Job Responsibilities: -

1. Supervise motor inspection and overhaul service work to ensure efficient and effective maintenance work, compliance with safety regulations and quality standards.

2. Conducting motor assembly, testing, and problem solving. Determine the motor status based on test results and issue motor test reports.

3. Improve work method, quality management systems, and workflow to enhance maintenance processes.

4. Provide technical support for motor pre/post-sales activities, including technical knowledge training for customers, ensuring customer satisfaction.

5. Develop and implement motor inspection, maintenance, and diagnostic plans for products, providing field technical guidance and process supervision.

6. Perform motor fault diagnosis, including vibration analysis, temperature monitoring, electrical testing, and insulation checks, etc.

7. Analyze and resolve motor-related problems to ensure optimal performance and reliability.

8. Train and upgrade the skills of workers in motor maintenance processes, including testing, assembly, insulation, repair, etc.

Requirements:-

1. Degree in Electrical Engineering or related field (preferred). Hands-on experiences in motor overhaul maintenance and technical support.
2. Possess years of experiences in motor repair and testing, diagnostics and troubleshooting.
3. Familiar with the maintenance, overhaul and testing of various high-voltage and low-voltage motors.
4. Preferably with class-3 driving license.

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

The role is based in Ang Mo Kio, Singapore.

Job Duties:

• Perform Calibration and Measurement of Dimension gauges and instruments as per WI using CMM, reference master, tester etc (on-site and in-house) with report and necessary administrative work
• Conduct routine maintenance and calibration of lab equipment as schedule and assigned
• Ensure proer delivery of service to customer(s)
• Help manager to manage day-to-day calibration work in the labs reference to ISO17025 standard, eg. Quality/ Job Planning/ Job Assignment/ Customer Requirements etc
• Any other duties as assigned by Manager/ Section Head/ Senior staff

Job Requirements:

• Diploma/ Degree in Aerospace/ Precision or Mechanical Engineering
• 3 years or more experience in Calibration and Measurement of Dimension is preferred
• Working knowledge of laboratory safety
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Responsibilities:

• Answering customer inquiries, scheduling meetings, and sales appointments, and following up with customers about their order status.
• Compiling a daily list of sales leads, delegating leads to the sales department, and providing sales data and guides to the sales department.
• Developing and monitoring performance indicators for sales and staff members, managing sales tracking tools, and compiling reports.
• Creating and processing orders in a timely manner, sales quotation, processing requests for urgent orders, and reviewing pending orders and customer requests to ensure customer satisfaction.
• Managing customer accounts, following up with customers for administrative purposes, and providing troubleshooting assistance for orders, account statuses, and other problems.
• Performing data entry tasks for sales figures, metrics, and other relevant information and maintaining an organized and accessible filing system.
• Handling administrative duties for the company and its executives and management teams.
• Arrange logistics delivery of equipment.
• Reporting any unusual activity to your supervisors.

Requirements:

• No experience required
• Fresh graduates are welcome to apply
• Business-focused with a sales-oriented and customer-success-driven mindset
• Have good communication skills in English
• Proven ability to work independently and effectively in an office-based environment.
• Ability to multitask, work under pressure to meet deadlines, and handle long hours during month-end closing period
• Sensitive to business needs, at the same time ensuring high quality output and full compliance Willingness to acquire new skills/ product knowledge
• Team player with good interpersonal skills

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Job Description:

· Preparing and send quotation to customer in a timely manner

· Revise or change quotation details upon request from customer

· Maintaining and updating records in SAP CRM accurately

· Keeping track of the sales team’s communication with customers

· Support in following up sales lead and opportunities in SAP CRM for sales team

· Ability to communicate both internal and external customers at all levels

· Support any other ad-hoc duties as assigned by manager

Requirements

· Some experience in commercial practice and sales admin experience

· Understanding in SAP CRM is a plus attribute

· Proficient in Microsoft Office

· Adaptable, multi-tasking, good organisational skills

· Ability to adapt to fast pace working environment

· A good team player

· Good command in English and Chinese

· ITE/ Diploma equivalents

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

• Site & office project management and daily operations including inspections, handover, site measurements, project management
• Handling technical and engineering issues
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Liaison and meeting with client's representatives, relevant authorities and consultants
• Site co-ordination, monitoring and report work progress
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of projects
• Conduct site check on the repair works, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions

Job Requirement:

• At least Diploma, Advanced Diploma, Bachelor’s Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent
• 0 - 2 Year(s) of experience in sales of products & services, preferably in Engineering Industry
• Good communication skills and networking skills
• Self-drive & motivated individual
• Salary will be paid based on experiences and qualifications

Job Summary

We are looking for a motivated Assistant Engineer to join our team. You will be responsible for servicing, troubleshooting, and testing of gas detector, ensuring minimal disruption to customer operations. Training and professional development opportunities will be provided.

Job Description

• Servicing of Gas Detectors and other measuring equipment.
• Ability to trouble-shoot of different brand Gas Detectors and other measuring equipment.
• Testing of Gas Detectors and other measuring equipment.
• Coordinate with customers to ensure committed service work scopes are executed without business interruption.
• Certificates generation and Report generating on all service-related activities.
• Adhere to all legal, customers' and company's safety protocol, rules, and regulations, ensuring the safety of personnel, equipment and property, and housekeeping.

