Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute, and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education, and our mission to Inspire Learning, Transform Teaching and Advance Research. Read more about NIE here.

The National Institute of Education (NIE) invites applications for a Senior Technical Specialist in Information Technology (IT) in the Learning Sciences & Assessment (LSA) Department. This role will provide you with the experience and opportunity to work in a dynamic department with faculty members, staff and students of NIE/NTU.

Job Description

We seek a highly organized and proactive Senior Technical Specialist in IT. The successful candidate will play a crucial role in leading and managing IT operations of the LSA department along with other Technical Specialist in the department and in collaboration with ACIS, NIE’s main IT department.

Key Responsibilities

• IT laboratories management: Lead and perform maintenance and upgrading (when necessary) of department’s IT assets (approximately 100 computers and 10 commercial applications).
• IT budgeting and purchases: Propose and monitor department’s IT-related budget.
• IT laboratories support: Provide classroom support to instructors in use of IT assets and educational technology applications.
• Emerging technologies support: Provide support for emerging technologies such as artificial intelligence for education.
• Curriculum support: Support course coordinators in e-learning contents management including AI/machine learning-related course materials.
• System administration: Manage and maintain department’s virtual servers in collaboration with ACIS, NIE’s main IT office.
• Web applications: Manage and maintain department’s web applications in collaboration with ACIS, NIE’s main IT department.
• Student research administration: Manage and archive department’s students research data.

Requirements

• A University degree in Information Technology or related field.
• Minimum of 2 years IT operations or development experience.
• Knowledge or experience in AI/machine learning and programming (Javascript, Python, etc.) strongly preferred.
• Ability to work independently and proactively.
• Ability to maintain confidentiality.
• This role requires overtime support for evening classes. We are seeking a candidate who is flexible and can adapt to varying schedules as needed.

Application

We regret that only shortlisted candidates will be notified.

Other Information

NIE staff can take chartered buses at their own expense from or near their homes to the NIE campus. This is subject to availability of seats.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Issue quotation for all Refuse Handling Equipment and & Refuse
Collection Vehicle, repair jobs.
◦ Email comprehensive maintenance quotation to customer and process renewal.
◦ Pass documents for billing to accounts department promptly.
◦ Assist maintenance and service team on documents.
◦ Reply to emails for breakdowns and repair jobs, promptly.
◦ Prepare and scan maintenance checklist monthly email to customer.
◦ Maintaining E -copies documents in the server and filing hardcopies.
◦ Prepare labour costing for accounts department, twice monthly.
◦ Update and check the maintenance schedules are completed.
◦ Coordinate with the technicians on the servicing schedules.
◦ Provide technician with details to attend emergency breakdown.
◦ Updating store on withdrawal of items under job numbers.
◦ Issue material/operation form, to purchasing department to order items, locally.
◦ Liaise with oversea suppliers for spare parts and follow up for shipment delivery.
◦ Perform ALL other service and maintenance administration for the Head of Service Department / Service Executive

· Global engineering consultancy with great career opportunities

· Opportunity to work on a variety of interesting projects both locally and internationally

· Friendly working environment across the business

About SJ

Surbana Jurong Group is a diverse collective of problem solvers for the built environment, continually reimagining ways to create a smart and sustainable future.

Headquartered in Singapore, the group has a global talent pool of 16,000 in Surbana Jurong and its member companies AETOS, Atelier Ten, B+H, CHIL, KTP, Prostruct, Robert Bird Group, SAA and SMEC, based in more than 120 offices in over 40 countries.

A global engineering consulting firm who provide specialist solutions across Buildings + Cities, Infrastructure + Energy and Integrated Solutions. Its technical experts deliver sustainable solutions that cover the entire project life cycle from planning and design, through to delivery and management, as well as a full suite of multidisciplinary consultancy services across a diverse range of sectors including transportation, water, aviation, healthcare, hospitality and renewables.

Job Responsibilities

· To prepare drawings for presentation, tender documentation, variation order and relevant submission.

a) Design sketches are checked for compliance with Technical Department / Authorities

b) Timeliness of schedule for drawing activities must adhere to the norm.

c) All approved design / feedback / comments arising from checking must be incorporated in the final drawings.

d) All drawings must be prepared in accordance to ISO Manual and other statutory requirements.

e) All computer-drawing files, including BIM drawings, must be cleaned and tidied upon completion of drawings

· To process design sketches / drawings and highlight on any non-compliances prior to commencement of working drawings. - All non-compliances must be resolved within the stipulated time frame.

