Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

We are looking for a skilled Technical Writer or Technical Writer Assistant to produce high-quality documentation that contributes to the overall success of our products. You will join a team of talented tech writers who work collaboratively with developers, quality engineers, product managers, and usability experts to make our products easier to use.

Job Responsibilities

• Work with internal teams to obtain an in-depth understanding of the product and the documentation requirements.

• Write and edit user manuals, technical documents, marketing materials, and other related materials.

• Assist with video editing tasks to create promotional videos

• Produce high-quality documentation that meets applicable standards and is appropriate for its intended audience. • Write easy-to-understand user interface text, online help, and developer guides.

• Create tutorials to help end-users use a variety of applications.

• Analyze existing and potential content, focusing on reuse and single-sourcing opportunities.

• Create and maintain the information architecture.

Job Requirement

• Ability to deliver high-quality documentation, paying attention to detail.

• Ability to quickly grasp complex technical concepts and make them easily understandable in text and pictures.

• Excellent written skills in English

• Strong working knowledge of Microsoft Office

• Basic video editing skills

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.

Engineer Requirements:

• Strong problem-solving, communication, and listening skills.
• Experience in Project Management.
• Good command of secondary engineering tools (AutoCAD, Engineering Base).
• Strong oral and written communication skills. Ability to document, plan, market, and execute programs.

1. To perform troubleshooting of Live plant MCC, other electrical panels, lighting systems, and various process instruments

related to Jurong Island - Chemical plant.

2. To support and oversee vendor-installed new MCCs/LV boards as per the design and ensure safe commissioning

assistance as per protocol.

3. To do regular Preventive maintenance for of above.

4. Sound knowledge of area classifications related to the process industry and ensuring equipment inspection, and

verifications are in order

5. To do works, servicing of valves and actuators

6. To upkeep the spare part list and consumable list

7. To key in manhour in the CMM system

8. To upkeep the maintenance records and perform maintenance activity assigned by the supervisor 9. To perform electrical

LOTO for site activities.

10..To perform minor cable laying, termination, and glanding of E&I equipment.

11. Assist mechanical technicians with any emergency troubleshooting related to E&I works.

12. To provide support for E&I fitter for tray works and tubing, and related installation works(small panels, lights JB, etc)

13. Previous experience in turn-key / green field / gray field E & I construction experience is mandatory

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

NOV Fiber Glass Systems is a leading and trusted solution provider of corrosion-resistant non-metallic composite products. We served the marine and offshore, chemical and industrial, oil and gas, fuel handling and mining industries. The NOV Fiber Glass family, with manufacturing facilities located around the word, is committed to provide the highest quality versatile materials - including glass-reinforced epoxy (GRE) piping, fiber-reinforced polymer (FRP) structures, and composite pressure vessels.

Job Description

• Develop and maintain market growth and expansion (Regional)
• Build and strengthen relationships with key accounts to capture orders and sales revenues.
• Bidding, tendering, and handling enquiries for major projects.
• Project management, work out project plan and monitor project progress development from start to end delivery of project, negotiate with customer for reasonable project lead time.

Job Requirements

• Degree / Diploma in engineering discipline
• 3 - 5 years of Sales experience or Project Management experience an advantage
• Extensive travelling
• Sales Customer orientated, self-motivated, adaptability, influence decision makers, great impact & integrity.

What do we do?

Arcadis DPS Group is the world’s leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. With sustainability at the heart of everything we do, our focus is on maximizing our impact aimed at improving quality of life. The solutions we develop, address important societal challenges around resilience, places, and mobility. Leveraging data and technology, we have the capabilities and services to meet client demands driven by global trends such as urbanization, climate change, digitalization, evolving stakeholder expectations and potential unforeseeable events.

With over 36,000 people, in over 70 countries, dedicated to improving quality of life, a career at Arcadis DPS Group is truly rewarding with excellent benefits and opportunities to develop your technical and professional development.

What are we looking for?

