1. Site Assessment and Surveying for Pipe and Cable Laying:

• Conduct pre-construction surveys to assess the site and determine the appropriate locations for laying pipes and underground power cables.
• Assist in identifying underground utilities (water pipes, gas lines, etc.) to prevent damage during excavation.
• Work with survey teams to accurately mark the locations where cables and pipes will be laid, ensuring alignment with design plans.

2. Planning and Designing Cable and Pipe Routes:

• Assist in the planning and design of the trenching paths for power cables and pipes, ensuring minimal disruption to existing infrastructure.
• Help in determining optimal trench depths and layouts based on soil conditions, safety standards, and project requirements.
• Coordinate with senior engineers to ensure that the routes for pipes and cables comply with regulatory guidelines and safety standards for utility installations.

3. Excavation and Trenching:

• Supervise the excavation and trenching work, ensuring that the trenches meet the required depth, width, and slope for cable and pipe installation.
• Monitor the use of heavy equipment (excavators, trenchers) to ensure efficient and safe excavation operations.
• Ensure safety measures are in place, including trench support systems (shoring) to prevent trench collapses during excavation.
• Oversee the removal of excess soil and its proper disposal or reuse in line with environmental standards.

4. Pipe and Cable Laying:

• Assist in laying power cables and pipes in the prepared trenches according to the project specifications.
• Ensure that pipes are joined, sealed, and tested for leaks before backfilling, particularly for conduits carrying fluids (e.g., water pipes for cooling systems in substations).
• Monitor the correct installation of power cables, ensuring proper handling to avoid damage to the cable insulation or protective sheathing.
• Oversee the use of protective coverings or conduits to shield cables from physical damage and environmental exposure.

5. Backfilling and Soil Compaction:

• Supervise the backfilling of trenches after cable and pipe installation, ensuring that the soil is properly compacted to prevent future settlement.
• Ensure that backfill material meets the required specifications for soil type, compaction levels, and moisture content.
• Assist in conducting compaction tests to verify that the backfill meets project and safety standards.

6. Road Reinstatement and Restoration:

• Assist in restoring roads and pavements that were disturbed during pipe and cable laying activities.
• Oversee the reconstruction of road surfaces, ensuring that they match the original grade and finish before construction.
• Ensure proper asphalt or concrete pouring, leveling, and compaction for road reinstatement, so that road surfaces are durable and safe for traffic.
• Coordinate with local authorities to ensure that the restored roads comply with municipal standards for roadways and pedestrian paths.
• Monitor drainage systems around roadways to prevent water pooling or erosion following reinstatement.

7. Coordination with Other Teams:

• Collaborate with electrical engineers to ensure proper integration of underground power cables with the broader power grid infrastructure.
• Coordinate with plumbing and mechanical teams when laying pipes that are part of cooling systems, water distribution, or drainage networks.
• Liaise with contractors and municipal authorities to ensure that traffic management plans are in place during road reinstatement and that road closures or detours are properly handled.

8. Quality Control and Testing:

• Assist in performing tests on installed cables and pipes to ensure they are free from defects and meet project specifications.
• Conduct continuity tests and insulation resistance tests on power cables to ensure electrical integrity.
• Verify that pipes are tested for pressure resistance and that there are no leaks or weaknesses.
• Ensure material quality control for backfilling, paving, and sealing during road reinstatement.

9. Environmental and Safety Compliance:

• Implement erosion control measures around the trenches to prevent soil erosion during and after excavation.
• Ensure that stormwater management systems (e.g., drainage channels) are maintained and unaffected by excavation activities.
• Ensure compliance with environmental regulations for pipe and cable laying, especially if working near sensitive areas like water bodies, wetlands, or protected land.
• Assist in developing and enforcing safety protocols, such as proper trenching safety, safe equipment operation, and PPE requirements.

10. Project Scheduling and Coordination:

• Assist in scheduling activities for pipe and cable laying, ensuring that they are aligned with the overall project timeline.
• Track and report the progress of earthworks, including excavation, cable laying, and road reinstatement, to senior engineers and project managers.
• Coordinate with traffic management teams and local authorities to minimize disruption to public roads during construction activities.

11. Record Keeping and Documentation:

• Maintain detailed records of cable and pipe locations, ensuring that all underground utilities are mapped accurately for future reference.
• Document the progress of earthworks, including trenching, pipe and cable installation, and road reinstatement.
• Prepare and update as-built drawings to reflect any changes made during construction, particularly for future maintenance and upgrades.

