Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Controls COE is Looking for You

Halliburton invites qualified candidates to apply for a position with the Advanced Controls Center of Excellence (COE) in Singapore. Candidates with interests and background in control systems theory, robotics, mechatronics, dynamic modeling, or data analytics and machine learning are encouraged to apply. This position provides an opportunity to participate in a strategic research and development program shaping the industry’s future technology. By solving challenging technical problems you can have a rapid impact on a commercial market with significant revenue. Successful candidates are expected to perform original and relevant research and development to expand the group’s expertise and technology portfolio. The Advanced Controls COE at Halliburton encourages a culture of continued learning, inventing, and innovating by bringing together a diverse group of top-notch engineers and researchers. The group has a track record of developing advanced control and smart systems that are used to produce value around the world every day. Our goal is to continuously grow the group’s core research expertise in the area of control, robotics, dynamic modeling, filtering, data analytics, and machine learning to build advanced automation and control technologies and maximize the value of data to ensure the long-term success of Halliburton.

Responsibilities

• Conducting research and development in modeling, control, and data analytics for solving challenging problems in the oil & gas industry
• Contributing to the identification of high value problems and opportunities
• Participating in control system design, control system prototyping, and implementation
• Design smart systems to augment complex tasks
• Collaborating with team members and providing necessary support for technology transfer
• Publishing results in patent applications, technical journals, and conferences

Required Education and Skills

• A PhD (or equivalent experience) from Mechanical Engineering, Aerospace Engineering, Computer Science, Chemical Engineering, or Electrical Engineering with a focus on Control Theory and Applications, Robotics, Mechatronics, Machine Learning, or Data Analytics.
• Skills typically acquired through the completion of an undergraduate degree in Science, Engineering or similar discipline, and 2 years of related experience. Completion of a masters or PHD in Science or Engineering is preferred
• Experience and strong interest in solving practical problems, from invention to implementation in the field
• An excellent publication and patent record consistent with experience.
• Extensive knowledge in control theory, such as modern control, adaptive control, robust control, nonlinear control, optimal control, Model Predictive Control, etc., with outstanding ability to identify the proper control method for solving practical control problems and, when necessary, to develop new control methods, and/or
• Extensive knowledge and practical experience in the application of Data Analytics including machine learning techniques such as SVM, Neuro Network, Bayes network, Genetic Algorithms, etc., preferably with control applications, and/or
• Knowledge of robotic systems with high DoF control, path planning, mechatronics, or dynamic modeling of complex systems
• Demonstrated teamwork, strong communication skills, and collaborative in complex engineering projects

Preferred Experiences

• Worked with large data sets, unstructured data, structured data and supporting compute/cloud systems like Microsoft Azure
• Built tools/workflows and support structures needed to analyze data, perform data cleaning, execute feature detection and extract business value from data
• Developed models, control algorithms, workflows, & software for use in field operations.
• Leveraged data visualization software applications, such as R, Power BI, Spotfire or Tableau

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available

Job Responsibilities

• Sales and marketing of valves (Own and well known brand in the industry)Able to secure & generate sales of valves & Actuators to achieve company order targets
• Aggressive PIC for Sales Division who can develop new business(sales) from scratch & be able to conclude orders.
• Establish relationship with End Users, Contractor (Industrial Market, main Market is semiconductor, & petrochemical related) who use valves, gathering market information and expand sales
• Market survey of new business field and reporting
• Work closely and liaise with related divisions such as Sales Team, Warehouse, Engineering, Factories, Japan head office
• Properly understand the needs from customers and follow upongoing project
• Person in charge to communicate with customers if a claim occurs, and liaise with related divisions to solve the problem
• A highly dedicated, responsible & passionate person who can perform task accurately & promptly, and able to work under pressure by taking challenge.
• Ad-hoc duties by MD or GM.

