The School of Chemistry, Chemical Engineering and Biotechnology (CCEB) is seeking to hire an Assistant Manager responsible for  overseeing and assisting in the technical and administrative operations of the school. The primary goal is to facilitate and ensure seamless and secure operation of the laboratory, enabling faculty, researchers, and students to achieve their academic and research goals in an effective, efficient, and safe manner.

Responsibilities:

• Support the school faculty, research staff and students in carrying out their research activities including operating, maintaining & training of various lab equipment.
• Upgrade, optimize and troubleshoot lab equipment.
• Design and set up undergraduate teaching experiments including preparing materials, performing lab trials, conducting and supervising laboratory lessons.
• Update lab manual and experimental procedure whenever there is a need.
• Guide junior support staff and teaching assistants to ensure the constant good quality of work deliverables.
• Ensure safety standards in the lab are compliant with ISO regulations and carry out regular lab inspections.
• Ensure adequate lab consumables and manage purchasing of materials and inventory control.
• Ensure good laboratory housekeeping and safe laboratory practices.
• Propose and source suitable equipment for undergraduate and research laboratories.
• Liaise with suppliers on equipment setup, repair and maintenance.
• Carry out strategic budget proposal, tracking expenses associated with lab equipment and consumables.

Skills and qualifications:

• Degree in chemical engineering or process or technology with at least 5 years’ experience
• Experience in setting up new lab or equipment is preferred
• Strong problem-solving and troubleshooting skills
• Experience in handling, operating and maintaining scientific & laboratory equipment such as ICP, Chemisorption and Physisorption Analyzers, Pumps, Chemical Engineering Unit Operation, SEM, TEM, Gas and Liquid Chromatography, etc.
• Conduct training for new users, guide inexperienced users in operation of laboratory equipment  
• Support the manager to perform diagnostic tests and in-house repair process in the event of equipment failure, engage vendor for periodic calibration and preventive maintenance
• Effective record keeping of lab chemicals, consumables, assets and equipment maintenance records
• Laboratory support and management, with experience in writing standard operating procedures and risk assessments
• Manage projects and lab tours

Job Scopes

1. Automated Product Inspection Equipment (ATE) Design and Development .
2. New Product proces design and line setup.
3. Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members,
   draft the implementation schedule to meet target date, disseminate, and finetune the schedule with production PICs for the implementation to be carried out smoothly.
4. Follow-up with related members and enforce the usage of systems developed for Operation Change tracking.
5. Understand key functions and product master setting rules of our ERP system, process-related inline systems, traceability requirements, to align the process design with the systems.

Technical Background Requirement:

Electronic/Electrical Design, Software Design & Programming

Language Requirement:

English and Japanese is preferrable

Permanent Facilities Engineer position

Salary: up to $5000

overseeing overall building maintenance and security operation for all Central Offices, includes conducting inspection, coordinating maintenance/ improvement programs and projects, compile data for reporting and forecasting future needs and costs

Assist in operations and implementation of facilities management programmes, including formulating programmes relating to routine and periodic maintenance works, plan and implement the cyclical replacement/ enhancement works for all Central Offices

• Support Manager for preparation of operation and capital budget, monitoring and control to ensure completion within time and cost objectives.

• Assist in contract administration and management, including calling, evaluation, negotiation and award recommendation of tenders/ quotations.

• Support the effective planning and management of activities of outsourced service partners, providing supervision and controlling their performance

• Coordinate with internal associate engineers and the appointed managing agent to ensure maintenance of all systems are being carried out according to plan and contracted scope of work and manage facilities related to timely repair and replacement work.

• Assist to investigate, develop and implement solutions, trouble shoot on day to day operational problems of facilities and building.

• Assist to develop and implement policies, protocol and procedures to maintain full compliance with the prevailing legislative acts and regulatory requirements.

• Conduct periodical quality control inspections at all Central Offices for potential safety hazards and unsafe conditions, initiate corrective measures to maintain a secure, safe and healthy work environment

• Attend to all emergency/crisis on and off hours and provide a timely response to incidents as they arise and assist in emergency management and contingency planning.

• Assist in internal and external audits.

Requirements

• Diploma/ Degree in Electrical/ Mechanical/ Facilities Management/ equivalent with 4-5 years experience
• Well versed in all facets of facilities management with general knowledge of all real estate functions including planning, development, asset management and project management.

To apply

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• Independent and has ownership of his/her assigned tasks.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

The IS Administrator will be responsible for the administration, maintenance, and support of the Business Applications systems, and application components. This role also participates in the planning and implementation of policies and procedures to ensure system provisioning and maintenance that is consistent with company goals, industry best practices, and regulatory requirements.