12. Utility Detection and Risk Management:

• Help identify existing underground utilities before excavation to avoid accidental damage to water, gas, or telecommunications lines.
• Use tools such as ground-penetrating radar (GPR) or utility locators to ensure safe excavation.
• Assist in mitigating risks associated with working near high-voltage cables or other hazardous infrastructure during excavation and cable laying.

Skills and Competencies for Power Grid Earthwork Projects Involving Pipe and Cable Laying and Road Reinstatement:

• Trenching and Excavation Expertise: Knowledge of trenching techniques, depth requirements, and safety standards.
• Underground Utility Installation: Familiarity with laying underground power cables and pipes, including the materials and methods used to protect them.
• Road Construction and Reinstatement: Understanding of asphalt or concrete road construction techniques, grading, and surface restoration.
• Safety and Environmental Compliance: Knowledge of safety regulations related to trenching and excavation, as well as best practices for environmental protection.
• Surveying and Mapping Skills: Ability to assist with surveying and mapping to ensure accurate installation and future reference for utilities.
• Project Coordination: Skills in coordinating work with other teams and managing timelines for cable laying, pipe installation, and road reinstatement.

For a role that specifically involves handling mechanical devices, assisting in repairs, and supporting senior engineers, an Assistant Mechanical Engineer may include the following key responsibilities:

Roles and Responsibilities:

• Operate and manage various mechanical tools and devices such as pumps, motors, gear systems, compressors, and engines.
• Assist in assembling, disassembling, and installing mechanical equipment.
• Regularly monitor the performance of mechanical devices and systems to ensure proper functionality.
• Perform routine maintenance and repair work on mechanical systems and equipment, under the supervision of senior engineers.
• Diagnose issues, identify faulty components, and replace or repair malfunctioning parts.
• Document and track the maintenance and repair history for each device or system.
• Use troubleshooting techniques to resolve mechanical breakdowns, including using tools such as multimeters, calipers, torque wrenches, and diagnostic software.
• Provide technical assistance to senior engineers.
• Collaborate in creating technical reports, documents, and diagrams based on project specifications or field data.
• Ensure the mechanical devices are properly installed and integrated with other systems..
• Adhere to all safety guidelines and protocols during the operation and repair of mechanical systems.
• Ensure mechanical devices are in compliance with industry standards, safety regulations, and environmental norms.
• Assist in sourcing, handling, and organizing materials and spare parts required for repair and maintenance.
• Ensure spare parts inventories are well-stocked and accessible for future repairs.
• Work alongside other departments, such as electrical and civil engineers, to ensure smooth integration of mechanical systems into larger projects.
• Provide real-time support during troubleshooting activities and system upgrades.

Skills and Competencies:

• Qualification in Mechanical Engineering.
• Strong mechanical aptitude and familiarity with mechanical devices and tools.
• Hands-on experience in troubleshooting, repairing, and maintaining mechanical systems.
• Good communication skills to report and assist senior engineers effectively.
• Ability to follow safety standards and procedures in repair work.

1. Site Assessment and Surveying for Pipe and Cable Laying:

• Conduct pre-construction surveys to assess the site and determine the appropriate locations for laying pipes and underground power cables.
• Assist in identifying underground utilities (water pipes, gas lines, etc.) to prevent damage during excavation.
• Work with survey teams to accurately mark the locations where cables and pipes will be laid, ensuring alignment with design plans.

2. Planning and Designing Cable and Pipe Routes:

• Assist in the planning and design of the trenching paths for power cables and pipes, ensuring minimal disruption to existing infrastructure.
• Help in determining optimal trench depths and layouts based on soil conditions, safety standards, and project requirements.
• Coordinate with senior engineers to ensure that the routes for pipes and cables comply with regulatory guidelines and safety standards for utility installations.

3. Excavation and Trenching:

• Supervise the excavation and trenching work, ensuring that the trenches meet the required depth, width, and slope for cable and pipe installation.
• Monitor the use of heavy equipment (excavators, trenchers) to ensure efficient and safe excavation operations.
• Ensure safety measures are in place, including trench support systems (shoring) to prevent trench collapses during excavation.
• Oversee the removal of excess soil and its proper disposal or reuse in line with environmental standards.