Requirements

• Minimum 2 years’ experience related valves, actuators & similar industry in sales including planning sales approach
• Proactive attitude to analyze the current situation and change to better way
• Depending on the performance, this position could be the future Senior Manager
• Proactive attitude to hit the target and logical way of thinking, and to develop new business and sales channel
• Confident in communication
• General Skill in Excel, Word and Power Point
• Team Player
• Ownership
• Decisive, drive and ability to deliver effective, innovative solutions
• A person who has positive and can think and act for himself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication andinterpersonal skills at all levels
• Some understanding of Japanese is a plus.

Reporting Function

• Directly report to Sales General Manager

Roles & Responsibilities

Job Description

• Industry/ Organization Type: Marine Shipbuilding and repairs
• Position Title: Mechanical Engineer
• Working Location: Jurong West
• Working Hours: 6 days (Monday to Friday (8 AM - 6 PM) Sat 9am -1230pm
• Salary Package: Basic Salary up to $8,500 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment repairs, hands-on assembly, testing, troubleshooting, and supporting projects related to Scrubber systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the marine/mechanical industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at) [email protected] Kindly indicate #me on the email subject.

Zantra Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

Roles & Responsibilities

• Prepare final reports for Incoming, In-process and outgoing processes.
• Compile and ensure timely submission of Manufacturing Record Book (MRB).
• Verify external provider's documented information (Incoming or secondary processes).
• Investigate and prepare non-conformance reports.
• Implement and verify corrective actions and ensure compliance with requirements.
• Present NCR findings to Management and customer.
• Liaise with customers on Notification of Inspection schedule and Pre-production meeting.
• Conduct internal training and process improvement plan.
• Involve in quality audits (Internal or External).
• Assist QA Manager on all issues.
• Any ad-hoc tasks which may be assigned.

Requirements

• Diploma or Degree in Engineering. Preferably Mechanical.
• 3 years of working experience in oil and gas industry.
• Familiar with international codes and standards (ASME/ASTM/API).
• Understanding and interpretation of drawing.
• Knowledge in Welding, NDE, CMM and manual inspection will be added advantage.
• Fresh graduates are welcome to apply. Training will be provided.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job description

• Proactively engaging with customers on service sales and technical inquiries to support the sales team in meeting sales growth objectives and nurturing positive client relationships.
• Provides technical support during site installation, troubleshooting and testing & commissioning.
• Deliver in-house (phone/email) and on-site service support, as well as conduct demonstrations for potential customers.
• Provides technical support throughout site installation, troubleshooting, testing, and commissioning, including diagnosing issues, providing quotations, and processing purchase orders.
• Source and fabricate troubleshooting tools, as well as manage the ordering process to ensure spare parts availability and reordering when necessary.
• Prepare documentation for repair cases as required and assist with payment issues related to repair orders.
• Enhance service revenue and expedite repair process turnaround time (TAT), while also managing warranty claims for both local and overseas customers.
• Keep the repair/workshop area tidy and orderly, ensuring that demo equipment remains in operational condition.
• Perform any other duties as assigned from time to time.

Requirements :

• Minimum a Higher NITEC qualifications.
• Preferably with at least 3 years of commercial experience in the Electrical/ Electronic industry. Fresh graduates are welcome too.
• Good understanding of Standard Electrical Schematic Diagrams, and able to perform System, Hardware Testing & Troubleshooting.
• Knowledge and practical use of standard vacuum technology practices is an advantage.
• Service-minded with passion and patience for handling customers.

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

As a Technical Sales Engineer, you will be the technical expert on SESTO Robotics' products, helping customers, partners, and integrators effectively integrate our Autonomous Mobile Robots (AMRs) into their specific applications.

Working closely with the engineering teams, your role will involve addressing customer challenges by offering tailored solutions that showcase the value of our products. You'll guide customers through the adoption process, ensuring seamless integration while providing technical know-how and driving successful implementations.

Specific Responsibilities:

1. Identify and Qualify Sales Opportunities:

- Actively identify and qualify new leads through market research, networking, and outreach activities.

- Assess customer automation needs and pain points to propose suitable Autonomous Mobile Robot (AMR) solutions, including payload and application-specific requirements.

2. Sales Strategy and Pipeline Management:

- Manage and monitor the sales pipeline, forecast revenue, and track performance against targets using CRM tools.

