• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

The Deputy Technical Manager is responsible for all technical operational activities for building/ civil & infrastructure engineering projects, managing the technical department as well as providing engineering & planning services for tender and support services to projects.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress
• Coordinate and support the construction and other departments within the project to fulfil design requirement
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications
• Adherence to safety practices in the work place

Value Add of Position

• Excellent client facing with strong people orientation ability to build and develop positive relations
• Possess strong skill in developing and delivering effective communication to different audiences
• Able to lead and inspire high performance, to ensure project plans are implemented on a timely, efficient and effective basis

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognised university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 8 years of engineering experience in delivering large scale projects

Role: Devops Technical Architect

JD:

We are looking for a seasoned AWS Technical Architect to design, implement, and optimize our cloud infrastructure on AWS. The ideal candidate will have extensive experience with AWS services, infrastructure automation using Terraform, and in-depth knowledge of networking, compute, storage, database, monitoring, and alerting solutions. This role is critical to ensure our cloud infrastructure is secure, scalable, and efficient.

Required Experience:

• Extensive experience in AWS services
• Infrastructure automation using Terraform
• Strong understanding of GCC and IM8 policies
• Experience with advanced AWS tools and frameworks like Kinesis, Chime, OpenSearch, and Generative AI (GenAI) using Retrieval-Augmented Generation (RAG) is highly valued.

Key Responsibilities

Cloud Architecture and Design:

• Design and implement highly available, resilient, and scalable architectures on AWS, including networking, compute, storage, and database solutions.
• Architect solutions that leverage AWS best practices for security, cost optimization, and performance.

Infrastructure as Code (IaC):

• Develop, maintain, and manage Terraform configurations for automated provisioning and management of AWS resources.
• Implement best practices in version control, modularization, and reuse to ensure IaC maintainability and scalability.

Networking and Security:

• Design secure VPC architectures, subnets, routing, VPNs, and peering connections for multi-region and hybrid environments.
• Manage security groups, network ACLs, and identity access management (IAM) to ensure a secure AWS environment.

Compute, Storage, and Database Solutions:

• Leverage AWS services like EC2, ECS Fargate, and Lambda for compute workloads, based on application needs.
• Design scalable storage solutions using S3, EBS, and EFS.
• Architect and optimize database solutions with RDS, DynamoDB, and Aurora.

Monitoring, Logging, and Alerting:

• Implement monitoring, logging, and alerting solutions using CloudWatch, CloudTrail, and the ELK Stack (Elasticsearch, Logstash, and Kibana) to ensure observability and troubleshooting capabilities.
• Set up proactive alerts and monitoring for performance and security issues to minimize downtime and optimize performance.

Key Responsibilities:

• Interacts with clients on site and remote to meet complex requirements of a solution.
• Escalates unresolved problems and issues to the relevant third parties.
• Responds to escalated client requests.
• Escalates complex problems to the relevant third parties.
• Writes reports and proposals and completes and maintains project documentation.
• Assists with the documentation of standard operating procedures relating to installations and fixes.
• Acts as coach and mentor to more junior Implementation Engineers and Technicians.
• Assumes responsibility for the coordination of the activities of the junior Engineers, in line with performance targets.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Performs any other related task as required.

Knowledge and Attributes:

• Seasoned understanding and appreciation of technical design and business principles.
• Seasoned project fundamental and administration ability.
• Seasoned project skills which are demonstrated in the execution of installations and other assignments.
• Excellent customer engagement skills
• Demonstrate relevant domain specialist knowledge.
• Excellent verbal communication skills.
• Client focused and displays a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.