4. Pipe and Cable Laying:

• Assist in laying power cables and pipes in the prepared trenches according to the project specifications.
• Ensure that pipes are joined, sealed, and tested for leaks before backfilling, particularly for conduits carrying fluids (e.g., water pipes for cooling systems in substations).
• Monitor the correct installation of power cables, ensuring proper handling to avoid damage to the cable insulation or protective sheathing.
• Oversee the use of protective coverings or conduits to shield cables from physical damage and environmental exposure.

5. Backfilling and Soil Compaction:

• Supervise the backfilling of trenches after cable and pipe installation, ensuring that the soil is properly compacted to prevent future settlement.
• Ensure that backfill material meets the required specifications for soil type, compaction levels, and moisture content.
• Assist in conducting compaction tests to verify that the backfill meets project and safety standards.

6. Road Reinstatement and Restoration:

• Assist in restoring roads and pavements that were disturbed during pipe and cable laying activities.
• Oversee the reconstruction of road surfaces, ensuring that they match the original grade and finish before construction.
• Ensure proper asphalt or concrete pouring, leveling, and compaction for road reinstatement, so that road surfaces are durable and safe for traffic.
• Coordinate with local authorities to ensure that the restored roads comply with municipal standards for roadways and pedestrian paths.
• Monitor drainage systems around roadways to prevent water pooling or erosion following reinstatement.

7. Coordination with Other Teams:

• Collaborate with electrical engineers to ensure proper integration of underground power cables with the broader power grid infrastructure.
• Coordinate with plumbing and mechanical teams when laying pipes that are part of cooling systems, water distribution, or drainage networks.
• Liaise with contractors and municipal authorities to ensure that traffic management plans are in place during road reinstatement and that road closures or detours are properly handled.

8. Quality Control and Testing:

• Assist in performing tests on installed cables and pipes to ensure they are free from defects and meet project specifications.
• Conduct continuity tests and insulation resistance tests on power cables to ensure electrical integrity.
• Verify that pipes are tested for pressure resistance and that there are no leaks or weaknesses.
• Ensure material quality control for backfilling, paving, and sealing during road reinstatement.

9. Environmental and Safety Compliance:

• Implement erosion control measures around the trenches to prevent soil erosion during and after excavation.
• Ensure that stormwater management systems (e.g., drainage channels) are maintained and unaffected by excavation activities.
• Ensure compliance with environmental regulations for pipe and cable laying, especially if working near sensitive areas like water bodies, wetlands, or protected land.
• Assist in developing and enforcing safety protocols, such as proper trenching safety, safe equipment operation, and PPE requirements.

10. Project Scheduling and Coordination:

• Assist in scheduling activities for pipe and cable laying, ensuring that they are aligned with the overall project timeline.
• Track and report the progress of earthworks, including excavation, cable laying, and road reinstatement, to senior engineers and project managers.
• Coordinate with traffic management teams and local authorities to minimize disruption to public roads during construction activities.

11. Record Keeping and Documentation:

• Maintain detailed records of cable and pipe locations, ensuring that all underground utilities are mapped accurately for future reference.
• Document the progress of earthworks, including trenching, pipe and cable installation, and road reinstatement.
• Prepare and update as-built drawings to reflect any changes made during construction, particularly for future maintenance and upgrades.

12. Utility Detection and Risk Management:

• Help identify existing underground utilities before excavation to avoid accidental damage to water, gas, or telecommunications lines.
• Use tools such as ground-penetrating radar (GPR) or utility locators to ensure safe excavation.
• Assist in mitigating risks associated with working near high-voltage cables or other hazardous infrastructure during excavation and cable laying.

Skills and Competencies for Power Grid Earthwork Projects Involving Pipe and Cable Laying and Road Reinstatement:

• Trenching and Excavation Expertise: Knowledge of trenching techniques, depth requirements, and safety standards.
• Underground Utility Installation: Familiarity with laying underground power cables and pipes, including the materials and methods used to protect them.
• Road Construction and Reinstatement: Understanding of asphalt or concrete road construction techniques, grading, and surface restoration.
• Safety and Environmental Compliance: Knowledge of safety regulations related to trenching and excavation, as well as best practices for environmental protection.
• Surveying and Mapping Skills: Ability to assist with surveying and mapping to ensure accurate installation and future reference for utilities.
• Project Coordination: Skills in coordinating work with other teams and managing timelines for cable laying, pipe installation, and road reinstatement.

