• M&E Consultancy Services for Building and Industrial project since Year 2003
• Specializing in: (1) ACMV System; (2) Kitchen Exhaust System; (3) Electrical Services; (4) Fire Sprinkler & Alarm System; (5) Water Plumbing Services; (6) Sanitary Plumbing Services; (7) Gas Plumbing Services.
• Location: Hougang | 5 days work week

Responsibilities:

• To supervise the timely execution of Mechanical/ Electrical works, maintain quality control and ensure that all installations are in accordance with the Working / Approved Drawings, and applicable local Codes, Regulations and Standards.
• To check quality of materials and samples delivered to site and report for materials not conforming to the specifications.
• To monitor and report on contractor's performance, progress against planned schedule and provide weekly progress reports.
• To prepare, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To check mock-ups done on site, where necessary.
• To witness and ensure that the tests are carried out in accordance with approved method of statements.
• To carry out coordination of services.
• To attend site, progress, variation and coordination meetings.
• To assist in verifying and keeping records of all variations carried on site.
• To verify all reports and claims submitted by the contractors.
• To assists Mechanical and Electrical Engineer.
• To ensure all installation work is carried out with proper approval from Employer and relevant authorities and keep records.

YOUR RESUME MUST INCLUDE:

1. Expected salary

2. Past projects involved - What kind of building or constructions, duration, value, name, etc

3. Notice period

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

• At least Diploma in Mechanical or Electrical Engineering.

• Has experience in project management.

Salary

$3,000 - $4,000 (Higher salary subjected to review)

Job Overview: The ideal Electrical Engineer is responsible for the design of the electrical system and electrical system inspection. Candidate will be responsible for electrical devices and testing them for safety and efficiency. Their duties include managing the manufacturing process for new electrical equipment, using design software to produce schematics and overseeing the installation process of their designs.

- Monitor and co-ordinate works with supervisors

- Install electrical wiring system (lighting fixtures, power sockets, panels)

- Attend complaints related to Electrical, manufacturing or mechanical work

- Corrective maintenance activities for system failure

- Perpare manuals, part list, proposals and design documentation

- Prepare cost estimates for customers

- Time management skills for meeting deadlines

- Planned and executed of corrective/preventive Electrical maintenance programs

- Other adhoc work assigned

AYE SUCCESS

Lic no. 10C5753

This is an ad for creators of change!

This is for you who wants to have a real impact on creating a healthier planet for our children every day. At Neste, you will be working for the world’s leading producer of sustainable aviation fuel and renewable diesel and a forerunner in developing renewable and circular feedstock solutions for polymers and chemicals. Let’s create transformation for a sustainable future together.

We are looking for you,

E&I Field Engineer

to our Maintenance team in Tuas Singapore.

You will focus on Electrical and Instrumentation. In this job you will work closely with Maintenance Lead.

In our team, the purpose of the E/I Field engineer is to provide direction and supervision of E/I or Ad-hoc contractors. This position is responsible for helping the organization achieve reliability excellence by providing direction and supervision for the execution of tasks. Together with you and your expertise, we can make an impact today and keep our promises for tomorrow.

Reasons to join

Real impact right now. We work in an inspiring and evolving business environment, where everything we do serves one purpose: to create a healthier planet for our children. To drive a growing impact as a global leader in renewable and circular solutions we live by our values every day; we care, we have courage, we cooperate.

Safety and caring. We value safety always and everywhere. We want our work to feel good and do good. At Neste, we nurture a culture where everyone is welcome and feels safe, respected and encouraged to be their unique true selves.

Exciting growth. Transformation brings new possibilities and fosters our courage and curiosity. As a global growing company we support personal development with versatile learning and career opportunities. Collaboration is the key, and we believe in flexible, smart ways of working.