Our Semiconductor EPCM business is growing, and we are recruiting leaders. This Senior Mechanical Engineer position involves working as part of a multi-discipline, highly interactive and coordinated team focused on projects including semiconductor manufacturing, data centre facilities, and other state of the art manufacturing facilities for our global projects in EU & US to work remotely based out of Singapore office. The ideal candidate will be a self-motivated individual with strong communication skills and leadership. They will exhibit a passion and desire to apply their professional experience and knowledge in a team environment on technically challenging and professionally rewarding projects.

The Senior Mechanical Engineer should be willing to work as a team member and assist engineers to mentor younger members of the team, and mentored by other engineers. Training will be on going with continuous professional development throughout their career with Arcadis.

Our team is seeking a person who understands the importance of meeting their targeted commitments while being flexible to the ever-changing and fast paced environment of our clients’ sites.

Job Scope:

• The Senior Engineer shall be responsible for full system designs under the supervision of a Lead Engineer on large projects and under their own initiative on smaller projects reporting to their Manager or Project Manager.
• The Senior Engineer shall be responsible where required, depending on the size of projects, to run a team of Engineers, Designers and Technicians and report to the manager or Project Manager.
• Perform necessary engineering and design tasks to produce construction documents in conjunction with a team of engineers and designers.
• Coordinate and collaborate real time with other disciplines such as electrical, structural, architectural and process to develop designs.
• Follow quality and have an understanding of the CAD/BIM standards.
• Provide technical support and assistance to Engineers and Technicians.
• Perform quality review checks for 2D/3D modelling and Mech/HVAC deliverables.
• Display strong communication and interpersonal skills and have the ability to work in a fast-paced team environment with multiple deadlines.
• Participate in design reviews and risk assessments.
• Assist in the generation of proposals, scopes, schedules and budgets for projects.
• Exercise judgment in developing plans or alternatives and work with teams to assure quality plans.
• Perform field activities such as observation of construction activities.
• Review construction submittals for conformance with the intent of contract and design documents.
• Provide guidance and mentoring to project engineers and designers on a project-by-project basis.
• Work towards site master planning, concept designs and preliminary through to construction engineering phases with other team members as the Semiconductor Global process expert across multiple global projects.
• Keep on top of technology and industry trends and development.
• Assist in the continuous improvement of group’s systems, procedures, standards and knowledge management.
• Uses computer-assisted engineering and design software and equipment to prepare engineering and design documents.
• Develop system sequences of operation and P&ID’s.

Job Requirements:

• Minimum qualification of bachelor’s degree in building services/mechanical engineering.
• 8+ years’ experience with industrial/commercial design.
• Semiconductor experience preferable(but not a must), skill sets: wet and dry black facilities, calculations, specifications, detailing and sizing.
• Relevant engineering/design experience in industrial/advanced technology sector.
• Engineering/design experience in the Mech/HVAC systems.
• Experience with start-up and commissioning will be an advantage.
• Experience in equipment layout definition.
• Excellent English level - written and spoken.
• Attention to detail and demonstrated initiative.
• Computer literate (Microsoft Suite of Programs).

Essential Skills:

• Knowledge of Mech/HVAC specific design standards (minimum UK/EU), with an understanding of the international building codes.
• Ability to interact with other engineering disciplines, clients, and vendors at all levels.
• Experience using 3D BIM environment.

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

Job Description & Requirements

Responsibilities:

- Design of equipment / steel structures (EOT, Gantry, Monorail, Jib Crane etc).

- Coordinates with in-charged on new process requirements, design interference check and design changes

- Prepare non-standard crane, hoist part component and machinery design layout drawing

- Design and calculation of steel weight for quotation

- Structural analysis and design of cranes’ girder and supporting structures, etc.

- Preparations of submission documents for construction approval

- Drafting using AutoCad as and when required

Requirements:

- Degree in Civil (Structural) Engineering

- Experience with AutoCAD / StaadPro is a must

- Familiar with Revit / Solidworks is an advantage

- Qualification as Approved / Registered Technical Controller under BCA Specialist Builder (Steel Structure) class of licence is an advantage.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

What will you do?