JOB DESCRIPTION

1. Project management experience (with or without PMP certification)
2. Automation background & experience in manufacturing industry
3. Possesses Operation and Process Improvement experience, with demonstrated visible results
4. Fluent in English and Mandarin, as we have vendors and projects in China

CANDIDATE REQUIREMENT

1. Possesses Engineering Diploma, Degree from established tertiary institutions
2. Minimum 3 yrs of experience in manufacturing industry
3. Singaporeans and SPRs are welcome

Candidates who are keen are invited to send their resumes to [email protected]

We regret that only shortlisted candidates will be notified.

Job Summary:

Salary: Up to $3,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Toh Guan Rd (West)

AWS & VB

Job Responsibilities:

• To research and develop new products and services
• Researching about competitor’s products and evaluation of detailed function of their products.
• Conduct Market Research on products of Security System in ASEAN region
• Cooperate with Japan HQ R&D and China R&D center for product development.
• Conduct Survey about existing and future infrastructure, electrical power / telecom network etc. to ensure compatibility of security products and services.
• Provide support as Field Technical Specialist and visiting clients to check and maintain CCTV Surveillance System.
• Assist in obtaining required technical certifications for new / existing products for each countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards and company protocols.
• Conduct rigorous testing of all system components, including control panels, sensors, cameras, access readers, and communication devices.
• Simulate real-world security scenarios to identify and address potential vulnerabilities.
• Maintain detailed test records and reports for future reference.
• Analyze test results, identify and troubleshoot system malfunctions, and document findings clearly.
• Work collaboratively with manufacturer or distributor to resolve identified issues and ensure system optimization.
• Provide technical support to internal customers in ASEAN region.
• Conduct in-depth research on emerging security technologies and their potential application.
• Analyze market trends and customer needs to identify opportunities for finding suitable new product.
• Conduct research about standards like SS558, EN, IEC for ASEAN countries.
• Stay up-to-date on the latest security technologies and testing methodologies.

Requirements:
1. Minimum Diploma in Electronics

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Your primary role is to handle the planning and design of Civil and Geotechnical engineering works.
• Preparation of design calculations and technical drawings for Civil and Geotechnical Engineering projects.
• Determine operation requirements and improve production process.
• Assist with cost analysis, address operation related issues.
• Develop and/or maintain operation method, systems and processes.

Requirements:

• Bachelor Degree in Civil Engineering. Master Degree in Geotechnical Engineering or 2 years relevant experience will be an added advantage.
• Knowledge in application of Civil and Geotechnical Engineering design software.
• Reasonable command of English expected.

Job Description & Requirements

We are seeking a skilled and detail-oriented Engineer with at least 5 years of experience, proficient in AutoCAD and engineering material calculations. The ideal candidate will contribute to the design, planning, and analysis of engineering projects, ensuring accuracy and efficiency in every stage. Experience in the marine and offshore industry is highly desirable.

Key Responsibilities:

• Create and modify detailed technical drawings and plans using AutoCAD.

• Perform engineering material calculations and analyses to ensure compliance with industry standards.

• Collaborate with cross-functional teams to develop and optimize engineering designs.

• Review project specifications and technical drawings to ensure feasibility and accuracy.

• Provide engineering support to both office and production teams.

• Ensure all engineering projects comply with relevant safety and regulatory standards.

• Assist in the preparation of project reports and documentation.

Requirements:

• Diploma in Engineering or a related field (minimum requirement).

• At least 5 years of experience in an engineering role.

• Strong proficiency in AutoCAD and related design software.

• Proven experience with engineering material calculations.

• Knowledge and understanding of industry standards and safety regulations.

• Excellent problem-solving skills and attention to detail.

• Effective communication and teamwork skills.

• Experience in the marine and offshore industry is a strong advantage.