Duties

• Administer Business Applications based on end-user's requirements or ongoing needs while providing excellent customer service.
• Analyze system errors and work with end users and related business units to correct and/or assist in problem resolution.
• Help diagnose performance issues related to business applications and work with internal and external vendors in their resolution.
• Plan and coordinate testing changes, upgrades, and new services, ensuring systems will operate correctly in current and future environments.
• Prepare user training document for business applications and associated processes with business departments

Requirements

• Able to start as soon as possible
• Fresh Graduate and Diploma in Information System or Computer Science related majors are welcome
• Microsoft VBA/VB Script programming Experience
• Knowledge of RPA (Robotics Process Automation) solutions
• Any experience in the area of ERP such as SAP, etc will be a plus
• Smart and willing to learn new things
• Good communication skills

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a senior process engineer you will lead the timely and successful transfer of the cell culture or purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Lead the preparation, execution, process monitoring and post-campaign activities for cell culture or purification stages of the customer’s manufacturing processes at Lonza Singapore production facility and also lead investigations into process trends, issues or deviations.

Key responsibilities:

• Technology Transfer: Lead the timely and successful transfer of the cell culture or purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Work with other MSAT team members, technical experts from Lonza’s customer companies or Lonza donor sites, Manufacturing (MFG), Quality Assurance (QA), Quality Control (QC), and other departments on the technology transfer.

• Process Support: Lead the preparation, execution, process monitoring and post-campaign activities for cell culture or purification stages of the customer’s manufacturing processes at Lonza Singapore production facility. Become proficient with all processes in the facility and develop ability to support/lead activities across multiple processes. Monitor processes on a regular basis to have further understanding of process behavior and prospectively identify process issues. Develop ability to generalize issues across processes.

• Write change requests and drive to implementation as needed.

• Review cell culture or purification process manufacturing batch records and provide technical input to MFG technical document writing specialists.

• Identify training needs and provide training materials for MFG operators on cell culture or purification process batch records. Work with MFG to update process batch records to enable robust manufacturing operations.

• Support plant start-up and pilot/commercial runs and perform technical investigations and help author technical reports to support close-out of deviations, trouble-shoot process excursions/issues for cell culture or purification operations.

• Design and perform/ support small-scale experiments/ studies in lab to support technology transfer or investigations.

• Follow all applicable lab safety policies.

• Support preparation of Annual Product Review (APR) and Continued Process Verification (CPV) summary reports, perform work-stages to support customer BLA filing.

• Maintain process databases and monitor batch to batch consistency of operations.

• Support inspections and audits by customer and regulatory authorities.

• Provide technical guidance and share process knowledge to MSAT team members and other departments.

• Any other duties as assigned by your Supervisor/Manager

Key requirements:

• Degree in chemical engineering, biochemical engineering, biochemistry/ chemistry/microbiology or related discipline.

• Extensive work experience in Biotechnology process development, process support, research or a related manufacturing environment.

• Prior hands-on experience in purification experimental technique and equipment.

• Knowledge of Excel as well as Statistical Data Analysis tools.

• Excellent communication skills, outstanding action orientation, and ability to work well in a cross-functional technical environment.

• Excellent technical writing skills, ability to provide attention to detail is essential.

• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

We are looking for a Technical Support Product Specialist with excellent communication and diagnostic skills.

As a technical support product specialist, you will required to perform the thorough product testing and evaluation, provide technical support, advice, and to provide solutions to consumers and businesses in regards to technical, hardware, and system issues.

Responsibilities:

• Conduct testing for new product/ software prior launching
• Provide repair, service and customer support during onsite visit
• Configuration of TV setup and other devices (i.e.; Android/ Apple devices)
• Work independently to diagnose and troubleshoot any onsite issues that arises at customer's place
• Record and update test report/ service report on a timely manner
• In-house repair and maintenance of TV that is exchanged by customer
• Support warehouse disposal activity
• Other duties as assigned

• Min 3 years of working experience as an onsite TV Technician or relevant experience
• Singapore Class 3 driving license
• Willingness to perform overtime work when required
• Possess at least Primary/Secondary School/"O" Level, Professional Certificate/NITEC, Diploma/Advanced/Higher/Graduate Diploma in IT, Electronics or equivalent.

• Annual Increment
• Performance Bonus
• Medical Benefits

JOB PURPOSE:

Create and prepare SMT placement programs based on CAD data / machine data available. Coordinate with suppliers in fabricating of solder paste stencil making and testing. SMT machines process improvement such as optimizing or balance the loading of each SMT machine placement. Conduct trouble shooting / repair / maintenance and improvement. Fabrication of jigs and fixtures for SMT production.