· Testing & Commissioning Shutdown Maintenance Works

· Service of LV/HV, Switch Gear, Control and Relay Panels

· To perform customer site service activities involving the installation supervision, commissioning, maintaining, modification and repair of complex Schneider and other projects along with Engineer assigned.

· Responsible for a region or subgroup of services.

· Performs installation supervision and commissioning of Schneider products including day to day service of the same as per the direction of Engineer

· Performs maintenance for Schneider equipment

· Support Engineer to train customers on equipment’s operation and maintenance of Schneider products.

· Responsible for identifying and reporting failure modes encountered when in the field.

· Determining the cause of these failures along with assigned engineer.

· Solve Site problems at customers site and provides reports on these issues.

· Providing 24/7 support

What qualifications will make you successful?

· At least Diploma in Electrical Engineering.

· At least 1-3 years industry experience including a minimum of 12 months power experience with hands-on working on 415 ac 3 phase and MV panel up to 22kV

· Knoweldge in Power Systems MV equipments.

· Knowledge of controls logic, PLC, communication protocols Modbus/ profibus etc.

· Willing to travel within Singapore

· Demonstrated ability to function successfully across multiple cultures and nationalities

· Verbal and written communication skills in English are essential.

· Ability to interface with all functional areas of the company.

· Microsoft Office – Excel, Word and Power Point.

Computer literate and fluent in spoken English

Job Description:

• Execute sales activities and secure sales, including but not limited to spare parts, service agreements, ad-hoc projects etc.
• Daily monitoring and follow up with operation and administrative sections on customer work orders.
• Prepare customers’ quotation for Repair, Servicing, Visual Inspection or Load Testing queries.
• Maintain strong customer relationships through regular phone calls and meet-ups.
• To attend periodic meetings and produce weekly and monthly customer visits/ sales reports etc.
• Any other duties as assigned to you by the Management from time to time.

Requirements:

• Candidate to possess at least a NiTEC (electrical/mechanical preferred).
• Working experience in after-sales is an advantage.
• Great communication, teamplayer and interpersonal skills.
• Sales and result-driven, self-motivated mindset.
• Possess class 3 license and own vehicle (preferred).
• Proficient in MS office.
• Experience with material handling equipment / hydraulic lifting platforms / docklevelers is an advantage.

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Job Description

• Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training
• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation
• Supervise preventive and corrective maintenance carried out for all plant equipment and plant utilities
• Perform frontline troubleshooting on plant equipment defects and failure to maintain high availability
• Provide necessary guidance and advice to maintenance staff or external contractor to execute the maintenance work in a good engineering manner
• Daily maintenance manpower planning and allocation
• Maintain and update maintenance data and maintenance record for all plant equipment and plant utilities
• Check that PPE are provided and subordinates are utilizing it by executing works with all safety precautions
• Additional tasks and responsibilities given by power plant management

Job Requirements

• Degree in Engineering
• Minimum 5 years work experience with equipment related to craft
• Knowledge in craft eg, Pumps, Compressors, HRSG , Valves , Fans and etc
• Experience involvement in technical aspects of Power Plant or Process Plant maintenance
• Good hands-on knowledge in performing Power Plant or Process Plant equipment maintenance
• Experience in the erection, commissioning and initial start-up phases of a modern Power Plant is an advantage
• Knowledge on system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on vibration monitoring and alignment of rotating equipment
• Knowledge on lubrication
• Knowledge in maintaining maintenance record in CMMS

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

We regret that only shortlisted candidates will be notified.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

We regret that only shortlisted candidates will be notified.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

