.

· Evaluate and propose improvement to equipment/system, processes and operations to improve safety and process efficiency.

· Review & assess Site Change Controls and Validation CAPAs.

· Participate in Customer / Agency Audits and Inspections as required.

· Participate in on-job training program for Validation staff and provide training to as required.

· Any other tasks as and when assigned by manager.

Key requirements:

· Bachelor Degree / Diploma with exposure in the Biopharmaceutical industry.

· Relevant work experience in Validation / Quality /Manufacturing unit in the pharmaceutical/biotech industry.

· Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, GAMP and ICHQ7).

· Good knowledge and experience of the practical and theoretical requirement of CSV program in a GMP facility.

· Good oral and written communication skills.

· Meticulous and Systematic.

· Team player, with strong focus on safety, quality and timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

JobScope

· Capable to produce P&ID, E/R arrangement, Shafting drawings

· Familiar with IMO, Class rules & regulation and industrial standard.

· Familiar with marine system and equipment

· Experience in marine vessel P&ID system design, equipment sizing and arrangement, propulsion and power generation.

Requirement

· Diploma/Degree in Naval Architecture, Marine Engineering, or relevant courses

· Preferably with 3 to 4 years Mechanical Field related to shipbuilding. Fresh graduate may apply and 6-months OJT will be provided.

· Able to do calculations, develop ship piping system, Engine Room Layouts, HVAC, Shafting, etc

· Advanced level skills in drafting and MS. Office (Excel & PPT)

· Possess good interpersonal and communication skills

· Able to multi-task and able to work in a fast-paced environment

· Applicants without prior experience are also welcomed to apply

*We regret that only shortlisted candidates will be notified.*

Key Responsibilities:

• Managing external electrical subcontractors to ensure that works are in compliance with class, drawings, installation procedures and quality processes.
• Reviewing and proposing to management the most suitable electrical and electronics equipment for newbuild vessels.
• Managing troubleshooting processes and root-cause analyses.
• Checking calculations and drawings for electrical and electronics systems and interfaces.
• Overseeing project documentation and liaising with class, regulators and clients.

Basic Requirements:

• Diploma / Degree in Electrical Engineering.
• Strong, knowledgeable and results-driven leader.
• Minimum 5 years’ experience in a similar capacity, preferably in aluminium high-speed vessels.
• Sailing experience in an engineer’s capacity would be an advantage.
• Working knowledge in programming, automation and PLC would be an advantage.
• Effective communication skills in written and spoken English.
• Proficient in relevant Microsoft Office programs, including Microsoft Project.

Others

• 5.5 days work week
• Two-way company transport provided to and from Boon Lay / Lakeside / Bukit Batok / Jurong East

Your remuneration will commensurate with your experience and qualification.
Your career advancement will depend on your attitude and contributions.
KEEP CALM AND JOIN US!
Interested applicants please forward your detailed resume to
Penguin Shipyard International
21 Tuas Road
Singapore 638489
Email: [email protected]
Only shortlisted candidates will be notified. Thank you.

Job Description

• Carry out works scheduling, material requisition, cost control, site supervision and documentation.
• To supervise the site works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works.
• To perform QA / QC role on area assigned and to ensure safety regulations are being compiled on site.
• Prepare various reports & RA (progress report, project handover report and etc.).
• Any other duties that may be assigned.
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements

• 2 years of relevant experience or fresh University/Poly/ITE graduate
• Mechanical Engineering
• Working location at Tuas

Responsibilities:

• Determine the scope based on requirements, including stating the scope of work, calculating the resources required in delivering the service and advising the senior system engineer preparing the quotation
• Install and configure services as per the approved implementation plan
• Carry out technology, professional and maintenance support services as per scope within the stipulated duration/ timeline
• Provide level 1 support (basic hardware break-fix & troubleshooting of hardware and software issues ) for installed services
• Provide technical deliverables such as high level design document, user acceptance test (UAT) doc and as-built documentation
• Provide outstanding quality of service and meet predefined customer service level agreement (SLAs)
• Undergo technical trainings and obtain technical certifications that are required to meet suppliers’ mandatory technical requirements
• Conduct knowledge transfer training (where required) 

Knowledge, Skills and Experience:

• Minimum 3 years of relevant experience
• Certified in at least one of the technology domain (Infrastructure hardware and software, hyperconvergence, network, security, cloud and/or end user computing)
• Strong technical knowledge on the assigned solution domain/product
• Knowledge of product portfolio in other technology domain is desirable
• Expertise in enterprise products implementation, migration and support.
• Strong interpersonal skills with a customer-centric attitude
• Strong oral and written communication skills
• Strong attention to technical details, priority management and planning skills
• Ability to work independently with little to no supervision
• Results-oriented
• Strong documentation skills

What’s In It For You?

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It’s not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

Don’t meet every single requirement? Apply anyway.

At Tech Data, a TD SYNNEX Company, we’re proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you’re excited about working for our company and believe you’re a good fit for this role, we encourage you to apply. You may be exactly the person we’re looking for!

1) Liaise with Customer for Software requirement and specification.
2) Design the Control & Software Structure, Programming, Testing, implementation and customer support
3) Prepare Machine Operation Manual and Documentation.
4) Work with Project Team for on time delivery of the project.1) Degree in Computer Science / Electrical / Electronic Engineering or equivalent.
2) Minimum 3 years' experience in Software PLC Programming for Omron / Allen Bradley and Siemens PLC.
3) Strong oral and written communication skills. Able to speak & write in English and Chinese in order to liaise with Chinese speaking associates.
4) Must be prepared to travel to jobs sites/overseas.
5) Goal oriented and working directly with clients and other professionals with minimum supervision.
6) Experience in AutoCAD for electrical drawings.
7) Full time position
8) 5.5 days working days

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Clash checking in AVEVA
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting,plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layoutand Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and oyther discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

• Plan and carry out preventive maintenance throughout the hotel to ensure that standards are maintained for guest comfort.
• Ensure the smooth daily operation in the department through supervision, delegation of duties and coordinate all engineering activities within the Hotel.
• Ensure the preventive/ corrective maintenance for all the hotel’s facilities are done promptly.
• Conduct routine checks and log data of all facilities, following up on faults and repair works if required.
• Perform property/ room preventive maintenance inspection and update.
• Perform incident investigation and prepares report.
• Assist in fire safety procedures within the Hotel
• Monitor the service and maintenance of all equipment and controls.
• Schedule preventive and corrective maintenance.
• Maintain the tidiness of the store, workshop and check on the tool inventory.
• Ensure that all spare parts are available for use whenever required and proper storage of supplies & materials.
• Maintain fire-fighting facilities and equipment in compliance to the Fire Safety regulation.
• Perform regular energy/ defect analysis and be involved in energy management.
• Keep up to date on safety-related administrative documents.
• Ensure his/her own safety and the safety of others during interventions and those of the external service providers.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by the local Council, Government and Manufacturer specifications.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Strive to honour the Accor Vision and demonstrate active use of Accor Values.
• Any other reasonable request within your range of competence as required by Management.

• Provide a high-level of support to our partners restaurants
• Understand the partner lifecycle and how the three verticals work together 
• Work closely with the wider Customer Success team to ensure goals are being met across our partner base in the APAC region
• Become a trusted advisor to our partner restaurants by helping them gain the most out of our platform and reach optimum value
• Maintain an expert level understanding of our product and service to clearly communicate the value
• Have a commercially minded approach to nurturing our partner base
• Proactively engage with partners to mitigate churn risk through early assessment of their use of the Quandoo service and product
• Be the voice of our partners to provide internal feedback on how we can improve