More about the job

Your role in our team in creating a sustainable future

Maintenance Execution

• Ensure all aspects of Safety, Environmental, Quality and Cost are being met.
• Accountable for execution of all maintenance work in accordance with the local Authorities requirement, Industry and Neste rules and regulations.
• Ensures Neste and Contract Resources are available for scheduled jobs and special services. Manage, coach, and facilitate a team to execute maintenance activities. Distribute and discuss jobs daily.
• Jointly discusses new job priority with Operation and Planners.
• Responsible for performing frontline troubleshooting of equipment with focus on analyser equipments
• Shall attend the daily operational and co-ordination meetings.
• Responsible for crossed discipline coordination to complete the principal maintenance task.
• Participate actively in Neste HSSEQ programs to achieve own, contractors, and functional HSSEQ targets.
• Responsible for resources and delivering assigned commissioning activities.
• Ensure compliance to the MOC, PHA, PSSR process.
• Understanding, supporting and applying Neste recommended practices for best in class results.
• Responsible for ensuring compliance with technical assurance and commissioning procedures.
• Setting a safety culture to ensure a personal and continuous care around the safety of anyone at site.

Continous Improvement

• Responsible for working closely with team members and soliciting input from all team members on opportunities for improvement.
• Responsible for constantly looking for opportunities to improve cost effectiveness.
• Cooperates with reliability to continuously improve equipment and operational reliability and sustainable work flow processes and systems in a safe and cost effective manner

Others

• Ensure all documentation is maintained, history is being captured, and any feedback is effectively being utilized. Be prepared for audits of this documentation.
• Contribute to the development of work procedures.
• Responsible for the development and implementation of maintenance effectiveness programs and the tracking of these programs. Looks for opportunities to eliminate low value work and replace it with vital work.
• Participate in contract setup scoping, shop visits, and vendor selection.
• Works with engineering and/or assist to eliminate bad actors by repair, replacement, or re-engineering. Much of this will be to recognize repeat issues and understand the root cause of issues. To use Root Cause analysis, whether it be for everyday troubleshooting or as feedback to engineers or production.
• Contributes to the material management strategy setup and update.

Keys to success in this role:

• Degree/Diploma in Engineering or equivalent
• At least 8 years relevant experience in refinery and petrochemical in the same position for 5 years.
• Prior Experience in E/I Projects ,Commissioning, TAs execution
• Knowledgeable with international standards, petroleum /petrochemical plant equipment
• Experienced in maintenance work control, planning, reliability methodologies
• Good communication with strategic thinking, negotiation and business sense

Let’s get you started

Wondering whether we are a match or not? Take a short test at neste.com/game.

We look forward to receiving your CV and application (with a salary request)

We will do our best to contact you within 4 weeks after the application time has ended. The recruitment process will include interviews and a possible aptitude assessment. (The person selected for the position must pass a health examination including a drug test. A security clearance is obtained with their consent.)

About Neste

Neste creates solutions for combating climate change and accelerating a shift to a circular economy. With over 75 years of refining expertise, we are now the world’s leading producer of sustainable aviation fuel and renewable diesel and a forerunner in developing renewable and circular feedstock solutions for polymers and chemicals. We have set aspirational targets for climate, biodiversity, human rights, as well as our supply chain and raw materials. Our ambition is to make the Porvoo oil refinery in Finland the most sustainable refinery in Europe by 2030. Together with our partners we are aiming at a carbon neutral and nature positive value chain by 2040. Our success is created by 5,400 professionals working in 16 countries. Read more: neste.com. Get inspired by our story.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction activities on-site to ensure adherence to project plans, specifications, and regulations
• Manage Resident Technical Officer(s) in performing their duties on site
• Conduct regular inspections to ensure quality control and compliance with safety standards
• Resolve any technical issues or conflicts that may arise during the construction process
• Maintain accurate and up-to-date project documentation, including progress reports, site records, and inspection reports
• Collaborate with QP, site management team and other stakeholders to ensure project objectives are met
• Any other duties to be assigned from time to time

Pre-requisites

• Degree in Civil Engineering recognized by the Professional Engineers Board
• Registered with IES/ ACES with min 2 years relevant experience
• Conversant with local building codes and regulations
• Strong problem-solving skills and attention to detail
• Excellent communication skills and a good team player
• Project location: Jurong Island (Transport will be provided from designated pick-up points)

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Review and advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents
• Prepare & Review HVAC calculation, specification and vendor's drawing
• Prepare & Review HVAC 2D SLD/DLD design & submission.
• Prepare & Review HVAC 3D model and production & site related drawings/supports.