Academic Qualification and Certifications:

• Bachelor's degree or equivalent in Information Technology or Computing or a related field.
• Professional level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNP, JNCIS, ACMP etc.
• Cisco Dev Net certification

Required Experience:

• Seasoned work experience in technical implementation engineering, specific to Networking technologies.
• Seasoned experience engaging with clients and conducting presentations.
• Seasoned report writing experience.
• Seasoned project management
• Seasoned experience in Networking technologies such as routing, switching, Wireless, SDI distribution, core and access layers
• Seasoned experience in diagnosis and troubleshooting

We are seeking a highly skilled Senior Technical Specialist to join our team and serve as a key technical authority within our organization. This role requires a deep understanding of technical systems, hands-on expertise, and the ability to drive projects forward while mentoring other team members. The Senior Technical Specialist will collaborate with cross-functional teams to design, implement, and maintain high-quality solutions aligned with our strategic objectives.

Key Responsibilities:

Technical Expertise and Problem Solving

Act as the primary technical expert, diagnosing and resolving complex issues.
Develop robust solutions that optimize performance, scalability, and security.
Project Leadership and GuidanceLead technical projects from concept to implementation, ensuring alignment with goals and timelines.
Mentor and support junior team members, fostering skill growth and development.
System Design and ArchitectureContribute to the architecture and design of systems and applications, ensuring solutions meet both current and future business needs.
Review and approve technical designs from team members to maintain quality and consistency.
Process Improvement and InnovationIdentify and implement process improvements, including automation and workflow enhancements.
Evaluate and recommend new technologies that drive innovation and competitive advantage.
Stakeholder Collaboration and SupportCollaborate with cross-functional teams to understand requirements and deliver effective solutions.
Communicate complex technical concepts in an accessible manner to non-technical stakeholders.
Documentation and Knowledge SharingCreate and maintain comprehensive documentation, including system designs and troubleshooting guides.
Facilitate knowledge sharing through training sessions and technical workshops.
Risk Management and ComplianceAssess risks associated with technical implementations and develop mitigation strategies.
Ensure compliance with industry standards and regulatory requirements, conducting technical audits as needed.

Job Specifications/Requirements:

• Minimum 1 year of working experience on the administrative functionality of Google Workspace.
• Fluent in English, spoken and written.
• Experience using GAM, specifically for housekeeping (storage, classroom assignment or setup)
• Proficient in programming languages such as PHP, Python, Google Apps Script
• Minimum Google Workspace Administrator certification or ChromeOS Administrator certification - if not already certified, selected candidate will need to obtain certification within 3 months of employment
• Degree/Diploma in EEE/IT/Computer Science or equivalent
• Good analytical capability
• Good interpersonal skills and strong team player
• Independent and self-motivated
• Comfortable with facing customers virtually (video/voice calls) or onsite and have a friendly disposition
• Able to gather information from customers and resolve their pain points
• Fast learner with the ability to pick up new skills/products quickly
• Able to pick up new skills in Google Workspace/Cloud/Chrome related products when required

Bonus to have

• Integration experience of Google Workspace with identity management systems (such as OpenID, Okta, Microsoft AD, etc)
• Basic knowledge of PHP or any common scripting language
• Google Workspace Administrator certification
• ChromeOS Administrator certification
• Proficiency in AWS and/or Google Cloud Platform

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

1. Performs all works assigned by the Project Director/Associate/Architect/Team Leader to meet the established project objectives (quality and standards) diligently.

2. Reporting to Project Associate/Director on all matters pertaining to design, technical and building code issues.

3. Assist in documentation during Conceptual & Detail Design Development stage.

4. CAD or manual drafting of sketch drawings.

5. Understanding & applying Building Regulations as directed by the Project Associate/ Architect.

6. Able to support, prepare and co-ordinate Autocad / BIM drawings for authorities' submissions via Corenet / Portal

7. Liaising with Consultants on matters of design & technical co-ordination issues and building regulations.

8. Attending Consultants/Site Meetings on matters of design & technical co-ordination issues and building regulations.

9. Works and coordinates with fellow team members on collective assignments.

10. Familiar with local code, regulation, and authority submission

Requirements:

• Diploma/ Degree in Architecture / Interior Design or related field.
• Proficiency in AutoCAD, Revit (or other relevant design software). PowerPoint and sketchup for presentation will be advantaged.
• Ability to adapt to changing project demands and deadlines.
• Ability to work in a team environment
• Excellent communication and interpersonal skills.
• Experience in all aspects of Design from concept through construction will be an advantage.
• Possess excellent technical design skills with an eye for details.
• Keen eye for aesthetics, sensitive in details design with a good knowledge of building materials.