· To submit drawings to the relevant Technical Department / Authorities as stipulated in the timeliness of schedule of activity.

a) Time frame of submission must meet the norm.

b) Type of drawings with the endorsements, documents and numbers of sets are submitted correctly.

· To discharge other relevant works / duties that may be assigned as and when. Duties must be carried out in accordance to work requirements.

· To co-ordinate and lead a team of draughtsmen on project basis as Drafting Project Team Leader.

a) Draughtsman involved in the project, must be briefed on the scope of work in the project.

b) Drafting works are planned and distributed evenly to all draughtsmen in the team

Job Requirements

· Diploma in Architecture or Equivalent

· Experienced in tender documentation, BIM and submissions to technical agencies.

· Proficiency in AUTOCAD and BIM modelling is a MUST with ArchiCAD preferred.

· Good knowledge in Architecture design & construction.

· Passionate, Team Player and willingness to learn

· Positive work attitude, responsible with good follow-up skills

As an inclusive and growing organisation, SJ is committed to building a global community of talented professionals and thought leaders.

We recognise the value and importance of a diverse and inclusive workplace and look for people with different backgrounds, skills and expertise to drive innovation and shared learning across our growing global network.

Key Roles and Responsibilities

• Perform routine laboratory tests using both wet chemistry methods and advanced analytical instruments.
• Ensure that tests are performed in a timely manner in accordance to Standard/Official Methods, Procedures, SOPs or in-house proprietary methods.
• Perform basic calibration and maintenance of laboratory equipment.
• Maintain laboratory housekeeping and ensure it is in audit-ready state at all time

Job Expectation

• attending to urgent work activation

Skills & Experience

• ITE in Chemistry, Chemical & Life Science, Environmental Science/Engineering, Food Science, Chemical Engineering, or chemistry-related discipline
• Fresh graduates are welcome (Training provided)
• Must be self-driven, team player with initiative and good communication skill.

Benefits

• Company transport is provided
• AWS & Variable Bonus is provided
• AL & Medical Benefits is provided

About Us:

Metalcool Pte Ltd is a dynamic company specializing in cutting-edge solutions for industrial applications. With a strong commitment to quality, innovation, and inclusivity, we provide a supportive environment where each team member is empowered to succeed and grow. We are looking for a detail-oriented, proactive Business Support Coordinator to join our team and support our operations in a role that values accuracy, independence, and efficiency.

Job Scope:

Daily document processing - Generate delivery orders and invoices accurately, ensuring timely documentation.

Accounts receivable - Generate monthly statement of accounts and routine accounts receivable duties.

Logistics coordination - consolidate and arrange daily deliveries with third-party logistics vendors, maintaining consistency and reliability of our delivery schedules.

Order processing - Process daily orders with precision, following established procedures.

Vistor and call management - Act as the first point of contact for walk-in visitors and incoming phone calls, providing professional assistance and direction.

Document and inventory management - Maintain document filing system in line with company standards, and monitor office supplies to ensure stock availability.

Requirements:

• Proficiency in English (written and verbal) for effective communication.
• Basic knowledge of accounting or bookkeeping is required to support accounts receivable duties.
• Familiarity with Microsoft Office is essential (in particular Outlook, Teams, Word and Excel).
• Previous experience with ERP systems is beneficial.
• Strong time-management and multi-tasking skills to manage daily tasks efficiently.
• Able to work independently, following established processes with minimal supervision.

Work Environment:

The role is based in a professional office within our industrial facility, providing a comfortable workspace that is separate from our production area.

NLCS (Singapore) believes that each employee makes a significant contribution to our success and that contributions should not be limited by the assigned responsibilities.

Therefore, this position description is designed to outline primary duties, qualifications, and job scope, but not limit the employee, nor NLCS (Singapore), to only the work identified. It is the expectation of the school that each employee will offer his/her services wherever and whenever necessary to ensure the success of our organisation.

Our School is committed to safeguarding and promoting the welfare of children and young people. The School expects all teaching staff, non-teaching staff and volunteers to share and uphold this commitment.