Job Requirements

• Minimum 5 years of relevant work experience in the Machinery / HVAC newbuilding design in the Marine/ Offshore industry.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

SECTION 1: POSITION DETAILS

Job Title for Posting

Thin film coating engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

•  Able to work from 9pm - 6am.
• Prepares substrates/precursors, loads samples and prepares material coating process for experimentation in time and quality
•  Evaluates performance of process system.
•  Interface with team members, understand their detailed plan and requirement.
•  Monitor process and hardware performance.
•  Records process conditions and experimental observations.
•  Report data to the research team.
•  Assist in laboratory and equipment maintenance.
•  Perform routine shut down procedure.
•  Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

•  Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
•  Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
•  Capable to work in a clean laboratory environment daily
•  No disciplinary issues history
•  Self-disciplined, good team player
• Responsible and independent worker
•  Reactive to malfunctions
•  High self-motivated and effective team player with good communication skills
•  Attentive to details
•  Good written and verbal communication skills (both in Mandarin and English)
•  Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

• Lead UX design for a suite of applications working across a cross functional team.
• Work closely with product management and engineering, providing design perspective to help ensure a unified and cohesive experience across the investment ecosystem.
• Conduct user needs assessment, task analysis, and develop user profiles; identify key tasks for user research, competitive analysis, user testing, and develop usability plans.
• Develop high-level task flow content and use storyboards and other design documents to communicate concepts and vision to others.
• Develop UI layouts including controls, labels, and graphical elements for software on both mobile and desktop platforms with an eye towards experience unification.
• Create end-to-end detailed design deliverables as a series of experience maps, storyboards, wireframes, and interactive prototypes.
• An inspiring portfolio showing how the candidate has researched and crafted great experiences and seeing them through to released products.
• Ability to understand and distill complex problems into elegant, informed solutions.
• Ability to articulate and champion design solutions based on user-centered design principles and incorporating research data.
• Expert with design tools (e.g. Figma, Sketch, Adobe XD) to produce wireframes and high-fidelity interactive prototypes.
• Experience working in an iterative and agile development environment.
• Excellent teamwork and communication skills to effectively collaborate with multi-functional and multi-disciplined teams.

Summary:
• Supporting a new middle office operations platform to perform finance journal posting and business operations workflow.

• Completing all tasks assigned by the senior engineer
• Assisting in the testing and designing of machines and equipment
• Solving problems and following instructions in fast-paced environments
• Performing routine maintenance and repairs on vehicles and equipment
• Maintaining inventory of parts and supplies

Description:

• Organize and plan a design work schedule to meet deadlines.

• Ensure design, drawings, and all other deliverables meet the requirements and specifications.

• Oversee design preparation are efficient, well-coordinated, practical, and constructible.

• Prepare and submit shop drawings according to project specifications, ensure the design drawings are following the company design guidelines and structural calculations and building integrity.

• Work with the project team, sub-contractor, supplier, and factory team to ensure works are on schedule.

Requirement

• Diploma in Architecture, Civil Engineering, Mechanical, Mechatronics, or higher qualifications.

• 3 years experience in the design of window & door, curtain wall, claddings, etc.

• Familiar with Autocad drafting, 3D software.

• Energetic, matured, creative, and innovative, able to work under pressure with minimum supervision.

• Bilingual is preferred.