Minimum 5-8 years relevant working experience will be preferred.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

*Please note that working hours for this role is 56 hours/week

Summary

At Apple, we combine product management/development and product marketing responsibilities into a single, cross functional Product Management team that collaborates with design, engineering, finance, legal, marketing communications, public relations, market research, sales and support for maximum impact across the organization. The International Product Marketing team in [x Geo] is looking for a Technical Marketing Specialist to work on Apple’s thrilling product launches and ongoing marketing efforts. The candidate is expected to provide technical consultation and operational support for the Product Marketing organization. This includes support for Apple's product launches and press briefings, internal testing of Apple devices, as well as product and feature qualification of new Apple hardware. This role is part of the International Product Marketing organization - a group of product experts who champion products within their respective markets and seek innovative ways to keep our products at the heart of the customer conversation. The International Product Marketing organization lays the foundation for Apple's peerless demonstrations, presentations, and briefings. We are passionate about our products and we’re looking for a highly motivated individual to provide best-in-class technical support to our marketing initiatives.

Description

• Support the introduction of new products by collaborating with product managers providing technical expertise to ensure products receive the launch they deserve
• Streamline processes to help Product Marketing efficiently prepare for launches within ongoing marketing efforts, including product briefing and experiential events
• Conduct hardware and software testing in partnership with Product Marketing
• A strong sense of individual ownership and responsibility is required, while working in a team environment
• Troubleshoot devices
• Become a visible and vocal member of the Product Marketing team

Minimum Qualifications

• Experience with both iOS and macOS, as well as Apple hardware
• Ability to travel up to 50%

Preferred Qualifications

• Experience with scripting is highly favorable
• Solution and process-oriented independent thinker with a strong eye for detail
• Proficient written and verbal communication with the ability to tailor communication to different audiences
• Creative and ambitious thinking is highly encouraged

You will be an integral part of the business development team and in bringing the company forward to the next growth.

Job Description

• Formulating and leading presales technical/functional support activity to prospective clients and customers while ensuring customer satisfaction.
• Advises internal teams and external clients on overall architect solutions.
• Facilitation of client product/application understanding through presentations demonstrations and benchmarks; provision of support throughout the sell cycle
• Ability to do rapid prototyping
• Create presentations and design architecture and/or infrastructure diagrams to present solutions to customer executives
• Working directly with clients to understand their business strategy, programme requirements & processes
• Formulation of high-quality bids and proposals
• Providing knowledge transfer to the delivery teams to ensure a smooth handover from sales to delivery
• Develops and delivers outstanding presentations and demonstrations.

Qualifications

• Deep functional knowledge of Microsoft .Net, and Content Management Solutions & integrations
• Experience with AWS and / or Microsoft Azure
• Experience with Public Sector projects will be advantageous
• Experience in preparation of proposals, responses and contracts
• Experience of developing creative and client-pleasing solutions to complex business problems
• Relevant Microsoft, AWS certifications will be advantageous
• Excellent working knowledge of Solution and Integration Design
• Attention to detail
• Ability to multitask and prioritise
• Excellent interpersonal skills

Responsibilities:

• Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design.
• Ensures major hazards are identified, adequately assessed, evaluated, and managed in accordance with relevant statutory, client and project specific requirements.
• Identifies safety engineering elements are not fully integrated into the design and propose solutions to rectify the situation.
• Identifies change in regulatory requirements and advise relevant departments of requirements to comply.
• Develop specifications, terms of reference and scopes of work for specific safety engineering studies.
• Gather necessary information and provide inputs to safety studies.
• Develop or supports safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD,
• Knowledge of Fire & Gas Detection, Fire Fighting Develop or support functional safety management: FSMP, SRS
• Supports the development of ESD and F&G Cause & Effect design.
• Leads hazardous area classification studies, Writes procedures, specifications, and material.