NATURE & SCOPE:

1) Programming of all SMT devices mounting data XY co-ordinates.

2) Request for CAD data, Gerber data, merge date & etc. and prepare the metal mask stencil

3) Prepare loading list and layout list.

4) Optimizing / balance the loading of each SMT machine placement to reduce machine placement loss time.

5) Troubleshooting of SMT machines

6) Plan and conduct periodic preventive maintenance of all SMT equipment and machines

7) Conduct process improvement base of New Yokogawa Production System (NYPS) concepts, on Quality, in-time delivery to the next process and at a competitive cost.

8) Participate in companywide improvement programs, such as small group activities (QC Circle) and Production enhancement through New Yokogawa Production System (NYPS)

PRINCIPAL ACCOUNTABILITIES:

1) Provides timely support to SMT line and ensure problems are solved

2) Recommend improvement to SMT line and machines for quality output and better yield

3) Provide proper training to operators on machine operation and new procedures adapted

4) Evaluate and check with vendors on SMT jigs, cassettes, equipment, materials & etc

5) Ensure proper programming of data for SMT machines

Optimize the SMT Machine placement to achieve the highest output

COMPETENCY REQUIREMENT:

a) Qualification:

Diploma in Electrical/Electronics/Mechanical with 2 years working experience in SMT production

b) Knowledge:

Good understanding of SMT production/process and machine

Good problem analytical power

Able to work independently

Job Description

Job Description

• Design & implement scalable & serverless architectures
• Organize and visualize raw data using data visualization tools
• Design database models
• Build & maintain deployment pipelines
• Software development lifecycle technical writing & testing

Qualification & Job Requirements

• Undergraduate student majoring in Computer Science, Information Systems, or equivalent
• Fluent Python programming skills
• Data visualization skills (e.g. Power BI, Spotfire)
• Familiarity with databases (e.g. SQL, DynamoDB)
• Knowledge of front-end languages (JavaScript, HTML/CSS) will be a plus
• Interest in cloud computing (AWS, Azure)
• Experience with PowerPoint, Word, Excel, and other Office365 products
• Excellent verbal, written communication and documentation skills
• Excellent analytical and problem-solving skills
• Demonstrates a growth mindset and comfortable working in agile environment
• Fast & independent learner
• Able to commit for more than 6 months for this internship

Learning Outcome to be gained by the intern

• Opportunity to gain more exposure in cloud computing & FinOps domain
• Exposure working in agile environment & global setup
• Continuous training on skills, competences and tools
• Able to experience wide range of technology e.g. serverless technologies, Infrastructure as Code, DevOps, APIs, and more

Brief write-up of the department

The Cloud Computing team develops the strategy and works with teams worldwide to govern, grow, and operate Cloud solutions.  Our team embraces the regulatory challenges of our industry and drives innovative, secure, and compliant use of Cloud Service Providers.  We collaborate closely with internal and external partners worldwide to mature our ability to utilize Cloud Service Providers. Our team also impacts application development agility worldwide via our cloud-based application hosting Platform as a Service (PaaS).

Current Employees apply HERE

Current Contingent Workers apply HERE

Search Firm Representatives Please Read Carefully 
Merck & Co., Inc., Rahway, NJ, USA, also known as Merck Sharp & Dohme LLC, Rahway, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company.  No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails. 

Employee Status:

Relocation:

VISA Sponsorship:

Travel Requirements:

Flexible Work Arrangements:

Shift:

Valid Driving License:

Hazardous Material(s):

Description

• Lead and manage Mechanical design coordination and interfacing with other designers/disciplines/contractors/specialists.
• Lead in Mechanical services coordination i.e., CSD/SEM and CCSM.
• Involve in Coordinated Installation Programme (CIP) coordination with other designers/disciplines/contractors/specialists.
• Conduct coordination meeting with all MEP trade sub-contractors.
• Liaise with relevant authorities for MEP services.
• Monitor all MEP trade sub-con on-site work and workforce according to the construction schedule.
• Co-ordination with M&E subcontractors on their works.
• Supervision of all MEP works carried out by MEP subcontractors.
• Ensure MEP works installations are carried out according to approved drawings and plans and check qualities of workmanship.
• Prepare design drawings and documentation.
• Plan all drawings request to meet the submission deadline.
• Draft plans and detailed drawings for MEP installations from sketches or notes.
• Any other duties assigned by the Management.

We are looking for SCCM Engineer for Singapore city for a large-scale project. This is a contract role with a global IT service leader.