Job Description & Requirements

Roles & Responsibilities

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc;
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 2-3 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E.
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation;
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Responsibilities

• Develop and maintain strong relationships with customers, understanding their needs and ensuring their satisfaction with our products and services.
• Collect and analyze customer feedback to identify areas for improvement in products and services.
• Collaborate with the sales team to identify additional sales opportunities through service excellence.
• Capable of handling repetitive duties efficiently; possesses excellent communication and organizational abilities, meticulous attention to detail, and a collaborative, upbeat approach to work

Requirements

• At least Diploma or Degree preferably in Mechanical / Controls
• Ideally with 1 - 2 years of Build Environment Industry
• Able to work independently in a challenging and demanding environment
• Communicate effectively, Customer orientation, Flexibility and self learning
• Good Negotiation skills, Professional attitude, Teamwork
• Energetic, sales-driven and good interpersonal skills
• Proficient in MS Office; Excel and Powerpoint
• Good to have; Knowledge of ACMV/BMS in Building Sector
• Good to have but not a must; Possession of a class 3 driving license with own vehicle
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

1. Accelerate New Energies and LNG project development in the BU’s as per Projects way of working in Vopak

• Support the technical work stream of New Energies projects and LNG projects in Identification and Selection phase
• Provide up-to-date technology and project expertise in the 5 product groups of New Energies: green NH3, CO2, LOHC/LH2, Sustainable products and Flow Batteries
• Provide up-to-date technology and project expertise regarding land-based and floating LNG solutions
• Connecting and integrating Global functions into the project development

2. Deliver qualitative ID and SEL designs and cost estimates

• Flow modeling, conceptual engineering and cost estimating, using Vopak’s engineering toolbox and Repeatable Formula
• Upfront agreement with BU’s on scope, budget and delivery schedule via signed SLA’s
• Identify potential risks and challenges in engineering projects and implement mitigation plans

3. Develop and continuously improve GTE processes and tooling

• Develop RF content for LNG and New Energies; develop new toolboxes when new RF areas become available
• Continue to review and improve our existing processes, particularly toolbox usability and accuracy, based on the continuous program of improvements and benchmarking
• Focus on collecting feedback from stakeholders (particularly BU Business Developers and Project Managers/Directors) to ensure we are meeting requirements and where further improvements and tools are required
• Collect operational and maintenance requirements in new build knowledge bases (Repeatable Formula) from Assets management (Technical Standards and Specifications)
• Ensure that feedback information from completed and operational projects is incorporated into design process
• Automate deliverable production where appropriate

4. Technical consultancy to grow terminals and to facilitate M&A due diligence

• Provide technical expertise to BU’s
• Provide shareholder's technology & engineering consultancy where necessary
• Critically review terminal growth IP's
• Lead the engineering aspects of JV projects, ensuring effective communication, coordination, and alignment of goals between all parties involved. Drive collaboration and synergy to maximize the success of the project

5. Technology Maturity Assessment

• Review technology claims of emerging technologies in GBD product groups
• Review technology claims of potential new ventures (Vopak Ventures)
• Monitor and track emerging new energy technologies, developing appropriate design tools and methodologies to support business needs based on technology readiness levels

6. Participate in the Engineering & Construction of projects in Definition and Execution phase

• Participate in the technical workstream of the project's Definition, Execution and Commissioning stage
• Ensure qualitative contracting of E, P and C contracts to service all project requirements
• Ensure effective contract management of E, P and C contracts within the agreed scope, schedule and cost
• Guarantee safe execution of construction activities

Requirements:

• Master degree in Engineering
• Familiar with project management methodologies like Vopak Project Management (VPM)
• Ambition to develop into Project Management, with willingness to be deployed as soon as possible into a project in Definition or Execution phase
• Fluent in English both in verbal and written
• Customer orientation, quality orientation, result orientation

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

. Understand used computer-aided design software, including AutoCAD 2D, Revit BIM MEP.

. Liase with BIM Manager Interpreted technical drawings, schematics and computer generated reports to revise CAD drawings.

· Assist project manager to oversee overall project progress, manpower and monitor project schedule.