Requirements:

• Degree in Chemical/Petroleum Engineering with relevant experience in Process/Technical Safety
• Engineering degree with a Master's or Diploma in Process Safety and Risk Engineering, and experience in Technical Safety will be strongly considered.
• 3 years of relevant working experience
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem areas

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem areas

Job Description

Program Management and Customer Interface

Act as the main point of contact for Key Account Customer(s), managing all technical communications, status updates, and program-related inquiries.Define project scope, objectives, and success metrics in close collaboration with K&S and align cross-functional teams within Akribis Systems to meet these objectives.Develop, track, and manage detailed project plans, timelines, and milestones, ensuring transparency and accountability throughout the project lifecycle.

New Product Introduction (NPI)

Lead new product introduction projects for K&S, coordinating closely with engineering, production, quality assurance, and supply chain teams to ensure on-time and on-spec delivery.Collaborate with K&S on design specifications and performance requirements, ensuring that Akribis meets the technical and operational needs of the customer.Identify and mitigate project risks, ensuring potential issues are proactively addressed to minimize impact on project timelines and quality.

Engineering Change Management (ECM)

Oversee engineering change management (ECM) processes for Key Account Customer(s)' projects, ensuring all modifications are smoothly integrated and communicated to relevant stakeholders. Coordinate with production, quality, and supply chain teams to ensure seamless implementation of engineering changes and compliance with customer requirements.Document and track engineering changes, ensuring alignment with both Akribis’s standards and Key Account Customer(s)’s requirements.

Technical Alignment and Decision Making

Facilitate technical discussions between Akribis and Key Account Customer(s), ensuring all stakeholders understand project requirements, objectives, and progress.Serve as a technical advisor to internal teams, aligning customer requirements with Akribis’s capabilities and solutions.Drive decision-making processes related to technical aspects, balancing customer requirements with feasibility, cost, and quality.

Continuous Improvement and Process Optimization

Identify areas for process improvement and implement changes to enhance project efficiency, product quality, and cost-effectiveness.Utilize feedback from Key Account Customer(s) and internal stakeholders to continuously refine program processes and customer engagement strategies.Implement metrics to monitor program performance, analyzing data to identify trends, address issues, and support strategic goals.

Documentation and Reporting

Develop and maintain detailed documentation of project plans, schedules, risk assessments, and change orders for full transparency and traceability. Provide regular reports, updates, and technical reviews to Key Account Customer(s) and Akribis leadership, ensuring all parties have a clear understanding of project status.Maintain organized and accessible project documentation to support quality audits, compliance, and future reference.

Qualifications

• Bachelor’s degree in Engineering, Program Management, or a related technical field;
• Master’s degree is preferred.
• Minimum of 5 years in technical program management, project management, or engineering, preferably within semiconductor or precision engineering industries.

Other Information

Skillset(s) Requirement:

Technical Skills:

Strong understanding of project management methodologies (Agile, Waterfall) and proficiency in ERP/PLM systems.Experience managing complex technical programs, including new product introductions and engineering change management.Familiarity with technical drawings, engineering specifications, and quality control standards.

Customer Management Skills:

Demonstrated experience building and managing key customer relationships, with a focus on aligning deliverables to customer expectations.Analytical Skills: Strong problem-solving skills, with the ability to analyze program performance data and drive continuous improvement.

Communication Skills:

Excellent verbal and written communication skills to interact effectively with cross-functional teams and customers.

Organizational Skills:

Strong organizational skills, with a proven ability to prioritize and manage multiple projects simultaneously. Preferred Skills and CompetenciesPMP or Program Management certification is a plus.Experience in Lean, Six Sigma, or other continuous improvement methodologies.Familiarity with the semiconductor industry and engineering change management processes.Proficiency in project management software (e.g., SmartSheet,Microsoft Project, Jira) and ERP systems (e.g., SAP).

Roles & Responsibilities

Key Objectives:

• To be part of the initial project delivery team to architect the solution design and de-risk the project.
• Analysis of business requirements.
• Design and implementation of full solutions.
• Identify integration issues and develop solutions to these issues.
• Coach and develop skills within a project team.
• Work effectively in mixed client and consultancy teams.

Role Competencies:

• Detailed knowledge of business requirements and solutions in their focus area (Technology, Industry, or LOB.
• Mobilise and motivate a project team.
• Ability to organize and coordinate diverse groups in complex situations.
• Broad content experience across multiple lines of business.
• Broad technical appreciation, including ALL key SAP functionality and technology, and the ability to assess new technology solutions rapidly.
• Lead functional/technical architecture in complex SAP and non-SAP environments.
• Support the Programme Director in developing phasing strategy, plans, benefits cases, organizational structures,risks, and issues.
• Manage design workshops on multiple areas of expertise.
• Command the respect and confidence of other Solution Architects, Solution Directors, and the Commercial Team.
• Ability to develop HCL Axon’s methods and tools and contribute to Solution Team strategy.

Job Requirements:

• Minimum Bachelor's Degree in Computer Science/Information Technology/ Engineering or any relevant.
• Minimum 10 years+ of experience.
• Strong SAP implementation experience within the Asset Management line of business and cross-modular experience in PM/CS/PS/QM/A&D INDUSTRY SOLUTIONS etc.
• Knowledge of integration between PM and MM/HR modules.
• Maintenance Repair & Overhaul experience within asset-intensive industries.
• SAP EAM/MRO implementation experience - with 1project lifecycle.
• Experience in the implementation of SAP S/4HANA projects with architecture skills.
• Experience in implementing SAP solutions for the maintenance of assets in highly regulated environments
• Knowledge of HCL iMRO solutions.

Roles & Responsibilities

Key Objectives:

• To be part of the initial project delivery team to architect the solution design and de-risk the project.
• Analysis of business requirements.
• Design and implementation of full solutions.
• Identify integration issues and develop solutions to these issues.
• Coach and develop skills within a project team.
• Work effectively in mixed client and consultancy teams.

Role Competencies:

• Detailed knowledge of business requirements and solutions in their focus area (Technology, Industry, or LOB.
• Mobilise and motivate a project team.
• Ability to organize and coordinate diverse groups in complex situations.
• Broad content experience across multiple lines of business.
• Broad technical appreciation, including ALL key SAP functionality and technology, and the ability to assess new technology solutions rapidly.
• Lead functional/technical architecture in complex SAP and non-SAP environments.
• Support the Programme Director in developing phasing strategy, plans, benefits cases, organizational structures,risks, and issues.
• Manage design workshops on multiple areas of expertise.
• Command the respect and confidence of other Solution Architects, Solution Directors, and the Commercial Team.
• Ability to develop HCL Axon’s methods and tools and contribute to Solution Team strategy.

Job Requirements:

• Minimum Bachelor's Degree in Computer Science/Information Technology/ Engineering or any relevant.
• Minimum 10 years+ of experience.
• Strong SAP implementation experience within the Asset Management line of business and cross-modular experience in PM/CS/PS/QM/A&D INDUSTRY SOLUTIONS etc.
• Knowledge of integration between PM and MM/HR modules.
• Maintenance Repair & Overhaul experience within asset-intensive industries.
• SAP EAM/MRO implementation experience - with 1project lifecycle.
• Experience in the implementation of SAP S/4HANA projects with architecture skills.
• Experience in implementing SAP solutions for the maintenance of assets in highly regulated environments
• Knowledge of HCL iMRO solutions.

Location: Near Commonwealth MRT

Working Hours: 8:30 AM to 5:45 PM (Monday to Friday)

Salary Range: S$3,200 – S$3,500

Onboard Vessel Job Allowance: S$50 per job (1-2 times every 2 months, typically during working hours) and off-in-lieu if is after working hours.

Transport fees reimbursed on a claim basis

Job Responsibilities:

• Provide on-site technical support and prepare detailed inspection reports
• Address technical queries from colleagues and provide internal technical training
• Support sales-related tasks, including quotations and order processing
• Assist engineers with various projects as required

Requirements:

• Diploma/Degree in Engineering (preferably Mechanical)
• Entry-level candidates are encouraged to apply; relevant experience will be considered an advantage
• Strong interest in technical processes and systems
• Detail-oriented, organized, and able to handle multiple projects simultaneously
• Hands-on approach and willingness to conduct vessel inspections as needed
• Occasional overseas travel may be required

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

Responsibilities

• Translation of business requirements from internal stakeholders in high quality Application Design.
• Analyze and translate business requirements into documentation, product rules and draft concise and detailed technical and functional solution documents for development.
• Ensure the completeness of the business requirements and add value by proposing best-in-class solutions.
• Providing inputs to operational considerations related to Temenos platforms in particular T24.
• Deep understanding of the private banking modules like SC, DX, SY, Corporate actions and accounting/ reporting modules.
• Implementation experience of the SWIFT messaging, interfacing patterns, STP processes, order-processing flows.
• Excellent personal organization and ability to prioritize and carry out multiple tasks. Able to influence and drive projects to meet key milestones and overcome challenges.
• Able to translate functional requirements to efficient and fit-for-purpose technical solutions.
• Working with the Business users and Product owners for different strategic solutions.

Skills Requirements

• Bachelor’s or Master’s degree in Engineering/Technology or related course.
• 7 - 10 years of development experience in T24 platforms as well as in providing solutioning expertise to the Development team.
• Exposure to Latest T24 release R19+ and to T24 Upgrade processes.
• T24 performance optimization and T24 data Archiving.
• Experience with Tivoli, Dynatrace, Splunk or similar tools for logging and monitoring.
• Oracle DB concepts relevant to T24, Linux scripts.
• Understanding of deployment architecture and infrastructure.
• Experience in T24 Upgrades and data migration best practices.
• Possess excellent communication, written, oral and interpersonal skills.
• Experience working in Agile environment.

Good to have

• Expertise in T24 R16 and higher.
• Expertise in TAFJ R16 and higher.
• Multi-Company set-up and multi-app server set-up.
• Hands on with Design Studio, Source code repository, Job schedulers, SQL developer.
• Experience in Temenos Unit Test framework.
• Exposure to Integration framework and Interaction framework (IRIS), MQ, JBOSS.
• Understanding on T24 COB and Services framework.

Responsibilities

• Translation of business requirements from internal stakeholders in high quality Application Design.
• Analyze and translate business requirements into documentation, product rules and draft concise and detailed technical and functional solution documents for development.
• Ensure the completeness of the business requirements and add value by proposing best-in-class solutions.
• Providing inputs to operational considerations related to Temenos platforms in particular T24.
• Deep understanding of the private banking modules like SC, DX, SY, Corporate actions and accounting/ reporting modules.
• Implementation experience of the SWIFT messaging, interfacing patterns, STP processes, order-processing flows.
• Excellent personal organization and ability to prioritize and carry out multiple tasks. Able to influence and drive projects to meet key milestones and overcome challenges.
• Able to translate functional requirements to efficient and fit-for-purpose technical solutions.
• Working with the Business users and Product owners for different strategic solutions.

Skills Requirements

• Bachelor’s or Master’s degree in engineering/Technology or related course.
• 11 - 14 years of development experience in T24 platforms as well as in providing solutioning expertise to the Development team.
• Exposure to Latest T24 release R19+ and to T24 Upgrade processes.
• T24 performance optimization and T24 data Archiving.
• Experience with Tivoli, Dynatrace, Splunk or similar tools for logging and monitoring.
• Oracle DB concepts relevant to T24, Linux scripts.
• Understanding of deployment architecture and infrastructure.
• Experience in T24 Upgrades and data migration best practices.
• Possess excellent communication, written, oral and interpersonal skills.
• Experience working in Agile environment.

Good to have

• Expertise in T24 R16 and higher.
• Expertise in TAFJ R16 and higher.
• Multi-Company set-up and multi-app server set-up.
• Hands on with Design Studio, Source code repository, Job schedulers, SQL developer.
• Experience in Temenos Unit Test framework.
• Exposure to Integration framework and Interaction framework (IRIS), MQ, JBOSS.
• Understanding on T24 COB and Services framework.