Job Responsibilities

• Assist Shift Manager to ensure safe shift operation of the assigned plant and manage non-operating activities and co-ordination with internal and external stakeholders on operating requirements to facilitate the smooth operation of the power plants and in compliance with regulatory and company standards and requirements
• Become a pro-active member of the Station Team
• Support the SCE; PSCE and Operations Manager to meet the contractual, technical and commercial set-up and operation of the Power Station
• Input to and liaison with the relevant Managers for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Act as Senior Authorized Person (SAP) in preparing, reviewing and issuing PTW (Permit To Work)
• Able to support the team during plant emergency situations and abnormal conditions
• To assist operation team to comply with PSO/SPPG/NGCC requirements and procedures
• To support SCE/PSCE to ensure plant load output according to Trader dispatch schedule
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Able to manage, monitoring and control the plant process operation from control room DCS
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the Operations Manager, PSCE and SCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• A Degree in Mechanical / Electrical / Control & Instrumentation Engineering preferred. Candidates with Diploma or NITEC qualifications with substantial experience in a similar role will be considered
• Minimum 6 years of Lead Technical Officer/ Operations Engineer ground experience in Power Station Operations on a CCPP
• Solid understanding, knowledge and experience of Combined Cycle Power Station operations
• Good understanding of Power Station commercial operation strategies in a deregulated electricity market and familiar with CCPP and Cogen performance analysis and optimisation
• General understanding of Power Station engineering design and construction is essential. Prior involvement in the technical and maintenance aspects of Gas Turbines and in the erection, commissioning and initial start-up phases of a modern Power Station will be valuable
• Strong safety mindset with detailed knowledge and experience in modern Health, Safety and Environmental practices
• Strong team-player with the ability to lead a specialist shift team and manage numerous personnel during critical plant outage periods

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

We regret that only shortlisted candidates will be notified.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

Job Description

• Operate the power plant according to procedures and technical requirements but not limited to starting up and shutting down the entire plant and plant auxiliary systems.
• Support the ASCE/SCE/PSCE/SM to meet the contractual, technical, and commercial set-up and operation of the Power Station.
• Have adequate knowledge of the safe operating parameters, controls, precaution, and safety interlocks when operating plant equipment. in the most efficient manner.
• Support team leader for plant process conditions troubleshooting, analyzing, and testing when necessary.
• Able to manage, monitoring and control the plant process operation from DCS in main control room.
• Responsible for daily plant operations activities, operating data recording; report defects and abnormalities according to approved work instructions.
• Responsible for safe execution of mechanical and electrical. Isolation/Normalization of equipment as required by the Permit To Work.
• Understand and familiar with plant chemistry including handling water treatment plant and electro-chlorination plant operations.
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices.
• Support the shift team in monitoring the running unit performance and maintaining optimum operations efficiency.
• Assist to implement a Quality Management System as applied to the Power Station.
• To assist fully with and help implement and manage all Health, Safety and Environmental practices.
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE/SM.
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time.

Job Requirements

• Higher National Diploma or Certificate is preferred in a relevant engineering discipline. Relevant Competency certificate as issued by the Singapore regulatory authority, or education leading to this.
• Preferably Diploma or technical certification in Mechanical/Electrical Engineering, or equivalent qualifications. Higher NITEC candidates may also be considered.
• Diploma holder with 2-3 years’ experience in Combined Cycle Power Plants or related industries.
• Higher NITEC with 3-5 years’ experience in Combined Cycle Power Plants or related industries.
• Fresh graduates are encouraged to apply.
• Preferably understanding, knowledge and experience of Combined Cycle Power Station operations. Basic knowledge of Power Station commercial operation. Basic understanding of CCPP performance optimization.
• Candidates with steam boiler attendant or engineer certificate of competency will be an advantage.
• Self-motivated, independent, possess a good communication skill, and is a team player.
• Possess good knowledge & experience of plant processes and operations.
• Knowledge and experience in Health, Safety and Environmental practices.

You will join a dynamic team that is responsible for the marketing and launching of Creative products online. As a Brand / Product Champion, your primary role is to define and execute digital marketing and brand strategies for products under the Creative / Sound Blaster family. This includes content creation for product pages, product videos, social media posts, and other outreach materials relating to product launches.