· Day to day site co-ordinations with main con, sub-contractors at construction site to ensure site works complete within the time line.

· Support and allocation of resources as planned and submit daily work progress and manpower forecast report.

· To preparation, submission and obtain approval of MOS, RA, SWP, shop drawings, material, equipment, RFA, RFI etc. Filing and recording of project documentation.

· Able to study, draw and plan basic electrical drawing and able amend and update drawing.

· Attend technical meeting, daily site progress meeting and safety meetings.

· To preparation of OMM manual, As-Built drawings, training and DLP program.

Requirements

. Minimum Diploma or Degree in electrical Engineering/ Construction Engineering/ Eletronic Technology or equivalent Minimum 1 years’ working experience in projects

· Obtained certificate Intermediate Revit (MEP) (Autodesk)

· Good communication and interaction skill.

Responsibilities :

Supplier Quality:

1. Ensure supplier quality programs are in line with customers' requirements for manufacturing, packaging and operational processes.
2. Liaise with suppliers CQE on quality, reports and requirements related issues.
3. Maintain and publish supplier quality data for review with stakeholders on regular basis.
4. Liaise with suppliers for quality discrepancy and follow up the improvement actions from suppliers, and monitoring of incoming SPC.
5. Follow up return-to-vendor material issues and claims together with Purchasing.
6. Work with supply chain to drive Cost-of-Poor-Quality improvements and initiatives: Appraisal, Internal and External Cost.
7. To be lead for supplier quality audits.
8. Work with functional team to define inspection criteria to ensure supplier process capability is effective to meet product requirements.
9. Establish incoming material sampling and inspection plan per customers' requirements.
10. Review the CofA/CofC for incoming material, provide analysis of incoming quality.
11. Work in house and with external lab and/or RM Suppliers to ensure statutory, regulatory and products cleanliness requirements are taken care of and follow-up.
12. Prepare material RoHS, Halogen, REACH, CMRT, Prop65, etc, compliance submissions as needed.
13. Develop, expand and maintain in-house laboratory facility/equipment.
14. Oversee the calibration requirements of measuring and test equipment.
15. Work with QC and technical team to establish the laboratory regime.
16. To carry out the project management or ad-hoc projects as assigned.
17. Ensure compliance to QMS, EHS and L&E procedures in the department.

Responsibilities:

• Structural design and checking; submission of structural drawings and liaise with government authorities; co-ordinate with site project teams; attend site meetings with clients and contractors.

• Assist Director or Senior Engineer on reviewing and provide solutions to technical problems as well as plan, monitor and report work progress of the construction/project.

Requirements:

• We need Junior and Mid-level Engineer to fill up the positions.

• Minimum 3 to 5 years of relevant working experience in consultants office.

• With Knowledge in Euro Code

• Min. Degree in Civil Engineering recognized by P.E.Board

• Effectively bilingual

• Be familiar in Prokon, Orion, TSD, Etabs, ZWCad softwares will be an advantage.

• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.

Interested candidates, please send your resumes online with the following details:

• Availability & related work experiences

• Current/last drawn salaries

• Expected salary

• Position applied for

We regret that only short listed candidates will be notified

Responsibilities:

· Responsible for day to day project supervision for repairs of commercial and naval vessels

· Ensure engine overhaul processes are carried out effectively and productively in order to meet customer specifications and requirements

· Ensure the quality assurance of engine repair work and oversee assigned project to achieve engine delivery deadline and target

· Workshop maintenance to prevent work interruption especially for critical components such as test bay facilities, cranes, governor and fuel pump/injector overhaul station and etc

· Assist department head in evaluating of technical/engineering requirements of the jobs

· Perform engineering calculations and analysis, review of of drawing and resolving site technical issues.

· Plan and execute job as per planned Critical Plan Analysis (CPA), update and review of changes, resolve them in order to complete job within planned schedule safety and good quality

· Coordinate with transport during heaving lifting/transporting and check condition and status of lifting appliances/equipments and tools

· Submit field/service reports after job acceptance, attached with deviation or deficiency reports

· Liaise with owners representative and/ or class surveyor during witness/ inspection.