Responsibilities

• Translation of business requirements from internal stakeholders in high quality Application Design.
• Analyze and translate business requirements into documentation, product rules and draft concise and detailed technical and functional solution documents for development.
• Ensure the completeness of the business requirements and add value by proposing best-in-class solutions.
• Providing inputs to operational considerations related to Temenos platforms in particular T24.
• Deep understanding of the private banking modules like SC, DX, SY, Corporate actions and accounting/ reporting modules.
• Implementation experience of the SWIFT messaging, interfacing patterns, STP processes, order-processing flows.
• Excellent personal organization and ability to prioritize and carry out multiple tasks. Able to influence and drive projects to meet key milestones and overcome challenges.
• Able to translate functional requirements to efficient and fit-for-purpose technical solutions.
• Working with the Business users and Product owners for different strategic solutions.

Skills Requirements

• Bachelor’s or Master’s degree in engineering/Technology or related course.
• 12 - 15 years of development experience in T24 platforms as well as in providing solutioning expertise to the Development team.
• Exposure to Latest T24 release R19+ and to T24 Upgrade processes.
• T24 performance optimization and T24 data Archiving.
• Experience with Tivoli, Dynatrace, Splunk or similar tools for logging and monitoring.
• Oracle DB concepts relevant to T24, Linux scripts.
• Understanding of deployment architecture and infrastructure.
• Experience in T24 Upgrades and data migration best practices.
• Possess excellent communication, written, oral and interpersonal skills.
• Experience working in Agile environment.

Good to have

• Expertise in T24 R16 and higher.
• Expertise in TAFJ R16 and higher.
• Multi-Company set-up and multi-app server set-up.
• Hands on with Design Studio, Source code repository, Job schedulers, SQL developer.
• Experience in Temenos Unit Test framework.
• Exposure to Integration framework and Interaction framework (IRIS), MQ, JBOSS.
• Understanding on T24 COB and Services framework.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

With the business expansion, we're looking to hire a Singapore based Technical Sales Engineer to look after key accounts.

For this role, you will need to

• Build and maintain rapport with existing and potential clients, partners and other stakeholders.
• General sales leads and lead technical and commercial discussion.
• Attend regional marketing event/networking session.
• Gather and analyse on customers/competitors' activities/products/industry developments and compile market intelligence reports, work closely with product development team to fulfill client's requirement.
• Deliver product presentations to current and potential clients.

Job requirement

• Degree/Diploma in any field (engineering related major is preferred).
• At least 2 years of sales experience within engineering space, candidates with technical background are welcome to apply.
• Team player and independent, good communication skills.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Role:

• Assist in preparing and reviewing technical reports and maintenance records.
• Support the Fleet Manager in organizing and monitoring maintenance schedules and repair activities.
• Track and address technical issues, ensuring timely resolution and proper documentation.
• Update and maintain technical documentation, including manuals, compliance certificates, and safety records.
• Ensure vessel operations adhere to maritime regulations and industry standards.
• Assist in preparing documentation for inspections, audits, and regulatory evaluations.
• Serve as a point of contact between ship management, crew, and shore-based technical teams.
• Coordinate with suppliers and contractors for procuring parts and services, when required.
• Arrange and participate in technical meetings, providing necessary support.
• Assist in analyzing technical data to identify trends and suggest improvements.
• Contribute to the development and implementation of technical procedures and best practices.
• Provide support during emergencies, such as technical failures or incidents, aiding in troubleshooting and resolution.

Requirements:

• Degree or diploma in Marine Engineering, Mechanical Engineering, or a related discipline.
• Previous experience in ship management, marine engineering, or a related technical field is advantageous.
• Solid understanding of shipboard systems and technical operations.
• Competence in handling technical documentation and managing data.
• Strong communication and coordination abilities.
• Capable of managing multiple tasks under pressure.
• Relevant maritime certifications or qualifications are desirable.