Knowledge and Understanding

• Possess the specialist learning support knowledge for the role to develop resources and strategies to enable student learning
• Have standard English and Maths competencies
• Understand SEN definitions and strategies

Student Support

• Collaborate as part of the Learning Support team in the implementation of strategies for students on the Individual Needs register
• Contribute to the production and review of Individual Needs Plans for students
• Assist identified students in bridging knowledge gaps
• In-class support with individuals/groups of children
• Work with small groups of children out of class to provide intervention support, for example in: english, maths, planning and fine motor skills
• Plan group work sessions in conjunction with the Head of Individual Needs
• Investigate and source resources that will support learning support planning
• Participate in departmental meetings and professional development that impacts on student’s learning
• Track the progress of individuals and groups of students and the effectiveness of intervention using intervention monitoring sheets
• Contribute to the departmental development plan
• Contribute to the termly Governor’s review

Communication

• Communicate with colleagues, and parents as appropriate, maintaining confidentiality and working with sensitivity
• Attending and contributing to meetings of a professional nature
• Regular meetings with Head of Individual Needs to monitor and evaluate provision, intervention and practice
• Contribute to providing feedback to students

General

• Maintain the department stationary stocks in all teaching areas and Learning Support Office
• Assist in the management of data, maintaining department registers
• Maintenance of the departments’ photocopying and laminating requirements, together with filing and notice board updates
• Contribute to the development and training of relevant support staff
• Complete the appraisal Target and Review Tracker in line with school policy
• Work in other departments of the school as circumstances require

Personal Attributes

• Experience working in a Learning Support role
• Enthusiastic, mature individuals with a positive attitude to supporting students, teachers and the wider NLCS (Singapore) community
• Pleasant disposition with excellent interpersonal skills, organisational and communication skills
• Able to work independently as well as a good team player with good initiative
• Have a disciplined approach to timekeeping and attendance
• Maintain a standard of personal presentation in keeping with the role

Pastoral Care

• Always consider students’ welfare and best interests, striving to promote both at all times.
• Develop strong relationships with students, providing guidance and support in academic, pastoral and enrichment matters.
• Liaise with and support colleagues in all matters pertaining to pastoral well-being, responsibility and strategy.
• Follow the school’s policies and procedures with regard to pastoral provision.
• Support students on the Learning Support register in class during special days, events, sports days, concerts, performances and during off site visits, as appropriate

Safeguarding

• Abide by the school safeguarding policy and keep abreast of any changes

Mandatory Skills

Job Overview​

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications​

​

Responsibilities and Duties​

​

· To coordinate in setting up Infrastructure and support Application Infra needs​

· Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards​

· Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary​

· Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects​

· Researching and recommending solution that best meet business needs and enterprise operational requirements ​

· Provide technical support to application development teams​

· Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact ​

Qualifications​

· Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms​

· Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases​

· Knowledge in Networking (F5 GTM/LTM or any other SLB)​

· 5 Years minimum professional experience and 3 Years minimum relevant experience​

· Experience in banking or financial services institutions preferred​

· Will need to work in shifts and in weekends​

· Team player to work with multiple teams and teammates​

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

Mandatory Skills

Job Overview​

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications​

​

Responsibilities and Duties​

​

· To coordinate in setting up Infrastructure and support Application Infra needs​

· Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards​

· Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary​

· Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects​

· Researching and recommending solution that best meet business needs and enterprise operational requirements ​

· Provide technical support to application development teams​

· Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact ​

Qualifications​

· Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms​

· Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases​

· Knowledge in Networking (F5 GTM/LTM or any other SLB)​

· 5 Years minimum professional experience and 3 Years minimum relevant experience​

· Experience in banking or financial services institutions preferred​

· Will need to work in shifts and in weekends​

· Team player to work with multiple teams and teammates​

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

​

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

We are looking for a highly motivated individual with software development experience, to join a software company as Team Lead - Application Support.

• Lead a team of engineers supporting world class custom software applications.
• Salary package up to $5,800 + AWS + VB (~2 months bonus).
• Dynamic working environment.