• Must possess a minimum of four years of experience in industrial or consumer packaging.
• Must demonstrate strong expertise in SCCM 2012/Current Branch.
• Proven experience working in a multinational environment with flexible work schedules.
• Extensive experience in SCCM administration, monitoring, troubleshooting issues, and root cause analysis (RCA).
• Demonstrated ability to handle complex software deployment using SCCM.
• Proficient in patch management using SCCM, particularly with WSUS and Windows 10 servicing.
• Thorough knowledge of Microsoft Windows operating systems for both workstations and servers.
• Familiarity with basic SQL Server, VBS, and PowerShell scripting.
• Experience with SQL Server Reporting.
• Strong understanding and practical experience in troubleshooting SCCM-related technologies.
• Experience working with Delivery Optimization Solutions, such as Adaptiva OneSite or 1E Nomad.
• Familiarity with Intune and Cloud Management Gateway.

About Us

Zone IT Solutions is Australia based Recruitment company. We specialize in ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. Our delivery Offices are in Melbourne, Sydney, Singapore, and India. If you are looking for new opportunities your profile at [email protected] or contact us at 0434189909

Also follow our LinkedIn page for new job opportunities and more.

Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities.

Job Highlights

• 5 days week; Friendly Environment
• Medical and Dental Benefits
• Skills Development / Mentoring and Learning Opportunities

Job Description

Responsibilities:

• Generate innovative ideas and initiative in new product design.
• Involved in the full product development cycle from conceptual design, component selection, part detail design, managing vendor tool fabrication, parts approval, and mass production.
• Define and share the Design for Manufacturing (DFM) in the process flow diagram with Critical to Quality on the parameters with tolerance control that meet the product manufacturing in simulation performance expectation.
• Build up capability in product design for servicing, installation, and maintenance within R&D and Customer Service (CS). Understand and document design requirements for servicing, maintenance, and installation together with the CS Team.
• To adapt mold making process from design drawings.
• Involved in product sustenance engineering and value engineering.
• Ensure product design meets mandatory and quality requirements, within targeted cost and project timeline.
• Liaise with vendors on parts, tools, or mold fabrication to ensure quality and timely delivery.
• Set up and perform Product Validation Tests to qualify products developed.
• Experience in assessing supplier capability will be an added advantage.

Requirements:

• Degree in Mechanical / Mechatronic Engineering with at least 3 years related experience in designing for medium to large-scale production. Candidates with relevant knowledge and work experience will be considered for the Senior / Team Lead position
• Knowledge in injection molding, material, and component selection.
• Understanding of manufacturing processes and technical aspects of ceramics is a plus.
• Experience in designing products using sheet metal and plastic parts.
• Experience in using 3D CAD such as SolidWorks or Pro-E (Creo) for product design is a must.
• Knowledge in FEA (Finite Element Analysis)/CFD (Computational Fluid Dynamic) in Altair simulation will be preferred.
• Analyse test & simulation data using experimental design and statistical methods, evaluate failure data to find root causes and implement sound engineering solutions.
• Committed and self-motivated, a life learner and a good team player

Job Description

Perform after sales service / surveys to customers by providing; steam trap survey, commissioning, trouble shooting, repairing and assembling service for wide range of products.

Key Tasks include:-

• On site and in house repair and service of mechanical and electronic-based products of the company’s product range.
• Ensure that field activities such as servicing, customer visits, steam trap surveys, plant audits, steam quality testing, preventive maintenances, troubleshooting, and commissioning are properly planned, organised, and executed to achieve maximum productivity and effectiveness.
• Help customers to optimise their steam systems in term of sustainability.
• Determine the improvements required, to bring about a high level of productivity and efficiency.
• Continually search for new prospects, to expand customer base within assigned area.
• Develop a full understanding of the allocated industrial base and be aware of the market activities and the competition within this segment.
• To work with sub-contractors and vendors on service-related jobs.
• Troubleshoots and repair product, application faults.
• Calibration of instruments.
• Assembly and set up of specific products for delivery.
• Evaluation and inspection of spare parts supplier and quality of product workmanship.
• Any other related task assigned

Job Requirements

• Candidate must possess at least a Diploma Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 3 to 5 year(s) of working experience in the related field is required for this position.
• Excellent communications skills (verbal and written) with the ability to communicate and reason with people from diverse backgrounds.
• Proficient in MS office
• Computer ability in Auto CAD or SolidWorks program will be an advantage.

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.

• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

A great opportunity as a Data Engineer to work in cloud based data engineering, analytics and data management team in a well established company.