You will conceptualize, develop, and execute product launch campaigns for the target audience on Creative suite of sites and through digital marketing channels like email marketing, social media marketing, and search engine marketing. To generate brand and product awareness, building strong and collaborative relationships with the press, key opinion leaders and influencers will also be an integral element of the role.

You should be well acquainted with the latest digital marketing trends, including search engine optimization and industry best practices, and be on top of web UX and UI trends. You should also have a curious mind about the audio industry and be proactive in learning independently—this includes being familiar with the competitive landscape, industry trends, product differentiation, and the technical know-how on how key technologies work and how our audio products function with various platforms such as PC and gaming consoles.

Requirements:

1. Diploma or Degree in Engineering/Business/Marketing or equivalent
2. Proficient in translating complex technical concepts into compelling content
3. Strong technical knowledge in audio and consumer electronic products
4. Good understanding and working experience of digital marketing tools, including SEO / SEM / Google Analytics / GSC and other insights tools
5. Strong command of English in presentation and writing
6. Well-versed with digital marketing knowledge and social media platform
7. Well-organized and proficient in project management skills
8. Positive attitude and keen interest in hands-on execution
9. Independent and self-motivation. Enjoys challenges and takes ownership of tasks. Open to take on new, unfamiliar and complex tasks or projects.

Summary

Responsible for identifying new leads/accounts/channels within the Chromatography products/territory markets and to meet/exceed the set goals. Be the contact point of communication supporting and resolving all accounts enquiries. Execute pre-sales and post sales activities.

Key accountabilities

Overall

• Responsible for orders and revenue growth of Chromatography products in Singapore.
• Develop and maintain good business partnership with all customers.
• Network actively with the scientific community to understand the current and future market trends.

Pre-sales (70%)

• Build funnels via account planning, mapping and data analysis to provide accurate forecast and sales strategy.
• Develop and execute go-to-market strategy.
• Work with other sales members to ensure offerings of total solutions and presenting to new and existing customers.
• Understand market trends and competitive situation.
• Faithful in updating sales opportunity records in CRM/Salesforce.com.

Post sales (30%)

• Conduct training and responsible for collateral development, joint customer visits and regular communication.
• Conduct after sales activities by providing technical and software training, method set-up and responding to customers’ queries.

Requirements

• Degree specialized in Chemistry or related scientific disciplines / MBA / PhD.
• 3 to 5 years sales experiences in a related industry.
• Mix of technical field experiences and customer facing roles.
• Good interpersonal, communication, presentation and negotiation skills.
• Highly motivated individual who can be a team player, assertive and result oriented with drive and high energy.
• Customer service oriented.
• Confident decision maker with good business acumen.
• Proficient in MS office and SFDC.
• Proficiency in QS3 usage is an added advantage.
• Proficient in training material development for internal and external use.

Job Description

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Job Scope and Duties include:

a) Monitoring of incoming emails and request for quotation and other administrative duties.

b) Study the Tender Documents to determine the Irrigation Scope of Works & Subsequently submit / respond to Tender Clarifications, Tender Addendums, etc.

c) Undertake Material Take-Offs and Bill of Quantities for the purpose of preparing proposals and tender submissions.

d) Drafting out the irrigated area using ACAD software, determine the water source, read the irrigation specification and outline the specific scope of works of each project.

e) Work out a preliminary irrigation design during proposal stage.

f) Prepare draft quotations including draft pricing based on standard rates.

g) Work together with Administration Staff to ensure all emails and quotation are addressed and sent out.

h) Follow-up on Tender corrigendum, addendums, clarifications and amend quotations if necessary.

i) Follow-up with Main Contractor’s QS during Tender Stage.

j) Assist the Project Management Team in claim submission and follow-up of regular payments.

k) Attend safety course, serve as a safety co-ordinator, prepare and submit safety submission and address all other site safety related issues.

l) Other duties as assigned by the company.