Responsibilities:

• Lead and run the 24/7 application support team for applications and systems.
• Ensures team members are providing necessary help to the end-users. Train the team members on the application logic/usage, interfaces and features.
• Solve critical issues of the application and system, guide and mentor team members.
• Ownership of all issues that are raised, through to closure within defined SLA.
• Build and maintain good rapport between stakeholders. Handle escalations and manage client expectations on an ongoing basis.

Requirements:

• Diploma/ Bachelor’s Degree in Computer Science or related.
• Minimum 3 years relevant working experience as a Software Developer/ Senior Application Support Engineer/ Team Lead.
• Strong analysis, research, investigation and evaluation skills, with a structured approach to problem solving
• Understanding of IT industry working practices / methodologies. ITIL certification is highly advantageous.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50052 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

JOB SUMMARY

Under general direction, the Technical Sales Manager is responsible for managing the technical sales aspects including segment, product line & technology packages, and all relevant technical supporting activities throughout the entire sales process. Successful activities include: collaborating within the sales organization on new customer opportunities, building strong customer relationships, technology training, collecting & analyzing customer/market insights to identify winning technology solutions, and supporting strategic sales growth initiatives. This is a key role within our organization advising and guiding the technical aspects of the sales process while working within a close collaboration with Global Technical Sales Managers (TSMs) to ensure alignment and leverage global insights and strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Build credible & strong relationships by focusing on:

• Advocating, coaching, and training for the segment, product line, and/or specific technology.
• Supporting sales growth opportunities, and proposal development, in a team selling approach with sales managers and sales support operations.
• Actively supporting sales activities: customer technology needs assessment, alignment with engineering standards, technology decision, product sizing, and strategic account planning.
• Face to face interactions with customers and identified markets we serve.
• Developing multiple relationships & communication pathways within a customer
• organization focused on Engineering and Plant Operations.
• Support conference strategies including technical presentations and booth support.
• Maintaining up-to-date understanding of industry trends and technical developments.
• Identifying opportunities & advise on available technology or service solutions.
• Clearly articulate Crown’s technology offerings and advantages.
• Obtaining and coordinating data and recommendations to Sales and Sales

• Segment and Product Line development:

• Collaborate with Global Segment Commercial Leads, Engineering, & other Technical Sales Product Managers to develop cohesive standard global product offerings.
• Develop & Manage standard product line sales tool-kits including sizing programs, sales flow diagrams, mass balances, and a library of sales presentations.
• Assist marketing collateral development on product lines and new innovations.
• Support technology discussions to close the deal in an efficient and professional manner.
• Deliver against sales goals by supporting Sales, Sales Support, & Aftermarket team members.
• Cross functional & global collaboration. Key technical tag for Aftermarket commercial support connecting inquiries into Sales & Engineering as needed.
• Deep understanding of technology/service value and total cost of ownership, TCO.
• Support new innovation launches with technical support & training.
• Contribute to all customer field reports after each customer visits.

• Develop testing protocols for customer piloting work as required.

• Perform other related duties as required and assigned.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in chemical, or mechanical engineering.

• Master’s degree preferred.

• 5+ years Engineering or Operations experience within the Oilseeds complex, preferably in an Oilseeds Crushing or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleochemical business.

• Demonstrated sales support experience.

• Strong Competitive desire to succeed & win.

• High integrity and ethics.

• Entrepreneurial spirit.

• Excellent written and verbal communication skills.

• Effective at problem solving and conflict resolution.

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Strong attention to detail.

• Technology advocate into customer focus.

• Establish and maintain effective working relationships with co-workers, customers, and vendors.

• Responsive to requests and inquiries from internal and external customers.

• Well-developed presentation skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, TEAMS and PowerPoint, SharePoint.

• Must be able to communicate in English fluently. Ability to communicate in a second language – European or Asian languages preferred but not required.

• Customer relationship management (CRM) experience a plus.

• Process Modeling experience – ChemCad, Aspen modeling a plus.

• Ability to travel internationally and domestically up to 25% of the time.

Job Scope

administration: Data Entry

• Accurately inputting information into a database or spreadsheet.
• Ensuring data accuracy and consistency.
• Assist HR, purchase, account department in administrative duties
• Any other job given
• Proficient in MS Office (Word, Outlook, and Excel)

Working Schedule

• 5 days work week
• 10 pm - 6pm

About Our Company

Established in 1991, Gan Teck Kar is a privately-owned company started by food-loving folks who are passionate about bringing the finest products from all around the world. Our core business is the importation and distribution of premium food products to Singapore and Malaysia with business partners all around the Southeast Asian Region.