- Collaborate with cross-functional teams like Engineering, Marketing, and Customer Success to drive sales efforts and ensure alignment with customer needs.

3. Technical Proposal Development and Documentation:

- Create technical proposals, cost estimates, commercial offers, and tender documentation in consultation with internal technical teams.

- Address technical and commercial queries from customers to ensure clear understanding of proposed solutions.

4. Proposal Presentation and Negotiation:

- Prepare, present, and negotiate proposals, quotes, and contracts, ensuring all payload and application requirements are met.

- Negotiate terms and conditions with customers to ensure alignment with company policies while securing favorable agreements.

- Handle objections and challenges to close deals effectively.

5. Customer Relationship Management:

- Build and maintain strong relationships with key decision-makers and stakeholders in target accounts.

- Conduct meetings, presentations, and product demonstrations to highlight the benefits and value of AMR solutions.

- Serve as the main point of contact for customers, providing post-sales assistance as needed.

6. Collaboration with Technical Teams:

- Work closely with technical experts to develop tailored solutions and presentations that meet customer requirements.

- Utilize technical insights to strengthen the value proposition and enhance the competitive edge of AMR solutions.

Requirements:

• Ability to read mechanical drawings
• Ability to read basic electrical schematics
• Basic programming skills preferrably in Python or C/C++
• Excellent reporting writing and communication skills

Responsibilities:

• Apply engineering principles and techniques to perform equipment engineering
• Carry-out mechanical maintenance and basic electrical troubleshooting and repair of workshop machinery
• Ensuring repairs, installations and preventive maintenance on equipment are completed on-time and safely
• Implement network solutions for equipment capability monitoring
• Able to interpret electrical, pneumatic and hydraulic diagrams for troubleshooting purposes
• Maintain proper safekeeping of maintenance tools and equipment
• Carry out safety inspection at workplace and follow safety procedures
• Perform any other duties as assigned by his Immediate Supervisors

Requirements:

· Minimum 5 years experience in equipment engineering and CNC maintenance works

· Experienced in dismantling and assembling of machines

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Responsibilities:

• Acquisition and Implementation
• Advise and support corporate demand management in the acquisition and implementation of new services in regards to the IT landscape. Identify and evaluate potential solutions, ensure that requirements are met during development and support the implementation of IT
• Lifecycle Management
• Advise management on required upgrades of service components to guarantee continued support and required capacity to handle the expected load and volume of changes to keep the service aligned with changing business needs
• Service Coordination/product management
• Identify opportunities for service improvement. Acts as internal coordinator for the execution of service improvement plans
• Requirement specifications
• Formulate IT solutions/service requirements
• Architecture and design
• Contribute to enterprise architecture, start architectures and design or development of new services concerning the IT landscape. Contribute to standardisation and development of technical building blocks
• Development (coordination)
• Development of new and change of existing IT landscape (including coordination of 3rd party, and own development)
• Acceptance testing
• Ensure operational continuity and quality of deliverables of external suppliers through testing. Plan, organise and perform the functional acceptance test of new releases, including functional integration testing. Facilitate user acceptance testing of new releases by the business
• 2nd & 3rd level support
• Provide 2nd or 3rd level support on incidents and act as problem manager or SME for problems

Requirements:

• At least 5 years of experience in virtual or (hybrid) cloud environments
• A minimum BSc in Information Technology or a related field
• Microsoft Certified Systems Engineer or equivalent education and experience
• A passion for continuous improvement and preventive controls to minimize disruptions
• Eagerness to explore new technologies and implement innovative solutions
• Experience working in a global IT team
• Excellent verbal and written communication skills in English

Requirements

The role requires handling of measurement and detection equipment for military and homeland security. The ideal candidate should possess strong IT skills including, software installation and configuration. The resposibilities includes managing sales product inquiries, overseeing post-sales equipment delivery, performing regular maintenance, and conducting diagnostic analyses for troubleshooting and repair. A keen learning attitude and strong problem-solving ability are essential in this position. The candidate will also be expected to prepare basic reports. Effective communication and interpersonal skills will be important for maintaining and strengthening existing customer relations.