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Planning and deployment of resources such as manpower, machinery, equipment and material
• Preparation of progress report, Method Statements and technical submissions
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and ensure safety and housekeeping is maintain
• To perform Ad-Hoc duties as per assigned

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

Key Job Responsibilities:

• Work closely with Operations Department in project delivery to fulfil project requirements, preparing project drawings, proposals and technical submissions
• Coordinate with Professional Engineers for design calculations and endorsements
• Liaise with customers to prepare and submit drawings, calculations and submission documents
• Responsible for maintaining design and technical specifications of equipment and materials, project drawings and submissions
• Involved in annual ISO audit
• Undertake additional tasks and responsibilities when required or as instructed

Pre-Requisites:

• NTC or ITC or diploma in architecture or equivalent qualifications
• Experienced in AutoCAD 3D and BIM, and able to understand architectural and structural drawings
• Team player who is independent, organised as well as able to multi-task within tight deadlines with strong work ethics and communication skill

BROAD FUNCTION

To provide support to BME Head in medical equipment planning, technology evaluation, preparation of specification for ITQ/RFP, evaluation and commissioning of new medical equipment; as well as breakdown/preventive maintenance, and de-commissioning of medical equipment.

MAJOR DUTIES & RESPONSIBILITIES

Specific

1. Work with relevant user groups to prepare medical equipment specifications for ITQ / RFP; evaluate ITQ / RFP submissions and provide recommendations based on technical compliance
2. Review and make improvement to various programmes to ensure minimal disruption to operations and ensure medical equipment is safe for use at all times.
3. Provide technical support for commissioning, operation, maintenance and de-commissioning of medical equipment.
4. Supervise the specialist vendors and appointed contractors on medical equipment maintenance works to ensure quality of works and compliance to required standards.
5. Check, analyse and investigate faults / complaints / hazards on medical equipment and assist BME/FM Head in mapping out and implementation of required action plans.
6. Ensure quality of works conform to standards and practices that the hospital subscribes to, including other quality initiatives driven by hospital and department.
7. Support and assist BME Head in coordinating services for medical equipment projects together with IT, Consultants, vendors, contractors and appropriate authorities.

General

1. Work closely with BME team to support procurement activities and related projects to ensure smooth operation
2. Perform any other duties as assigned by BME Head.

JOB REQUIREMENTS

Education / Training / Experience

1. Degree in Biomedical Engineering, Electronic or equivalent, or Diploma with minimum 10 years’ working experience.
2. Relevant industry experience with minimum 5 years’ experience in similar capacity for Engineer. Relevant industry experience with minimum 7 years’ experience in similar capacity for Senior Engineer.

Attributes

i. Good interpersonal skills, able to communicate effectively to different stakeholders

ii - Familiar with Hospital BME functions and processes

iii - Fundamental IT knowledge OS, Cybersecurity and Microsoft office, etc.

Others

1. Required to be activated back on site during pandemic when necessary.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Maintenance Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Lead continuous improvement initiatives and activities using Total Productive Management (TPM) and Planned Maintenance (PM), implementing corrective, preventive, and predictive maintenance strategies.

· Oversee the daily functions and operations of the Maintenance Department.

· Offer engineering solutions to maintain and troubleshoot machinery and equipment, and plan, organize, and supervise preventive and routine maintenance programs.

· Experience with SAP integration/migration, and should be SAP administrator/expert level.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Finance/ Cost Control Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Draft and prepare correspondence letters for clients and subcontractors.

· Conduct tender reviews, cost estimations, and prepare tender packages for maintenance services and projects.

· Manage post-tender clarifications

· Understanding of CAPEX and project accounting

· Experience in statutory reporting

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a QA Operations Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Review and approval of product and/or raw material release.

· Quality oversight in manufacturing processes

· GEMBA walk and GMP walkthrough

· Revision, review, and approval of procedures (SOPs, forms, Manufacturing Batch Records)

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Salary: Up $4500

Industry: Engineering

Located at Woodlands

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Planning Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Optimizing inventory levels to reduce the impact of stock aging

· Analyzing historical data to identify abnormal forecast inputs and challenging internal product managers for forecast reviews

· Preparing and executing procurement proposals based on demand forecast input

· Cost/Budget Planning

· MPS,JDE, MRP, BOM experience is a must have

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Responsible for defining, optimizing, and documenting critical end-to-end processes across the value chain (Supply Chain Management) —such as order-to-cash, demand-to-supply, procure-to-pay, in-to-outbound, master data, and product lifecycle management. It focuses on the continuous enhancement of process quality through collaboration with process owners, experts, and relevant stakeholders. Additionally, this position oversees the effective and measurable execution and advancement of processes, monitoring the progress of initiatives against set objectives. Continual self-education in areas like digitalization systems and process/project management is essential, with the responsibility to disseminate this knowledge within the workplace as required.