Job Highlights / Benefits

● Free meals provided

● In-house gym

● Staff discounts

● Walking distance from Tuas Link MRT

Title:

E-Commerce Sales Support

Reports to:

Sales Manager

Introduction:

We are looking for a dynamic individual to support and drive our company’s e-commerce business for multi-brands across different marketplace platforms and online buyers.

Responsibilities:

• Responsible for the overall e-commerce sales on Shopee, Lazada, Amazon and Shopify.
• Responsible for daily e-commerce operations, including uploading and monitoring product information on the platforms.
• Ensure timely execution of order process management.
• Update stock count, monitor shipment & delivery of orders, assure on-time deliveries and update systems accordingly.
• Provide customer service to support the sales growth.
• Attend queries, resolve any concerns on their orders with minimum TAT, maintain accurate and timely records of correspondences or discussions with customers.
• Prepare monthly summary sales reports.
• Plan and execute e-commerce promotion campaigns.
• Work with in-house designers to prepare promotion banners, category banners and campaign artwork.

Requirements:

• Energetic, collaborative and results-oriented person with 1-2 years of sales experience in FMCG. Experience in handling e-commerce platforms is a bonus.
• Possess at least a Diploma in any field.
• Self-starter who is technologically savvy, organised and able to operate well in a team under pressure.
• Possess good analytical skills to evaluate sales reports to build competitive sales strategy and promotions for each platform.
• Proficient in Microsoft Office Suite (Excel, PowerPoint, Word).

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

As a Technical Sales Engineer, you will be the technical expert on SESTO Robotics' products, helping customers, partners, and integrators effectively integrate our Autonomous Mobile Robots (AMRs) into their specific applications.

Working closely with the engineering teams, your role will involve addressing customer challenges by offering tailored solutions that showcase the value of our products. You'll guide customers through the adoption process, ensuring seamless integration while providing technical know-how and driving successful implementations.

Specific Responsibilities:

1. Identify and Qualify Sales Opportunities:

- Actively identify and qualify new leads through market research, networking, and outreach activities.

- Assess customer automation needs and pain points to propose suitable Autonomous Mobile Robot (AMR) solutions, including payload and application-specific requirements.

2. Sales Strategy and Pipeline Management:

- Manage and monitor the sales pipeline, forecast revenue, and track performance against targets using CRM tools.

- Collaborate with cross-functional teams like Engineering, Marketing, and Customer Success to drive sales efforts and ensure alignment with customer needs.

3. Technical Proposal Development and Documentation:

- Create technical proposals, cost estimates, commercial offers, and tender documentation in consultation with internal technical teams.

- Address technical and commercial queries from customers to ensure clear understanding of proposed solutions.

4. Proposal Presentation and Negotiation:

- Prepare, present, and negotiate proposals, quotes, and contracts, ensuring all payload and application requirements are met.

- Negotiate terms and conditions with customers to ensure alignment with company policies while securing favorable agreements.

- Handle objections and challenges to close deals effectively.

5. Customer Relationship Management:

- Build and maintain strong relationships with key decision-makers and stakeholders in target accounts.

- Conduct meetings, presentations, and product demonstrations to highlight the benefits and value of AMR solutions.

- Serve as the main point of contact for customers, providing post-sales assistance as needed.

6. Collaboration with Technical Teams:

- Work closely with technical experts to develop tailored solutions and presentations that meet customer requirements.

- Utilize technical insights to strengthen the value proposition and enhance the competitive edge of AMR solutions.

Requirements:

• Ability to read mechanical drawings
• Ability to read basic electrical schematics
• Basic programming skills preferrably in Python or C/C++
• Excellent reporting writing and communication skills

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

C&S Resident Technical Officer

Institution Project at Dover

Job Description:

• Assist RE/Consultant Team to attend to technical and design issues at site and report issues to RE/Consultant Team
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Commencement of work on 1 December 2024.

Job Requirement:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years working experience as a Resident Technical Officer.
• Preferably with experiences in Institution projects.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.