· Provide in process quality control support both in workshop and onboard to ensure job completion within schedule and no reportable claim.

· Liaise with project manager (SRM) to arrange for inspection/acceptance as per required

· Responsible for pre-service, disassembly, assembly and pre-delivery inspection and duly filled/initialed the relevant checklists, protocols with reference to update version

· Requisition and verification of spare parts for the service work; consolidate the material, stock take and indent spare required for supplementary work

· Supervise and responsible for the quality control standard of work carried out by his team

Requirements:

· Diploma or Degree in Marine or Mechanical Engineering

· Preferably 3-5 years of working experiences in shipyards or OEMs for engines

· Able to perform troubleshooting on pneumatic, hydraulic, piping and basic electrical system with minimum guidance

· Knowledge on Engine overhauling and applied mechanics

· Familiarity with Engine Warranty, Claims and Job Acceptance related processes

· Able to supervise a team in both workshop and onboard vessels

Other Information:

· Location: Benoi Road (Island-wide transport provided)

· 5 days work week

· Working Hours: 7.25am-5pm

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Basic: S$3,000 – S$3,500
• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits

Job Description:

• Familiar with HVAC offshore / marine regulations and rules, such as, SOLAS, ABS, DNV, NORSOK, ASHRAE, ISO 7547, 8861 etc.
• Preparation of cooling load calculation, ventilation system design, air conditioning design, pressure drop calculation, duct sizing, grille/diffuser sizing, material take off etc.
• Responsible for HVAC equipment sizing and selection.
• Preparation of P&ID, D&ID and ducting layout drawings etc.
• Preparation of electrical single line diagram, cable block diagram, control diagram, termination diagram, electrical load calculation HVAC system logic diagram, HVAC Cable schedule etc.
• Ensure the HVAC system design and equipment selection are compliance with client specification, class regulation and hazardous area classification.
• Submission of HVAC/Architectural Design document and drawings for class approval.
• Technical submission (drawings and document) checking and revision control.
• Preparation of technical specification, technical bid evaluations.
• Interface with other disciplines and provide necessary guidance on HVAC/Architectural installation.
• Technical Clarification with Client and Vendor.
• Involved actively and monitoring the engineering, procurement, construction and commissioning HVAC system and architectural work.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Instruct supervisors/foreman on a day-to-day basis for work progress.
• Liaise with representatives, classification society surveyors and other to comply with inspection requirements.
• Resolve any technical problems or issues faced at work site.
• Monitors progress and instruct supervisors and foreman on safety and quality.
• Maintain the file copy of all latest revision drawings, approved procedures, client site instruction, project specifications, raised AFI and client signed reports for materialreceiving inspection and mechanical works for internal and external audits.
• Prepare Red-Line Mark-up as per site changes and submit to Engineering Dept to prepare as-built.

Job Requirement:

• Diploma/Degree in Mechanical Engineering
• At least 5 year experiences in Bolt Torque and Flange Management in Marine shipyard
• Experience in marine HVAC installation and testing
• Experience in troubling shooting HVAC system and equipments
• Some knowledge and experience in shipyard safety rules and regulations will be an added advantage
• Willing to work shift

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Create shop drawing based on information, specifications, calculations and incorporate all details of shop drawing.
• Ensure the drawings in keeping with company standards.
• Understand company welding and nesting details.
• Provide MTO based on drawing details.
• Develop and maintain drawing numbering system and proper control of revisions.
• Maintain all drawing files and update drawings.
• Explain drawings to Production or Construction teams and provide adjustments.

Job Requirements

• Diploma in Engineering or equivalent.
• Minimum 5 years’ experiences in steel structure detailing preferred.
• Candidates with Tekla Structures software knowledge will be an advantage.
• Hands on AutoCAD and drafting knowledge.
• Fresh graduated can be consider and training will be provided.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628