For this role, you will need to maintain a good relationship with customers to always achieve positive customers’ satisfaction. The Department Manager and/or Snr. Lead Engineer will assign ad-hoc tasks as and when required.

A team player and work closely with the technical team.

On-the-Job training will be provided, and in-house/principal training will be arranged for the successful hired.

Job Requirement

• Min. Nitec in Electrical/ Electronic Engineering discipline.
• Preferably with 1 year of working experience in Gas Detector servicing or maintenance. However, fresh candidates with no relevant experience are welcome to apply!
• Good communication and interpersonal skills.
• Willingness to learn. Good working attitude. A team player.
• Possessing a Class 3 driving license is a plus.

We regret to inform you that only shortlisted candidates will be contacted.

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

• Assist in the planning and scheduling of construction activities.
• Coordinate with architects, subcontractors, and suppliers to ensure project specifications are met.
• Conduct site inspections to ensure compliance with safety and quality standards.
• Supervise and manage on-site construction activities.
• Monitor project progress and provide regular updates to the project manager.
• Ensure all materials and workmanship meet the required standards and specifications.
• Implement and enforce health and safety protocols on the construction site.
• Conduct safety audits and inspections to ensure a safe working environment.
• Prepare and submit reports on project status, costs, and any issues or delays.
• Liaise with clients, architects, engineers, and other stakeholders to ensure smooth project execution.
• Attend project meetings and provide updates on construction progress and challenges.

Requirements

• Required language(s): Chinese, English (in order to liaise with the English & Chinese speaking associates)
• Graduate with no experience welcome.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Good team player and problem solver.

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

Job Responsibilities

• Involve in the analysis, design, documentation, coding, and testing of our applications
• Performing unit and integration testing
• Conducting functional and non-functional testing
• Troubleshoots production problems related to software applications
• Resolves problems and responds to suggestions for improvements and enhancements
• Evaluating current applications to update or add new features
• Ability to work independently on assigned tasks.
• Assist with project plan time estimates and ensure development milestones are met
• Performs any additional duties assigned by the immediate supervisor or senior management

Job Requirements

• Candidate must possess at least a Diploma and above
• At least 1 Year(s) of working experience in the related field is required for this position
• Required Skill(s): Well-versed in ASP.Net (MVC) and knowledge of Microsoft SQL.
• Ability to thrive in a fast-paced environment

Are you an experienced Commissioning Engineer and do you want to leave your mark on the global energy industry? If so, we want to hear from you!

Semco Maritime in Singapore is looking for commissioning engineers as an expansion of our engineering team engaged in Telecommunication Systems – PAGA, PABX, CCTV, GMDSS Radio System, VSAT System, UHF Repeater System etc. solutions for the Offshore and Onshore Oil & Gas Industry.

Job Tasks

You will be involved primarily in fabrication, installation, and commissioning of telecommunication systems.

You may also be required to assist lead engineer / project manager in the daily execution of ongoing projects.

Qualifications/Requirements:

• A Degree in Telecommunication / Electrical / Electronic Engineering.
• Some relevant working experiences in the Oil and Gas industry would be advantageous.
• Strong knowledge in various Telecommunication Systems, especially one or two of following:

1. GMDSS Radio
2. VHF Aeronautical Radio and Helicopter Navigation Beacon e.g. NDB
3. UHF Active Repeater System with TX & RX Combiners
4. Crane & Life Boat Radios
5. Leaky Feeder and Passive Antenna
6. VSAT Systems with Stabilized Antennas
7. ENT/IPTV & TVRO Systems with Stabilized Antennas
8. CCTV Systems
9. PAGA systems
10. PABX systems
11. LAN/WLAN and IP-PABX Systems
12. EPOB System
13. ENV/HMS & Weather Monitoring Systems
14. PNS, P.R.S. & Navigation Systems
15. TNMS System
16. Telecom Shutdown Systems

• Hands-on experience on configuration, programming, troubleshooting, installation and commissioning of the above systems
• High responsibility and ownership on delivering high quality work within given project schedule
• Ability to multi task and work under pressure
• Team player with cooperation spirit and excellent coordinating skills, as well as capable of working independently
• Pro-active and have right working attitude
• Self-motivating and willing to learn
• Possess good interpersonal, communication and technical writing skills.
• Knowledge of application software e.g. Word, Excel, AUTOCAD etc.

You will be part of a dynamic worldwide team of engineers which will require your ability to work, and cooperate with local engineers as well as Semco’s engineers around the world.

Please send us your resume with the wording “Commissioning Engineer, Telecommunication” in the subject field, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

We regret that only shortlisted candidates will be notified.

Welcome to Semco Maritime

At Semco Maritime, we create change. For people. For projects. And for the global energy sector. With us, you will join a community of over 2,200 of the most dedicated thinkers and doers in the energy industry who are driving real change and making their own personal mark on the global energy landscape.

While everyone knows why the energy transition is vital, we are concerned with the journey. How to get there. By providing the answers needed to make change real. Because we believe that global energy ambitions can only be realized through hard work and clever pragmatic solutions. This is what we do. This is what we invite you to

participate in.

So yes, working for us will change the energy sector – and may well change you too.

Care to join the movement?

Change. With us.

handle drawings

allot jobs for project incharge

follow up with client

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628