Mandatory Skill-set

• Bachelor's Degree in Computer Science or equivalent;
• Minimum 5 years of experience in data engineering and data management;
• Hands on technical experience in Azure Data Factory, Databricks, Synapse, SQL Server Integration Services;
• Strong experience in Python / SAS / R along with Tableau / Power BI;
• Strong experience in gathering business requirements and translating into technical specification;
• Strong analytical skills with high curiosity to deep dive into root cause of problems and suggest solutions;
• Has good stakeholders management experience;
• Attention to technical details;
• Ability to deliver tasks on time with high quality outcome;
• Self motivated and ability to take ownership;
• Strong written and spoken communication skills.

Desired Skill-set

• Azure Data Engineer Certified;
• ITIL certified;
• Prior experience in Python, R or Machine Learning tools.

Responsibilities

• Design and develop data models, ETL pipelines, data integration process while ensuring data accuracy and quality;
• Perform data analysis of structured and unstructured data and perform business intelligence initiatives such as build user friendly reports using data visualization tools;
• Analyze ETL requirements from users and provide solutions accordingly;
• Responsible for planning and executing data profiling and data quality analysis;
• Monitor data pipelines, databases and analytical processes to ensure smooth operations;
• Identify and resolve data-related issues, performance bottleneck and data quality problems;
• Design and document data catalogs and data architectures;
• Perform regular data cleansing exercise to ensure that data is of high quality and relevant to the business needs;
• Execute data transformation, correction and aggregations to ensure compliance with business / regulatory requests;
• Build and maintain reports and dashboards using suitable data visualization tools;
• Conduct analysis on the reports and translate the findings into valuable insights to business users;
• Prepare data for prescriptive and predictive modelling;
• Perform database monitoring and performance tuning.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Responsibilities:

• Engage in both exploratory data analysis to identify trends and data patterns
• Perform data preparation and data cleaning part of data migration project. 
• Understand Source data and support Source to Target mapping rules
• Design and implement the ETL framework for the data warehouse
• Build and maintain DBT pipelines to transform source data into reporting data models for our visualization team
• Build the Data Ingestion framework and ingest data from source files to load into Staging layer using DBT
• Code orchestration pipelines leveraging Python to connect data ingestion, DBT, Power BI
• Perform data profiling and identify any data quality issues and report to source systems 
• Using best practices build the ETL components as per mapping rules to move data into ODS; SOR layer and Data marts 
• Ensure the ETL jobs are set up; configured and scheduled  
• Develop data pipeline observability test scripts in DBT to monitor anomaly and freshness, and detect data quality issues
• Perform Unit testing on ETL components built and provide unit test results. Support System Integration testing and User Acceptance testing and fix any issues 

• Proven experience as a Data Engineer, with a focus on ETL development, Azure Data Factory, and DBT Cloud.
• Strong proficiency in SQL and experience working with relational databases.
• In-depth knowledge of data modeling and data warehousing concepts.
• Experience with cloud-based data platforms, particularly Azure.
• Certification in Azure Data Factory or DBT.

Capacity Analyst / Engineer

Responsibilities

1. Coordinate with stakeholders to understand capacity and demand needs
2. Review and reclaim unused Storage/Cloud capacity
3. Secure funding approval for capacity expansion if required
4. Establish and maintain effective communication with all related key stakeholders to ensure the successful delivery of capacity expansion / annual capacity plan

1. Good understanding of server and storage technologies
2. Excellent Excel and PowerPoint skills
3. Excellent communication and presentation skills (verbal and written)
4. Project management experience in working with medium to large-scale implementations
5. Ability to work in a fast-paced environment with several competing priorities
6. Ability to analyze data and produce trends to support capacity planning activities

Desired Skills

·        Comfortable working with ambiguity and rapidly changing priorities

·        Ability to effectively interact with all levels of management

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.

• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

Who We Are

We are an Artificial Intelligence (AI) technology backed by Shell, one of the world's leading energy companies, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), geophysics, among other specialised topics. We are looking for people from various development backgrounds but most importantly for someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology on real-work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

• Bachelor's or Master's degree in Computing, Science or Engineering with 2 years+ of software development experience.
• High proficiency with Python is a must. Experience in C, C++, Rust or other programming languages is a plus.
• Good aptitude at abstract thinking and problem solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as Git, Linux Shell Scripting, Vim/Emacs, etc.
• Experience with parallel computing, system programming, full-stack development, web development can be a plus.
• Ability to work effectively in a fast paced environment with high expectations.

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have immediate impact on high impact real world problems such as natural resource exploration and energy security.
• Have your work recognised with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high performance bonuses well above market rate.
• Friendly and casual working environment.