JOB DESCRIPTION

1) Analyze current business processes to identify inefficiencies and areas for improvement. Map business processes to SAP modules (e.g., MM, SD, WM, QM, etc.). Propose process improvements and recommend SAP solutions.

2) Collaborate with stakeholders to gather, document, and validate business requirements. Translate business needs into functional specifications for SAP and MES systems. Conduct workshops and meetings with business users and technical teams.

3) Work with SAP functional consultants to configure SAP modules based on business requirements.

4) Develop the interface between SAP and MES with IT / OT Team. Help identify the need for custom developments, perform unit testing and support integration testing to ensure system functionality aligns with business needs.

5) Assist in project management and managing SAP / MES projects, from scope definition to delivery.

6) Develop and deliver training sessions to end users on how to use SAP applications effectively. Provide post-implementation support, troubleshooting issues, and ensuring the system meets ongoing business needs.

7) Create detailed documentation including process flows, use cases, and functional specifications. Maintain accurate records of system changes and ensure proper documentation is in place for future reference.

8) Improve the master data management under SAP. Create the dashboard for the business needs with Process Intelligence and Data Mining tools and Power BI (training will be provided)

CANDIDATE REQUIREMENT

1) Degree in Business Administration / Supply Chain Management/ Industrial Engineering or equivalent. Min 3 years’ experience, strong understanding of SAP modules and their business implications. Especially MM and SD.

2) Manufacturing background. Experience with Manufacturing Execution System.

3) Analytical and problem-solving skills.

4) Effective communication and interpersonal skills to interact with stakeholders.

5) Project management abilities.

6) Technical knowledge of SAP configuration, testing, and troubleshooting.

Candidates who are keen are invited to send their resumes to [email protected]

We regret that only shortlisted candidates will be notified.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Logistics Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Support the routine receiving of goods by processing receiving documents and submitting them for Quality approval (if required), while updating the JDE system.

• Operate a forklift or reach truck to place goods in storage after clearance.
• Transfer materials within warehouses and deliver them to users.
• Assist with outgoing shipments (e.g., samples, BDS).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Supply Chain Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Manage product flow from import to patient, ensuring end-to-end visibility

· Oversee product lifecycle management

· Handle vendor management

· Plan financial budgets and costs

· JDE system management is a must have

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a QA Validation Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Contribute to the Quality Systems team by overseeing validation activities, particularly related to Data Integrity issues.

· Collaborate with the Subject Matter Expert to assist the validation team in conducting gap analyses and risk assessments before qualification activities, and suggest mitigation plans for identified gaps.

· Engage in investigations of validation discrepancies, help review and approve discrepancy reports, and support the closure of related CAPA actions.

· Review and approve validation documents, including protocols and reports.

· Provide assistance with any validation-related queries and issues.

· Review and approve standard operating procedures (SOPs), forms, and other relevant documents, including Manufacturing Batch Records.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Our client, a well-known MNC company is looking for candidates for the Application Engineer position.

Responsibilities: -

• Identify and propose suitable / ideal equipment (pumps) based on customer's requirement
• Prepare bidding/tender documentation (technical proposal, quotation, etc)
• Liaise with sub-vendor (motor, coupling, etc) to obtain the proposal/quotation
• Attend clarification meetings as required
• Work closely with the sales team on the tendered projects

Requirements: -

• Degree in Mechanical or Electrical Engineering (preferred)
• Preferably 2-3 years related working experiences in Industrial field
• Comfortable to work in a team
• Willing to pick up new skills and able to adapt to new work environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E Registration No.: R22108058 (Lee De Cong)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Our client, a well-known MNC company is looking for candidates for the Project Engineer position.

Responsibilities: -

• Preparing, scheduling, coordinating, and monitoring assigned projects.
• Weekly work schedule report to management.
• Collaborates with the Japan HQ team and customers to identify and troubleshoot problems.
• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Independently manage multiple projects.
• Independently travel to sites for pump testing in South-East regions.
• Performs other related duties as assigned.

Requirements: -

• Degree in Civil / Mechanical Engineering or relevant engineering related
• Min 2 years of experience in Project Management
• Exceptional problem-solving abilities.
• Ability to work effectively as part of a team or an individual.
• Able to work under pressure.

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E Registration No.: R22108058 (Lee De Cong)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$4000

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various in-situ machines for precision work
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules