Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to support the implementation of the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.
• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.
• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.
• Contribute necessary improvements and offer advice about operational procedures.
• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications
• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.
• Work with the Service Department to resolve enquiries, if required.
• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.
• Able to travel in short notice.
• Physically capable and available to work overtime including weekends and public holidays.
• Good verbal communication skill.
• Ensure a safe working environment.
• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.
• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).
• Desirable overtime allowance after probation period.

Work Arrangements

• AM Shift (7AM to 430PM)
• PM Shift (430PM to 130AM) $25 Dollar shift + transport back home
• Rotating swing shift (mix or AM & PM)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical or Electrical Engineering
• Relevant experience would be advantageous
• Relevant internship / academic background would be considered

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Integrated DNA Technologies (IDT) is the leading manufacturer of custom oligonucleotides and proprietary technologies for genomics applications. Our work is complex and cutting-edge, and our team members are curious, creative thinkers who understand that good data drives smart decisions. At IDT, we realize that although science may be uniform, people are unique. We promote a culture where engaged people are motivated and have opportunities to achieve their full potential, as part of one global team.

IDT is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

This position is part of the Manufacturing & Operations located in Singapore and will be on-site (Mid Shift: 1pm - 10pm). At IDT, we are one global team. We celebrate our differences, engage in healthy debate, and are inclusive. Together, we accomplish great things

In this role, you will have the opportunity to:

• Accurately uses aids and work instructions to make decisions about the proper production flow based on product type or services.
• Prepares materials according to documented procedures using standard lab equipment and maintains accurate and detailed product, process, instrument, and training records.
• Performs lab cleaning and decontamination protocols in accordance to work instructions and maintenance connection software, as well as maintains electronic records of tasks to ensure that work is performed in an accurate, efficient, and appropriate manner.

The essential requirements of the job include:

• Minimum N/O level, Nitec in a Science related field or equivalent by relevant experience.
• Proficient computer skills which include knowledge of the internet, Microsoft Excel and Microsoft Word.

It would be a plus if you also possess previous experience in:

• Previous laboratory and chemical handling experience. (Preferred)
• Basic knowledge in manufacturing practices.

Summary

The Field Technician is responsible for outdoor onsite repairs of machines, and also training and delivery of new machines.

Primary Responsibilities

• Repair of cleaning machines, e.g. vacuum cleaner, high pressure jet, auto scrubbers etc
• Checking and repairing of customer’s machines onsite
• Delivery of new machines and training of customers
• Picking up and returning of workshop machines
• Maintain and clean own technical van issued
• Weekend standby duties (on rotation basis)
• Other duties as assigned

Additional Responsibilities

• Servicing of machines in workshop as required
• Assist in setting up of machines in warehouse
• Assist in deliveries as required
• Perform repair, maintenance and troubleshooting task both outdoors & indoors

Knowledge and Skill Requirements

• Minimum NTC,NITEC or Technical Trade
• Basic reading, writing and maths in English required
• Valid Singapore Class 3 license
• Familiar with Singapore roads
• Able to read electrical diagrams
• Experience in field service
• Experience with mechanical and electrical repairs (e.g. repairing vehicles, motorcycles, forklifts, etc.)

Role:

Lab Technician (Waste Water Treatment / Joining Bonus)

• Singapore Based (Tuas) - Transport provided in west MRT station / Transport allowance $120 if possess own transport
• Monday to Friday (8am to 5pm), Saturday 8am to 12pm
• $2400 to $2700
• Diploma in Chemistry/Chemical Process Technology.
• Career Progression Opportunities

Requirements

• Diploma in Chemistry/Chemical Process Technology
• Experience in handling of analytical instruments and AAS

Job scope:

• Carry out analytical testing of incoming, in-process, outgoing materials including
• by products in accordance to SOP in a timely manner
• Issuance of Certificate of Analysis and sample retention management
• Perform basic calibration and maintenance of equipment
• Ensure proper documentations of results, equipment and consumables
• Implement 5S and ensure a safe working environment

Interested applicants can send your resume to [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Senior Lab Technician

Working Days: Monday to Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,800 – $3,100 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: Gul Circle

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at City Hall, may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities
To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
To ensure that the related documentations are updated and ready for ISO audit.
To cooperate with the safety department and carry out the assigned duties within the safety framework.
Assist site management team in project Planning & coordination.
Plan and schedule work sequences for construction operation.
Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
To study tender / construction drawings, specifications, and contracts to understand project requirements.
Understanding of critical project criteria related to schedule & productivity.
Able to provide guidance to new staff / junior staff.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Service Technician

• Salary: $2000 - $3800 ( depend of experience)
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Location: Tuas, Transport provided in west MRT station / Transport allowance $120 if possess own transport
• Basic: $2400 to $2700
• Working hours: Monday to Friday (8am to 5pm), Saturday 8am to 12pm

Requirements

• Diploma in Chemistry/Chemical Process Technology
• Training Provided, Entry Level Welcomed
• Experience in handling of analytical instruments and AAS

Job scope:

• Carry out analytical testing of incoming, in-process, outgoing materials including
• by products in accordance to SOP in a timely manner
• Issuance of Certificate of Analysis and sample retention management
• Perform basic calibration and maintenance of equipment
• Ensure proper documentations of results, equipment and consumables
• Implement 5S and ensure a safe working environment

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Senior Lab Technician

Working Days: Monday to Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,800 – $3,100 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: Gul Circle

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Lab Technician cum Academic Executive needed!

Location: Holland Village Campus

Salary range: S$2200 - S$2800 (commensurate with experience)

Working hours: Mon-Fri 8.30am to 6pm

Responsibilities:

• Render technical support for the laboratories and to assist Teachers in the day-to-day running of the science laboratories
• Planning monthly lab schedule for all laboratories lessons
• Preparing monthly lab reports
• Doing set up, trial and demonstration for all experiments
• Monthly inventory list and stock taking for equipment, chemical and lab coat
• Purchase of chemicals and apparatus
• Prepare teaching materials for new intakes
• Purchase of Academic Resources like books, stationery & teachers' resources
• In charge of textbook collection by students or parents
• Ensure new teachers have their teaching resources during induction
• Taking care of the well-being of students
• Assisting with the Academic department in documentations such as arranging of relief teachers, sending memos/circulars to teachers, prepare teaching materials, exams materials etc
• Other duties as assigned by Management
  

Requirements:

• Relevant working experience in a school lab environment preferred
• Able to work independently as well as a good team player
  

How to Apply?

Send in your resume to: HR @ DIMENSIONS.EDU.SG & indicate in the subject as "Lab Technician cum Acad".

We regret that only shortlisted candidates will be notified.

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

Position: Lab Technician / Lab Assistant (Surface Finishing Chemical)

• Location: Tuas South Drive (Company transport from Boon Lay MRT)
• Working Day: 5 Days 830am-530pm
• Salary : $1800-$3000

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

Responsibilities

• Perform quality control daily
• ⁠Prepare standard solution and acids
• ⁠Handling chemical of plating industry
• ⁠Maintain lab cleanliness
• Carry out various testing procedures relating to customer needs

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Job Responsibilities:

• Operate, maintain, and repair central chiller plant equipment, including chillers, cooling towers, pumps, and related components.
• Carry out preventive maintenance of properties and attend to all work orders issued by tenants and management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• Maintain and monitor building systems
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to plumbing, sanitary installations, fire sprinkler, alarm systems, lifts and escalators etc

Key Requirements:

• Minimum 5-7 years of related building maintenance experience
• Skilled in Building Works, M&E, Air-Con and/or Electrical
• Independent, proactive and responsible team player
• Flexibility to work shift hours
• Effective communication skills to work collaboratively within a team and communicate with tenants and management.

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Roles and Responsibilities

- Office working hour: 8.30AM – 5:30PM

- Scan & update of Service Report to NAS

- Scan & update of Incoming DO/AWB/INVOICE from Suppliers to NAS

- Update Records of Verification

- Update the inventory in Financio

- Deliver goods to customers when required

- Onsite support: Onsite PM & troubleshooting of RADIOLOGY EQUIPMENTS, DIAGNOSTIC MONITORS & PC & ACCESSORIES, NURSE CALL SYSTEM, OPERATING LIGHT

- onsite DVD/USB counter record update & sign the log check with customer on monthly basis

- onsite support, Preventive Maintainance & troubleshooting of automatic dicom DVD/USB burner & PACS system

- contact customer to resolve pending case id on daily basis

- prepare & Report of technicaL GUIDELINES

- Provide technical information for pre-bid and tender specifications

- Completes timesheets within the allocated time frame

- Roster standby support of after office work when REQUIRED (HAVING OT PAYMENT)

Requirements

- Basic knowledge of Microsoft Office & Computer

- Basic technical skill of self learning & researching

- Basic soft skill of communication with peers & customers

- Punctual & commitment with assigned tasks

- Able to work under pressure & short notice requirement

Job Description

• Assist the Supervisor with General Repairs, Installations, Technical Services, Maintenance and Equipment.
• Support technical services and perform troubleshooting to identify and solve issues.
• Follow safety protocols and adhere to company guidelines during tasks.

Job Requirements

• At least 1 YEAR basic technical knowledge / working experience, Candidate with NO prior experience are welcome to APPLY
• WITH VALID SINGAPORE CLASS 3 DRIVING LICENSE
• TRAINING will be provided
• Ability ro follow instructions and work efficiently under supervision
• Able to start work immediately or within short notice

Service Technician

• Salary: $2000 - $3800 ( depend of experience)
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Senior Lab Technician

Working Days: Monday to Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,800 – $3,100 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: Gul Circle

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Service Technician

• Salary: $2000 - $3800 ( depend of experience)
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Ensure operational knowledge is applied and compliant based on approved Standard Operating Procedures.
• Perform sampling of products from process equipment in accordance with SOP.
• Actively monitor process trend and response to alarms observed on control panel DCS Delta V control system and on PLC HMI.
• Provide inputs for investigation – impact assessment and appropriate CAPA
• Responsible for the completeness and accuracy of all records according to GMP standards.
• Perform routine equipment cleaning (manual cleaning, CIP and COP) as per approved instructions and SOP.
• Responsible for maintaining the upkeep of the plant, perform regular housekeeping of all rooms and ensure issues are highlighted timely ensuring that the plant is always in audit ready mode.
• Manage and ensure proper collection, segregation and disposal of chemical waste in accordance to SOP.
• Ensure a safe work environment in accordance with regulatory and global/local EHS policies
• Sound fundamental understanding of process safety, cleaning changeover recipes and unit operations in API manufacturing.
• Effectively communicate with team members on process status throughout the shift and during handover. Communicates all events/issues effectively with Supervisor.
• Assists in execution of commissioning and validation protocols as required.
• Completes all assigned scheduled trainings, OJT, JSA, ILT and Read and Understand procedures
• Ensures processes are running as per planned schedule with minimal delays. Highlights effectively to shift supervisor if delays are expected.
• Responsible for maintaining good Data Integrity standards.
• Ad-hoc duties as assigned by Supervisor.
• Contribute to the promotion of Antaes services on top of assistance provided to client.

Job Requirements:

• NITEC/ Diploma in Chemical Engineering or equivalent technical related degree is required.
• At least 1 years of experience in working in a chemical or GMP manufacturing environment required.
• Working experience with DeltaV and MES Systems
• Able to work comfortably in 12-hour rotating shift (Day/Night).
• Good problem solving, interpersonal and communication skills.

Role:

Service Technician (Class 3 / Electrical/ Mechanical / Electronic background)

• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

As an Outside Broadcast (OB) Cable Technician, you will play a vital role in supporting the preparation and deployment of OB cables for event coverage, primarily in sports.

This position provides an excellent platform to learn about rigging for broadcasting events and opportunity to travel with the crew after a couple of years of experience. No prior experience is necessary, as we will provide training to handle and prepare the various types of cables and rigging to support our projects.

Key Responsibilities:

• Collaborate with the OB Cable Team to prepare cabling requirements for outgoing shipments to all projects.
• Inspect, troubleshoot, and maintain cables from returning shipments post projects.
• Recoiling and packing of cables on drums, palletizing drums, and storing pallets on designated shelves.
• Test and prepare camera cables (SMPTE, Triax camera), audio looms cables and all engineering cables in general require for the interconnect and interfacing of broadcast equipment.
• Carry out fiber splicing, including using fiber tools and fiber optic test equipment, such as fusion splicer, power meter, and OTDR.
• Inspect fiber optic cables to ensure no defects that could undermine signal strength and performance and repair or re-splice damaged fiber if required.
• Test and prepare various audio, video, and power cables.
• Follow all company health and safety procedures.
• Perform other related duties as required.

Requirements and Qualifications:

• High school diploma or equivalent.
• Able to work in a fast-paced environment.
• Strong work ethic and a team player.
• Physically able to lift up to 20kg or more.
• Flexibility to work weekends and holidays.
• Willingness to work in a warehouse environment.
• Good verbal communication skills.
• Certificate to work at height is a plus.